HP laserjet pro 200 M276 MFP: Re: HP laserjet pro 200 M276 MFP: stuck at the screen during initialization

Similar Questions

• HP laserjet pro 200 M276 MFP: stuck at the screen during initialization

  I liked my printer and it was working perfectly until a couple of weeks. Now he arrives at 'initializing' on the touchscreen when turned on and will not complete the process. I can't print.

  I already looked in several software solutions that did not help.

  Has anyone experience this problem? Any suggestions?

  Thanks for your reply.

  I finally find the SN, and given that my product is still under warranty, I called technical support. We did a lot of troubleshooting without success.

  They'll send a replacement.

  Thanks again for working with me.

  Lost to Houston

• Trackpad of MacBook Pro gets stuck and the screen freezes with pink and yellow lines

  So I'm really frustrated. I got my Macbook pro less than a year ago and Ive already had to get a bunch of replaced parts. I got my computer fixed as 3-4 weeks ago and they had to replace a lot of things (can't remember not what it was, but they had to remove all of the computer and replace some things that have been associated with the battery power /). Recently my computer did this weird thing where the screen freezes and pixelated pink and yellow lines will take right on the screen. In addition, the trackpad will be just stuck and I have to turn off my computer and turn it back on so that everything works. Someone at - he heard about something like that? I thought that maybe when I had my computer repaired they didn't replace not all properly? I did a check of the hardware on my computer (self-control an Apple recommended prior to an appointment at the Genius Bar) and he said that everything was going well. This poll looks like a hardware problem? Could this be a virus? Someone hack into my computer? I don't know, I'm just worried and frustrated :/

  Thank you!

  Photographing display abnormalities and make an appointment at an Apple store genius bar.  You are still in the warranty period and you have the properly repaired MBP.

  Ciao

• Satellite Pro 4600 - very low picture on the screen

  Guys, I really need help.

  I picked up on old satellite pro 4600 eBay and have rebuilt the thing - everything works EXCEPT the screen - I get a very small image, even on the start screen.

  So far I have - changed the cable lcd - no effect. changed the Panel itself, no effect and inverter (4 times!).

  Any suggestions? Driver problem? Setting I missed somewhere? Motherboard problem?

  Hmmm. My first thought was the faulty FL inverter.
  Are you sure you used the right and compatible FL inverter? A connect it correctly?

  What about the keys FN + F6/F7? It allows to set the brightness to a higher level?

  Then maybe you should check for this possibility.

• Re: Satellite Pro A200 - no activity - nothing on the screen

  Hello!

  I have a lot of problems with the Toshiba Satellite Pro A200.
  Same problem for all: when you connect the power adapter led turns blue!
  When I press on "on" button the second led turns blue, the fan runs for a while, but there is not activity: nothing on the screen.
  No thing hard disk led...

  I have a lot of this problem with the Satellite A200. The motherboard is a LA - 3481P.
  I am an electronic engineer and I m specialized in laptop repair card main but I did not understand this problem.

  Can U help me telling me that maybe the defective chip?
  Thank you very much

  Hello

  I don't know if you saw that this forum is the forum of users and you should not wonder if nobody can give the exact answer. As an electronic engineer, you must know that no one can answer specifically and to find the good chip, you must run diagnostic tool.

  So I think that you need professional help. Try to contact nearest Toshiba authorized maintainer and ask for help.

  BTW: I am really interested about new comments here.

• Satellite Pro A210 - repeat vertical lines on the screen

  I hope someone can help me.

  I am a teacher and was bought by my school a Toshiba Satellite Pro A210 for me to do my school work and connect to a SMART board to teach with. Throughout its probably one of the best laptops I got through school. I got it two months.

  There is only one problem with it. Its developed a rather weird problem. Occasionally, the screen suddenly freezes, and the display will be replaced by thin, alternating vertical black and white lines. The only way to get rid of them is to turn off the laptop and restart it (particularly annoying when it happened in the middle of a lesson when I've been respected by an OFSTEd Inspector!)

