HP LaserJet 6Lxi: Laserjet vs. inkjet

Similar Questions

• Photosmart 7520: Limited Font Styles, prints gibberish to many fonts to Word

  The photosmart 7520 interpret only a few font styles.  Another everthing prints garbage: weird symbols, Arabic.  Included fonts styles can be extended?

  >... is there a way to solve problems and identify the problem?  I'm on wireless communication ...

  My expertise is with printer LaserJet, not inkjet devices;  and I know very little about the problems and wireless protocols.

  So I don't thtink I can provide much useful advice about it, sorry.

  > if I have send the document to the printer, it prints perfectly...

  I guess by that you are referring to the HP ePrint mechanism.

  Still, I'm not familiar with this, but if I understand correctly:

  • You send a document (only certain types are supported) to the e-mail address provided at hpeprint.com
  • Location Server turns your document to an equivalent printer format (i.e. effectively runs through a driver printer residing on this server).
  • Then the printer ready job is sent (not sure of the mechanism) of your device, via your internet router.

  So this may use a different driver on your premises and may also use a different route in your printer.

• iPrint with jet offie 2605 possible?

  I have 2605 work on my network. Wireless and wired. I just got an ipad and I was wondering if it is possible to use iprint to print from it

  In fact, you have a LaserJet 2605?  I can find no reference to an OfficeJet 2605.

  If so, iPrint does not work with the LaserJet only inkjet (DeskJet, OfficeJet and PhotoSmart).

• Add networked LaserJet Pro 200 to ePrint

  I can't add my new Color LaserJet Pro 200 M251nw networked to ePrint.  When I try to follow the iPad on the orientation of the screen, after entering the printers IP address he wants then connect to Enterprise ePrint.  I don't have it.

  My older inkjet has been on ePrint, no problem.  Help, please.

  Hello
  You try to use the HP ePrint Mobile's application or e-mail ePrint service?
  
  If you try to start with the email ePrint service, take a look to the following document:
  http://h30434.www3.HP.com/T5/user/viewprofilepage/user-ID/2585903
  
  If you try to use the HP ePrint on your iPad app, I would recommend a look at the following document:
  http://support.HP.com/us-en/document/c01616126

• LaserJet Pro 200 m251nw: Laser Jet Pro 200 color ink bleed on black and white page after some use

  I print mostly black and white documents. I recently had 2 ink color of defamation in the pages that are supposed to be just in black and white printed. The first was the magenta, and it might discolor the entire page. The second was yellow, and it could fade just the left and right margins. It was two cartridges to Cartridge World, and they have done very well for some time after the installation or always had plenty of ink left when this problem occurred. The manager at Cartridge World has estimated that perhaps the part of the waste of the cartridge has been complete over time and flees to the ink. He said that for most black and white print still causes the drum on the cartridges of color to turn and empty the little ink in waste room. His suggestion was to get a second monochrome printer for most usage of my impression and just this HP product when the color is required. Who is? Other suggestions? If I replace the suspicious cartridges, print returns to normal, at least for a while.

  Hi @la1959,

  Welcome to the HP Forums!

  I see that your HP LaserJet Pro 200 M251nw, color of ink smear on black and white page after some use. I'm happy to help with this problem!

  According to the website of Cartridge World, http://www.cartridgeworld.com, it seems to me that these cartridges are rebuilt (refills). And, the information in this guide, can I refill the ink in my HP ink cartridge? States:

  Yes, you can. But what do you want? QualityLogic, one of the organizations of quality foremost in the world, has tested the performance of HP refurbished vs brand inkjet print cartridges (filled). Results: original HP inkjet cartridges ink far surpassed refills in print quality and reliability of printing.

• MFP HP Laserjet color 200: Scanner not found Error Message on my computer

  5 years ago I had a HP inkjet printer and after that it has been installed, I never got the scanner to work. I always had an error message (do not remember the wording). Last month, I had a new HP laserjet printer with a scanner and it is installed, but still once, I get an error message when it comes to scanning. This message says that there is no scanner found on my computer.

  Today, in the control panel of the printer, I could open the analysis option. It seems that the only options are to send the scan of an email or having the scan sent to a flashdrive (USB port). So, if I want to scan a photo, how do I just scan the image and save it to my documents? Why is the only option to send it in an email or a flash drive, or a network folder? If I try to access the scanner to my computer (instead of using the Panel on the front of the printer), it looks not to the scanner is connected to the computer, even if it is (I went into System Preferences and found the printer and the printer and scanner are connected with this new printer).

  So, my question is double; why I get this message saying my scanner is not on my computer and is the only way to use the scanner is to him have connected to the internet or to a USB port, and if so, how do I connect it to my e-mail address or the network? I guess I have to send the scanned image to myself if I want it on my computer or save it on a USB? Thanks for any help.

