HP LaserJet P1606dn IP Configuration problem

Similar Questions

• Configuration network LaserJet P1606dn

  Hello world

  I have a problem with establishing a new LaserJet P1606dn on our network. The installation software provided with the printer assumes the environment uses a DHCP server to obtain an initial IP address and then you can evaluate the printer through the web interface and change it. My problem, we do not have DHCP on our network and I need to set up an IP address on this printer. My question, is there any other utility that can be used to find the printer, and then set the printer with a static IP address.

  Thank you in advanced for assistance.

  Steven

  Too bad. I found another way to access the printer. It seems to have assigned the printer an IP 169.254.x.x wherein I changed my desktop to the same subnet and then access the printers web interface to configure networking for the correct IP subnet.

• Printer HP LaserJet P1606dn Professional after firmware update

  Hello!

  I upgraded my HP LaserJet P1606dn Professional today the latest version of the firmware 20110826, of 20101011.

  Everything worked perfectly with the old firmware, but after the upgrade I can't print via network, although it works with USB printing.

  I printed a page of device configuration, and everything is as it was with the old one, which happens to me from printing, except his status in the network information section, which is 'boot' instead of 'connected '.

  I can't access the web interface via my browser by typing the IP address that is provided in the device configuration page (which is the same as the old, btw)... no idea?

  I also tried printing as well as access to content the printer via the web from different computers on my network, one with Ubuntu, another with Windows XP, and both get the same problems.

  Thank you!

  Hello!

  I finally solved it, the problem was the setting of DNS which has been reset when the upgrade of the firmware. I followed the following steps:

  -Reset the configuration of the printer

  -Connect to the web interface printer with the IP address the printer automatically sets to himself

  -Change all configuration, including DNS

  Thanx

• HP LaserJet Pro P1606dn: Fatal error Laserjet p1606dn - hard reset does not help

  I powered on my printer this morning and having to "calibrate" - type sounds for about two minutes, the Attention, ready, and go lights on (solid, no blinking). The printer prints everything I have send to it, even test pages. By following the instructions on this page, I did a hard reset by putting off the printer, unplug the power cable, leaving unplugged for about 60 seconds, then in him plugging back in and turning it back on. Same thing: makes noise for a minute or two, then three strong lights.

  The printer is on a wired LAN, and I tried printing from two different computers on the network. I tried not to do a direct USB connection yet because this seems irrelevant to the question. The network (10.10.10.x) page shows the status of the printer such as "Printer Error".

  FWIW, he showed the same error last week, but a hard reset fixed it on the first try. This time, it does not.

  EDIT: If it helps, the date of the firmware is 20120814. I tried to update to 20150114 via the update utility, but he says that he can not find a serial p1600 printer is installed.

  EDIT 2: the printer will not even turn on. Tried a few different outlets, power strip directly into the wall vs - nothing. I think he's dead. Based on my experience with HP printers, I'm not surprised.

  Hey @dselzle,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that you are having problems with turn your Laserjet P1606dn. I can help you with that.

  To start, you will want to make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once's done it, this document will help you with your power problems.

  If you are able to turn on the printer, then that's fine. If it doesn't always turn the printer will need to be repaired. You can contact HP by clicking on this link by clicking on the form below.

  If this resolves your problems so please let other users know by clicking on accept as Solution next to this post.

  I hope this helps and I hope you have a nice day!

• P laserjet P1606dn: fake windows 10 printer error

  I have a HP Laserjet P1606DN installed and works. I installed windows 10 April 2, and every time I print something
  I get the following error notification
  "PRINTING ON HP LASERJET - PRINTER ERROR COULD NOT PRINT (REPORT NAME). Pages printing in any case without any problem.

  Can someone tell me how to get rid of this error?
  I have an HP office jet pro 8600 - another printer and it prints correctly without error.

  Thanks in advance.

  I solved the problem.

