HP laserjet p2035

Similar Questions

• laserjet p2035 problem

  I have problem in hp laserjet p2035... his work on windows xp as a shared printer...

  his ip address is 192.168.1.21

  When itry to connect from another pc that runs on win7 64 bit, it gives me error that the driver was not found...

  In fact need a file called (inf), I'm stuck here a few days ago

  Please help me

  Hi, you will need to do the following.

  On the Windows 7 computer, click Start, and then click devices and printers.
  At the top, click on add a printer link.
  Then, select Add a local printer.
  Then click on create a new port and choose Local port from the list of options.
  Click next and in the name of the Port box, type the path to the shared printer on XP.
  It should be something like \\XPname \P2035

  Now choose the Laserjet P2035 driver in the list
  Windows 7 will load the driver and you will be able to print on the XP from Windows 7 machine

• LaserJet P2035: Problems with a LaserJet P2035

  I have two HP LaserJet P2035 and both will send jobs not from the paper tray.  They two fine prints from the manual feed tray 1.  When I close the manual feed tray 1 and try to use the paper in the paper tray, the paper light keeps blinking and will not clear. I have performed the update of the firmware on the two units that made no difference.  I would greatly appreciate any suggestions.  Thank you!!

  Thank you freginold.   I found the culprit.  I have slightly bent a metal cross bar support located under the paper tray upward toward the printer.  This bar triggers the lifting of the paper tray mechanism to lift the paper in place and of course, there was no contact. This solves the problem.

• LaserJet P2035 don't print PC programs

  I have already used aa laserjet 1022 but improved to laserjet P2035. I downloaded the drivers 2035 etc from the CD. The printer does not have any internal progrm on my PC print. It allows to print 3 sheets of diagnostics, so I guess that the driver has been installed correctly. I turned on the PC on and off like a yo yo, but nothing of what I have done will encourage the printer to print any of my installed programs - HELP!

  Martin Katz

  You set the default printer? Have you tried running this?
  HP Print doctor for help with many printing problems

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c02073861&JumpID=ex_r4155/HHO/IPG/ccdoc/trailhead_doc&lang=en

  I hope this helps.

• Error 'pilot not available' when connecting to my HP Laserjet P2035 on my Emachines laptop.

  Original title: ProgramProgramsCompatibilityApplicationApplications

  I have trouble with my Hp Laserjet P2035 with my computer emachines laptop, the error message is still this unavailable driver! I downloaded the supposed driver a few times everything to nothing does not. Please what can I do?

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=uk&prodTypeId=18972&prodSeriesId=3662025&prodNameId=3662026&swEnvOID=4132&swLang=8&mode=2&taskId=135&swItem=lj-76599-2

• HP LaserJet P2035: HP LaserJet P2035 not print color

  Printer stop suddenly printing in color:

  (1) check cartridges - they are good

  (2) checked the settings - they are good

  (3) as 'Printer properties'--> 'General'--> 'Features', the color is set to 'NO '.  This is not a modifiable setting.

  Rose troubleshooting and found goes into "Device Configuration" and change the "Installation Options".  My interface is NOT "Installation Options".

  Please notify.  Any help is very appreciated.

  Hello, you are sure to have the correct model number? The HP P2035 is a black and white printer, so it does not print in color.

  But, if you have a color printer and it is only printing in black and white, then I would say replace the pcl driver 5. I've seen similar with color printers problems while people were using the pcl driver 6.

  I hope this helps...

• LaserJet P2035: P2035 feels ghostly second image under original on correspondence cards

  I try to print multiple cpoies of the same note on several cards of matching size 8.5 x 5.5 inches.  Correspondence cards are a thicker than normal paper.  First card itself, but like the second and more than fingerprints cards are printed, it appears an id low reprint the text below the original text.  The repeated image is sometimes quite heavy to read almost.

  Low repeated text starts about 2.5 inches below the original.

  I tried to set the paper weight, cleaning the printer, print the page cleaning several times and in frustration, replacement of the cartridge.  Nothing changes.  Test pages are impeccable.

