HP Laserjet P1005 and HP Photosmart 5520

Similar Questions

• LaserJet P1005 and Windows 7

  I have just download and install the latest drivers for Windows 7 64 bit from HP for my Laserjet P1005 website.  However I can't get the printer to work.  I tried the basic so the star driver.

  With the automatic configuration, I go to the step where it says connect my printer (the fundamental and comprehensive driver), but I never get an option to conitnue.  When I connect / turn on the printer, I see the device in the control panel Windows 7 as an unknown device, but the installation wizard n no change to give me the next button.  So I can't do anything.

  When I try to install manually, I can successfully install the Windows printer c can be seen, but when I go to print, the first time, the light flashes right on the printer and after that, the printer does nothing.  If I remove the task from the queue, when I go to print again, the work just stay in the queue and printer normal lighting.

  Any1 have any ideas or are there problems with the drivers.

  Thank you

  Daniel.

  SOLUTION!

  Hello

  I think I found the solution.

  I downloaded the latest driver on the HP site. I run the Setup, and as the instaler asked me to plug the printer I did. Of course, nothing happened.

  I left the open Installer and downloaded this tool:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-59850-1&LC=en&DLC=en&cc=us&lang=en&OS=1060&product=3435668

  I run the tool, and still nothing.

  Then, I opened the Device Manager and discovered the printer kisted under "unknown device". I cliocked on her right and updated the driver, I selected to check the drivers online as well.

  The driver is installed in seconds and the installer HP always open recognized the printer, making me now to install the extended functionality.

  I have a Bud pretty testpage my hand. All of this has worked. I don't think that the plugandplay recovery tool was essential to make it work. But I posted it in all cases.

  Hope that helps.

• HP Laserjet P1005 and Windows 7

  Hello

  I tried to install the drivers for the printer Laserjet P1005 on my Windows 7 PC, but he does not want to install the drivers. This printer is totally incompatible with Windows 7? If so, HP will fix this compatibility issue?

  Thank you very much

  Hello

  Have you tried installing the software by downloading the software complete solution on the web? OR that of built in drivers. Here is the link for the drivers of the complete solution

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=4062&LC=en&DLC=en&cc=us&product=3435676&lang=en

  The link above also has an option to download plug-and-play drivers based on the host. I suggest try this too if the solution does not work. BTW, you see an error during installation?

  Thank you

  Naveen K

  HP Support Engineering Center

  Click on the yellow button of KUDOS to say thank you

  (Although employed by HP, I'm trying to solve problems with my will and my employer bears no responsibility for my answers)

• HP Laserjet P1005 and 64-bit Windows 8...

  Oh boy,.

  any idea on when the pilot comes out?  At this current Hewlett Packard is FORCING me to stay with windows 7 when I'd rather be with windows 8.  I offered to beta-test of the driver, nothing helps.  Heck, I have windows 8 dual boot with windows 7.  There will be nothing to switch back.

  I know im not the only one who is a little irritated to the point that a driver is not yet available.  Ive checked the site several times a week to discover the same old same old problem.  According to them, that the work around will not work either.  So where it leaves its customers.  IM one of the lucky ones who have started to double.  But the person who already has this printer and goes and buys a new computer with windows 8.  they have a Clipboard.  It seems to me that it keeps rushed to come.  February, then March, then April, spring now.

  I have to go and buy a new printer or not?  Let us your customers linger no more.  Not a happy camper.  But I will say this.  I bought printers for over 20 years.  I've never owned a lexmark printer.  The rest have been HP.  Now a Samsung or a cannon like attractive mighy.

  PLEASE provide the driver soon.

  Thank you

  WrecklessNL

  I apologize for the inconvenience, but unfortunately it is not a way to speed up the release of these drivers. These drivers are developing not only HP, but they are developed in collaboration with Microsoft. There are also a number of factors that contribute to the order in which the drivers are available in which are mainly determined by the relative age of the printer and approximate users who are affected by the present. The drivers are prioritized by the impact they will have among our many users.

  I hope this information is useful for you!

