HP envy 15t: HP envy 15t laptop does not turn even after going through all the recovery solutions, I've seen online.

Similar Questions

• Pavilion 15, G8D9OPA #ACJ: my laptop does not turn on after pressing the power button

  HII, after a week that I have on my computer hp laptop 11 months but its not get. I even removed the battery and tried to get by pluging the adapter, but it doesn't work. What I would do. Please help me.

  Hi @Swati_20,

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the HP Guide's Forums:

  Learn how to post and much more.

  I understand that your Pavilion laptop not turn on.

  When I did a search with the product number, you provided I have no results.  Would you be kind enough to verify this information.

  How can I find my model number or product number?

  What operating system do you use?

  When you connect it to the power light on the power supply?

  Here is a link to the HP laptops - tests and using the AC adapter that can help.

  You can also try a hard reset.   HP - notebook computers use the hard reset to solve software and hardware problems

  Please keep me updated.

  Good luck!

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to resolve your problem as " ""Accept as Solution"" " to help other members of the community!

  To show the appreciation for my efforts, please click the 'Thumbs UP' icon' below.

• My dell studio 1555 laptop does not turn on

  Hello

  Does not turn my dell studio 1555 laptop computer. I tried all the troubleshooting option provided in the dell forums.

  Here are the steps:

  • Disconnected all external devices on the computer, including the battery and the AC adapter / CC.
  • Press and hold the power button for 20 seconds.
  • Reconnected the battery and the adapter.

  After checking all the options of this still my laptop does not turn. I am not able by any beeps as well.

  I even checked the video output connect my laptop with an HDMI cable on other devices (TV). The screen is blank.

  Kindly let me know what we can do more.

  PS: I have no warranty for my laptop.

  Thank you

  Kirti.

  Check that the LED on the adapter lights before plugging the end of the book.  If this is not the case, replace the card.

  Try without the battery - if it will then light up, the battery is bad.

  Unplug, remove the battery, press power for 30 seconds and remove and reinstall the bars of memory.  Try again.

  If it lights with a good map and without the battery, replace the motherboard.

• K010 ENVY: my laptop will not turn off

  Hello

  When I shutdown/hibernate/standby/resume my laptop, it will die completely.

  All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

  And when I try to Hibernate, everything is ok, but I have the same problem.

  Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

  After manual turn off, when I turn it on again, everything works correctly:

  -If hibernation: OS will continue to last situation.

  -If start/stop: OS works normally without error or warning.

  After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

  Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

  Is there a parameter/software to check and fix my problem?

  Thank you

  Hello

  You are welcome

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• Satellite A300D - 14 P: laptop does not turn on

  The sleep of the command was made for windows. After that the PC won't turn on at all. After his button starts to light, drive HARD and CDROM by pushing the power button, turn, but the screen remains black, the CPU fan turns after a few minutes, BIOS and operating system do not start the process. After pressing the power again, the PC is turn off immediately. Formed the impression that the computer is still asleep.
  Can you suggest what kind of problem, this could be?

  P.S. In the forum, I find this suggestion:
  ' 1. unplug the laptop.
  2. remove the battery
  3. hold the power button for 20 seconds (do this drains any excess power fron the unit)
  4. put battery back in
  5. plug in laptop
  6. try to market"

  I try but the computer still does not work :(

  Hello

  I found another workaround solution;
  Remove the AC adapter and battery
  Leave the laptop disconnected for long periods. I guess you should wait a few hours.
  Then reconnect the battery and ac adapter.
  Then try to turn on the device

  Find out!

• Laptop HP - 15z touchscreen in option: laptop does not turn on

  I recently bought this laptop computer right about a month ago, and just recently it started acting for no reason. When I press the power button, an orange light comes on, screen lights up without images, and there is a noise; but the laptop does not light. I can hold the button, but ultimately the screen just goes back to black, the noise stops, amd, as the light goes off. How can I fix my laptop and make it work properly again?

  Hello

  Thanks for posting in the HP Support forum. Welcome aboard!

  I'm sorry for the problems you're having with your HP computer.

  Please, check these items official 2 HP on these issues, that you experience now. Follow the appropriate steps that correspond to your case to try to resolve the problem:

  > > http://support.hp.com/bg-en/document/c03518165

  > > http://support.hp.com/us-en/document/c03515402

  If you've tried everything but nothing works, I fear that you will need to bring your computer (or ship it) service - repair center authorized HP. If the computer is still under warranty, you must first notify HP support. If you don't know where such a Center, please contact HP support for help to find a. Here's more information:

  > > http://support.hp.com/us-en/document/c00372730

  > > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

• HP Pavilion6700: laptop does not turn on

  When I push the power button the lites blue blink for 2 seconds and that's it. the laptop does not light. There the home edition of windows vista. Sorry that I don't have the laptop with me, I can't provide you with all the numbers. hold the power button for 10 seconds, the only thing that happened was her lites blue flashed. If it is a power problem is it easy to fix? Thanks for help.

