SystemUpdate updates incompatible with the Support Site

Similar Questions

• Windows could not transfer files. An address incompatible with the requested protocol was used.

  Microsoft. It's so hard to get where you want to go on the site.

  I wish they still had the cat where you enter just a few things, and for free, it instantly opens a window of instant messaging to chat with microsoft.

  Well, I have a dongle bt USB and when I right click and click send a file, it gives an error

  Windows could not transfer files. An address incompatible with the requested protocol was used.

  With windows xp, I plug it and he can move 2 drivers, "microsoft bluetooth enumerator" and "generic bluetooth radio".

  in windows 7, it installs the same 2 drivers

  I pair the device from the phone and it didn't work. while I was looking for the computer and it does not even, but file transfer

  It works totally fine XP and with the same drivers! just different os versions.

  I went to Device Manager, click on set to update driver and he know that later is installed

  BTW, it's a generic radio bt, and it was $10 do9ller micro dongle.

  However, there is no brand name.

  but it works under windows xp? but not 7?

  Windows xp and windows 7 are duel boot, so it's the same material, b/c windows xp and windows 7 is on the same hardware

  If I use the VM vmware, I can transfer files

  Microsoft sucks... I mean except xp. He is old, but it's the best version of windows there, Runnin' on minimum 16 MB of ram and 400 mhz cpu... I luv xp, no more errors

  Hello

  Check if the same device works fine on another computer with Windows 7 installed. Also, try to send files from the phone to the PC and check what is happening.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  You can try the steps below and check if that helps get the Bluetooth dongle to work.

  (a) click Start and then click Run.

  (b) type regedit and then click OK.

  (c) locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {e0cbf06c-cd8b-4647-bb8a-263b43f0f974}

  (d) right click on the folder, click on delete.

  (e) exit and restart

  Now, try to find your device and send the file. It should work.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Binary translation is incompatible with the long mode on this platform. Windows 7, processor intel core i5

  I install VMware Workstation 12.1.1 Player for Windows 64-bit operating systems on Lenovo intel core i5 Windows 7.

  I have a copy of VM for HP Quality Center with the VirXPSP3.vmx file and the environment.

  When I try to open the Workstation Player vmx file:

  (1) I got prompt that machine virtual seem to be an option to take possession and use

  2) after taking possession, I try to play the virtual machine, I got a prompt with "binary translation is incompatible with the long mode on this platform. Long mod will be disabled in the virtual environment and application requiring long mode does not work correctly as well. See http://vmware.com/info?id=152 for more details. »

  Link is on this page: system required to install an operating system 64-bit on a 32-bit host (1003945) client. VMware KB

  Host is definitely 64 so I'm puzzled with this is the case.

  (3) next step/guest is: "this virtual machine may have been moved or copied. I clicked on the button "I copied it".

  (4) the following message:

  Fatal error VMware Player: (mks)

  Exception 0xc0000005 (access violation) occurred.

  Log file is attached.

  Line 476 in the log file is:

  The following features of VT - x are necessary for the support of VT - x in VMware Player; However, these features are not available on this server:

  2016 06-07 T 13: 51:34.466 - 07:00 | VMX | I125: hostCpuFeatures = 0x217d

  In one of the previous installation, I did virtual Intel technology enabled in the BIOS after one of the responses of your forum. It has not removed the error.

  Just to clarify whenever I have uninstall I'm your site troubleshooting steps:

  (1) Uninstall using Add/Remove program of the program and features

  (2) run the installer with clean / change

  I do above steps as an administrator and restart after each step.

  On top I have delete the following folders:

  C:\Program Files (x 86) folder \Common Files\VMware

  File C:\ProgramData\VMware

  File C:\Users\Ivana\AppData\Local\VMware

  Files C:\Users\Ivana\AppData\Local\CrashDumps\vmware-vmx.exe.*.dmp

  File C:\Users\Ivana\AppData\Local\Temp\vmware-Ivana

  File C:\Users\Ivana\AppData\Roaming\VMware

  And delete the folder with the Virtual Machine for HP Quality Center.

  Do you know how can I fix a fatal error (mks)?

  The same installation works fine on HP with Windows 7, i.e. copy of VM for HP Quality Center is ok.

  Thanks in advance for your help.

