HP LaserJet P2015dn: Problem HP LaserJet P2015dn Driver

Similar Questions

• HP LaserJet 1100 printer: HP LaserJet 1100 driver needed for laptop with Windows 7 Starter operating system

  Hi - I can't find the HP LaserJet 1100 driver for a netbook Samsung Win 7 Starter OS. All that said it should be in the distribution of Win 7, but it is not in the package of Win 7 Starter someone can tell me where I can get this driver?

  TIA,

  Mitch

  Hi Mitch8,

  Have you tried to install drivers for your printer InOs. Here is the screenshot how to add a printer.

  1. Go to the device and printer, click Add a printer-> select Add a local printer, and then click Next.

  

  2. Select the existing port of list (printer port virtual USB or serial port depending on how the printer is

  connected to the Pc and click Next.

  

  3. in the production list, choose HP and on the list of the printers section search HP LaserJet 1100 (MS) in the list and click Next
  to install the driver of InOS.

  Note: If not HP LaserJet 1100 (MS), and then click Windows update and allow while it updates the list of readers
  then look for HP LaserJet 1100 and click next to install the drivers

  Note: you must have Internet access to download drivers INOS

  

  I hope this helps you!
   
  Make it easier for others to find solutions, if my post has solved your problem, please mark as "accepted solution".
   
  +++ Say thank you by clicking on the star of congratulations in the post.
   
  Although I am an employee of HP, I speak for myself and not for HP.

• trying to UN-ininstall print driver error message: could not remove the HP LaserJet 1020 driver. The specified printer driver is currently in use. __Failed to remove the hplj1020.inf package. Access is denied.

  I have a new win 7 and have a lot of trouble installing an HP laserjet printer.

  When you try to remove the drivers under properties of the print server, I get the following message:

  "Cannot remove the HP LaserJet 1020 driver. The specified printer driver is currently in use.
  Impossible to remove the hplj1020.inf package. Access is denied. »

  someone knows what's the problem?  the prnter is not yet connected.  Must not be in use.  The problem I had was that the stuff sent to the printer seems to sit and take 15 ins to print a test page.

  How can I remove the drivers?

  Stop the print spooler service, and then start the print spooler service.  Now, delete the print driver and packaging. Alan Morris Windows printing team seek here Microsoft Knowledge Base: http://support.microsoft.com/search/Default.aspx?adv=1

• Satellite M30 - problem with the graphics driver and Quicktime movies

  I just installed a 40 GB to 80 GB hard drive and installed all the drivers in the correct order, as indicated by toshiba. Everything works well except the used for Quicktime .mov files. All I get is audio but no image - other than a colorful blur screen!

  I think I've isolated the problem to the graphics driver. Whenever I turned off / uninstall the driver dedicated for the graphics card FX 5200 GP (version 4.6.44) Quicktime files work fine. It is only when I installed the dedicated driver problems occur!

  Can someone tell me why this might be?

  Hello

  Do you use the graphics driver from the Toshiba driver page?

  Try to use the QuickTime Alternative 1.77. In this version the codex QuickTime has been updated.
  This version uses these features:

  -Media Player Classic [version 6.4.9.0 + SVN build 2006-12-24]
  -Codecs QuickTime [version 7.1.3.100]
  -QuickTime plugin for Internet Explorer
  -QuickTime plugin for Opera/Mozilla/Netscape
  -Extra plugins for QuickTime
  -QuickTime DirectShow parser
  -Wrapper DirectShow QuickTime decoder
  -CoreAVC 0.0.0.4
  -CoreAAC 1.2.0.575

  check it out...

• Problem with new HARD drive and Qosmio Player installation

  Hi all
  I hope someone can help, I had my Qosmio for 2 1/2 years now and recently had a problem with the hard drive. I decided to replace the hard drive, because it was the fastest solution. The problem I have now is that I can't receive TV on media center. I tried to install qosmio player at the disk to see if it made any difference, but when I run the provided recovery disc software tells me that there is not enough disk space! The laptop came with a 60G hard drive and the new HARD drive manufactured by the same manufacturer is a 150 GB, can someone help me out with this would be appreciated.

  Thank you
  ED.

  Have you tried to install Qosmioplayer initially, then on operating system? If I remember well, on this first portable Qosmio, it was very important to install Qosmioplayer initially.

• Problems of bad video driver Y470P for Windows RDP

  Hello world

  I'm having a problem with the video driver ATI/Intel when remoting into my home computer. I use the windows remote RDP Protocol on my work computer and whenever I try to use java or flash, I get an error causing the my browser (this happens with Chrome, Firefox and IE).

  If I uninstall my video drivers and the distance with the default Microsoft video driver, everything seems to work properly.

  Anyone has the same issue or have solutions?

  Thank you!

  You can turn off the graphics card in Device Manager, and if you switch GPU you can do power off.

