Problemas al momento encender machine sonido

Similar Questions

• Problema ao melting uma VM (problem building a virtual machine)

  Good afternoon a todos.

  (Hey),

  Estou com um problema no VMWare em had I can not melting uma VM. Ocorre a mensagem "Unable to access file < unspecified file name > because it is locked ':

  I have a problem in VMWare où I can not build a virtual machine. Occurs le message " Cannot access the file <not specified filename > because it is " locked":

  

  POIS bem, I tried melting a Máquina an outra forma, that faith: fazer um snapshot da VM, remover instant esse e depois mover para outro DataStore. Led a mensagem erro abaixo:

  Well, I tried to consolidate the machine otherwise, which was: take a snapshot of the VM, remove this snapshot and then move to another data store. Le the error message below has occurred:

  

  Inclusive isso occurred depois o Avamar estava um doing backup, mas houve uma is na rede, e o processo faith backup interrompido. O Quebec EU posso fazer nesse caso?

  Same as has occurred after the Avamar was a backup, but there was a failure of network and the backup process has been interrupted. What I can in this case?

  Obrigado desde ja,

  Thank you

  Otimo... vai ser color some proxy that esta lockando o seu servidor vmdk... para saber qual, nao is for many, acesse as configuracoes da Máquina virtual proxy, locate o referring disco seleciando disco, a virtual com problema e o LFR machine an option 'remove from Virtual Machine", according an imagem abaixo:

  

• where can I report a problem with a virtual machine died, which I can't save now?

  It looks like a lot of places, but it is not clear where I should take this problem to.

  where can I report a problem with a virtual machine died, which I can't save now?

  He is buried in the VMware Community Infrastructure - here is the link to this forum - http://communities.vmware.com/community/vmtn/server/vi/esx3.5

• With the help of gsoap/C++ web SDK problem reconfiguring the Virtual Machine

  Hi all, I m using gsoap/C++ with web service sdk to monitor virtual machines.

  I m able to enumerate the current list of virtual machines, total number of vm. Now I m trying to reconfigure the virtual machine. My Code snippet is as below.

  The virtual machine is running and I m trying to change the ram, I did it using java api and it doesn't butfor c ++ it is in error.

  ns1__VirualMachineConfigSpec vmSpec;

  ival long 64;

  vmSpec - & gt; memoryMB = & ival;

  ns1__ReconfigVMRequestType reconfigVMRequestType;

  reconfigVMRequestType.spc = & vmSpec;

  reconfigVMRequestType._USCOREthis = vmObject - & gt; obj; managed object - virtual machine

  NS1_ReconfigVM_USCORETaskResponse reconfigVMResponse;

  ns1__ManagedObjectReference * morResult = 0;

  If (vim - & gt; __ns1__ReconfigVM_USCORETask (reconfigVMRequestType, & reconfigVMResponse) == SOAP_OK) {}

  morResult = reconfigVMResponse.returnval;

  } else cost & lt; & lt; "Unable to machine virtual reconfig." & lt; & lt; ENDL;

  Now in vSphere Client it show me error like.

  The operation is not supported on the object.

  And on server esxi in file /var/log/vmware/hostd.log it not show gives following error.

  The task was created: haTask-32 - vim.VirtualMachine.reconfigure - 1422

  2009-08-26 20:54:17.669 verbose 149A5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Reconfigure: (vim.vm.ConfigSpec) {}

  dynamicType = & lt; unset & gt;

  changeVersion = & lt; unset & gt;

  name = & lt; unset & gt;

  version = & lt; unset & gt;

  UUID = & lt; unset & gt;

  instanceUuid = & lt; unset & gt;

  npivWorldWideNameType = & lt; unset & gt;

  npivDesiredNodeWwns = & lt; unset & gt;

  npivDesiredPortWwns = & lt; unset & gt;

  npivTemporaryDisabled = & lt; unset & gt;

  npivOnNonRdmDisks = & lt; unset & gt;

  npivWorldWideNameOp = & lt; unset & gt;

  locationId = & lt; unset & gt;