  Usually, this is caused by outdated or incompatible graphics drivers on your host.  I expect that the latest drivers for your integrated Intel HD Graphics 4000 would be probably already delivered through Windows Update, however.  Could be interesting to see if there is an optional update in your Windows Update list to get a new graphics driver.

  Otherwise, you can try the problem by disabling 3D graphic acceleration: from the VM menu, select settings..., and then in the list of material , choose display.  Clear (uncheck) the box 3D graphic acceleration .

  I hope this helps!

  --

  Darius

• The Y550 I want to buy is not on the support site

  I've been looking at laptops for the coming school year, and I really think I want to get a Y550. Newegg.com has a model decently price with very good specifications and a dedicated GPU, I need because I specialize in programming video games at my school. However, after searching the model number on the support site, I find that this model is as the redhead daughter-in-law Lenovo does not want to recognize. The model number is BU 41865; you can find the page of the product here. I just want to know if there will eventually be a support for this model page, because if there is not, or I can't hear it's going to be a deal breaker. My last laptop is a Dell, but after the horrible experience I had with them I'll never buy one of their products again. I would like to find a competent computer for once manufacturer!

  If you are looking for drivers, you can find them here.

  If this is not the case, can you please explain what kind of support are you looking / searching for?

• Could not open the page to update windows with the error 80072efe

  Could not open the page to update windows with the error 80072efe

  0x80072EFE - ERROR_INTERNET_CONNECTION_ABORTED - the connection with the server has been terminated.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  TaurArian [MVP] 2005-2010 - Update Services

• an address incompatible with the requested protocol was used

  After I have upgrade of windows 7 starter edition to windows 7 Home Edition premium, I can't do a bluetooth file transfer and the following message appears: an address incompatible with the requested protocol was used.

  Hello
  How do you transfer the file?

  Method 1:
  Try to perform the audit and the clean boot if this can help,
  Here is the link: http://support.microsoft.com/kb/929135
  Note: When you're done to diagnose, follow step 7 in the article to start the normal start

  Method 2:
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link.
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
   
  You can try the steps and check.
  (a) click Start and then click Run.
  (b) type regedit and then click OK.
  (c) locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {e0cbf06c-cd8b-4647-bb8a-263b43f0f974}
  (d) right click on the folder, click on delete.
  (e) exit and restart
   
  Method 3:
  Change settings for a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

• 3000 N200 DVD writer - can't find much info on the support site

  Hello

  I looked on the support site for my laptop see more info on my DVD burner, specifically:

  (1) how to check if the writer firmware is up to date

  (2) what accelerates, he worked for various media

  (3) is double layer for example DVD + R DL writing supported?

  The reason why I ask, is that I was not able to burn DL discs.

  See you soon

  OK thanks a lot - I accept that is not compatible with DL for writing.

• Inspiron 5749: BIOS update fails with the error 'Dell id does not match ".

  Hello

  I'm trying to update the BIOS of the Laptop Inspiron 5749. I downloaded the update file 3443A 07. EXE from Dell support website, where the update is supposed to be compatible with my system:

  -Dell Inspiron 3443/3543/5749 system BIOS;

  -Version A07.

  -Pull out the date 18 November 2015.

  I tried to install the update by using the utility to update the BIOS available in the start menu (after pressing F12). The update failed with the error message "Dell id does not match" or similar.

  Running the update of the session Windows don't seem to have any effect either.

  It seems that the update is only compatible with Inspiron 3443.

  Where can I get the update of the correct BIOS for my laptop? Any help is appreciated.

  The problem has been resolved by a motherboard replacement. Thank you.

• Be careful with the support of Palm

  I had a Palm T3 and send it for repair to Palm support, they charge me $ 230 can$ for repair or Exchange with a Palm T3 renovated! It takes a month before receiving a palm Tungsten E2 (incompatible with the T3 cradle). The E2 is half the quality of my old ((E2: 32 mb, 200 mhz, écran plus petit etc.) T3 and T3 64 MB, 400 mhz, bigger screen, voice memo etc.)) I want to just send the E2 return and refund but Palm support will give me no refund!  So I have an palm E2 I want and also I can't use it because I do not have the cables of synchronization and load, anyway I won't son because I don't pay for a Palm E2 and I don't want the Palm E2!

  Also the new E2 Palm he sold $ 229 on the Palm Canada store! The same price of my repair order...

  Palm stupid me with that and I'm really disappointed!

  So everyone be careful with palm support, they could do th same for you!