  Best regards

  Tanuj

• I have registry problems. My games drive no longer works: he continues to show that there is a problem with fmod.dll

  I have registry problems. My games drive no longer works: he continues to show that there is a problem with fmod.dll, then when I fixed an error occurred -FSOUND-Sample_Load@16.  Also, ITunes says that there is a registry problem. We have inadvertantly deleted something or can other software recently installed it cause it was working fine until we installed a vivtar camera.

  Can provide you advice on how I can overcome this problem.

  Concerning

  original title: update windows

  Hello

  Method 1:

  I suggest you uninstall all third-party software and then try to perform the system restore.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Method 2:

  I also suggest to perform a system analysis File Checker.

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Post back with the results for further directions.

• Problems when installing a driver for my scanner

  Hello!

  I have serious problems when you try to install a driver for my scanner - Epson Perfection V700 - on my desk. It was installed earlier, but after a reinstall of XP Pro (SP3), it seems impossible to install it again. Whenever I get an errormessage: "not able to copy the files. Make sure that the target disk is not dead. »

  I tried to install the driver when I had turned off almost all the programs, in "auto-start" - same problem. I run a scan of the disc and also done a defrag - same problem. I have installed many programs on my desktop, so until after I encountered the problem with the driver for the scanner and it was no problem to install the driver on my laptop (also XP Pro).

  I ' v chatted with the support of Epson in England and they have suggested that the problem was in my PC. Because I'm taking care of family archives, I am more eager to get the scanner working again. Any advice/suggestions how to deal with the situation are so much appreciated.

  Hello

  Good to know that your problem is resolved and thanks for letting know us.

  ·        If the scanner works fine then, why do you want to update the driver?

  You may need to consult the manufacturer of the scanner (Epson) to check if they have released an update of the driver for your scanner. To update the drivers on which are present on the system, follow the steps mentioned in the article below.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• My computer Toshiba Satellite keeps the 'blue screen' and that is to say that it is caused by "a problem with a USB driver. How can I fix it?

  Resolve a problem with a USB driver

  You have received this message because your universal serial (USB) bus driver caused a stop error, also known as a blue screen error. This error means that the computer has stopped abruptly to protect against potential corruption of data or loss.

  What is a driver?

  A driver is software that allows your computer to communicate with hardware or devices. Without drivers, the hardware you connect to your computer (for example, a video card or a webcam) may not work properly.

  The recommended steps that follows can help to eliminate this problem, or at least reduce its frequency. Try them in the order listed. If a step cannot solve or reduce the problem, then move on to the next.

  Steps to fix this problem

  1. Adjust your computer's power settings

     The following power settings may help reduce the frequency of this problem.

     1. Turn off the USB selective suspend setting:

        1. Click on the Start button .

        2. In the search box, type power options, and then press ENTER.

        3. Find the plan selected, and then click change plan settings.

        4. Click change advanced power settings.

        5. Double-click the USB settings , and then double-click on USB selective suspend setting.

        6. Make sure that the USB selective suspend setting is disabled. If it is enabled, click it and select disabledand then click OK.

     2. Disable power saving mode (computer portable computers only):

        1. Click on the Start button .

        2. In the search field, type power options, and then press ENTER.

        3. Under Preferred Plans, ensure that High Performance is selected, and then close the window.

  2. Look for an update of the BIOS for your computer system

     Several computer manufacturers whose computers have this problem published BIOS updates to fix this known issue. Contact your computer manufacturer to see if a BIOS update is available for your computer model.

     What is the BIOS?

     The basic input/output system (BIOS) is software built into a computer that runs when the computer is turned on. Among other things, this software starts the operating system, and supports the transfer of information between hardware devices (such as the keyboard and the monitor).

     How can I find the manufacturer of my computer?

     Click on the Start button , type msinfo32 in the start search box and press ENTER. The manufacturer of your computer is listed as the manufacturer of the system in the right pane of the system information window.

     Click here to go online to see the contact information for most of the computer manufacturers

  3. Download and install the latest updates and drivers for your computer

  It's a good idea to periodically check the updates of driver for your computer, especially if you added new hardware recently, such as a USB hub or other USB device.

  What is a USB hub?

  A USB hub is a device with multiple (USB) universal serial bus ports. USB ports are narrow and rectangular connection points to connect USB devices to your computer. A USB hub is used an Extender of port or port replicator, providing more USB ports to run from a USB connection on your computer. USB hubs can be external devices that connect to a USB port, or they can be internal devices built into your computer.

  To check for driver updates:

  1. Use Windows Update to find and install updates:

     1. Go online to Windows Update

     2. Click the check for updates in the left pane, and then click view available updates.

        What happens if I see any updates available?

        • If you see you receive updates: managed by your system administrator, you can try clicking on the link to check online for updates from Microsoft Update or Search online for updates from Windows Update, but you should maybe contact your system administrator to get the desired updates.

        • If you do not see the message above and no update is available in Windows Update after clicking on the link check the updates in the left pane, then the available updates have already been installed.

     3. Select the driver for your device updates and more updates to install.

        Note
        We recommend that you install all Important updates and recommended. These updates improve the security and stability of your computer.

     4. Click on install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. If you recently added a new hardware device on your computer, go online to the manufacturer's Web site to see if there is an update to the driver.