  Thanks for providing this information astonished .

  Try the following steps to see if you can scan in the HP scanning software or window printing and scanning. How Scan: Mac OS X v10.6.

  Please let me know the results.

  Thank you.

• Cannot install HP LaserJet printer

  Original title - installation of the program

  The only program that I tried to install so far is the range of HP LaserJet printers. I did what the instructions but nothing helped, PLEASE help

  Hello

  Try asking your question in the Support Forum of HP printer.

  They will give you all the assistance you need.

  http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet

  See you soon.

• HP LaserJet MFP M521dn Pro: Fax, e-mail, and fax check-in on Mac or network drive

  Hello

  I think about buying from this all-in-one to a network of Mac computers. I need the ability to archive faxes to the computer or a network drive, or by fax to e-mail. Is it possible with this printer.  If not, are there any alternatives

  Thank you

  Tim

  Hi Tim,.

  The HP Laserjet Pro M251dn not offer not any digital fax, archiving capabilities, or e-mail or a network folder.

  You can find the data sheet of the printer below, as you can see in the 'Fax smart software features' section, and it does not offer any digital fax receive capability:

  Journal of h20195.www2.HP.com/v2/GetDocument.aspx?docname=4AA4-5713EEE&DOCTYPE=Data & doclang = en_US & searchquery = & cc = uk & lc = en

  Within the B & W Laserjet Pro products multifunctional none of the printer offering such digital fax, archive of features, such is offered more wireles on Officejet Pro or Officejet Pro X series inkjet printers.

  It may be useful to know where you come from as the models avaiilability varies among different countries.

  Shlomi

• LaserJet MFP M477fdw Pro: LaserJet Pro M477fdw MFP - cannot sweep off-grid PC

  Oh please can anyone help? Spent 3 hours on the phone today, a refund 2 with tech, the rest of the post sales and pre-sales who was supposed to be calling me back with a list of printers that can do what I need, but all first does not, so I called again and she promised that she would appeal before s/n and still did not! Massively unproductive day. OK rant over.

  So I bought the above and it does everything I need IF I want to rise to the printer and scanner as a pdf for printing. My old 8600 OfficeJetPro I stood there, chosen analysis, it would be as if scanning to PC / Email. / USB / Fax etc. I would say PC and scanned and sent to my PC folder on dropbox and open the pdf file automatically.

  The LaserJet printer seems no analysis like that, unless it is connected to a network folder, which tech was able to put in place. He wants only to use Windows fax and scan, which is a JPEG - no good for me.

  It may not really be so complicated and I'm sure it's possible. I tried uninstalling etc and all the drivers on the HP site but nothing worked.

  Can someone help me?

  Glenda

  Hi Glenda,

  HP Laserjet printers don't offer direct scanning to a computer like HP inkjet supply, scan to a computer can only be done by HP itself scanning software and not by the front panel of the printer.

  You can find the manual to the user below, any method of scan supported is listed (see Scan page v):

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c04636804-2.PDF

  You can go the HP from your PC only software from the Control Panel before you can only scan to a USB Flash drive, a shared network folder, a mail server, two emails or folder scan network are available for network connected device.

  Kind regards

  Shlomi

• HP laserjet 500 color edge to edge M551 / no bleeding / no margin / without borders

  I have a HP laserjet 500 color m551 but I can't figure out if I can print borderless or not.

  I found a setting in the called edge to edge printer which is turned off by default. I allowed him, but yet all of the prints have borders.

  I can't seem to find settings in print drivers (CLJ_M551_sw_win_driver - installer_13284.exe) where I can check without borders or edge to edge or something like that.

  I am running windows enterprise 10 and downloaded the latest PCL6 driver 21 November.

  any help would be appreciated.

  The real reason for the design is the fuser unit.  Since the paper width is 8.5 inches, there must be 'play' on each side of the fuser unit and toner to reach the edges of each leaf would contaminate the edges of the path of the fuser unit and the wire time cause jams or other image quality problems.  However if the user had to buy a large format color printer laser that handles paper up to 12 x 18, bleed will be possible on paper up to 11 x 17.  Letter-size paper will allow bleed because it feeds using the side of 11 inches from the leading edge.  Also inkjet printers will bleed because unlike toner for LaserJet inkjet printers use a liquid ink which dries and does not heat to join the book.  Some inkjet printers use heat to dry the ink faster, but it of a different technology and won't cause problems with bleed.

• LaserJet 2420d: open the HP Laserjet transparent film

  I have a HP Laserjet 2420d printer that I want to print several slides. I've only been able to find suppliers who sell the film in boxes of 50 +.  Although this may be one inappropriate question, other films not HP manufacturers/suppliers are working OK with my printer without doing damage?

