HP Laserjet Pro 400 color M451dn - printing problem

Similar Questions

• HP LaserJet Pro 400 color M451dn

  Hello..

  I just want to know if I'll be able to print using color HP LaserJet Pro 400 M451dn, even if a toner is empty.

  Need to answer you as soon as possible... IM planning to buy one. Thank you

  If one of the (black) toner cartrdige is complete, then printer stops printing.

  You can continue to print with black, if one of the color cartridge is very low.

  Please check the following link for configuring power settings to use & their meaning (System-online power settings Setup Menu) HP:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/learnUseDisplay/?sp4ts.oid=4346082&spf_p.tpst=psiContentDisplay&spf_p.prp_psiContentDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c03257478-4%257CdocLocale%253Den_US&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• LaserJet Pro 400 color m451dw: printer Laserjet Pro 400 color m451dw for window 10 drivers

  I can't find the drivers for a m451dw Color Laserjet Pro 400 running on Windows 10.  The only available operating systems are Mac.  Is there another place to look for drivers window other than the drivers regualer section 10?

  10 64-bit Windows

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462 & swLangOid = 8 & swEnvOid = 4192

  10 32-bit Windows

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462 & swLangOid = 8 & swEnvOid = 4191

  ------------------------------------------------------------------
  Say 'Thank you' by clicking the Bravo (Thumbs up) button in the post helped you.
  Please indicate the position that solved your problem as "acceptable Solution".

• LaserJet Pro 200 color MFP: print problems when you use the charger

  Copy and scan works very well when I place the original on the glas

  However, if I use the charger a straight black line appears from the top down in the middle of the copied or scanned document.

  How can I fix

  Thanks, MariusMo

  Hi MariusMo,

  I'm glad that the problem has been resolved with the cleaning.

  Please consider tagging 2 Message like "Accept as Solution" so that someone else in the community who may encounter this problem can more easily find the solution.

  Best regards!

• Help! My M475dn MFP HP LaserJet Pro 400 color printer will NOT print!

  HP LaserJet Pro 400 color MFP-M475dn-CE863A

  Printer on a network and can connect to multiple computers that include: Mac OS X, Windows 7 and Windows XP.

  When I try to print from my iMac, the print queue of the printer says "the printer is not connected.  When we try to print from Windows computers, it is in the right queue and does not print.  When I go the printer itself and try to print a page of demonstration or page supplies directly to him, it says on the screen which is printed, but nothing happens.  This is not hum or anything!  The port where the network cable is connected is switched on green that says HP which means that the network cable is connected.  We've had this printer for a year now, and something like that never happened.

  I did not have any software or anything like that until this happened.  It was working fine on Saturday when we used it, but when we arrived at work today, he just decided that it would interrupt printing!

  I'm puzzled!  I tried 'ping' IP address of the printer from my iMac and it pings fine.  Does anyone have advice?

  (I tried to make of the obvious like too switch the printer on and off and shutting the computer down and nothing!)

  Okay, so I feel a bit stupid right now.  I decided that I would be closed the printer for about an hour to see if it was there, and what you know-it has been!  I had to turn it off several times before but I guess it wasn't long enough.  What a pain!

  Thanks to everyone who took the time to read this!  Sorry to waste time everyone!

• turn off the broadcast without wire - HP laserjet pro 400 color mfp m475dw

  How do I disable broadcasting SSID for HP laserjet pro 400 color mfp m475dw.  I disabled the configuration via the web console wireless printer, but it is still broadcasting.  I also updated the firmware to 20131028 last available.

  Since it is wiered one of the scenario, I could solve this with the help of the HP Support is by doing factory reset/NVRAM reset the unit by turning the printer and holding right arrow and cancel on the touch screen of the device (cancel is on the lower right of the touch screen on the black area and right arrow is just above him (one in the middle of the Panel) in the same black box) and the device of turning on until the message something like storage reset... is displayed and can release the two buttons/zone button.

• HP LaserJet Pro CM1415fnw color multifunction printer - cannot FIND the WIRELESS NETWORKS

  PRINTER: HP LaserJet Pro CM1415fnw color multifunction printer

  OS: Windows 7

  OWNER: More than 2 years without any problem

  LOCATION/SET-UP: To my personal residence. All-in-one router through the cable company.

  QUESTION: Suddenly, printer cannot find wireless networks. Nothing has changed recently in my service provider or equipment. I know that the router and the internet is not the problem because our 2 smart phones and three laptops still not connect. I triend manually configure the network using the SSID and key phrases, but still nothing.

  Help!

  I would like to perform a hard reset by removing the power of the whole machienethrough the power cord for 30 seconds. Depending on whether I have would reconnect the printer to the wireless network and set a static IP address.

  -Spencer

• I get a pcl xl error message when we print our LaserJet Pro 400 Color MFP

  When I scan or fax, we get:

  PCL XL Error

  Subsystem: TEXT

  Error: InternalError 0 x 50

  File name: cheettext.c

  Line number: 710

  The printer is a Pro 400 Color MFP LaserJet - m475dw

  Windows 7 Professional Service pack 1

  What should I do to fix this?

  Thanks for the help.  I actually did an update of the firmware and it solved the problem.