  If I wait 5 minutes between the copies and print a copy each time, it will print ok.  It is a pain when the customer wants to 50 copies.

  Anyone who think that a process of trying?

  Thanks Dave.  The idea of the fuser unit do not receive the card stock pretty hot was the clue.

  The heavier paper setting is only available with the top tray (1).   We were still using the #2 plateau because that's the way it has been done before.  The setting of the average weight was heavier for this bin.

  Again, I created a custom configuration with the actual size of the map, not only close to the available selections, the heavier paper setting and the top shelf.  It worked to clear up the ghost repeat printing and as a bonus, several copies can be printed instead of one at a time.

  After about 3 copies, there is just the ghost atrace.  I'll try a 600 resolution setting then maybe it won't be so much toner to try to merge the heavy card stock.  I wish there was a way to set a delay between each copy to allow fuser back upwards to maximum temperature for the next card.

  Once again, thank you for the response and consciousness.

  Tim

• LaserJet P2035: Feeling strange problem - that is the faulty part?

  Hello

  I can't print anything properly, even not test/configuration page. And I don't know why this is happening.

  can someone tell me what defective part can be (laser, fusion,...)?

  Please see Sun. :

  

  Another example:

  

  Thank you very much

  Miguel

  Resolved:

  Bought a Canon printer.

• envelopes will not feed Laserjet P2035

  I used a program called Stamps.com, which has worked well in the past, to print envelopes which sender, address of the recipient and a printed stamp.  But today, when we put an envelope in the manual feed tray, envelope do not get sucked into the printer as it used to do. Instead, we get our information printed on a page of format letter from tray 2.  Any ideas on how to solve this problem?

  Please skip this Question - problem solved. It was user error - my wife forgot centering guides in the status bar, manual power leaving spread format letter, then she puts the envelope to the extreme left and roll, being in the Center, could not enter the envelope. By narrowing the two grey tabs so that they fit on the right against the left and right of the envelope, the envelope is centered and then the rubber roller can get a grip on the envelope.

• HP LaserJet P2035n: HP LaserJet P2035n is supported pcl5?

  HP LaserJet P2035n is pcl5 support? You can install HP LaserJet P2035 with pcl5 in windows 7, same hp laserjet 1320? (I'm sorry, I can't speak perfect English)

  According to the specifications of the LaserJet P2035n printer, the print language supported are:

  • Printer languages: Host Based, UPD (HP PCL5e)
  • Fonts/fonts: 45 TrueType fonts

  Perhaps implying that:

  • The default printer driver is likely to be a host-based driver.
  • The printer supports PCL5e
  • This support can be limited when compared to other printers PCL5, which usually have fonts 80 or more present in the printer.

• P2035, rdp and .pdf

  I have a LaserJet P2035 that prints symbols nonstop when a .pdf file is sent to her by a rdp session. I tried using EasyPrint, and it does not recognize the printer. I used the new drivers and older drivers on the terminal server server, but nothing seems to solve this problem. I did the updates of the firmware on the printer, tried new cables and still get this problem. If anyone has had this problem and if yes, how do solve you this problem?

  P2035 support only the PCL5, then you will not be able to print PDF files directly. You will need to send it via PCL5 driver.

  http://h20565.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?sp4ts.Oid=3662049 provides the drivers.

  And http://www8.hp.com/us/en/products/printers/product-detail.html?oid=3662038#! = form tab mentions that it supports PCL5 only

• Citrix

  My client connects to our program on a site hosted by Citrix.  The HP Laserjet P2035n printer does not print.  I can see the job of getting to the printer and outside Quebec, but nothing prints on the printer.

  After that a lot of time spent with the Citrix support team, they conclude that there's a new driver.  Here is their response:

  From your question, I would recommend reaching out to HP to find a compatible driver that will work in Citrix. Based on our documentation this printer was supported last on XA 5 32-bit.
  http://www.Citrix.com/ready/en/Hewlett-Packard/HP-LaserJet-P2035n-printer

  The question is - is there a driver uptodate more for the new version of citrix?

