HP Color Laserjet: HP Color LaserJet - lines/stripes
Hello
I have a HP color LaserJet and I get a lot of lines and streaks on my printed pages.
I also note toner inside the printer and my printer seems to take cleaning cycles more than before.
Thank you!
I would recommend some of the things
First of all, make sure that your firmware is up-to-date, go to the page software and drivers on HP.com download and install the latest firmware available for the printer.
Then, make sure that the toner collection unit is not complete
Finally, print a cleaning of the control panel of the printer page, normally, you should select the following text in the menu:
- Maintenance of the unit
- Calibration / cleaning
- Cleaning page
You can also view this document as well.
Hope that helps.
Tags: HP Printers
Similar Questions
-
HP Designjet T520 color prints have strips
The plot of a file prn in an Autodesk product: Revit using HP paper, the color of drawing a 1 4 "strips that lighten a dark color. The stripes running lengthwise through the drawing, in parallel with the wide edge of 36 "of a conspiracy of 24 x 36. If the size of the plot is changed, the bands remain 1 1 4 "wide. Spare bands natural color for 1 1/4 ", then a band that clears up the same color, then color. No banding occurs on the black and white prints
It's a problem of correspondence of GIS of paper Type. When a roll of HP Designjet Bright white 24lb paper is used, the type of paper bearing the same name is selected, then the file printed correctly, no strip of color - Revit and Bluebeam.
If the paper type does not match the paper roll in the HP T520, print quality has visible lines. On the touch screen of the printer, press 'Roll', touch "document Type", "More" touch, touch "Bond and covered with paper" or read the HP manual, page 107
-
I dropped my iPhone 5 c now it has different colored vertical lines
I dropped it once and the screen cracked, then I dropped it a second time now, the screen is different colored vertical lines this will be under "other repairs" or "screen fix" Please help asap thank you! I can touch the screen and open something, but I don't see it because the view is of different colors. I can hear the audio too... I want to know what repair is because the price is important... Help, please! I tried the hard reset. 5 c 16 gb iPhone
You can consider to Apple and buy one off replacement for this guarantee as long as you have not yet opened.
-
Colored vertical lines receivers when you try to scan with the printer a HP Officejet 6500.
original title: reception of the vertical lines of color when you try to print using HP Officejet 6500 a printer.
I have a HP Officejet 6500 a and the scanner is not working properly, I get only color vertical lines, what happens, how do I fix this please?
Hello
What operating system is installed on the computer?
Follow the steps in the following links, and check, if that helps.
-
Multi-colored vertical lines on the screen until you restart
I get multi-colored vertical lines on my screen and lose control of the mouse. Power off and restart eliminate the problem. Y at - it a permanent cure?
Question seems closed. Lines no longer appear after you download a driver from the manufacturer of the monitor.
-
I'm using the latest version of windows with a brand new computer. I am trying to edit a graph model and I tried several that appear with colored vertical lines that won't disappear.
It is the space reserved for the missing images. Look in your project for lack of sequence window and link. Files will probably be at the location where you downloaded the model.
-
Background color of line AdvancedDataGrid
I hope someone can help, I want to highlight an entire line or lines that match a value. I assumed the stylefunction get me but I have not found the style referring to the background color of line.
Any help please.
Thank you
The solution I found was to extend the DataGrid class, add the override in the background of the drawing and add a rowcolorfunction. When using converters of point, you must use the function with the alternatingItemColors style so the rendering engine Gets the color correct and not opaque.Thanks to research saisri2k2.
-
Color of line numbers Flash CS5?
is it possible to change the color of line numbers in the Actions Panel / .as file on Mac OS X?
I see the version Windows from Flash CS5 has this ability, or it's colored blue/cyan by default (see screenshot) while the Mac version is gray.
In the ActionScript of Flash Professional Editor, you cannot change the color of the user interface, such as the vertical bar where line numbers are included. For Windows computers, it's cyan when it is active, or grey, when an another Panel/window is active.
