HP laserjet P1108: printer HP Laserjet P1108

Similar Questions

• P1108: laserjet P1108 causing electric shock

  My Hp lasejet p1108 giving only a light application of electric shocks and the curret can be felt on the laptop usb connectors. Please suggest me what to do.

  Thank you. I got the address and the mobile to a service centre number.

• HP LaserJet P1102W: HP LaserJet P1102w prints 1/2 inch too far down on the page

  When I print with that printer using Word, it starts about a half inch of print down on the page.

  I tried to reset to factory settings, but it does not always work on me.

  Any help would be appreciated.

  Hi @2poodles2 ,.

  I see by your post that when you print from Word, printing is printing too far to the bottom of the page. I'd love to help you.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem. Select the method two.

  HP LaserJet Pro P1102 and P1106/P1108 Printer Series - printing a Configuration Page.

  You have this impression of question from other applications?

  If this isn't the case, it may be a margin setting in Word applications. Please check the margin settings.

  Make sure that the appropriate settings are defined in the properties of the printer and the application you are printing from.
  On the file menu in the software, click on print.
  Select the product, and then click Properties or preferences.
  Click the paper/quality tab.
  Check the Type of paper size, paper Source, paper, to ensure that they are correct.

  Try to print again.

  If you still have problems, copy the Word document and paste it into another program, such as Notepad, to see if you have the same results.

  What version of Word are you using?

  How is the printer connected? (USB, Ethernet, WiFi)

  If you appreciate my efforts, please click on the button below the thumbs up.

  Thank you. I look forward to hear from you.

• Printer Driver HP LaserJet 6 p file

  I'll try to find a driver file for my HP LaserJet 6 p printer, it worked great until I upgraded to MAC OS Sierra

  Thank you for your help

  Try to configure your printer according to this instruction, the problems of printer on your Mac - Apple Support

• My hp LaserJet 1022nw fails to analyze the download of the printer driver after that macOS Sierra upgraded.

  After switching to macOS Sierra, my printer (hp LaserJet 1022nw) WiFi does not print work orders, even if the printer seems to be to receive the order of work and how to complete it in the work queue.  Connect the printer to my MacBook Pro via USB, I am able to print without problem.  Other computers on the network continue to be able to print wireless.  When I connect via USB and try to scan a updated driver, download cause analysis a software fault message.  Any ideas on how I could proceed to continue to connect and use my printer wireless with the new OS?  The 1022nw is detectable as a printer available (wi - fi) and can normally be added to the list of printers, but doesn't have the print queue even thought that they seem to have been dealt with, and then disappear from the queue.

  Open System Preferences > Printers and Scanners and select the print tab.

  Then the right or control click on the printer on the left then click: reset the printing system

• I get a pcl xl error message when we print our LaserJet Pro 400 Color MFP

  When I scan or fax, we get:

  PCL XL Error

  Subsystem: TEXT

  Error: InternalError 0 x 50

  File name: cheettext.c

  Line number: 710

  The printer is a Pro 400 Color MFP LaserJet - m475dw

  Windows 7 Professional Service pack 1

  What should I do to fix this?

  Thanks for the help.  I actually did an update of the firmware and it solved the problem.

• LaserJet M1212nf MFP: Setting up printer blocked by the administrator

  Hey. I've updated to win 10 - now try to install the printer LaserJet have disabled Kasperski, but still get the msg: an administrator has blocked you from running this application. For more information, contact the administrator.
  Pls help.
  Thank you

  Good afternoon @Wogla777,.

  It is a great location for extra support! I see you are having problems installing the printer software. I'd be happy to help you.

  I have provided with steps to unlock the hidden administrator account and the installation of the printer on this account to see if this will help this situation.
  
  Note: Do not connect the USB cable until you are prompted during the installation.