  Technician computer school has no idea what is the cause. I was wondering if someone here might have some advice.

  Thanks in advance.

  I ve the same laptop but I didn t receive similar lines on the screen.
  What you could do is update the BIOS and the driver (if possible) display.

  If the same problem happens again, you must connect an external monitor to the laptop.

  Then check if the same lines appears on the external display. If so, then a problem of graphics card might be possible!

• 2010 15 "MacBook Pro unexpected stops and defects of the screen

  As stated in the subject, I have a 2010 15 "MacBook Pro that runs on OSX Mavericks.

  I have experienced unexpected stops and, more recently, the screen glitches (see photos).

  I also have this message since Photoshop at a secure startup: "Photoshop gave up waiting for the assessment of the display driver.  Improvements using graphics hardware have been disabled.  Check the Web site of the manufacturer for the latest version of the software.

  Please review my images for more information.  I made a Starter course and managed to back up my computer (took 6 hours).  Now, I just need to fix it.

  PROPOSED ISSUE: I think I'll have problems of GPU and is forced to remove my components materials dust or replace certain parts.

  Please let me know if you have any ideas or solutions that could make me run!  Thank you!

  

  I suggest to install "El Capitan", a clean install, in this case, could be better

• LaserJet Pro m177fw loud rattling and then is blocked during initialization, will not print

  Hello

  This printer has delivered today, it looks awesome, but when I turn it on, it was a rattling noise (as something to try to turn it on, but do not attract a gear or something on the inside, this happens immediately to market, and then he's stuck in the initialization.  If I go to the home button and go to configuration, then reports and report configuration panel, I get a big green check mark.  I noticed that on the menu item straighter, there is a yellow warning, and it doesn't seem to be able to get details on the color ink levels.  I took the ink cartridge and looked at him and it looks like there is not something to activate the cartridge (it was in my very old HP Laser jet).

  What Miss me on the installer?  I read the instructions twice and also hard to put off the printer by pulling on the plug and wait a minute to plug it back in.  Same thing happens, thank you!

  Sean

  Well Yes, I found it, but then he touches, the printer goes just to 'initializing' to "xx_color_xx forward movement", well, nothing moves, it stays like this all night.

  So here's the answer.  After spending over 2 hours with tech support, they concluded that the faulty unit.  Unfortunately the HP support could only charge me $10 to replace, so I had to call the store (which oddly enough was also HP, which means that the display of the organizational structure of HP for me.)  ), I had to remind HPShopping.ca and get them to replace it.  I get a label shiping and will send it back and get a new one.

  Thanks to those that Chorus and helped.  Appreciate the efforts with the community forums!

• Satellite Pro A100-81: memory Pro Duo card is stuck in the card reader

  I am the proud owner of a Satellite Pro A100-81. I inserted a Duo Pro Memstick into the slot of the card reader...

  The card slipped too deeply into the slot so that I unfortunately can't remove the card more.
  Any ideas how to remove the card?

  Hi Gary

  Are you sure that the laptop computer s card reader supports memory stick Pro Duo?
  It s unusual who supported cards will slip to deep into the slot, something as may occur if the card is not taken in charge and is not compatible with the slot

  However, you shouldn't t do anything hard disk average if you n t know how remove it ask someone to help him with more experience for laptop

• HP Laserjet 1020:1020 print job stuck in the queue prevents other print jobs.

  It says printer problem

  A print job in the print queue prevents the other print jobs

  I bought this printer in a second hand store.  I plugged it on so I thought because I didn't have the cd can I download HP.  I was able to pick up the pilots just by plugging.

  Is there a way to get the print job from that other person removed seems strange he is stuck need helpppppppp

  I tried the fix for windows and it does not work is something I missed I tried the printer stop and nothing

  It is now fixed what I had to do is remove the printer in my computer, and then re-download the drivers and then he allowed this.  Thank you for your patience and help.

• OfficeJet Pro 8600 Print more stuck in the wireless network that

  My windows computer uses XP with SP3.

