Printer Setup error: insert the floppy

Similar Questions

• 'Use the cartridges SETUP' error on the printer, need help!

  I bought the printer last year in the months of August and after 6 months of use, it started having problems printing wireless. I always had to use USB to print from my laptop so I was recommended by people in this forum to reset my printer to the factory.

  I have reset several times and nothing worked, so I was advised to do so by using the Cancel button and the middle button that reset the printer. Now the problem is it says "Cartridges use SETUP" and my printer is out of warranty, it expired last month. I'm really confused about what to do. I am a student and I still have the print job and I can't afford a new printer. Calling support has no idea what to do and email support does not because of my warranty as you exhale.

  My printer is a HP Deskjet printer Wireless 3070. Product number is CQ191B.

  I really need help has begun the new year of college and I have a lot of missions to print.

  Hi ExPLOiT786

  Dragon-fur asked me to chime in with this. I will send you a private message on this in order to proceed.

  Ciara

• Error when starting my computer code: there is no disc in the drive. Please insert the floppy disk in drive\Device\Harddisk3\DR3

  I just started getting this error in the last month.  It only happens when I start my computer.  I started to use Windows Live Mail Beta.  Would this have something to do with it?

  The problem was with Windows Live Sync.  Once I have not won, I didn't the message again.

  I'm fairly certain that this has nothing to do with Windows Live Mail beta - but it does not sound like a startup program any want a disc in the drive and that is what causes the problem.

  To boot from the hard drive, first of all, in the boot sequence, you may need to change the BIOS to hard drive first in the boot sequence (it is not always necessary and I have my system set to start first on the CD player and have no problem - but you have problems so we'll see if that fixes the).  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  While there, make sure that there is no setting to boot the disk hard regardless of the boot sequence.  Reset.  Normally, it should start without the error message.

  If this does not work, what is the EXACT (including all codes verbatim) error message?  It refers to a specific file, and if yes, what is the file name?  Are you able to start despite the message or that you need to insert the CD in the drive and then it allows you to start?

  Try to boot into safe mode without any CD in the drive (repeatedly clicking the F8 key during the boot process until the menu appears) and see if it works or if you have the same problem.  If you can start in safe mode, it's a good sign.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  If this does not work, go to start / search area and type msconfig.exe and enter, and double-click on the program icon that appears.  Go to the Startup tab and remove all checks, click OK, close the program and reboot and see if the problem persists.  If this isn't the case, then the problem is caused by something trying to boot at startup, and you may need to add the items back one by one, restarting after each one, until you find the culprit at the origin of the problem.  Then let this disabled element, double-check all the others that you actually want from startup, click OK, close the program and restart.  The problem should be solved.  If it's not working, then go back and re-check items that have been checked, click OK, and save the program and restart.  You'll be back to where you started, but we will have eliminated a very likely cause.

  That's all for now.  I hope this helps.  If the problem persists, I need more information about this message and all the files that he mentions.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• SQL statement error INSERT The conflicted with the FOREIGN KEY constraint

  I recently installed a reporting for vmware vsphere software, but I get a SQL error. I opened a request for assistance with vmware, but so far they have not come up with a solution. The error is caused by: com.microsoft.sqlserver.jdbc.SQLServerException: instruction INSERT The conflicted with the FOREIGN KEY constraint 'FK_CB_VSM_NETWORK_VC_ID '. The conflict occurred in database 'VCChargebackVCC02', table "dbo." " CB_VSM_SERVER', column 'VC_ID '. I don't know a lot about SQL, so I'm lost in the extent of troubleshooting is concerned. If anyone has any ideas I'd love to hear them.

  SQL questions are better posed on Technet.  They are better equipped to manage the

  http://social.technet.Microsoft.com/forums/en-us/categories/

• PIXMA Pro 100, printing setup error

  I am new to printing, I just got my Pixma Pro and so far have had terrible results.  1/10 times I get beautiful prints, the rest are terrible, faded, and as they have a gray film on them.  I think that its either a management or color paper management problem. I try to use 8.5 "x 11"Canon Pixma Photo"with finishing mate.  I print with Photoshop. I have the same problem if I click on Photoshop color handle or manage color printers, but prints nice 1/10 has been made manually setting the document to "glossy" under the menu print settings in Photoshop CS6 instead by selecting Matte is the obvious choice.