• HP LaserJet P1005: LaserJet P1005 does not not with Win10

  Hello

  I upgraded to win 10 (from Win 7), after which my LaserJet P1005 continued to work, but not for all software. So I decided to search the drivers updated and found your support site with the basic package Driver for this printer.

  I tried to install, but installation is stuck at first without an error message. That's when the trouble started, because now my printer not working not at all, and no pilot at all move no more.

  A list of what I've tried so far is below.

  Please help with new suggestions!

  -Deleted all the facilities at HP, printer removed from Windows, all cleaned up registry, power off devices and rebooted the system. Then tried to install the base driver pack, but it got stuck again (after 10%).

  -Authorized to everything again, as above and I tried to install the older driver full pack which worked partially after Win10 update. Installation got stuck. No action of the printer.

  -At this point the printer is even not detected by Windows as a new USB device.

  -Restored Win10 to the point just after the upgrade. The printer appears in Windows devices again, but it's offline and it stays that way, everything that I try (followed all the steps on your support site)

  -Tried several different USB ports. The printer works fine with laptop Win7, so the cable, the printer and the power are very good.

  -Then, I tried to run all the HP diagnostic tools (print and scan the doctor etc) but they tell me that this printer is not supported. In a desperate try, I installed the basic driver pack again and this time he DID install completely. However... She is still offline, and it stays that way.

  -J' have an error (yellow triangle) in Windows device, where it is said: Quest Software USB key cannot start because configuration files or registry damaged. But I'm not sure that this has nothing to do with the printer. The printer, however, does not appear in the list of devices in Windows.

  Thanks for providing this information @Bastienne.

  When the installation is stuck? (when he is looking for the printer, before searching for the printer)

  Remove the USB cable plugged in, remove the printer from the Device Manager.

  Under Universal Serial Bus Controllers look for yellow exclamation, impression USB Mass Storage Device Support point or anything with an unknown device. Right click and uninstall the device. Disconnect and reconnect the USB cable and it must be reinstalled automatically print driver. How to make in the Windows Device Manager? If you still get the yellow exclamation point, let me know.

  If you still have problems please delete the old printer registry files.

  Back up the registry first, before performing any of these steps. Back up the registry.

  For computers not HP:

  Press the key R and Windows, open the Run dialog box.

  Type regedit and press OK.

  Click on the + sign next to the following:

  HKEY_CURRENT_USER\Software and delete the folders of HP/Hewlett-Packard.

  HKEY_LOCAL_MACHINE\Software, and delete records of HP/Hewlett-Packard.

  For HP computers:

  Press the key R and Windows, open the Run dialog box.

  Type regedit and press OK.

  Go to the editing tab, and then click search.

  In the search box, type "laserJet P1005" and click Next.

  Only some of them will be related to the printer, and they will have an idea in the description. When it finds one of the entries, and you have confirmed that it is related to the printer, within reasonable doubt, you can remove it by pressing Delete on the keyboard.

  Once an entry is deleted, press F3 on the keyboard, which means find next.

  Repeat the process until all entries printer 'laserJet P1005' are deleted.

  Restart the computer.

  Perform a clean boot on the computer and disable the Antivirus software. How to perform a clean boot in Windows.

  Please describe in detail the best you can of what steps you have taken and what happens during the installation, I hope we can get this figured out soon. Thank you.

• HP Photosmart 5520: Factory definition and "time".

  I have a Photosmart 5520. While I was away I used a different printer and when I came to change the printer to my own he asked me a name administrators and password before proceeding. Of course like so many others I have not the slightest idea what is despite trying many combinations. Then, I tried to find out what others have done and took the printer back to factory settings. When trying to connect to the WPS PIN, (which lasts 4 minutes), he repeatedly said "timed out" just before the end, twice when he had only 1 second to go.

  Can someone please tell me what I should do next.

  Thank you

  Hi @Emar12

  At this point, the fact that you try to connect by using the pin code WPS tells me that you try to reconfigure the printer to your wireless network. If this is correct, run the Wireless Setup Wizard instead. To run the wizard, tap the wireless on the top of the screen (this is the 2nd of the 4 icons at the top), then navigate to and select Setup Wizard wireless. This wizard will search your network and then ask for the password.