  Thank you

  John

  This link says:

  Citrix compatibility

  HP LaserJet P2035n printer is verified to be compatible with:

  Citrix XenApp product releases 5.0 32 bitXenDesktop

  4.0

  Hi John,.

  The HP Laserjet P2035 is not supported on Citrix, as you can find below:

  http://h20195.www2.HP.com/v2/GetPDF.aspx/4AA0-8465ENW.PDF

  You can try the driver for the UPD PCL5 and check if this can give you no results:

  http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?sp4ts.Oid=4157320&AC.admitted=1402072015163.876444892.199480143

  Shlomi

• Windows 8 HP LJ2030 Driver installation problem

  I have a HP Laserjet P2035 printer and a brand new Windows 8 computer.  The printer was purchased several years ago and has been used with a Windows XP box. When I joined the printer to the new computer via a port USB<->USB cable, it was not recognized. Manually, I downloaded the driver on the HP website and tried to install it several times without success. I finally found the log associated with the installation procedure.  The following are entered during my last attempt to install the driver by clicking on the app "ljP2035-gdi-pnp-win64 - in .exe:

  [11/08/2013 13:51:35:112] - LOG (1110): PRODUCTInst -.
  [11/08/2013 13:51:35:112] - LOG (1110): InitProperties - retrieve the accessories of the file "C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\properties.ini".
  [11/08/2013 13:51:35:112] - LOG (1110): the Installer version: 1.0.5.3
  [11/08/2013 13:51:35:127] - LOG (1110): - Language ID -
  [11/08/2013 13:51:35:127] - LOG (1110): language of the UI by default = 1033, 0 x 409
  [11/08/2013 13:51:35:127] - LOG (1110): language of the UI system default = 1033, 0 x 409
  [11/08/2013 13:51:35:127] - LOG (1110): user language = 1033 default ID, 0x409
  [11/08/2013 13:51:35:127] - LOG (1110): language = 1033 default system ID, 0x409
  [11/08/2013 13:51:35:127] - LOG (1110): ID of the language to use = 1033, 0 x 409
  [11/08/2013 13:51:35:127] - LOG (1110): Is64BitWindows()
  [11/08/2013 13:51:35:127] - LOG (1110): compiled as app 64 bit so must be on 64-bit Windows.
  [11/08/2013 13:51:35:143] - LOG (1110): operating system is 64-bit
  [11/08/2013 13:51:35:143] - LOG (1110): cmdline "PRODUCTIVE."
  [11/08/2013 13:51:35:143] - LOG (1110):--/-/ \-proprietes-/------------------/.
  [11/08/2013 13:51:35:143] - LOG (1110): PRINT_INFNAME = HP2030. INF
  [11/08/2013 13:51:35:143] - LOG (1110): PRINT_VERNAME = HP2030SU. WORM
  [11/08/2013 13:51:35:143] - LOG (1110): SHORT_PRINTER_NAME = HP LaserJet P203
  [11/08/2013 13:51:35:143] - LOG (1110): PRINTER_SERIES_NAME = HP LaserJet P2030 series
  [11/08/2013 13:51:35:143] - LOG (1110): PRODUCT_VIDPID = vid_03f0 & pid_5d17
  [11/08/2013 13:51:35:158] - LOG (1110): REG_INSTALLKEY = HP LaserJet P2030 series
  [11/08/2013 13:51:35:158] - LOG (1110): ISRUNNING_MUTEX_NAME = HP2030Installexists
  [11/08/2013 13:51:35:158] - LOG (1110): INSTALL_DIRECTORY = HP LaserJet P2030 series
  [11/08/2013 13:51:35:158] - LOG (1110) :-/-/-/--properties-------------/------.
  [11/08/2013 13:51:35:158] - LOG (1110): PRODUCT installation program.
  [11/08/2013 13:51:35:158] - LOG (1110): InstallSequencer()
  [11/08/2013 13:51:35:158] - LOG (1110): InstallSequencer() = 0 step