  I have LAN in my house. My HP P1606dn is a NETWORK ETHERNET printer.  I went into the PORTS on the printer and CHANGED my PORT for the TCP/IP connection.

  THIS WORKS.

• Print duplex on HP LaserJet P1606dn

  Why my HP LaserJet P1606dn provides only duplex printing for Web sites, but not for PDF or Word documents? The 'duplex' box shows that in the print menu when you print a Web site, but not when you print a PDF or Word document. (Why the print menus does not seek him still print a PDF/Word-doc vs site?)

  Problem solved: If a Word or PDF document printing, we have chosen "Layout" in the "Copies & Pages" menu in the print menu, then double-sided printing. (When you print a web page, simply check the box for print double-sided, right next to the box where you choose the number of copies.)

• HP laserjet p1606dn professional prints same document over and over

  Hello

  I have a problem printing to my hp laserjet p1606dn professional

  My printer print the same document over and over again.

  I use a hp Workstation xw4600 with Windows 7 64-bit OS.

  I upgraded the firmware and driver from the HP support site.

  #2 solution worked.

  I deleted the printer on the network, demolished port allocation.  I then added the print device, use the locally available printer driver, do not use the current driver.  Tested ok.  Works fine now.

  But it is good to know the two-way functionality. I will definitely keep in mind for the future.

• LaserJet P1606dn: does not print the background of the page number of manual

  I use the HP Laserjet P1606dn printer.  I am trying to print the user's Guide the HP for a new printer HP Officejet Pro 8620.     The manual is in PDF format.   When you view a page of the manual on the computer screen, the page number appears at the bottom of the screen.  Unfortunately, when printing the printer manual HP Laserjet P1606dn, the page number is not printing.  I tried to use the SHRINK TO FIT to the Laserjet function, but that does not print the page number.

  Any advice on how to print the page number would be welcome.   Aaron

  Thank YOU FOR YOUR QUICK RESPONSE!   PROBLEM HAS BEEN RESOLVED.  I TRIED TO PRINT THE GUIDE THE USER DIRECTLY FROM THE WEB SITE THAT DID PRINT NOT PAGE NUMBER.    I DOWNLOADED THE MANUAL IN THE MEMORY OF THE COMPUTER AND THEN PRINTED THE GUIDE FROM THE DOWNLOADED FILE.   THE PAGE NUMBER DID PRINT WHEN YOU PRINT FROM THE DOWNLOADED FILE.    WHY IT WORKED, I DON'T KNOW, BUT CELA WORKED.

  THANKS AGAIN FOR YOUR KIND INPUT1 BEST, AARON

• LaserJet P1606dn pick roller...

  The roller on my Laserjet p1606dn collection is a bit dirty and sometimes takes 2 "catches" the paper. The illustration in the guide of the user of this printer is quite different from that of the printer itself and is of no use because I have no basis for comparison. So, I can't release the roll so that I could clean it up.  The printer is still under warranty, I called HP tech and they were of no use, because he sought simply to the same user guide that I was... something releasing 2 white pills. I don't see any white label anywhere. There are 2 black tabs or something, but they are both firmly attached to the body somehow printer. Am I missing something here? I can never remember any of my other printers HP being this difficult.

  Never mind... I fixed the problem myself. Thanks anyway

• I have a LaserJet P1606dn - all of a sudden, I can't use the automatic on both sides print - Please help!

  I have a LaserJet P1606dn - all of a sudden, I can't use the automatic on both sides print - Please help!

  Hello

  Make sure that the automatic duplex printing option is selected:

  Enter the control panel > printers

  Right click on the printer icon, and then click Properties (printer properties for Windows7).

  Click the Device Configuration tab.

  Make sure that the option allow automatic duplex printing is checked.

  If there is no change, try to uncheck the print manual duplex option below, then check any change.

  The terms may be a little different because my OS is not in English.

  The front part / duplex must be placed at the bottom left part of the device Configuration dialog box.