  Thanks in advance for any response

  Hello

  You can use transparencies of any brand, however do not forget to use transparencies which listed as compatible for a Laser printer.

  Using a transparency designed for inkjet printer can cause the media do melt and damage the printer... all transparent will include its compatibility for Laser or inkjet on its packaging.

  Check the packaging, the transparencies must be able to withstand 200 ° C, which is the temperature of fusion of the printer.

  Also remember to use Tray1 and change the configuration of the driver accordingly.

  Shlomi

• HP LaserJet 200 color M251nw: delete the print job?

  This should be very simple, but my grandma brain can't seem to find where to delete a print job from the printer.  Someone at - it help him?

  HP LaserJet 200 color M251nw with Mac OS X 10.10 Yosemite

  Thank you!

  Cindy S.

  There is nothing like you have had on the inkjet.  LaserJet is very fast that so generally they do not need store work as they are printed as they are sent and receive jobs one at a time and sometimes hold jobs in memory according to the size and the number of jobs received at the same time.  Only way to cancel is to hit labour to cancel it or the 'X' button depending on the model.  Storage of the work is available on some LaserJet of top-level with HDD storage, control and retrievel of jobs, but most of the time with the LaserJet you do not have this option.  Printers large format HP also have the possibility to store jobs (location and nesting), change the print order, etc., but again, what are printers with hard and special drivers built into the software to handle these tasks.

• m276nw: have a Color LaserJet printer use / print on Photo paper?

  Hello HP support.

  Although you notice that I have a few questions, since the store representative say yes to everything and barely even know the answer.

  My Question is I have a lot I mean a lot almost 1,000 sheets of paper Photo HP since a few year and decade back wasa good sale and just discovered recently hidden in my HP demo day I presented.

  * Anyway would like to know if I can use this paper HP Photo in my m276nw?

  Also HP Color LaserJet printer normally manage and work with HP Media products so if I buy another printer in which I am looking around for another AIO hope to do everything.

  I have Premium, matte, bright & Brochure paper Glossy Photo - HP makes a lot of types of Photo paper I could use them?  Since then, he does not say Laser or inkjet on the box.

  Sure I'll reach out incase I have an another question

  Thank you

  www.iOSGenius.com

  Hello

  It supports papers photo as indicated:

  http://support.HP.com/au-en/document/c03315988

  But given that the documents are old, the quality can not very well. HP produces special photo paper for Laser printers.

  Kind regards.

• "Unable to connect to the computer printer" message appears during installation of laserjet p1102w.

  During the installation of the wireless software for Laserjet P1102W on computer with XP Professional (pk2), the message ' printer was able to connect to the wireless network.  However, this computer is unable to connect to the printer. "I checked the printer and the computer both connected to the same network named with even WEP key, opening, credentials etc.  I have a linksys connected to the computer and the modem cable. When I connect using the USB connect wire to the computer directly, I can print.   Two software, wired and wireless, have been loaded.  My HP inkjet printer is wired to the linksys and works for multiple computers to the wireless network. Do I need to have another printer? I thought that I could still have a truly printer wireless!  I'm a novice at this.  Thanks for any help you can give.

  I called HP support.  The technology was very knowledgeable and accommodating.  HP Smart Install program (in the printer and on CD) that came in the box was an old version.  I had to reset the printer back to factory default and to download the new firmware on the HP.com website.

  The oldest had an incorrect address router (network). You can see the address of the router (IP) when you perform the self-test (hold down the button "on") under the information network.  IPv4 address must be the same as your router.  Now my printer and computer are looking at the same network.

  Works great!  Love this LaserJet.  Faster than my last HP LaserJet 4 L.

• Istalling failure when the plant is 99% (Laserjet Pro cm1415 cold)

  This is the 5th time I try to install the program for my new cold Laser Jet Pro cm 1415 and installation reaches 99% it stucks where for avout 3-4 minutes and then I get the following message is displayed:

  "An installation operation took too long to run. It is a use of the fatal errorpreventing product. Restart your computer and run Setup again. "If the problem persits, please check the product site web fo your product."

  I even downloaded the installer from the web site, in case that the disc was defective, but still the same message.

  Any ideas? Anyone?
  Thank you in advance.

  There is no scrubber for this Laserjet Printer as there is for some printers inkjet and Laserjet printers. This means that you must to clean manually. Uninstall everything that deals with the printer's software. Once you did, go through the files on your hard drive and get rid of those dealing with the printer. Finally, use a record cleaning tool to clean any registry key that may be stored in the registry. Once you have all that done, try to reinstall it. Let me know what happens.