  [11/08/2013 13:51:35:158] - LOG (1110): InstallSequencer() step = 1
  [11/08/2013 13:51:35:158] - LOG (1110): - InitializeStep -
  [11/08/2013 13:51:35:174] - LOG (1110): GetLandDir - English
  [11/08/2013 13:51:35:174] - LOG (1110): printer inf: C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\\HP2030. INF
  [11/08/2013 13:51:35:174] - LOG (1110): file printer verion: C:\Users\ZekeAppData\Local\Temp\7zS2BFD\HP2030SU. WORM
  [11/08/2013 13:51:35:174] - LOG (1110): name of the printer series: series HP LaserJet P2030
  [11/08/2013 13:51:35:174] - LOG (1110): GetPrinternamesFromINF()
  [11/08/2013 13:51:35:205] - LOG (1110): InstallSequencer() step = 3
  [11/08/2013 13:51:35:205] - LOG (1110): - LicenseStep -
  [11/08/2013 13:51:35:205] - LOG (1110): license file: "C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\\license.txt".
  [11/08/2013 13:51:35:221] - LOG (1110): IDLCDialog:nInitDialog() m_positionOnBottom = 0, m_topmost = 1, m_followPosition = 0
  [11/08/2013 13:51:35:237] - LOG (1110): IDLCGenericTextDlg:nInitDialog
  [11/08/2013 13:51:35:237] - LOG (1110): chaines(): stringsDllPath: C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\strings.dll
  [11/08/2013 13:51:35:237] - LOG (1110): IDLCGenericTextDlg:nInitDialog - text to load the file "C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\\license.txt".
  [11/08/2013 13:51:35:237] - LOG (1110): text is clear
  [11/08/2013 13:51:39:141] - LOG (1110):-[IDLCGenericTextDlg 1 BUTTON pressed].
  [11/08/2013 13:51:39:141] - LOG (1110): StartProgressDialog() g_progressDlgRunning = 0
  [11/08/2013 13:51:39:141] - LOG (1110): StartProgressDialog() from dialog progress thread...
  [11/08/2013 13:51:39:141] - LOG(13A4): IDLCProgressDlg:nInitDialog()
  [11/08/2013 13:51:39:141] - LOG(13A4): IDLCProgressDlg:oDataExchange
  [11/08/2013 13:51:39:156] - LOG(13A4): IDLCDialog:nInitDialog() m_positionOnBottom = 0, m_topmost = 1, m_followPosition = 0
  [11/08/2013 13:51:39:656] - LOG (1110): InstallSequencer() = 4 step
  [11/08/2013 13:51:39:656] - LOG (1110): - PreInstallStep -
  [11/08/2013 13:51:39:656] - LOG (1110): IsDriverInstalled (List)
  [11/08/2013 13:51:39:656] - LOG (1110): IsDriverInstalled (HP LaserJet P2035)
  [11/08/2013 13:51:39:656] - LOG (1110): FindInstalledDrivers()
  [11/08/2013 13:51:39:672] - LOG (1110): PrinterDriver?  HP LaserJet P2035? = Microsoft XPS Document Writer v4
  [11/08/2013 13:51:39:672] - LOG (1110): PrinterDriver?  HP LaserJet P2035? = Microsoft shared fax driver
  [11/08/2013 13:51:39:672] - LOG (1110): PrinterDriver?  HP LaserJet P2035? = drive compatibility point and print more Microsoft
  [11/08/2013 13:51:39:672] - LOG (1110): PrinterDriver?  HP LaserJet P2035? = HP LaserJet P2035
  [11/08/2013 13:51:39:688] - LOG (1110): found driver
  [11/08/2013 13:51:39:688] - LOG (1110): PrinterDriver?  HP LaserJet P2035? HP ePrint =
  [11/08/2013 13:51:39:703] - LOG (1110): current verion printer file: C:\windows\system32\spool\DRIVERS\x64\3\HP2030SU. WORM
  [11/08/2013 13:51:39:703] - LOG (1110): file Web bundle printer verion: C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\HP2030SU. WORM
  [11/08/2013 13:51:39:703] - LOG (1110): ===>>> (gle = 2, 0 x 2) ERROR: Msg: the system cannot find the specified file.

