Similar Questions

• HP laserjet professional P1606: how to change static ip address for HP laserjet professional P1606 dn

  Dear Sir.

  I have the professional printer hp (hp laserjet P1606) model, I have connected the printer to my router by ethernet port. Thus, he got a dynamic IP, that we know changes this dynamic IP most of the time and create problems. If I click on the ip address of the hp printer on the list of clients of wifi router. There is possibility to provide the static ip address for printer I did and gave a static ip address. a few days later the router has been restored and then I face the problem is I couldn't Ministry the ip address of the printer.   How can I access the ip address of the printer... because until the printer is not an IP and I click on the ip address and a printer page does not open I couldn't change the ip address or the type of static or dynamic ip... .the photos I have uplaoded...

  

  Hi @Tahir-Mehmood,.

  I would say to restore the printer back to factory settings. HP LaserJet Pro P1566 and P1606dn - default settings factory restore printers.

  Then, the router must assign a new IP address to the printer and you should then be able to again access the server built-in Web printer.

  If the router assigns the printer IP address automatically, temporarily connect the printer to the computer using the Ethernet cable and ad hoc of the printer. This will give you an IP address so you can access the printer built-in Web server, and then you can configure the IP address again through your network.

  I hope this helps. Thank you.

• HP Laserjet pro P1606 does not print some pdf documents

  My HP laserjet P1606 does not print some pdf documents.  It is connected via USB to my imac (OS 10.7.5; Adobe Reader 9.5.5). My wireless HP Photosmart 6520 has no problem printing my pdf docs.   Not sure why some files pdf is able to print on the P1606 and others not.  All solutions?

  Hi @JL_MAC,.

  I understand that you are not able to print all the PDFs of the HP Laserjet P1606dn, but can the Photosmart 6520. I can help you with this.

  Run all the updates to Adobe Reader to see if that helps. The latest version is 11.0.

  It could be a problem with the language of the printer.

  The Laserjet P1606dn printer is failed and the printer Photosmart 6520 PCL3 GUI language.

  I hope this helps.

  Good day!
  Thank you.

• HP LaserJet Professional P1606: status is constantly stuck on "print".

  Hello

  I have a problems with an HP LaserJet P1606dn Professional.

  Connection to the printers web UI status is constantly stuck on printing. Once the printer is restarted there seems to be a large print job who wants to print. When the cancellation of the physical printer print job the printer is idle and then you can not print that print jobs get stuck in the queue. It seems that there is a print job that is stuck in the memory, but I have no idea on the compensation it on the printer.

  The printer queue is configured on a server and is distributed by group policy. The directory on the server and individual computers spool\PRINTERS is empty so not stuck jobs that could be corrupted. Spooler service has been restarted the server and PC, but not luck. Print on both the server and PC with different accounts produces the same result.

  Is there a way we can erase the memory of the printer? Or check the queue of printers in the UI?

  Eventually the solution for people who could come through what I had to re-create what follows:

  * DHCP reservation (Gave printer a static IP address).

  * Deleted and re-created the printer queue on the server.

  * Queue deleted and recreated the printer on the client computer (GPO if has refreshed not this).

  * Remove old pot numbers.

• HP LaserJet Professional P1606: HP Web Services Installation - connection error. Check the Internet connection.

  I try to activate the Services Web of HP but connection error. Check the Internet connection. .

  I use the static ip address with the address of the preferred DNS: 8.8.8.8 and 8.8.4.4 and it does not work.

  I changed to DHCP as it does not work.

  I have a ZTE home modem router connected to the printer.

  The link below should help you.

  http://h30434.www3.HP.com/T5/user/viewprofilepage/user-ID/2585903

  Kind regards

  Oliver

• HP LaserJet P1606dn of duplex professionals second page prints upside down

  Sided printing worked fine when I arrived at the printer.  Now second page prints upside down.  I tried to install the driver XPS that worked once, but not now.  I have at least 8 copies of XPS Laserjet P1606dn of professional on my computer.  None of these troubleshooting options on any of these working copies.  I tried to reinstall the software of origin, but in vain.  Now the only copy printer I have that works, one side only, is hp p1606dn copy 3.

  Help, please

  Success, finally.  The application of service worked for me, after several tries.  I was able to remove all instances of the printer and re install.  The professional p1606 HP Laserjet still printed upside down, but after having installed the XPS (a previous forum suggestion suggestion) version it worked.

  Thank you.  I'll search the app of congratulations and give him a boost upward!

• Printer Driver HP LaserJet 6 p file

  I'll try to find a driver file for my HP LaserJet 6 p printer, it worked great until I upgraded to MAC OS Sierra

  Thank you for your help

  Try to configure your printer according to this instruction, the problems of printer on your Mac - Apple Support

• My hp LaserJet 1022nw fails to analyze the download of the printer driver after that macOS Sierra upgraded.

  After switching to macOS Sierra, my printer (hp LaserJet 1022nw) WiFi does not print work orders, even if the printer seems to be to receive the order of work and how to complete it in the work queue.  Connect the printer to my MacBook Pro via USB, I am able to print without problem.  Other computers on the network continue to be able to print wireless.  When I connect via USB and try to scan a updated driver, download cause analysis a software fault message.  Any ideas on how I could proceed to continue to connect and use my printer wireless with the new OS?  The 1022nw is detectable as a printer available (wi - fi) and can normally be added to the list of printers, but doesn't have the print queue even thought that they seem to have been dealt with, and then disappear from the queue.