  I hope this helps.

• 2 sided with HP PHOTOSMART 5520 e and Mavericks

  I can not put 2-sided on my Photosmart 5520e for Word documents. I'm sure I've seen this option previously in my Menu print but it cannot access it now.

  Hello

  To clarify, the Photosmart 5520 supported automatic duplex printing:

  
  http://WWW8.HP.com/us/en/products/printers/product-detail.html?OID=5157537 & JumpID = oc_r1002_usen_c-001_r0001 #! tab features =
  
  

  Open the file you want to the printer and select print on the file menu
  NOTE: The print window might be minimized. Click Show details to see all the available parameters.
  
  Click the Copies and Pages of the menu drop down and select layout.
  
  Set the duplex as the binding edge Long (Portrait) or binding Long Edge (landscape).
  
  You can save the settings for later use by clicking preset > save current settings as preset. By default, a used preset will remain until another preset will be used.
  
  Kind regards
  Shlomi

• Default AirPrint of reversal of the rather long and short side (printer Photosmart 5520)

  Hello

  When I used to print from my iPad via AirPrint on both sides on my printer HP Photosmart 5520, it used to print, so that you may browse on the long side. For some reason, it changed to printing, so it switches to the short side.

  How can I change by flipping on the long side?

  My son has discovered a fix for this problem. We have now tried on three iPads and whenever he has set.
  The solution is to disable double-sided printing in the options when you are about to print a document and then turn it back on.
  After that the only time anything printed duplex will be sharp long printed not short edge.
  It is not a rocker, I can't get my iPad to print double-sided on the short side now (not that I want to), for some reason once you turned two-sided printing off and on again, long-back becomes the permanent default.
  Weird!
  
  P.S. He arranges for all applications.

• Photosmart 5520: Scan to email: server connection error 403 (with app and scan)

  I scanned to send several times than I can count, but a few days ago, I get nothing other than the error "connection server 403 error." I checked the forums and someone said to go into apps and download the application. It did not work. I rebooted and tried everything, which he expects. Yet, nothing. Is this error to do with something outside as the real servers HPs - or is this something internal that I can fix it? I went as far as I can without resetting to factory settings (which I am fearful because I recently had the country code has changed on this issue and do not want to return to the country of origin), someone has any suggestions other than what I've sifted through the forums already?

  Hey @fruitfly20,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that you have some problems with the scan to E-mail on your Photosmart 5520. I can help with that.

  We can try I couldn't see you is to remove and enable web services. To do:

  1. On the printer, click web services icon that looks like a tablet with a phone beside her.
  2. Click settings.
  3. Click on delete Web Services.
  4. Click again on the Web Services.
  5. Click on accept and Yes.
  6. Try scanning to Email.

  I would like to know if it works. If it does please not then let me know and we can try something else. Even if it solves your problems, so please let other users of the forum know clicking on accept as Solution below my post.

  I hope this helps and I hope you have a nice day!

• Printer Photosmart 5520 problem:, I have access to the secure page and cannot open a session

  My printer does not print in black. I followed all the instructions to fix it. I can't go down loard that assistance because it is a Vista. I get to the secure page and he asked my name and my password. I am the administrator, but it does not accept my names or passwords and blocking me. What name and password it seeks?

  Hi @arts4pat,

  Welcome to the Forums of HP Support!

  I see that you get a secure page and that you are unable to print black on your HP Photosmart 5520 e-all-in-one printer. I'd be happy to help you with this.

  I like that you get the login screen for the Built-in Web server for the printer. Is this correct? This seems to indicate that someone has put a username and password on the printer, for security reasons. If you don't know what are the connection information, the only way to remove this is to do a factory reset on the device. I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  That being said, I would like to start here. Please, try the steps in this guide, the printer prints blank Page or fact not printing black or color ink for HP Photosmart 5520 and Deskjet Ink Advantage 5520 series e-all-in-one printer.

  NOTE: This problem may be caused by problems with the ink cartridge print head or with the printer ink system.