  • Go to your Start menu and in the box "search programs and files", type CMD.
  • CMD will fill as an option to search above, just right-click on it and "run as Administrator".
  • Once opens in CMD (command prompt), type net user administrator / Active: Yes and press ENTER.
  • Then, close CMD and then restart your computer.
  • When your computer is on the newspaper in the new account which should show. It will be called Administrator and will not have a password on it.
  • If your computer automatically connects to your account after the restart then go to your Start menu and click on the arrow next to 'shutdown' and choose 'change user '. Now log on to the administrator account, that we have just released.
  • Under the administrator account, install the printer software.
  • Test the printer.
  • To disable the Admin account start at step 1 and type net user administrator / active: No..

  If you still experience this issue, it may be the user's profile. Create a new user and try to install the printer on this account.

  • Open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  • Click on manage another account.
  • Click on create a new account.
  • Install the printer on this account.

  To say thanks, you can click the 'Thumbs Up' and if the question
  is resolved you can click on the button "accept as a Solution.
  Please let me know the results. See you soon!

• LaserJet p1102w, windows 8.1, prints, but reports error

  My laserjet P1102W prints fine wireless, but an error every time.

  Yes, I reinstalled the latest version of the installation software. Yes, I tried printing doctor, he found nothing.  Yes, I downloaded and installed the latest drivers from that date.  Yes, I tried the tool which is supposed to find the latest drivers he, he did not support this version.  Yes, I looked at the ethernet configuration and it was fine - I'M able to print as I said.

  No, none of this has worked.

  I receive the error message in the upper right of the screen whenever I try to print.  All that says is that the printer cannot print the file.  Yes, this happens since the print spooler.

  So, what's next?

  Hi @draythomp,

  I see by your post that you are able to print on the wireless network, but you get a message error "the printer can print the file. You have successfully updated the software of the printer with the same results.  I can help you with this, but I need more information.

  This error appears when printing from any application?

  Meanwhile, empty folder of spool and restart the print spooler.

  How to clear the current print queue in Windows Vista and Windows 7.

  You also update the firmware of the printer?

  If this isn't the case, then I would update the firmware to see if this will help. This, although by a USB connection.

  HP LaserJet Pro P1102w printer drivers.

  Select your operating system, click Next, click the link for the firmware.

  What operating system do you use?

  Mac OS X: how to find which Mac OS X Version is on my computer?

  How to find the Windows Edition and the Version on your computer.

  Good day!
  Thank you.

• ColorMFP LaserJet M175nw 100: connect printer Laserjet 100 wireless

  Due to the recent DDOS acctack on servers DNS of Dyn Corp, it was recommended that all passwords and secret phrases on routers and Internet all devices be changed. I did this on all my devices and I'm successful with the exception of the 100 Laserjet Printer.  When you use the arrow keys on the printer to access the "network" Menu, I get a response indicating 'Access disabled Menu'.  I also have this same answer for the configuration of the system and Service.

  So I correctly uninstalled the printer and tried to reinstall it.  In doing so, I am only able to put in place as a USB printer and not a wireless printer.  Trying to set up as a printer wireless Configuration utility see the SSID of the router and then when he's in the Install utility installation fails.  I turned off and unplugged from the computer, printer and router and re-run the routine without success.

  In my view, if there is a way to set the default printer, it will disable the block on access to the "network" Menu on the control panel of the printer and then I would be able to configute the operation it's wireless.  I would also appreciate other possible solutions.  Thank you!

  Hello @burtech,

  Thank you for your participation in the Forums of HP Support! After reading your post, I see that you need to reset the printer. I want to help you with this issue today.

  I can provide reset for you in the product Monograph.
  In the forum next to our name to handle just click on the envelope
  to see it.

  You can click on the button 'Accept as Solution' and the 'Thumbs Up' for my efforts. Please let me know how it goes. Have a great day!

  You can click on the button 'Accept as Solution' and the 'Thumbs Up' for my efforts. Please let me know how it goes. Have a great day!

• Unsupported personality: PCL on print Laserjet 1012 from Windows 7 Pro 64-bit

  I have an HP Laserjet 1012.  My PC has Windows 7 Pro 64 bit.  I used the Laserjet 1015 PCL 6 drivers.  When I printed the first two times, it worked fine.  Now each page just print "Unsupported personality: PCL ' at the top.

