HP laserjet pro 200 M276 MFP: stuck at the screen during initialization

Similar Questions

• HP laserjet pro 200 M276 MFP: Re: HP laserjet pro 200 M276 MFP: stuck at the screen during initialization

  Nice day

  TT arrives at 'initializing' on the touchscreen when turned on and will not complete the process. I can't print.

  I already looked in several software solutions that did not help.

  Has anyone experience this problem? Any suggestions?

  I have cold/hard reset as instruced. He has not fixed anything.

  The machine turns on, sounds like the printhead moves back, a bar at the bottom of the touch screen begins to fill from left to right (as the software does or something). It gets about 1/3 of the way across the screen then it stops, and two icons are flashing at the top right of the screen, a green circle and a triangle orange with an exclamation point in the middle of the FOITT.  The touch screen says initializing and stays there until I turn it off.

  Another difficulty that was tried was to open the toner tray and take all the cartridges of toner on, then put them all back in. that does not work either.

  What now?

  Help, please.

  Printer warranty has expired.

  I don't him did not myself but instructions in the maintenance manual look pretty simple.  Just remove the cover on the right and then the fax card, and then the trainer.  Just do a search on google for the maintenance manual.  Here is a list that I found a place that contains the component.  Keep in mind most of the time it is the trainer that is casuing the problem, but there is the possibility, it could be something else.  There is no test to be sure except first substitute the trainer.

  http://www.itpartsdepot.com/products/hp-cf224-60001-new.html?utm_source=googlepepla&utm_medium=adwords&id=56128534817&gclid=CjwKEAjwv8iwBRC35-_e8aPqwCESJAB8khP9BFv_xK-rff73tTUKurHyuVUWgUGwvko1pqvXXOiKLRoCDpPw_wcB

• HP laserjet pro 200 M276 MFP

  I would like to know how to set default printing to print 'daily life '.  He is stuck on "envelopes" and I have to go to every time and change.  I tried.

  Hello

  Please follow the steps given.

  Go to the icon of the printer and right click on it...

  Select print options...

  Click the shortcuts tab printing...

  Select general everyday printing
  Paper size: letter
  Paper source: automatic selection

  Click on apply and then OK

  Try a test page...

  Hope it works...

  Although I am an employee of HP, I speak for myself and not for HP.

  * Say thank you by clicking on the "Bravo!" Star"located on the left *.
  Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem.

• HP laserjet pro 200 color mfp: hp laserjet pro 200 color mfp scan show m276nw

  Hi I have a problem to use the scan software from my PC to scan the document and save it to my PC. Whenever an error message pop up: inaccessible Scanner.

  I use wireless and print without any problem, even I disable the firewall and connect with the printer cable, it still does not work. Please help me to solve the problem, I use the scan function a lot. Thanks in advance.

  Hi @RightOnMoney,

  Welcome to the Forums of HP Support!

  I see that you are having problems scanning with your HP LaserJet Pro 200 M276 MFP printer color. I'd be happy to help you with this.

  If you are able to print, but can't scan. It seems that the HP software is corrupted.

  Printing and scanning doctor may be able to correct the problem for us.

  • Please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.
  • What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If printing and scanning doctor does not resolve the problem, please uninstall and reinstall the HP software.

  • Monofunctional and multifunction printers - HP printer software uninstall.
  • Important! Please use the printer Install Wizard. The HP printer installation wizard detects automatically the best print available for your HP printer driver. Download and run The Installation Wizard for printer () a free tool from HP. When you click this link, HP printer installation wizard is downloaded using the download of your Internet browser capabilities.
   

• Urgent: HP LaserJet Pro 200 Color MFP M276

  Heeeeeeeelp! Urgent!

  I am looking for the software and driver for HP LaserJet Pro 200 Color MFP M276.

  To the HP Web site, there is no download available.

  Who can help me with a link downlod?

  [Personal information]

  Hello

  Download the software on the HP site is fully accessible, I downloaded it without any problem at all right now.

  The following lik select your operating system and click on send, and then click Download for the full feature software and drivers:

  http://support.HP.com/us-en/product/HP-LaserJet-200-color-multifunction-printer/5097648/model/5097653/drivers

  If you have problems please specify what operating system you are using.

  Shlomi

• Color LaserJet pro 200 M276nw MFP - Scan configuration and installation on Mac Yosemite

  Hi all

  I just bought a new LaserJet pro 200 color MFP M276nw and I am trying (for 4 days) to coorectly install it.

  My goal would be to use it via the wifi connection and I put it correctly by the façade.

  When I try to install the printer on wifi, I can install the printer driver, but I can't find the driver for scanning.

  I tried to connect by ethernet and the system to emphasize a multifunction scanner and the printer driver. If use them, it works correctly.