  ID = & lt; unset & gt;

  alternateGuestName = & lt; unset & gt;

  annotation = & lt; unset & gt;

  files = null (vim.vm.FileInfo),

  Tools = null (vim.vm.ToolsConfigInfo),

  Flags = null (vim.vm.FlagInfo),

  consolePreferences = null (vim.vm.ConsolePreferences),

  powerOpInfo = null (vim.vm.DefaultPowerOpInfo),

  numCPUs = & lt; unset & gt;

  memoryMB = 64,

  memoryHotAddEnabled = & lt; unset & gt;

  cpuHotAddEnabled = & lt; unset & gt;

  cpuHotRemoveEnabled = & lt; unset & gt;

  cpuAllocation = (vim. NULL in ResourceAllocationInfo),

  memoryAllocation = (vim. NULL in ResourceAllocationInfo),

  cpuAffinity = null (vim.vm.AffinityInfo),

  memoryAffinity = null (vim.vm.AffinityInfo),

  networkShaper = null (vim.vm.NetworkShaperInfo),

  swapPlacement = & lt; unset & gt;

  swapDirectory = & lt; unset & gt;

  preserveSwapOnPowerOff = & lt; unset & gt;

  bootOptions = null (vim.vm.BootOptions),

  vAppConfig = null (vim.vApp.VmConfigSpec),

  ftInfo = null (vim.vm.FaultToleranceConfigInfo),

  vAppConfigRemoved = & lt; unset & gt;

  vAssertsEnabled = & lt; unset & gt;

  changeTrackingEnabled = & lt; unset & gt;

  }

  2009-08-26 20:54:18.122 149A5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' State Transition (VM_STATE_ON - & gt; VM_STATE_RECONFIGURING)

  2009-08-26 20:54:18.125 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Memory hot asked.

  Load: Existing file loading: /etc/vmware/license.cfg

  2009-08-26 20:54:18.139 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Verified hot license

  CloseSession called for the session id = 52f7f6aa-3ef8-c52a - 815 a - 75B 421405075

  Event 714: Root user is disconnected

  ERProviderImpl & lt; BaseT & gt; : _GetChanges: version 32 overflow name aggregation

  ERProviderImpl & lt; BaseT & gt; : _GetChanges: aggregate the version 32 overflow triggeredAlarmState

  2009-08-26 20:54:18.979 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Current state of the VM management: disabled

  2009-08-26 20:54:19.071 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Implementation State of follow-up to the virtual computer for people with reduced mobility.

  Ability to root pool has changed to 1104 MHz / 521MB in 1104 MHz / 520MB

  2009-08-26 20:54:21.108 703F5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Remove hot memory not supported: newMemory: 64, curMemory: 128

  2009-08-26 20:54:21.110 703F5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Batch hot failed during the application of the individual changes.

  2009-08-26 20:54:21.113 703F5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Reconfigure is not

  2009-08-26 20:54:21.114 703F5B90 warning ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Exception that is thrown when the statement reconfigures: {(vim.vm.ConfigSpec)

  dynamicType = & lt; unset & gt;

  changeVersion = & lt; unset & gt;

  name = & lt; unset & gt;

  version = & lt; unset & gt;

  UUID = & lt; unset & gt;

  instanceUuid = & lt; unset & gt;

  npivWorldWideNameType = & lt; unset & gt;

  npivDesiredNodeWwns = & lt; unset & gt;

  npivDesiredPortWwns = & lt; unset & gt;

  npivTemporaryDisabled = & lt; unset & gt;

  npivOnNonRdmDisks = & lt; unset & gt;

  npivWorldWideNameOp = & lt; unset & gt;

  locationId = & lt; unset & gt;

  ID = & lt; unset & gt;

  alternateGuestName = & lt; unset & gt;

  annotation = & lt; unset & gt;

  files = null (vim.vm.FileInfo),

  Tools = null (vim.vm.ToolsConfigInfo),

  Flags = null (vim.vm.FlagInfo),

  consolePreferences = null (vim.vm.ConsolePreferences),

  powerOpInfo = null (vim.vm.DefaultPowerOpInfo),

  numCPUs = & lt; unset & gt;

  memoryMB = 64,

  memoryHotAddEnabled = & lt; unset & gt;

  cpuHotAddEnabled = & lt; unset & gt;

  cpuHotRemoveEnabled = & lt; unset & gt;

  cpuAllocation = (vim. NULL in ResourceAllocationInfo),

  memoryAllocation = (vim. NULL in ResourceAllocationInfo),

  cpuAffinity = null (vim.vm.AffinityInfo),

  memoryAffinity = null (vim.vm.AffinityInfo),

  networkShaper = null (vim.vm.NetworkShaperInfo),

  swapPlacement = & lt; unset & gt;

  swapDirectory = & lt; unset & gt;

  preserveSwapOnPowerOff = & lt; unset & gt;

  bootOptions = null (vim.vm.BootOptions),

  vAppConfig = null (vim.vApp.VmConfigSpec),

  ftInfo = null (vim.vm.FaultToleranceConfigInfo),

  vAppConfigRemoved = & lt; unset & gt;

  vAssertsEnabled = & lt; unset & gt;

  changeTrackingEnabled = & lt; unset & gt;