  Context: Could not open the file of version ' C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\HP2030SU. WORM '
  [11/08/2013 13:51:39:703] - LOG (1110): Web bundle is older than the current 20120627 (3.0.1.52444)
  [11/08/2013 13:51:39:703] - LOG (1110): driver currently installed, but newer than the web package.  NEED NOT UPDATE!
  [11/08/2013 13:51:39:703] - LOG (1110): InstallSequencer() step = 7
  [11/08/2013 13:51:39:703] - LOG (1110): TerminateProgressThrd (0x44a110)
  [11/08/2013 13:51:39:719] - LOG (1110): _PostProgressMessage hWnd = 0x1402c2 msg = 1124, param = 0
  [11/08/2013 13:51:39:719] - LOG(13A4): IDLCProgressDlg:nTerminate()
  [11/08/2013 13:51:40:235] - LOG (1110): - FinishStep -

  The log entry indicates the driver already installed but the Windows Device Manager seems not to think (see attached image). By clicking on 'Properties', then on 'Events', I saw the following message (see second image). I have no idea what this error code means. Can anyone provide some ideas of what I can do next? I hate the idea of making a new printer, if there is a software solution. The printer still works fine.  For what it's worth, through the Windows Device Manager, I uninstalled the printer and driver once already in order to get a clean installation of the driver.

  Thanks for any help,

  Zeke

  Fixed. "Follow-up"clean boot"as described here: 'http://support.microsoft.com/kb/929135 ' Windows recognize it now and I can use my printer.".

• HP Laser Jet P 2035

  I bought a HP Laser jet P2035, but there is no network port with only parallel and usb port, I don't want to share this printer through my computer, I want to connect to this printer to a network. is it possible to add a network port in this HP laserjet p2035? or any other device to solve this problem? If yes tell me what device and the model number if, everybody knows about it please help me.

  You will not be able to add/use internal network port (IE internal HP jetdirect card can be added to this product)

  Card HP Jetdirect but external (USB - RJ45) or USB adapter or Wireless Jetdirect Card are available.

  You can buy one of the most suitable product according to your condition & availability according to your country/location:

  HP Jetdirect en1700 (HP part # J7988G)

  HP Jetdirect en3700 (HP part # J7942G)

  Printv HP Jetdirect ew2400 USB wireless server (HP part # J7951G)

  HP Jetdirect 175 x (HP part # J6035G)

  HP network print adapter (HP Part # Q6275A)

  Kit of reduction of HP wireless printing (HP part # Q6236A for North America.)  HP # Q6259A part for Europe, Middle East, Africa and Asia-Pacific countries/regions)

  NOTE: There could be some variations in the reference numbers given here, because of the upgrades and the country of purchase.  Please check the part number & compatibility before purchase.

• Printer indicates by unspecified and named "0 in devices and printers."

  Firmware of HP laserjet p2035 update process has failed.

  In usb mode, I can see the printer in "Devices and printers" unspecified and named '0' and there is no action.

  In parallel port, it works fine.

  Any idea?

  HP laserjet p2035 unstable in usb mode - Original title

  Hello Toma,.

  Thank you [assignment in the community.

  We are happy to provide assistance to help solve your problem.

  Before I continue, I would like you to provide the information below:

  1. What do you mean when you say "there is no action?"

  2. When you say "parallel port" do you mean in another USB port?

  For now, I suggest using a different USB cable and check if your computer recognizes the device. Otherwise, you can follow the steps below

  1. navigate to Panel > hardware > printers and devices.

  2. click on your printer icon, and then on the menu bar, choose "Print Properties Server"

  3. in the tab drivers , you can install a driver...

  For more information click on the link below

  Solve printer problems: http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  Hope this helps