  What should I do now?

  Thank you for your ' Experts for a day Tech Support.

  Mark

  Hi rbarbo43,

  I found the following thread that will help you during the installation of the printer in Windows 7. Let me know if you need assistance?

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/LaserJet-1012-driver-for-Windows-7/m-p/351356#M16114

• LaserJet P1102w: HP LaserJet P1102w prints EXTREMELY slow by Wi - Fi

  I was struggling with this problem for a long time, but today it completely freaked me. I was ready to throw this piece of... printer!

  Problem is simple. When I try to print something wireless with graphics (jpeg or pictures images) to my iPhone, the iPad iOS 8.4 or the MacBook OS X 10.10 Yosemite, it takes forever! Document Word, PDF, preview or other programs - same result! I couldn't pring 9 pages today, after that 20 minutes, I gave up.

  What is going on. Let's say I'm on mac. Special print goes to the queue of the printer, as usual. After that, this task shows in the queue as 'connection to the printer', green light flashing on the printer, as usual. It takes a minute or two, it's this that unusual. After that, "printing page 1 of departure." This can take 1, 2, 3 minutes... forever! Then a page prints in fact (for 5-7 minutes at this stage brand) and it takes time even to print page two and so on, or (probably) it will spit the unfinished page (only two or three inches printed and the rest of the page is empty) and displays an error flashing light orange. UGH!

  I gave up on iPhone/iPad it long, since they can't see the print queue and it is the unpredictable result. You can wait 10 minutes for your document, and then leave and then just find the document printed when you no longer need (or half of the document).

  I don't have this problem when you print any text, emails, simple confirmation of safari pages and so on. Only when printing document with pdf graphics or heavy. I don't have this problem when you connect the printer via the USB port (discovered this today). Now what really bothers me, is the fact that I actually could print heavy machine PDF Windows without wireless problem (I had exact problem even print document from my mac). What is going on?!

  I googled this problem and found that I am not alone. I've updated all the software and firmware, I tried to reset everything - No. DICE! It's really very frustrating. I thought that this is because of the memory of the printer, but why it works perfectly via USB then?

  In any case, it is a cry from the heart. Help, please. The printer is good, but unusabe in certain situations.

  Hello @Ivan4!

  Welcome to the community of HP.

  I hope you have a pleasant experience here!

  I want to help you with slow printing that you encounter when you print images of your HP LaserJet P1102w wireless of your Apple devices.

  I thank very you much for the detailed description. Because the printer is able to print fine wireless windows machine, we know that the issue is not with the printer or the communication. The fact that none of the Apple devices are able to print wireless images without being really slow, leads me to believe maybe it's a problem with the AirPrint driver or the Hello protocol that your Apple devices use to communicate information.

  Image files are much larger, and much more data needs to be transmitted, so it is normal for them to take longer to print than a regular text document. However, if there is a marked difference in speed between the Windows computer and Apple devices, then the question is probably not just the files are larger.

  I want you to make sure that the printer is installed with the driver on your Mac. (Because there is no feature complete HP software available for Mac 10.10 operating system will often default to the AirPrint driver)

  1. Click on the Apple icon on your Menu bar.
  2. Select System Preferences.
  3. Choose Printers and Scanners.
  4. Select your printer and press the (-) button at the bottom of the list to remove.
  5. Select (+), and then click Add printers and Scanners. (NOTE: do not select the printer in the list of printers nearby as this will often use the AirPrint driver automatically)
  6. Select your printer (one that shows multifunction Hello under 'Type').
  7. At the bottom of the window under use: does say AirPrint? If so, click on the drop-down list , and you should see a specific driver for the printer. Click on Add.
  8. Try to print a picture once again and let me know the result.

  If it works to solve the problem, then I suggest downloading the HP ePrint app on your iPhone / iPad to print. It may be a problem of incompatibility between the AirPrint on your Apple devices and your router.

  I look forward to hear from you and work at a resolution of this problem.

