HP LaserJet P1505: Deadlock Driver install with printer HP LaserJet P1505 with 10 Family Edition, 64-Bit Windows

Similar Questions

• I just had a new hard drive installed (with XP), and no matter where I set the resolution, everything seems to be stretched horizontally

  I just had a new hard drive installed with XP, and no matter what I set the resolution to, everything now looks stretched horizontally.  I don't have this problem with the old hard drive containing XP

  If you did a clean installation of XP, then you must install the hardware drivers for your components. Go to the website of the manufacturer of your PC, then download and install the latest Windows XP drivers for your model.

  SC Tom

• Printer driver crashes when printing with Office 2013/8 64-bit Windows

  Printer: HP Color LaserJet CM1312nfi

  Printer driver: V5.1 (to date, downloaded from the HP support Web site) or generic V5.6

  OS: Windows 8 Professional 64-bit

  When I try to print an Excel document with Excel 2013 and V5.1 printer driver, the program freezes and must end with the Task Manager. This always occurs with the same document, but not with all the documents. Program also crashes when opening the preview before printing to the same document.

  The same document prints fine with V5.6 generic print driver and with the driver supplied with Windows 8.

  The same document prints fine with the driver version 5.1 on Windows 7 and Office 2010. The combination of Windows 7/Office 2013 has not been tested. Windows 8/Office 2010 combination has also not been tested.

  When I try to print an empty document with the word 2013 and the generic printer V5.6, the program driver crashes and must end with the Task Manager.

  My conclusion is that the HP printer drivers have a problem with Windows 8 or office 2013 or a combination of both.

  The printer driver supplied with Windows 8 and is installed automatically is useful as a temporary workaround, but it lacks some options, e.g. manual duplex.

  Upon request, I am ready to send the Excel document by e-mail for verification of the problem.

  For any help or suggestion will be appreciated.

  Thanks in advance,

  ULI

  It worked!  Thank you very much.

  Where others have difficulties to find the offending setting, here's another way to track him down.

  -> control Panel-> devices and printers-> (select printer-> right mouse)-> printer properties-> settings-> tab Installable Options (bottom)-> Printer Status Notification-> change on 'off '.

  Thank you!!

• I am trying to install a printer/scanner HP F4400 on Vista Home Premium 32 bit and may not have to install.

  HP has me turn off the firewall, hide windows programs, uninstall HP System.  I also cleaned the registry, disk and defrag, I also downloaded the hotfix from Microsoft and it is impossible to identify the problem or difficulty there.  At one point I could get to download the software before I would get error messages or #33472310 and 25672887.ZIP.  Now I can't get that far, I get to the point where he say he prepares the system for installation when it stops with the message "the system cannot ind specified path. I'm not now about to install I was Sunday when I started.  Can anyone help?

  Hi Julien,

  Please provide the complete error message you receive when installing the printer software.

  I suggest you try the following steps:

  Step 1: use the Windows Installer Cleanup utility for delete all entries that are associated with the product that you have trouble to install (printing software):

  Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.

  In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/default.aspx/kb/290301

   

  Step 2: Put the computer to boot and then try to install the program

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Driver problem with prolific USB-to-Serial and Windows 7 connector

  I'm trying to connect a UPS to PowerPanel to my new ACER computer with 64-bit Windows 7 via a prolific USB-serial connector software. The convenience store says he has a driver problem the convenience store is unable to correct. However, messages also said that my driver is up to date and the device working properly. I have installed, uninstalled and tried to fix several different drivers, run the troubleshooter, etc.. I tried to run the stand-alone Windows Installer, but it says "not compatible with your computer." Help! Is there anything else I can try?

  Hi Mary,

  Until solve us the problem we need more information on the issue.

  ·        What is the exact error message that you receive when you connect theprolific USB-serial connector to your computer?

  ·         Could you plug the connector on the computer as soon as possible without any problem?

  ·         What is the model number of the connector?

  ·         The ups and the computer manufacturer and what is the model number?

  ·         Who is the stand-alone Windows Installer you tried to install?

   

   

  You can first check if the USB connector to prolific series model if its compatible with windows 7 Access the link below to check the compatibility with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  You can also contact themanufacturer prolific USB-serial connector and check if the device is compatible with Windows 7 and if you need to install any other drivers to get the device to work.