  Whenever I go out the lan cable for use in wifi it lose the scan functions.

  What I am doing wrong?

  Thank you

  Gianluigi

  Hi @gianluigi1982 ,

  I see that you have problems with scanning via the wireless network, but you can scan through an Ethernet connection.

  I would like to help.

  Do you have what drivers installed the printer? (Apple update or the 10.9 download drivers)

  I checked our laboratory with 10.10 installed on this computer and I was able to browse for printers and Scanners on the wireless network.

  Check the version of the driver installed.

  Go to the Apple preferences system, printers, and Scanners, highlight the Laserjet printers, click the print tab on the right side of the window, and select the Options and supplies.
  Under the general tab it will give the list the version of the driver.
  19.9 is one on the lab.

  Which driver you have show?

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (MFP Laserjet Pro 200 M276)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  In the printers and Scanners window, highlight the printer on the left side, to the right of the window, you should have a print/scan tab, click Scan, and then open Scanners and test scanning. If you do not have the scan tab, let me know.

  

  Have you added the printer as your Hello or via the IP protocol? (cannot scan through the IP Protocol)

  You use the automatic IP address or your own static IP address?

  Here is some information for scanning in OS X v10.10 Yosemite without software HP.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• Color LaserJet Pro 200 M27nw MFP - problem scanning ADF

  Seems to me a new Color LaserJet Pro 200 M27nw MFP running on a PC with Windows 8 and have come to realize that whenever I scan from the ADF Document (CAD), no output file is generated. The original document is drawn in by the document successfully feeder and the printer display indicates that the scan is ready. However, no analysis file is generated. This happens regardless of know if I send the output to USB or to e-mail and if the original document leaves simple or multiple.

  Interestingly, the ADF works fine if I try to produce paper copies, in other words, the printer is able to pull in the leaves o FRENCH original of the document in the ADF (as this either alone or several sheets) and to produce copies of the original successfully. Furthermore, I have no problem to scan multiple or single sheet documents when the original document is loaded by the Scanner flat, rather than the document feeder Scanner.

  Appreciate any help. Thank you

  Stephen

  HI @StephenScerri ,

  I see by your post that when scanning from the ADF there is no output file containing the scan which is generated on USB or e-mail. You can copy the ADF and scan successfully of the bucket. I would like to help.

  Is this printer the Pro 200 M127nw MFP Laserjet

  I have provided a document for how Scan: Windows 8

  When you scan from the magazine, you get an overview of the analysis of the computer software?

  What is the scan preview, but do not save it to the computer?

  What software are you using to scan?

  Try saving the scan on the computer, if you get a preview, to see if it will save the scan it.

  Please provide detailed results if you're still having problems.

  Have a great day!
  Thank you.

• Multifunction color HP LaserJet Pro 200: HP LaserJet Pro 200 color MFP M276nw on El Capitan: Scan does not

  Since my upgrade to El Capitan my USB connected HP LaserJet Pro 200 M276nw MFP color analysis no more.

  What I've tried so far:

  Installed the latest drivers > unsuccessfully

  Tried all the solutions suggested here: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-LaserJet-Pro-200-color-MFP-M276nw-Scanni... > no success

  Have any suggestions what to do next?

  Update: the solution provided in this thread solved my problems:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/HP-LaserJet-2300-not-working-with-El-Capitan/m-p/5281267/highlight/true#M61077

   

• HP Laserjet Pro 200 Color MFP FAX answering machine vs M276nw

  We have the following MFP: HP Laserjet Pro 200 Color MFP M276nw

  Our office has a phone line to be shared between the phone and FAX (M276nw). The phone is a phone single line of integrated with a digital answering machine Panasonic KX-TG7531 model. I can't seem to find the right combination of settings for ringtone for the phone and the FAX that allows callers to leave a voicemail without the FAX modem tones interfere when the caller leaves a voice message. It's as if the fax does not recognize that the answering machine picked up and he continues to make sounds of modem. The tones are saved as well as the message of the caller's voice, which makes the message difficult to understand. In most cases, the caller simply hangs up without leaving a message (we've heard talk about this later).

  Please tell us how to implement. Thank you!

  Furthermore, the HP Laserjet Pro 200 Color MFP M276nw replaced a MFP from brother, but the Brother FAX has worked with the same phone from Panasonic.

  Hi crmarrio

  I understand that you are having problems of fax.

  Run this test for the fax.
  In the home screen, press the button on the key.
  Tap the service button.
  Tap the fax service.
  Touch run fax test.

  Check all these fax settings.

  Here is a url for the fax troubleshooting.

  http://support.HP.com/us-en/document/c03363598

  Go to the icon/fax setup menu/Advanced Configuration key / private receive/disable it.
  Go to thewrench icon/service/fax service/error correction/stop.