  Open System Preferences > Printers and Scanners and select the print tab.

  Then the right or control click on the printer on the left then click: reset the printing system

• How can I connect my iMac for HP Laserjet CP2025 El captain

  Connection to HP Laserjet CP2025

  Just replaced my printer laser jet CP2025 with a replacement from eBay (given that it works!)  Previously used one daily for a few years without problem, it of the same model but keeps saying printer idle or not connected, even if it has been folded and selected on the screen.  So, I deleted all of the printers in my preferences that I had amassed 6 different printers and use only 2 BUT now cannot add any back? I use OSX El Capitan on an iMac 2013 end suggestions would be appreciated

  This article should help you to solve the problems of printer on your Mac - Apple Support

• I need the Hp Laserjet M2727nf Hp scanning software

  Need a Hp Laserjet M2727nf Hp scanning software

  You really have a classic Mac, a very old machine now.

• HP Color Laserjet: HP Color LaserJet - lines/stripes

  Hello

  I have a HP color LaserJet and I get a lot of lines and streaks on my printed pages.

  I also note toner inside the printer and my printer seems to take cleaning cycles more than before.

  Thank you!

  Although I work for HP, my posts are MY opinion and not those of HP.

  I would recommend some of the things

  First of all, make sure that your firmware is up-to-date, go to the page software and drivers on HP.com download and install the latest firmware available for the printer.

  Then, make sure that the toner collection unit is not complete

  Finally, print a cleaning of the control panel of the printer page, normally, you should select the following text in the menu:

  • Maintenance of the unit
  • Calibration / cleaning
  • Cleaning page

  You can also view this document as well.

  HP Color LaserJet Enterprise M552, M553 and MFP M577 - lines/stripes, toner and cleaning cycles dust excessive

  Hope that helps.

• Color LaserJet M277dw MFP: Cartridge not recognized after HP recently updated.

  I can use WIndows 10 if the fix is available for this OS.

  I recently updated my HP LaserJet, and after the update, he refused to print, scan or copy. The error message on the display says: "Cartridge not recognized" and it has a large image of the yellow and black cartridge, cyan and magenta those smaller, but below. The printer has a wireless connection to internet.

  Any help would be greatly appreciated.

  Thank you

  Hello

  Install the following firmware for your printer, and then look for a difference:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/swItemId/kJ-149905-2

  Kind regards

  Shlomi

• Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%

  Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.

  I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.

  I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.

  I had care of do not connect USB until you are educated.

  I tried repeating the installation without uninstalling first and get the same result.

  I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.

  I tried to do a right click to run the installer as administrator and get the same result.

  I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.

  The event viewer displays none error entry at all and no entry identifies HP as the source of an event.

  I tried to connect via USB 2.0 and 3.0 ports.

  I cleaned recycle them and temporary folders.

  I have updated the firmware of the printer to the 20160331 version.

  Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.

  I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.

  Thanks for any help solving this.

  I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.

  DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)

  1. go into the Device Manager and find the printer in the list of devices

  2. right click on the printer and select "Update Driver software"

  3. click on "Browse my computer for driver software".

  4. choose "Let Me pick one...» »

  5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)

  6. click next and back to the installation of hp box and must now see the printer and continue the installation.

  -Alex

• I get a pcl xl error message when we print our LaserJet Pro 400 Color MFP

  When I scan or fax, we get:

  PCL XL Error

  Subsystem: TEXT

  Error: InternalError 0 x 50

  File name: cheettext.c

  Line number: 710

  The printer is a Pro 400 Color MFP LaserJet - m475dw

  Windows 7 Professional Service pack 1

  What should I do to fix this?

  Thanks for the help.  I actually did an update of the firmware and it solved the problem.

• LaserJet M1212nf MFP: Setting up printer blocked by the administrator

  Hey. I've updated to win 10 - now try to install the printer LaserJet have disabled Kasperski, but still get the msg: an administrator has blocked you from running this application. For more information, contact the administrator.
  Pls help.
  Thank you

  Good afternoon @Wogla777,.

  It is a great location for extra support! I see you are having problems installing the printer software. I'd be happy to help you.

  I have provided with steps to unlock the hidden administrator account and the installation of the printer on this account to see if this will help this situation.
  
  Note: Do not connect the USB cable until you are prompted during the installation.

  • Go to your Start menu and in the box "search programs and files", type CMD.
  • CMD will fill as an option to search above, just right-click on it and "run as Administrator".
  • Once opens in CMD (command prompt), type net user administrator / Active: Yes and press ENTER.
  • Then, close CMD and then restart your computer.
  • When your computer is on the newspaper in the new account which should show. It will be called Administrator and will not have a password on it.
  • If your computer automatically connects to your account after the restart then go to your Start menu and click on the arrow next to 'shutdown' and choose 'change user '. Now log on to the administrator account, that we have just released.
  • Under the administrator account, install the printer software.
  • Test the printer.
  • To disable the Admin account start at step 1 and type net user administrator / active: No..

  If you still experience this issue, it may be the user's profile. Create a new user and try to install the printer on this account.

  • Open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  • Click on manage another account.
  • Click on create a new account.
  • Install the printer on this account.

  To say thanks, you can click the 'Thumbs Up' and if the question
  is resolved you can click on the button "accept as a Solution.
  Please let me know the results. See you soon!