The only changes of color, you can assign are in the preferences > ActionScript Panel (in the foreground, which is the main color black text, background, keywords, comments, identifiers and strings).
I use FlashDevelop, a 3rd party LIKE (and other codes) editor-in-Chief. Even with that, I don't think that the user interface can be changed.
-
Need color alternative lines of an OAAdvancedTable Bean in OFA
Hello
I have a table adv. Bean & when the page is displayed, I need to display the alternative lines in a different color. In my VO, I added an attribute additional 'color', which even have values like "OraPageStampText" for all the odd records and "OraErrorNameText" for all records. Until now its ok. I got stuck when I try to implement the logic of OADataBoundValueViewObject in my ProcessRequest() method.
I looked into some old discussions and got the below mentioned thread. There they suggested to use the bean line, but I'm afraid there is no such bean in the context of return a line like what we have for a column (OAColumnBean).
I had asked the same thing in this thread . But it get all the answers, so post a new.
Pls know me if I'm missing something.
Thank youHello
You create the bean of all fields in the advanced table and using the bean setAttributeValue API.
See the code below,
OAMessageStyledTextBean comCode = (OAMessageStyledTextBean) webBean.findChildRecursive ("CompanyCode");
Css1 OADataBoundValueViewObject = new OADataBoundValueViewObject (comCode "FontColor");
comCode.setAttributeValue (oracle.cabo.ui.UIConstants.STYLE_CLASS_ATTR, css1);In the above example, CompanyCode is one of the advanced table column. FontColor is the attribute to display like what you have created. You need to repeat the same steps for all the fields of the table of the advance.
Hope it will work for you.
Thank you best regards &,.
REDA Papdeja -
Color laserjet 4500 stripes CMYK
Hello, last week, I have an old printer to my friend HP color laserjet 4500 (older printer...).
He works "very well", but on each page, there are two bands CMYK. There is always in a different position on the page, but at the same distance from the other band. I ve already many printed pages, and these bands are always distinct as the first impression... Configuration pages (where you can see those stripes) and a close-up (page 3) is attached. Is there anyone who knows what could be the problem? Thank you!It sounds like a problem with the main drum, unit is 6 inches in diameter and thus you can get 2 copies of the default on a page, the colors are separated as the unit performs a full rotation between each color due to the gear and the displacement of carousel, so that you get each color in turn one after the other.
As it is the width of the image, it may be the cleaning squeegee or similar within the drum unit, it might be useful checkign the lift remaining where it is close to replacement anyway.
Each cartridge replacement will not solve this problem, as the belt is not a cause that on this model, the color of the scene are stacked exactly on top of the other, the image is formed on the surface of the belt, the element that takes the ink in the cartridges, and transfers it to the belt is the drum unit and it will expose this issue if defective.
You should be able to confirm able from the beginning of one single fault at the beginning of another, this should be 6 inches (152 mm) - you should see also the spacing between each color of 6 mm the image below shows a typical default if the drum has a brand, the image will show spacing of 6 mm between the colors, the spacing between the beginning of the black point and the beginning of the next black dot will be 6 inches.
-
LaserJet pro 400 color: Blue lines on the right side of the page when printing in color
When printing in color I get this blue line that occurs on the right side of the page. It is darkest near the edge and shoot low towards the printed part of the document. It is a vertical line that follows the entire length of the page. I printed a report of quality and it is always present. In my view, this indicates that it is a hardware issue, rather than software. Is there some rolls or the part that needs to be cleaned? Can you provide a link to the instructions?
Thank you!
Replace the cyan toner cartridge.
-
Text 3D - Gradients are rasterized and causes the color of the strips
Hi all
I applied a 3D > extrude and bevel on my text. Now the problem is that when do my border (part that is extruded) causes a color, stripes, being given that it pixelated
the gradients. See my picture below.
How should I take away these bad lines?
Thank you
Gradients are still pixelated when using the 3D effect:
But what you show in your image isn't really pixelation.