  Please let me know of any changes,

  Shlomi

• HP Laserjet P1606dn: Printer offline

  Everytime I go to print, or the printer will automatically print letters nonsense at the top of each page (printer continues to fuel the continuous pages unless I have stop) OR it will say it is disconnected. Recently, my husband removed the printer in system preferences to start a clean slate. For some reason, now, the printer cannot yet be read to add in the preferences system (printers). All solutions? Thank you!

  Hi @RAKLER,

  Welcome to the HP Forums!

  I read your post that your HP Laserjet P1606dn printer keeps going offline. I'm happy to help you!

  Please, try the procedure described in this guide, "printer offline" or "printer not responding" Message (OS X)and let me know the results!

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope hear from you soon!

• Configuration problem?

  I'm new to Labview. I can't connect with 3458A. It works with 34401. I use a USB/GPIB from Agilent 82357 B interface. I have a VEE program that works with the 3458A. I think I have a driver or configuration problem. I am at a total loss, any help would be appreciated.

  I got it to work with the correct command. Thanks for your help. I have much better understand how this works now.

• HP LaserJet 200 M276nw: Configuration of the network for HP LaserJet 200 color MFP M276nw

  Can the M276nw of 200 HP LaserJet can be configured to scan to a network without initial setup of a PC folder? Without having first to connect the unit to a computer first.

  We run a virtual environment and the printer will need to scan to a folder configured network and this should be done through the device. Of course, file permisisons will be completed before. I think I saw a manual where the Embeded webserver had this configuration, but would have to make sure, before committing to the purchase. Thanks in advance.

  We gladly invite you.

  Yes, the printer supports the SMB Protocol indeed.

• two drivers of PXI chassis with Configuration problem

  Hello

  I have two PXI chassis. One is PXI 1033 and works perfectly with the NI PXI-5404, 5105, 6509, 1409, installed 8336. The other is 1036 PXI with the PXI-5404 NI, 8366 installed. When I was trying wreath connect, as master 1033, 1036 as slave, I found several problems.

  1. in the Measurement & Automation Explorer, does not have my good guys in 1033. Instead, there is a sign of the Red Cross in bottom right with 6509, 5105, 5404.

  2. I can't find an another 5404 of the 1036. In fact, I can't find 1036 in MAX.

  Update BIOS. My PXI system is already identified under the name 'NOR PXI - 1033 Embedded MXI Express' and Chassis1 is identified as 'NOR PXI 1033'.

  So I made several tests as below:

  1. unscrew the 5404 1036 slave. MAX can configure 2 1036 chassis. Ok. But when I reconnect 5404 in 1036, same result happened as stated above.

  2 uninstall the driver of 5404, so the 5404 in 1033 does not either now. And then reboot again, same result happens again. Cannot detect the 1033 chassis. Other vouchers in 1036 don't work either.

  Please, any suggestion is highly appreciated.

  Sincerely,

  Bin

  Hi Ben,

  This happens sometimes with MXI-Express:

  Error code 12 with MXI-Express

  http://forums.NI.com/T5/PXI/two-PXI-chassis-connection-with-configuration-problem/m-p/1475876#M9033

  In general, you can read this error 12 means on Device Manager:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  If it was a problem of bandwidth, PCI or PXI side, you could pull a few cards to see if that alleviates the problem, or that the link from Microsoft over the States, you can disable the driver for other cards.

• environment of server terminal server HP laserjet p1606dn

  Is it possible to use a hp laserjet p1606dn in environment terminal server?

  Page 10 of the Manual does not say explicitly that it supports environments Server terminal server (the note was the only reference I could find for server environments terminal server).  This leads me to believe that it is not guaranteed to work without causing performance or errors occur.

  However, you could try posting in the business community.  Consumer forums is more for use domestic and I suspect most home users need to print in an environment terminal server.  They may be able to answer the question more easily or be able to recommend a printer that works in an environment terminal server.