  I recently installed this new printer / all-in-one. The printer is used in a business office. Earlier in the day, the print function works fine. The function scan and I works pouvons fax direcltly to the computer. I can print from my I phone. But then, without any error message printouts begin to get stuck in printing (QC)

  I can always print from my Iphone and I can always use the other functions (scan & fax). I can print to other printers on network.

  I noticed that hpnetworkcommunicator.exe runs twice in the Task Manager when this happens and I end a session to release sometimes draws. In addition, when this occurs I can restart the computer and which also enables the printer working properly again. When I restart the computer, I'm going to finish the rundll32.exe process I've ever had to do before installation of the new printer.

  I tried the HP print and doctor Scan and everything removed but she recommended that disable the firewall settings. I still have the problem with the firewall disabled.

  Thanks for any help.

  http://support.HP.com/us-en/document/c02817031

  Follow this document, sounds to me like you may have to uninstall/reinstall the printer software. Try reinstalling from the downloaded driver at www.hp.com under Support and drivers/Drivers and software. Good luck!!

• Intermittent failure to detect the screen on startup on the Satellite X 200

  For awhile now, my X 200 suffered intermittent problems with the screen. When turn he will deliver a long and two short beeps and then proceed to start but without the screen.

  I normally feed the cycle several times and find that it sorts itself, but tonight he would not cooperate so I dug a cable for my TV and used as a monitor and of course the machine starts very well and after POST went immediately to the embedded poster again. Does anyone have an idea what is happening and why?

  A little more background.
  This is slot and turned off for about a month now.
  I used a variety of drivers the two latest WHQL and LV2G releases, but they all have the same problem.

  Right now I'm on the default of most drivers, and I'm going through the process of sprinkled updates having rebuilt just clean the machine because of other problems (in a separate thread), but immediately before reconstruction, the problem has been all too obvious and all the drivers were later so I don't think this is a driver related issue or at least not one that seems be resolved by any of the releases.

  Seems rather strange. Did you check your BIOS options? Maybe you should set this back to the default settings.
  Or try and install the latest version of the BIOS.
  If that's not enough, and I read that you already have a clean reinstall the latest drivers, I would say that contact local ASP, as a beep sounds are not normal.

  They can tell you what mean these sounds.

• LaserJet Pro M127fn MFP: Stuck on "Print Fax Front Page.

  This MFP is stuck with the message, 'Printing Fax Page One' I've tried the reset instructions are on the forums, but cannot get rid of this message. Is there a reset 'hard' or 'factory' I can do? Thank you

  Hi again,

  I would say for updating the firmware of the printer.

  Here is the link just choose your operating system and select the firmware download.

  HP LaserJet Pro M127 MFP series Firmware update

  Make sure that you scroll to the Firmware section.

  See if that helps

• Laser Jet MFP M125nw Pro: the paper is stuck inside the printer

  the paper is stuck inside the printer Laser Jet Pro MFP M125nw

  Did you follow the information from the HP web site?

  http://support.HP.com/us-en/product/HP-LaserJet-Pro-MFP-M125-series/5396664/model/5303404/document/c03921935/

• LasarJet Pro MFP M226, M225: Tray is stuck in the open position

  Tray is stuck in the open position. When you print a copy, has had a paper jam. Open the lid and jam cleared, but cover will not close. I get a slight noise to slam, but do not use any pressure. Is there a version any?

  Hello @Liberty76and welcome to the Forums of HP!

  I'd love to help you with your Laserjet Printer. I understand the feed from the ADF tray is stuck in the open position and you are afraid to break if you use too much pressure. I suggest to use the following document to ensure there is no pieces of paper inside preventing them from closing: HP LaserJet Pro MFP M225 and M226 Printer Series - a "Document Feeder Mispick" Message appears on the control panel and the ADF is not Pick Up paper, feeds on several Pages or jams.

  If nothing is blocking the closing plate you need to expand the more open plateau then try close.

  Please mark your post as solved by clicking on the accept as Solution below if this solves the problem. If there is anything else I can do to help let me know. Thank you.