  If you have completed all the above steps and your product still has a problem, the printer service.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to choose your
  contact options»
  Step 4. Scroll down and click on: contact HP options - click Get phone
  number
  File number and phone number are displayed.

  I hope this helps. Good luck!

• Photosmart 5520 now say 'printer offline' all the time and can not print

  I have a Photosmart 5520 which is brand new.  It was working fine and now when I try to print to it continues by saying "printer offline" and prints get stuck in QC the printer is NOT in offline mode and everything seems fine. Please HELP, I need to be able to PRINT to my printer... I use a MAC with OS 10.6.8

  I was printing to device... fine now for 3 days, going beyond the printer (as.)

  Hello djmastermurph,

  Welcome to the HP Forums! I understand your concerns with your Photosmart 5520. How is the printer connected? USB or wireless?

  Please follow this entire document of HP "Printer is off-line" Message appears on the computer and the printer will not print make sure you only choose your appropriate operating system.

  Let me know if this paper solves your problem or not.

  Impatience on your part.

• AirPrint and WiFi printing stopped working on Photosmart 5520

  I have a HP Photosmart 5520 that worked reliably until recent days. I can print is no longer my OS x, using print wifi or iPad, using Airprint.

  My configuration:

  router - apple airport extreme ac

  MacBook pro connected by ethernet to the router cable

  iPad wifi connected to the same router

  HP Photosmart 5520 connected wireless to the same router.

  1. the 5520 has an IP (10.0.1.13) and can address the internet

  2. the router reports the 5520 is connected.

  3. the Macbook can see the scanner of the printer (such as a scanner of Hello) but not the printer.

  4. safari on the macbook can connect to the web server integrated with 10.0.1.13

  5. the ipad can't see the printer via Airprint

  I unplugged and reset the printer, put off the iPad and the MacBook, nothing helps.

  How can I restore WiFi printing and Airprint?

  Have you tried printing via a USB connection to the Mac? Because the printer will print the iPad with a direct wireless connection, there may be a hardware problem.

  At the moment, contact HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 for all other regions, click here.

  Kind regards

• Photosmart 5520 and the mirror image printing

  I have problems printing as well a mirror image. I have a "HP Photosmart 5520'. I read somewhere that this machine has the capabilities but I can't! Help, please!

  Hello

  No, it doesn't have this facility. Please, try the following options:

  • Use a computer program available, like paint or photoshop. These programs allow you to turn and rotate your image to create the image backwards (mirror).
  • Go to the site to Create Mirror Images . This site is free and takes about 60 seconds to do, no download is necessary either.

  Please also visit:

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/there-is-no-setting-to-print-a-mirror-image-to-the/TD-p/1810469

  Kind regards.

• HP Photosmart 5520 - can print but scan and copy the work of doesn´t

  Hello

  I just bought a HP all in one Photosmart 5520. It works fine as a printer, but when I scan or copy I get a 'white' scan / paper in white. And Yes, the text on the paper was facing the Analyzer anyone know whatcould wrong?

  Thanks for the reply AndersRH.

  Sorry to hear about the issue. Because it seems to be a hardware malfunction, I suggest you call the Tech Support of HP. They may be able to give two options for replacement or trade in options.

  If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Take care

• Photosmart 5520 scan gives a black and white page

  I scan a document translates a page black Virgin, if I scan in computers or copy. I downloaded and installed the latest update. If someone had the same problem and it is resolved successfully, I would be very grateful for their help. And if someone has an idea what could be causing this, I'd like to hear about them too. Thank you very much

  Hello there @pilotepure ,

  I read your posts on your scans turn empty your Photosmart 5520, running a Windows operating system. I want to add some of my ideas for you!

  Try a copy, if the copy is also empty, there is a problem of printer hardware.

  Try a reset of power:

  Press the power button to turn the product on.
  With the product, unplug the power cord from the back of the product.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the product.
  If the product does not light by itself, press the Power button to turn it on.

  Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on and can help greatly.

  If copies are turning on fine, run the print and Scan on your PC Doctor and respond with results. Also include what Windows operating system you have.

  All the best