  When I chose Photoshop treats color management I get prints of same gray no matter what printer profile I select. Although it seems more logical to choose matte Canon Pro - 100 3 paper photo because it's what I use, once again nice 1/10 prints have been achieved selection Pro 3 Platinum photo paper.

  I don't understand how it works.  The picture I am trying to print is here, green and nice blue. http://www.Flickr.com/photos/27816471@N06/9076033417/in/set-72157634198994950 it seems gray and washed out when I print, sort of like the printer is 1/2 more ink, but he says is not.  Black and gray are good.

  What should I do?  I know its operator error, but I can not re - introduce one of the environment to get decent prints of this, so I'm considering junking or return. really disappointed.

  He is a. (at least on the matte premium.) was a packet of information about 3 x 4 in plastic sleeve, in that the paper is conditioning?

  Should be slightly whiter and not quite as calm as the side back side printing. Very subtle.

• Service Pack 1 Setup error. -The server has failed

  original title: Service Pack 1 Setup error. Windows XP Home 32 bit

  The following occurred during the installation of Service Pack 1a tried to download files from the service pack 1 on the internet:

  The server did not respond.

  This happened again and again I clicked retry. The program tries to connect to http://xpSP1.microsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a

  I also followed the links he is said to take on the web page of the service pack for installation troubleshooting. I am only given a choice to restore the default settings on the automatic updates. I have not automatically updated.

  You try to update a system restore which is now Windows XP 'Or' (without service pack)?

  If so, please read the tips following long-standing MS MVP PA Bear.

  If this isn't the case, please explain what you are trying to do.

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything in the list below, in order, before connecting the machine to the internet or a local network (i.e. other computers) and before you plug in a flash, SD card, or any other external computer diskotherwise:

  1. Make sure that the Windows Firewall is enabled.
  2. Uninstall any moment invalid Norton, McAfee, etc., free version of test which was also reinstalled, run the appropriate removal tool (see below), and then install an application antivirus of your choice (for example, http://www.microsoft.com/security_essentials/default.aspxMicrosoft Security Essentials- free).
  3. Arrival to Windows Update & get the computer fully patched.
  4. Install Windows Defender [Editor's Note: obsolete; do not install] or another anti-spyware application that integrates a real-time protection.

  TIP: Use another and negative computer to download programs for, for example, SP2 or SP3 installation, the installer for your new anti-virus application and or other removal tools cited below. Transfer these files to CD or DVD (not a flash drive) and then transfer the files of the CD or DVD on the desktop of the computer you are using.

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  TIP: After getting the computer fully patched, download/install KB971029 manually before connecting any external drive to your computer: http://support.microsoft.com/kb/971029 [1]

  VERY IMPORTANT! => Any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You need TO uninstall the trial for free AND download/run the appropriate removal BEFORE tool to install updates, the Windows Service Packs, or updates of IE AND BEFORE installing your new antivirus application (for example, Microsoft Security Essentials - free).

  Norton Removal Tool
  FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  =========================================
  [1] in force 08 Feb-11, KB971029 will be offered through Windows Update.

• HP LaserJet Pro 400 M401dn: Printer setup error

  I use this printer for these past two years perfectly, but last week when I changed my laptop start to become more error during installation. My laptop machine specs are also less

  

  Error message

  

  I tried several ways by downloading the latest version of the driver from the HP Web (http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5096261)

  I also try to install optional Smart Install

  Please help me

  Wakeel

  To make this real simple.  Go to the printer and to the control panel of the printer print a config page or network config which will give you the ip address of the printer.  Now on your computer, go to devices and printers and choose the item add printer, then local printer and on the next page, click on the create a new port and in the drop-down menu, choose standard tcp/ip and then click Next.  Type the ip address of the printer and make sure the box to query the printer and automatically select driveris checked and then click Next.  The computer will find the printer and load the required drivers and set up the printer for you.  If this does not work, report back with what happened during the installation (error messages, etc.).

• Printer Setup error "specified port is unknown.