  Given that you listed a DV6700 will tell you some bad news these laptops have feared dead video chipset and it looks like yours has finally reached that point in its lifetime. You choice must have converted video chipset or get a replacement with the video chipset dead fixed Association to recover your system up and running again.

• HP dv6t 3100 laptop does not turn on (but the light)

  Hello...

  My laptop battery 3100 dv6t has is not good enough. It doen't take the load. Power goes off when the laptop on. Suddenlty it will turn off and now I can not turn on. But the charging light turns red for about 1 minute and it turns white after that. But the laptop does not light. What should I do? Help, please.

  Thank you!

  Hello kelum17,

  Welcome to the HP Forums! I hope you enjoy your experience!

  I understand that your computer will not start correctly. I will do my best to help you with this problem! For help, try the procedure described in this document from HP: computer does not start

  This document contains the steps such as resetting the laptop and more, corresponding to the exact symptoms. I believe that this document will solve the problem. If this isn't the case, I would contact HP support by phone using equipment. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide
  
  Please let me know if you have any questions or concerns. Thank you for bringing This problem on the HP Forums. Have a great day!
  
  Mario

• HP Pavilion 15 p150nh: laptop does not turn off completely

  Hello!

  I have a laptop HP Pavilion p150nh 15. It does not turn off. If I want to close it will turn off completely. I have black screen but the vens are still on and the buttons start led is also single beds. I've tried everything. Updates, hard reset I was looking for BIOS but nothing.
  Help me please!

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• V3 - 571G problem cable, laptop does not turn on

  Hey everybody,

  A few months ago, as the battery, the loading of the laptop has stopped, and the laptop was not any more recognized battery icon (like the battery is not connected) so I had to use the laptop plugged in all the time but not biggie.

  But last week the laptop does not work at all. Even plugged in, there are no more than 5 seconds. I opened it and noticed a problem on the cable connecting the charger to the motherboard. On the cable is cut (the black one).

  I took a few pictures on the cable said:http://imgur.com/a/9n2F7

  Is - this cable easily repleacable?

  The last 2 pictures are on a piece, I am just curious to know. What is this piece?

  Thank you!

  Hello

  Here is the part showed up on one of your photos:

• My laptop does not turn on and does not go to the Welcome screen.

  My computer says its update and there's just the TI shuts off and it resets again.

  Try the following steps:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve it:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite L30-101 does not turn ON after Vista update

  OK well my laptop has played lately and I have installed the new update of Windows Vista.
  Now my laptop didn't boot.
  It just won't turn on. I tried everything and its not working everything simply do not.

  Whats gone wrong turned with her and is anyway I can fix it?

  Hello

  Do you mean the laptop does not illuminate or only the Vista operating system does not start?

  You see the home screen Toshiba appearing at the beginning?

  Feedback would be appreciated

• HP Pavilion: Disk drive does not work even after I have installed and uninstalled

  Hello

  The disk drive on my laptop does not work. It does not recognize the CD or DVD. I tried to go into the currency manager and uninstall the drive and scan the image but it does not work.

  This error appears when I look at the properties of disk drives:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).

  I don't know what else to do.

  Thank you.

  Hello

  Try the rest of the procedure to the title of the subheading resolution - method 3: manually difficulty corrupt registry entries on the link below to remove upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• Mouse randomly turns into a bigger sign and does not act as a cursor to all the

  original title: the behavior of the cursor

  Sometimes, and often, my cursor turns into a huge sign and does not act as a cursor at all; Let me not select, click or anything like that.  Acts as a tool "edit page."  I can't understand why or how it turns into that.

  In the mouse settings, make sure that ClickLock is unchecked.  This feature, if enabled, will cause the cursor being stuck in the corresponding mode.

• Envy 17: laptop does not start

  Yesterday, I downloaded the update for Adope Flash fixed zero-day, and in a few hours, my laptop crashed and does not start. Yes, maybe it is not something, but it's the only addition I made for a laptop works perfectly.

  Software HP tries to fix the problem without success. Or go back to a system restore point. An entry stops the process. I have a repair for Windows 7, 64 bit disc, but when the system crashed there is a CD in the drive and having no control, can't do this, unless you can give me the steps to try it.

  The other shows, alternatives HP is a supposedly reduced image recovery affecting the OS, drivers and the software selected. This means that my programs and data remain intact in this process.

  The last alternative offered is to restore the State of the plant.  Any suggestions are appreciated

  @qpen ,

  Hello again.  You have to do is remove the CD-ROM drive in your system, it's usually a screw that holds it in.

  With regard to the recovery he will wipe away your own system so you need to do is to take it to someone to back up your files by removing the hard drive and put it in an external hard drive enclosure.

  I hope that it is of little help.

  Thanks again for posting and have a great day.