  Go to Settings icon/fax thewrench / fax/advanced/change configuration to speed it to the middle.

  Go to the key icon/fax installation base/menu Configuration/response/game of rings rings.

  (if using an answering machine-more rings on fax and answering machine or rings of mail without a voice for the fax, but receives no voicemail, should get installation of distinctive ring on the line in this case)

  Go to the key icon/fax setup basic menu setup/response/selection of auto mode.

  Go for a key icon/service menu/fax service/clear saved faxes

  Go to key icon/fax installation base/menu setup/distinctive ring/set for proper ringtone type. (if you don't have a special ringtone set on all ringtones.

  Update the firmware of the printer by usb connection.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&docName=c03363598&LC=en&product=5097654&

  Let me know the results of the fax test, and if you were able to send or receive a fax.

  If you're still having problems, let me know and I send you private message how to reset the printer.

• LaserJet Pro 200 color MFP m276nw no network connection with Linksys HUB

  Hello

  I install my Color LaserJet Pro 200 m276nw MFP to connect to my home network using a wired connection.

  When directly connected to my router, the connection initializes and successfully receives an ip address. I was able to access all the functions connected to my router directly either wired or wireless network.

  I also have an old Linksys hub and when the printer is connected to the hub, it does not initialize the network connection. The hub works with all the other sevice in my network, including a few game consoles and a Mac Mini.

  Is there a network advance setting that I have to look?

  Thank you

  Hello

  I don't know if an IP address conflict is my problem as it is not a problem with another device on the network. But it is certainly a kind of incompatibility.

  I found a work around. I have an old LInksys WRT54GS router, I was about to sell and read that I could turn in a switch with a custom firmware, DD - WRT. After you have installed the custom firmware and following some instructions to configure in a switch (including setting a fixed IP address as you suggested), the router-turned-switch worked like a charm.

  So, it is definitely an incompatibilities with the Linksys Hub EFAH05W. Maybe this printer don't like hubs. I read the hubs do not succeed as a router or a switch network traffic only.

• HP LaserJet Pro 200 Color MFP: HP LaserJet Pro 200 Color MFP M276n: low memory

  Hello

  my new M276n printer has memory problems. Printing over two pages are stopped with a notification of "memory". I searched this forum and found a 'temporary' solution (reset printer to default settings) and a stage of 3 mysteriously missing (deleted the message). This does not in the long run because after only 4 more printing, I have the same problem again. I don't print many, mainly Amazon returns labels and information. Reset or not, the information page shows 127MO 256 MB available memory. What is the other half serving?

  Issues related to the:

  1. is there a solution?

  2 can it help if I disable unnecessary features (fax)?

  3. can I disable fax? (If Yes: how?)

  4. is there a solution?

  Thank you!

  Restore the default settings is not usually serve the memory of a printer.  You need a cold reboot to complete this procedure.

  Cold Reset as follows:

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/HP-LaserJet-Pro-200-color-MFP-M276nw-cold-reset/TD-p/5060955

  The video at the bottom of the first page is very useful.

• the white pages when printing for laserjet pro 200 color MFP M276nw

  When printing to my color Laserjet pro 200 M276nw MFP, the pages are all empty.  I tried to put off the printer and tried to have disconnected and reconnected.  That did not help.  The pages are still blank.  Any suggestions?

  You are unable to print the 'print quality Page' of the façade or do not know how?

• Are total prints Page current cumulative use? HP LaserJet Pro 200 color MFP M276nw

  I have a HP LaserJet Pro 200 M276nw MFP color

  Are total impressions on the Page report cumulative use for the life of the machine?

  I want to print a Page 'use' every month, because I want to know the total number of impressions (impressions & copies) I print every month, or between two dates for that matter.  This will also help me to know the number of impressions I get from my ink, etc.

  If the 'Total' Impressions is cumulative, then I can just subtract two numbers - one of the last - to get the difference.  But if this isn't the case, then I have no precise information.

  Help, please.

  Thank you.

  Yes, the total number of impressions is cumulative over the life of the product.

• Connectivity Bluetooth on HP Laserjet Pro 200 color MFP M276nw

  Madam/Sir,

  There the bluetooth on HP Laserjet Pro 200 color MFP M276nw connectivity?

  Hello

  I looked towards the top of the form to you, and not, unfortunately there is no bluetooth device.

  http://support.HP.com/us-en/document/c03315988

• m276nw: more great paper for hp laserjet pro 200 color mfp m276nw tray

  Is there an extra tray for the m276nw

  Sorry, the input tray 150 standard page is only available for the HP Laserjet Pro 200 m276nw Color MFP tray.