  Original title: printer drivers

  I'm trying to install a printer on my lap top. Starts the load down, but I get a 'found new hardware wizard' screencalled the body, I get an error report "specified port is unknown." Can you help me

  Hello
   
  1. What is the brand and the name of the printer of this printer?
   
   
  If you use the HP printer to refer:
  HP Officejet 6210 all in one Error Message
  http://forums11.itrc.HP.com/service/forums/QuestionAnswer.do?admit=109447626+1289544255115+28353475&ThreadId=976467
  
  Or you can contact the manufacturer of the printer to help on the installation of the printer by using a different port and check.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows spooler printer 8 error 1068: the dependency service or group could start.

  Just upgraded to Win 8 ENT x 64 Win 7 ENT x 64.

  I thought, maybe I need to restart the service. Go in Services, look to the top of print spooler and select restart.
  But I get an error:

  "Windows failed to start the Service on local computer print spooler.
  Error 1068: The dependency service or group could start.

  "Okay, so I go into properties and see what are the dependencies.
  Attached image:
  

  RPC is running, however, no FAX.
  Go to Fax and just getting started. I get the error 1068
  Focus on dependencies here.
  Attached image:
  

  IM lost at the moment.
  Any help would be greatly appreciated.

  I ran sfc/scannow and found no problem.

  Please notify.

  I found this somewhere else and this fixed my problem

  I had the same problem and I have created a batch file that I have run as Administrator:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

• Printer Spooler error 1068: the dependency service or group could not start

  Original title: the printer spooler error

  With the help of Windows 8

  Cannot connect printer to computer.

  Looked at troubleshooting and tried to manually start the printer spooler. but does not work.
  
  Windows could not start the Service on the local computer printer spooler.
  Error 1068: The dependency service or group could not start
  
  Could someone please suggest ways to address them. Its a HP computer. Unable to connect a printer HP or Epson via USB or Wi - fi.

  Thank you

  With the help of Windows 8

  Cannot connect printer to computer.

  Looked at troubleshooting and tried to manually start the printer spooler. but does not work.
  
  Windows could not start the Service on the local computer printer spooler.
  Error 1068: The dependency service or group could not start

  Could someone please suggest ways to address them. Its a HP computer. Unable to connect a printer HP or Epson via USB or Wi - fi.

  Thank you

  need to update Printer Spooler service...

  Run the following as run as administrator...

  https://www.dropbox.com/s/uf1borer6hgce0z/printerspoolser.bat

  Reset...

• Setup error Application-"the application could not initialize properly (Oxc0000135). Click on OK to terminate the application. »

  Had this feature Sharper Image 5 days weather for Christmas and of course we have over-paid for her-$50 bed bath & beyond.  I'm not as technical as most of you, but I am unable to even get the software to install.  I get an application error installation "the application could not initialize properly (Oxc0000135).  Click on OK to terminate the application. "I got the Version 1.01 in the box (and it does not say is the app forecast 4 days) and am running XP.  Thanks in advance for any help - of course, the is Helpline is to give an ambiguous 'we are closed for the holidays' without parameters for the last seven days... Grrr...

  Sure that the error occurs when you don't have a .NET framework is installed on your system. You can download/install here: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=26

• Error-insert the disc when try to open the flash drive.

  Original title: why connect my USB drive as an external drive.

  When the flash drive is plugged into the USB port, it seems that it will be added as a flash drive, but then the following equipment added window indicates that an external hard drive has been added.  When I go into windows Explorer to open the drive in Explorer mode, it says to insert the disc.

  Hi JimScottATO,

  We will try this.

  First of all, make sure that you are connected under an administrator account on your computer. Then plug in your USB key.

  Click START then right click on my computer , then click MANAGE

  In the new window, click MANAGEMENT OF DISKS

  Find the name of your flash drive and right click.

  Click on the letter of change of road and railways

  And then change the drive letter to something not already taken by another drive on the computer, such as "x" or "v".

• Problems become more problems... DISK BOOT FAILURE, INSERT THE FLOPPY DISK AND PRESS ENTER

  I recently had a question on my toolbar menu and begin to disappear.  While I was trying a number of different ideas through forums, I myself in another problem.  Now my computer boots but windows never start I just get a screen saying: "FAILURE of STARTUP DISK, INSERT the DISK AND press ENTER.  It worries me because my computer never came with a CD-ROM it was all preloaded when I bought.  Can anyone help, thanks

  Home premium Windows Vista, 64-bit operating system

  Hello

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Print Spooler error 1068: the dependency service or group could start. __

  I tried - unsuccessfully - restart the print spooler on a box of XP with SP3.  I read the previous posts for this error and this box refuses to restart the service.