  3. If you recently added a new program on your computer, go online to the manufacturer's Web site to see if an update is available.

  Steps to work around this problem

  Warning
  These measures are intended to solve a specific problem, but could do so by temporarily disabling or removing some features on your computer.

  1. Try to remove newly added USB devices

     If this issue occurs after adding a USB hub or other USB device, consider removing to see if the problem goes away. If this resolves the problem, contact the manufacturer of the device for the updates or other recommendations.

  2. Do not disconnect USB devices while the computer is to stop or go to sleep

  This problem is known to occur when USB devices are disconnected when the computer is trying to stop or switch mode to 'sleep'. This is common with cell phones, especially those with a docking station, as docking station can act as a USB hub. The frequency of this problem could be reduced by allowing your computer to completely close or completely in sleep mode before detached from its docking station or unplug it or the docking station USB devices.

  If you know which USB device is causing the problem

  It may be possible to prevent the Blue error screen by choosing the option remove the device safely in the Notification area, before putting your computer into sleep or Hibernate mode.

  1. In the system tray, click the icon to remove the device , select the USB device that you think that the origin of the problem and then click OK.

  2. Do not physically remove the USB device.

  3. Perform the action which resulted in the Blue error screen, so that was taken the functioning of your computer after the mode standby, hibernation, or, in the case of laptops, close the laptop computer or place it in a docking station.

     1. If the Blue error screen persists, it is likely that the problem is with another USB device. Try this procedure using other USB devices until you find that at the origin of the problem.

• If the Blue error screen disappeared, you have probably identified the device causing the problem. Contact the manufacturer of the device for more information on how to solve this problem, or use the option to remove the device safely to work around him.

Note
Depending on the manufacturer and model, some USB devices will become available automatically when you resume using your computer. Others will require that first disconnect you physically and then plug back in front, they will be recognized by the computer. Check the system tray to see if the USB device that you removed safely become available when you started to use your computer again. If she did not become available automatically, then physically unplug it and then plug it in again.

This is the screen it gives me. Help, please! If problem fixed, will BE AWARDED!

Hi ChayceSteffiare,

For instructions on solving problems with USB devices, see the following article:

Tips for solving problems of USB devices

To fix blue screen errors, see the following article:

Pick up the pieces after a computer crash

See also:

Optimize Windows Vista for better performance

Ways to improve your computer's performance

• Drive hard internal not found to fix this problem, try reinstalling the drive

  So I get the error message: internal hard drive not found to fix this problem try reinstalling the drive

  Once I got the error, I removed my 1 TB HARD drive and replaced by a 525 GB SSD and I still get the error. After testing the original 1 TD drive HARD, has nothing wrong with him, so it seems to be something wrong with the computer itself.

  I ran the PSA test and it does not detect any problems with the hard drive and no other errors.

  What could be?

  Edit: I have the Dell XPS 15 9530

  The fixed. The BIOS has been updated with virtualization, so we turned off and also removed the SSD of 32 GB.

• "A problem with the display driver.

  Recently, I get an error message whenever I open Photoshop CS4. It reads as follows.

  "As Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  "GPU improvements can be enabled in the Performance preferences panel."

  I checked the graphics cards in Device Manager, and when I tried to update the software, it told me that I was aware.

  • OS: Vista Edition Home Premium
  • Dell Inspiron 1520
  • Display driver: NVIDIA GeForce 8400 M GS

  Sincerely, Danny

  Hello

  Try to update your display manually driver and do not use the analysis of the drivers on the manufacturer's website either.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive.

  * Original title: hard drive

  I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?

  Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader.  If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key .  Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader.  If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.

  If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install.  If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.

• Problem to install the driver for the AMDA00 interface

  I have problem to install the driver for the interface of AMDA00 under the system of the device. I am using ASUS motherboard H87 - more.

  When I update the driver it is a prompt window found driver software, but has encountered an error trying to install it, 'access denied '.

  Get the drivers on the site of Asus, specific support to your me board

• Problems to install the driver for Canon lasershot 2900B printer, to get the message "installing the driver interrupted."

  I have problems to install the driver for Canon lasershot 2900 B printer. I have windows 7 64-bit (SP1) installed in my PC. I get the message "driver installation interrupted. I had downloaded and installed the latest driver and I get the same result. I was told it might be a problem with OS. I have had no problems to install the drivers for the scanner or hardware drivers. Thanks in advance.

  Original title: printer drivers

  Thanks for the reply of Ravi Shankar. My PC is a Dell Inspiron 530. There is no specific error message except for the one I provided. There is a solution to this problem. It seems that if the print spooler is disabled (services and storage via the computer management), the installation of printer driver is interrupted. I manually activated the spooler on automatic printing and the printer driver has been installed immediately.

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• having problems to install a driver

  Hi I have a windows netbook eepc 7, I have problems to install a driver can help you please? XX

  Your only other option is to go to a computer to work with a Player DVD copy the contents of the disc to a folder and copy this folder on a USB and install from it on the target computer.