   

   

  Post back with the required information.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have problems installing with kaspersky internet security, 2015 on windows 7

  Original title:

  internet security Kaspersky 2015

  iI problems of installation with kaspersky internet security, 2015 on windows 7 will not install it comes up with a message to reinstall net framework from microsoft which I did & the question was not resolved.i however installed on my other pc that runs vista without issues.has - what someone has encountered this and if so is there a resolution? Thank you

  Make sure that you install the .NET Framework 4.5 for Windows 7, not 4.0.

  Also try to stay connected to the Internet during installation:

  http://support.Kaspersky.com/11045#Block1

  You can also do a clean boot.

• acquire at 800 Mbps with avt pike on 64-bit Windows Vista

  Hello forum,.

  I'm using labview 2010 (32-bit) on a 64 - bit windows vista system (Yes, I didn't improve my labview soon) and I have an AVT pike f023b camera connected via a firewire 1394b port.

  Before, on a system 32-bit, I could acquire using 800mbps buspackage AVT, but it does not work with 64 bit systems.

  does anyone know how to get 800mbps with Pike camera using labview?

  Thank you.

  Veritas

  If you are using a 3 rd-party with IMAQdx bus driver (no doubt so things like 800 operation will work under Vista), you must contact that provider to see if they have a 64-bit version available. Otherwise IMAQdx will use native drivers in the OS provided for the bus interface. The drivers provided by the OS does not support 800 on Vista, but they do on Windows 7.

  Eric

• I have a Toshiba Satellite A85 with XP Home Edition series. Windows does not start. At startup I get Toshiba logo then a black screenwith cursor upper left. Can I save it?

  Toshiba Satellite A85 Celeron with XP Home edition. Windows does not start. I have Toshiba logo screen, then it turns into a black screen with the upper left corner of the cursor. I have the recovery disk. Is it possible to record HD without re-formatting and losing all data?

  Thank you;

  Lobo77

  If you run the Toshiba recovery application, you will lose all your data.  As indicated in the warning, this application will restore the computer back to wherever it was when it was first delivered by the factory.

  Without other complementary diagnostic information, it is difficult to determine what is happening.  Pressing the key (do not hold) of F8 beginning immediately after that the sequence of power should bring you to the Advanced Boot Options menu.  Try again then press repeatedly the key rather than pressing on and now.

  The recovery CD Toshiba, you have probably does not allow a "repair installation".  Contact Toshiba to see if they will provide you with a suitable CD.

  Given the fact that you can get a useful place when you start with the Toshiba Recovery DVD, my guess is that the computer is OK but that the hard drive has failed - or maybe more likely - the startup information is damaged so that it does not start.  If you have access to a computer equipped with a burner, download and create a bootable Windows CD.

  There are a number of available bootable CD which include various recovery and diagnostic tools.  You'll have to do some research to find out how to use the tools.

  Ultimate Boot CD 4 Windows
  Ultimate Boot CD
  Hiren BootCD

  If you feel overwhelmed by the tools and I just want back the data, and then use the Toshiba Recovery DVD, make you a Knoppix CD and use this key to your data, preferably on a network connection.

  If all this sounds like too much for you - and there is no shame in admitting that--take the laptop for a good local computer repair shop (not a type BigBoxStoreUSA or rather GeekSquad) and ask them to check it out and make sure to recover your data before anything else.

• problem with Realtek RTL8188CE on 64-bit windows 8

  Hello

  I own a Pavilion dv7-6c90el that I updated to windows 8 two weeks ago. Each week a problem occure: my pc cannot connect to any wifi, and I can't turn off the wifi card, it does not, so I have to pass several times the pc turned off until it starts working again (after several times, you can enter the connection menu and disable the card and then turn on it other times) then works). I guess that's a driver problem (with windows 7, this problem never appeared). You can correct? Thanks in advance

  Hello

  Finally I solved uninstalling "assistant hp wireless" and by downloading an update of windows (I searched on the internet) for 'wireless button' and now it works fine.

• no option to install after right click on HV___. Police PFB in 64-bit Windows 8

  I try to install Helvetica on 64-bit Windows 8.1, all the forums that I read told me just right click on the policy and click installation... simple.