  Is there an easy way to fix this without reverting to a system reset?  Can I run a repair?  If so, it will fix the problem?  I tried to run a restore of the system to a previous date and who could not do anything for me either.

  When you attempt to start the Print Spooler Service, error 1068 means "the dependency service does not exist. the dependency service or group was able to start. »

  Depending on your environment and your type of printer installed, your Print Spooler Service will have other dependent services that must run before the Print Spooler Service starts.  If the dependent services do not work, you will see an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  Some Lexmark printers add their own XP services and start the Print Spooler Service, lists them as dependencies and that is why these Lexmark Services must run before the print service spooler will begin.  It may be listed as the LexBce Server.

  You now or have you ever have all installed Lexmark printers?  If Yes, do you still use Lexmark printers?

  Depending on your printing environment, if you use another type of printer, you can have other Service listed tab in the Print Spooler Service dependencies.

  Use the Applet of Services XP to check the dependencies of print spooler and options.

  Click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet.

  Locate the Print Spooler Service, right-click, choose Properties, and then look at the Dependencies tab.  Services listed there must run before the Print Spooler Service starts.  If they don't, you'll get an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  You should always see the service remote procedure call (RPC) and maybe a few others depending on the type of printer that you have installed (Lexmark printers can add some dependency Services to your configuration of XP).  All dependent services must run before the Print Spooler Service starts.

  Dependent Services may vary according to the type of printer that you have installed.

  The RPC service is also required for many other things to work properly and is usually still running and the autostart value.

  If the RPC Service does not work and does not start automatically, you can have other problems, but start with the easy stuff first.

  Of the Services Applet, find the service remote procedure call (RPC) and if it does not, right-click and start it and set it to automatic.

  Then find and all the other print spooler dependency services listed in the Print Spooler Service Dependencies tab.  They will be lance automatically the next time you reboot your system (if that is your desire), set the startup type for these Services to automatic.

  When everything works as you want, restart and check your Services again to be sure that they start correctly and solve any addition
  questions.

  If the remote procedure call (RPC) service is not listed as a dependency for your Print Spooler Service, you must inform XP that the print spooler service depends on the RPC service.

  Click Start, run, and in the box type (including important space after the "equal" sign):

  dependent on the spooler of sc config = RPCSS

  Click OK to assign the RPC service for the print spooler service, and then make sure that the RPC Service is running and start your Print Spooler Service.

  If you still can not understand it, react with the items that you see the tab of the Print Spooler Service dependencies.

  Don't forget to restart and check that everything works correctly after each adjustment.

  Please note that using the above command will effectively remove all the current (and perhaps old) Print Spooler dependency assigned for the Print Spooler Service and assign it only dependent on the RPC Service.  It would be 'normal '.

  The dependence of CPP Service would be typical of most facilities, or after you have uninstalled all the time some printers (Lexmark), but your printer may have a few other dependencies.  If it still does not respond, we'll fix it!

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Error: Insert the CD into the CD player when trying to burn disc Windows Media Player

  Original title: cannot burn music from WMP.

  Try to burn music from Windows Media Player, does not drive D: burn:

  A cd I burned another computer, read in my drive D: as "CD ROM".  But I got a 'blank' CD - R in drive D: and it has not recognized - msg "INSERT CD into DRIVE D:" only.

  I don't think I have a drive for burning CDs. -correct?

  007Trina

  Hi 007Trina,

  1 you get an error message when trying to burn the disc using Windows Media Player?
  2. what version of Windows Media Player?

  It seems that the CD is not recognized as a recordable device. We recommend you to try the steps mentioned in this article and check the difference:http://support.microsoft.com/kb/316529

  For more troubleshooting, see How to troubleshoot problems that occur when you write data to an optical disc CD-R or CD-RW in Windows XP

  Visit our Microsoft answers feedback Forum and let us know what you think.