  

• Color LaserJet MFP Pro 277dw: MFP will print but not scan since update Mac OS 10.10.5

  I had used my LaserJet MFP Pro wireless without problem for several years, with the Mavericks and Yosemite.  A few weeks ago a "update" the printer system is invisible.  After several hours of troubleshooting and to try five or six corrections, I finally got the printer online by using the IP address.

  My computers, however (a performer of the Mavericks and a Yosemite running), do not see the scanner.  It's not a question of adding - they do not to add it.  By HP support, I have reset the system print and tried to start over.  I downloaded HP Easy Print (or Easy Start or whatever), which is the entire site of support in the way of software for the 277dw of the ACM.  The software through me the entire upward and congratulated himself for a job well done, but my printer was not, in fact, related.  He appeared in the printers Control Panel, but would not print.  Just "connecting to printer" in the queue for ten minutes about until what I called off work.  And the scanner does not yet show in the Image Capture, preview or HP Easy Scan.

  So, I went back to my previous fix for the printer, use the IP address.  Any ideas on how to get the scanner appears?

  Hello

  Restart your router by unplugging its power for 30 seconds.

  Once it is fully up and you have internet access on your Mac reboot both the HP printer and the Mac.

  From system preferences, select Printers and scanners and click on the plus sign to add the printer again.

  Can you now ee he listed as Hello type or not?

• LasrerJet P2015n: Low error when printing with ePrint to a LaserJet P2015n on iOS supplies

  "Hi, I'm using the HP LaserJet P2015n, which works very well, however try to print using ePrint on iOS 8.3 seems to cause problems. If the application finds the printer on the network, and try to print, it invites a mistake "we have detected you are low on supplies error" obviously is not the case, because it is more than 50% of the full and prints very well using the desktop computer. The printer error LED keeps blinking and won't not even respond to a request for printing office. It must be restarted to work again.

  Tried all kinds of reboot and reset. I also tried to find a solution with no luck, there is no updated firmware for this printer can be found as well.

  Any help will be very appreciated!

  @hussain316

  Thank you, based on the information you provided... the p2015 is not taken care of with ePrint. That's why whenever you send a print job for printing, the printer responds with error messages and you have to pick up then power cycle the computers can be printed successfully on it.

  If you want to start mobile printing, then you will need to upgrade to a new printer with function ePrint. Depending on your price range, the new m277 is a nice little printer and has this ability.

  Sorry

• HP Laserjet 2840: HP Laserjet 2840-custom color print after Windows update.

  I updated my Windows 8.1 operating system (64-bit) with the provided updates, automatic updates of Windows, about two weeks ago.  After that my HP Laserjet 2840 will not print anything in color.  It copy in color, so I know that the printer still works.  Ayone have any ideas as to why this happens, and yes I tried to reinstall or update printer drivers provided on the HP website.  Still does not work and want a solution or I will throw this printer out the window, literally and buy something new that works with 8.1.

  Updated - with the help of the forum search on another HP Color LaserJet-cannot print in color - I used these steps in this post to solve my problems of color printing.  Please keep this forum so valuable to others who have questions and need to find solutions.

• LaserJet Pro 200 m251nw: how to disable these pages printing pesky notification?

  I just bought the LaserJet Pro 200 m251nw to help with homeschooling and coupon printing. A big HUGE machine so far, one small complaint... whenever I have do something or something (ie: plan a printout of the spreadsheet on an app) Springs this page full color printing. I don't want to lose my ink telling me I just do what I know already! Can I disable it somehow? Thanks in advance!

  Hi @g33kyg1rl

  Welcome to the Forums of HP's Support.  I see you want to learn how to turn off notifications in HP connected for your Laserjet M251nw printer.

  Please follow the steps listed below:

  1. Connect to your HP account connected, which will take you to the Welcome screen.
     
     
  2. Please click the drop down arrow next to 'Settings' menu and choose 'Notifications '.
     
     
  3. If please check or clear the parameters of notifications that you prefer and then click on "save changes".
     
     

  Please let me know how it turns out.