  Well, when I click right I do not get the option to install, any ideas?

  

  You have either got bum tips or you did not get quite the correct instructions.

  You must as well the . PFB and the . PFM files associated with the police in the directory. You do a right click on the . PFM file to install the font that uses then the two files together for complete and correct installation.

  If you don't have the two files, you can not install the font. The . PFB file contains the sketch and the police referring to information with measures of rudimentary fonts. The . PFM contains more complete required font metric information for programs that need to format the text by using the font.

  -Dov

• driver installed with no hardware has been disabled

  When I start my computer, I get a window on a driver has been disabled due to a conflict between the version of windows visa, and the driver perticular. It started when I tried to run a cd with photos to scan program.  I would remove this driver so that I don't get the window when I start my computer, but can not find, can anyone help.

  Hello Williebee,

  Thank you for your message.  Please let us know the exact error you get as well as the make and model of your computer.  It may be better to just go to the Web site of the manufacturer of the computer and download/install the latest driver that is causing the problem.
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Problem installing with fsx deluxe edition

  I had a previous installation of Flight Sim X, but uninstalled it centuries ago. Yesterday I got a new copy and this morning attempted installation. After you insert the disc 2, a pop-up asked me to "insert disk". Which drive? Not sure if this meant disc 1, but it didn't work anyway, so I re-inserted disc 2 and got the same pop-up again and cannot go any further. Someone knows what to do?

  I use Win XP Professional 2002.

  Nick
  

  Hi Nick,

  ·         What is the full error message?

  Follow these methods.

  Method 1: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state from the link to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2: Follow the steps in the article.

  Error message when you install a Microsoft game or a mapping program

  Microsoft games: InstallShield Error Messages

  For reference:

  Solve problems with activation for Microsoft games problems and mapping programs

  Frequently asked questions on how to enable Microsoft Games for Windows, streets and trips and Mappoint

• Problem installing with WPS54G on new computer w/Windows 7

  When settiing upward the PS on a new computer with Windows 7, I get 2 error messages.  The first is: "address is not valid - enter a valid address - try again."  The other rises after that: "Put in failure-error Code 87 printer."

  The PS is set up on another computer in my home and works very well.  The printer is set up on the new computer.  Is this a compatibility issue with Windows 7?

  Can I fix?

  As the Printserver is already installed, you don't need to run the CD for the Printserver again on the new computer. You just need to open ports on computer Windows7... Check out this link.

• I can't install my printer Epson Stylus Photo RX 420/425 in my new Windows 7 .__What can I do?

  I have Windows 7 and I have an Epson Stylus Photo RX 425 - in Windows Vista, I had no problem - but now does not work my printer in my dear 7
  Please help me - should I buy a new printer?

  Looking at the Epson site for these drivers, I see that the latest version, they offered was from 2007. Here are the instructions for using Windows Update to install the drivers for the printer on Vista . I don't know if it will work in Win7, but it's worth a try. If this does not work, then you can contact Epson to see if they will be providing drivers for your printer. Frankly, it is doubtful. Is there no drivers, then you will not be able to use this printer with Windows 7.
  http://www.Epson.co.uk/Printers-and-All-in-Ones/Inkjet/Epson-Stylus-Photo-RX425/drivers-support;jsessionid=6A02FE6FC234F2A34D3CDF3E103FF2D6. Acc1? Target = article & Extn = .html & ArticleID = 1282 MS - MVP - Elephant Boy computers - don't panic!

• Bus driver SM with yellow mark after installation of Windows XP Pro

  Finally, I have windows xp pro loaded. But in Manager device theres a yellow mark sm bus driver. Searching the forum I seem to have fould to her in the video driver ATI pack. But when the driver is loaded it messes up windows so it does not start.

  Can anyone help?

  Paul

  Hello

  I am reading other threads and it seems that you have a laptop Satellite Pro A60.
  What can I say you installed the OS manually and in my opinion a simple driver is missing
  Have you tried to install the infrared driver of the European driver Toshiba page?
  It may be a key

  In any case, before you start the manual installation of the OS, you must read the Installation Instructions. You will find all drivers that must be installed and the proper installation order.

  Please check this document and follow the guidelines