• laserJet Pro 400 color: printer

  Hello Mr President
  I want a help on your part I have a Color LaserJet Pro 400 m475dw MFP
  and when I turned it on. I show masseage like this {10.1002 electric memory error}
  How can I solve this problem, Mr President

  Hello Sir,

  The error that you expose is a problem with one of the toners.
  The magenta to be precise.
  
  In this case, the recommended action is to replace the magenta toner with an original RESUME.
  
  Kind regards

• grinding noise when my HP LaserJet Pro 400 color MFP M475 calibrates

  When my color HP LaserJet Pro 400 MFP M475 recalibrates, I get a grinding or gear sliding noise.  No idea how to fix it or what to look for?

  Noise problems are difficult to troubleshoot remotely and they could easily mislead even when we are near the unit.

  Please confirm if the noise is a squeak or a noise squeky/hum.

  As you mentioned that this happens only during calibration, it is why I suggest you to double check & validate your toner cartridges.  Among the toner cartrdige is maybe defective and causing this problem.

  If not the toner cartridge, then it would be one of the components of hardware printer that is at issue, where a Tech HP may need to perform a physical inspection of the aircraft and the error condition.

• LaserJet Pro 200 Color MFP: Print greeting cards

  Trying to print greeting card, side fold brochure front and back on a single page. Currently only able to print front and back on two separate pages creating cards on Microsoft Publisher. To print on printer Okidata without problem. Should what settings I have this HP Laserjet Pro 200?

  Hi srbabe11,

  Thanks for providing this information.

  I have provided the manual with the steps to change the properties of the printer, starting on page 34, which should help to print greeting cards.

  MULTIFUNCTION LASERJET PRO 200 COLOR PRINTERS.

  I had set the Pages per sheet: 2, then set the layout of the booklet as a result.

  If you appreciate my efforts, please click on the button below the thumbs up.

  If there is anything else I can help you, let me know. Thank you.

• LaserJet Pro 400: Watermark not printing on Laserjet Pro 400 on Windows 8

  On the computer of Windows 8, watermark does not print on Laserjet Pro 400 connected by USB. Please note: the function watermark works on other printers not HP, as our networked Ricoh copiers. The printer prints a watermark on a Windows 7 computer. Using the driver package LJM351_M451_Series-12200-drv_installer.

  Very hard to advise without additional evidence (such as samples).

  With my Windows 8.1 Pro 64-bit system, I can print watermarks on my LaserJet Pro MFP color 400 M475dn (equivalent of MFP M451) device.

  Attached is a zip container file:

  • Small text in the abcde.txt file that contains the text "abcde".
  • Print file abcde.prn contains the print job generated by opening the text file in Notepad and by printing the document (using the driver of HP LJ300-400 color MFP M375-M475 PCL 6 (61.120.5.12262) UPD version 5.3.0.12262), by specifying the "SAMPLE" watermark with the default settings; exit 'captured' by using the option "print to a file.
  • Text file abcde.prn_analysis.txt contains an analysis of the contents of the print queue.
  • PDF file abcde_scan.pdf shows a scan of the printed output by sending the contents of the direct .prn file to the printer port.

  Try to send the contents of the .prn file direct to your printer port; for USB connect, you must use something like:

  copy  /b  abcde.prn  \\computer-name\share
  

  in a Windows command prompt session, where:

  the computer name is the name of the workstation;

  share is a share of the Windows printer instance name.

  The resultant prints show the watermark of the SAMPLE ?

  If so, then the printer handles the commands to the printer (in this case using PCL XL) OK.

  Can generate something similar to your driver for analysis?

  [You will probably need help moderating to attach files in this forum].

• LaserJet pro 400 color: Blue lines on the right side of the page when printing in color

  When printing in color I get this blue line that occurs on the right side of the page. It is darkest near the edge and shoot low towards the printed part of the document. It is a vertical line that follows the entire length of the page. I printed a report of quality and it is always present. In my view, this indicates that it is a hardware issue, rather than software. Is there some rolls or the part that needs to be cleaned? Can you provide a link to the instructions?

  Thank you!

  Replace the cyan toner cartridge.

• HP LaserJet Pro 400 color: HP Laser Jet Pro 400 color M451dn

  Just got back from vacation and the language on the digital screen has changed I have know idea what language it is, how do I get it back to English.

  Thank you!

  MontC

  You can try the steps below to change the language to English:
  1. Click Start , click all programs.
  2. look for the HP list, that you highlight of HP, right, will open another menu that displays your printer.
  3. highlight the name of the printer, and that opens another menu with box tool from the HP device. Click the device HP Toolbox.
  4. a page opens. Click the System along the top and which opens a drop-down menu. Click on System Setup. This page of research and in the middle is language and select English. Click apply and close the window.

• HP LaserJet Pro 400 color MFP M475 - driver Linux

  According to the product description page, this printer is supposed to have a Linux driver available, but I can't locate one.

  Nobody knows where and when you can be available for download?

  Thanks in advance.

  HP LaserJet 400 colorMFP M475dn NPIE7A8DA

  OS: Linux (any flavor)

  I think that this is the site you need to get the information you're looking for:

  HP Linux imaging and printing

  Supported printers

  MFP color HP LaserJet 400 m475dw