Fill the shape with a flat color and let the 3D lighting alter the values. Otherwise, apply the effect 3D with 'no shadow' then object > decompose the appearance and apply your gradients later.
Illustrator 3D is not "top-of-the-line" and often requires exapanding and refining after the use of the effect.
-
Color bar line at startup, and then black screen, then startup is very well
macOS Sierra - macOS 10.12 Beta (16A294a)
MacBook Pro (15 inch, early 2011)
2.2 GHz MacBook Pro (MC723LL/A)
Intel Core i7
Intel HD Graphics 3000 - 512 MB and AMD Radeon HD 6750 M (1024 MB) with automatic switching
Processor: 2.2GHz
16GB 1333 MHz DDR3 memory
Boot disk: 1 TB - Samsung 850 SSD
Graphics - graphics Intel HD 3000 512 MB & AMD Radeon HD 6750 M - 1024 MB
Here is the situation - when I initially push the power button - the display lights up, come up apple logo, bar starts to fill in through the screen start and the point 1/2 way, I get a strange color line (Fig 1).
Then the screen goes black for a second or 2 (photo 2).
Then start bar turns and ends. (photo 3)
Then I can connect. (photo 4).
Other that the newspaper in question, it doesn't seem to be any other question. Systems has passed Diagnostics. I have reset NVRAM & MSC.
Anyone know what is happening?
Any help is appreciated. I bought the MBP, used from a seller on Amazon.
Thank you.
I had this problem too, but it resolved now on the Apple store. They had seen previously on older hardware which has been updated for Sierra with FireVault market and occurs when the operating system is switching graphics modes. I got just my logic board replaced so wanted it is solved.
We have attempted to extinguish FireVault, but the question was still there. Then they have successfully installed a new copy of a Mavericks and the problem was gone. Then they installed a new copy of Sierra and the question is still missing. Now, I have re-enabled FireVault and the issue has gone.
-
Satellite P30-110: colored screen lines
Hello
I have a big problem with my laptop. There are thin lines, thickness, colors on my screen and some of them disappears when I turn it on. My warranty expired about 7 months ago and I was wondering if I still have the right to extend my warranty for this laptop? Once it is extended, if no repair is required they will do it again for free?
Thank you for your help
Hello
I put t think that your can save the laptop for the extended warranty.
In my view, the standard warranty must be valid if you want to extend the warranty.
But I think that the service point in your country can give you more details about the warranty policy.But the lines also appear on the external monitor?
-
There are some colored lines on my Macbook Air camera when I take a picture. This happens with any program that uses the camera Photo Booth and Skype. I restarted the laptop several times. Does anyone know what I can do about it? I need to replace the camera? The operating system is OS X El Capitan 10.11.
mauialli wrote:... Does anyone know what I can do about it? ...
Contact Apple or one of the Apple-Authorized Service Provider to have your Mac professionally repaired.
Don't forget to back up your Mac and Deauthorize iTunes before the call for tenders for the service.
Post edited by: Jim EZ
Maybe you are looking for
-
I have two questions. In the past months, some sites there are ads or facebook/twitter links that scroll and remain on the same page that I scroll down. I find distracting moving images and want to stop them. How? I saw another development that I get
-
Hello I have a Pavilion DV6-2010sa here that flashes twice to indicate a failure of BIOS. I have already had this problem before with the same model of laptop and not got anywhere with it. A forum says that you must use a program to format a USB stic
-
MgUpdateSupport.dll missing at startup
my computer has problems early and closing told me miss me MgUpdateSupport.dll, how to fix this?
-
DVD player and a cd player stopped to recognize CD
About 1 week ago I did a 'disk cleanup', but now it seems that none of my optical compact disks will work. The DVD player will play music CDs and video but all my data, including the original program to XP CD, are presented as having zero byte. The p
-
Unable to connect to the selected mobile data Simulator service
First of all, let me say that I am a newbie with BlackBerry and simulators. I just downloaded 9630_Verizon and 9630_Sprint simulators as well as the MDS Simulator package. I start the MDS Simulator and the DOS window opens and seems to work very well