  Today, I speak with a corporate customer relationship technician of Palm and is 10/10! He was really polite and for the first time, I felt like someone listen to me. I talk with a person who knows his product (he don't try to bull * beep * me and acknowledges that the Palm E2 is not my T3) it gives satisfaction deserve a customer of a company of big and responsible as Palm!

  Corporate customer relationship of palm understand that needs of their clients and they treat me with respect. We finnally came to an agreement and I am very satisfied.

  So remember if you can not have a solution with the help of the Palm, continue to fight against your point and someone somewhere will be heard you and listen to your problem

  Corporate customer yet thanks for t Palm for listening!

  And thanks to the forum too, for help and support...

  Message relates to: Tungsten T3

• BitComet video downloader is incompatible with the 4.05 b combustion chamber

  bitcomet installed for the home but am extensions it doestnt is showing bitcomet video downloader is incompatible with the 4.05 b combustion chamber

  You will need to contact bitcomet on this subject, it is for them to make their compatible extension.

  You could install the Add-on Compatibility Reporter extension. This will automatically allow all extensions, which allows you to test to see if those that are incompatible with working again. If they don't work you can turn them off again.

• HP power supply pinout incompatible with the standard?

  My machine is a P7-1370.
  
  While researching PSU's, I found this statement to http://www.smps.us/power-connectors.html:
  
  "Compaq and HP also used incompatible systems. As a general rule, if you have a brand PC,.
  you suspect that it may be incompatible with the standard of the industry. »
  
  But in this forum I read about the people, replacing the PSU in HP machines with Corsair etc.
  
  Is there any incompatibility in the HP pinout?

  Hello

  The new class of consumers HP PCs of my standard ATX power supply to use observation provides. Some of the class business PCS have been known to use propriety feeding.  You can find some of the old HP PC using a connector ATX 20.

  It takes time for the standards to shake.  While using a power supply ATX standard can save on costs, that it could not meet the requirements for a particular need, hence the need for a special model. Sequencing of its power for devices is a case I've seen in the past to power specialized.  Another situation might be a compact cabinet where a typical diet would not fit.

  I saw the power supplies that are interchangeable between Dell and HP.

• Engines: A version of the library is incompatible with the version of XNode

  I have SP1 2013 Labview and 2013 NXT Module installed f1.  I'm taking a class on Robotics where we use the Lego Mindstorms NXT module.  I have code that works very well in school, but when I load it on my laptop I get the error message: engines: library version is incompatible with the version of XNode.

  My son has the Mindstorms and I can't use the laboratory at the school (except for class) because it is open only during my work hours.

  I installed on the same disks that the school uses (their academic licences provides for this).  What should I do to get this code works on my laptop?

  Please help - I have an assignment due.

  The polymorphic VI you have in the block diagram is the patch of f1, but the other I think you are talking about is the equivalent of the patch of f2. If I am not mistaken, the school could have installed the fix for f2 (it would still appear as NXT 2013).

  This is how the VI looks in two versions:

  

  If you drop the first and the second in the school lab in your mobile, you can try to install the patch f2 in your laptop. You can download it here:

  http://www.NI.com/download/LabVIEW-NXT-module-2013/4678/en/

• I tried to update my new S3 Galaxy and some updates succeeded with the exception with the error 800F020B code.

  What does the acronym for error 800F020B code?

  I tried to update my new S3 Galaxy and some updates succeeded with the exception of
  one with the error 800F020B code. It holds until the completion of the update. Help, please
  as I'm not in the computer. Thank you

  If the update is for your 3 contact your telephone service provider or Samsung Galaxy.

• With the support of IKEv2 VPN server configuration

  I'm putting my pc W7 as a VPN server with the support of IKEv2, but it escapes me, although I am not a novice.

  I read a lot of forums "directions for use", but no address really details.

  (1) for IKEv2, I need to install a certificate... I could not find a step by step guide.

  Everyone for help...?

  (2) how to set up the VPN server on my local LAN for testing to exclude router firewall etc... and connect my 920 lumia.

  Everyone for help...?

  Hello

  My apologies for the delay in response.

  For that matter on the VPN with IKEv2 Server Setup, you will need to post your request here on the TechNet forums.

• No access to a knowledge base on the Support site. Help, please.

  I get the following when I try to access any database knowledge, even when connected to the Support site.

  

  I had to re-application for access to CSI and after that things started working fine.