  }

  vmodl.fault.NotSupported

  2009-08-26 20:54:21.177 703F5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' State Transition (VM_STATE_RECONFIGURING - & gt; VM_STATE_ON)

  2009-08-26 20:54:21.180 703F5B90 warning ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Authentication data that are not available during activation

  Event 715: Reconfigured Win Vista on kudosiesxi118 ha-data center

  Change of State received for VM ' 32 "

  2009-08-26 20:54:21.598 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Time to pick up some config: 415 (MS)

  Task completed: error status haTask-32 - vim.VirtualMachine.reconfigure - 1422

  Add vm 32 to poweredOnVms list

  2009-08-26 20:54:21.694 703F5B90 warning ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Reconfigure the worker thread failed

  Problem in the virtual machine is in the power on State or I m doing something wrong?

  Can any body tell me where I m wrong?

  Rather than use a C string, try using the String object.  In my C++ sources generated the WSDL, the expected properties are string objects and references to string objects, not strings C.

• Problem restoring from Time Machine complex

  BACKGROUND:

  I never tried to do a restore from Time Machine.

  PROBLEM:

  2009 iMac internal drive is unreadable. *

  Previously saved on Time Machine before the problem of disk internal.

  Replaced the internal drive with 500 GB ssd

  When I try to restore the iMac via Time Machine, after providing the Time Capsule password, I get the following error:

  "There was a problem connecting to the server"Xxxx - airport-Time Capsule.local.""  Contact your system administrator.

  When I try to connect the iMac to time Capsule, which sees the iMac, after providing the Time Capsule password, I find myself in the same place above.

  When I try to use the Migration Wizard, same result.

  * I am told by the technology that has installed the new SSD, the system on the old internal drive is corrupt... but the data files are always accessible if the old drive is installed in an external enclosure that appropriate connector and wiring.

  Then... :

  1. How can I check the Time Capsule password?

  2. What is the answer to ' there was a problem connecting to the server "Xxxx - airport-Time Capsule.local." "  Contact your system administrator. » ???

  3. what other methods can I use to restore the backup?

  1. How can I check the Time Capsule password?

  The password is fully accessible using a soft reset.

  Press the reset button on the TC 1 s (that is, between 1-3 s).

  All passwords will be at default for 5 min.

  You can access the passwords via airport utility... No other router in the world, it is so easy and, therefore, has such low security like the Apple.

  

  Everything is revealed.

  

  2. What is the answer to ' there was a problem connecting to the server "Xxxx - airport-Time Capsule.local." "  Contact your system administrator. » ???

  The correct answer is $$ @ # $% * (! TC darn stupid..!)

  There's a good chance you have permissions issues. This makes life that little bit more difficult, but all will be revealed.

  I highly recommend you plug the TC by ethernet on the computer and do a full factory reset on it... and then set it to the top of all operating system has been installed on the iMac.

  No files are lost on the hard drive and you will delete all the other problems.

  So if you can't access the backup, it really is a permissions problem.

  3. what other methods can I use to restore the backup?

  Connect the original on the Mac disk using a USB key on his birthplace of SATA. See if you can get your files directly from the original source.

  You can also do something similar... Buy a USB... format correctly in Mac extended if it isn't already... and connect it to the TC... didn't check the TC on the disk. In any case, it's a good idea to protect your backup. You have to start no new backups on top of the old before you get your files.

  

  Plug this drive into the iMac and set permissions... you can not do this TB... only with the drive connected locally. You should then be able to access the backup.

  Migration is the best way to make the transfer, assuming that you have loaded a new computer specific OS...

  Just be careful of issues using a different user or the same user as the original computer.

  See here the instructions of Migration... which are a little outdated but show details much more than what apple has documented.

  http://pondini.org/OSX/MigrateLion.html

  See also questions still arise.

  http://pondini.org/OSX/MigrationProblems.html

• Problem updating my state machine, using the emg signal

  Hello

  I have problems with my code. My entry is an EMG signal that I gather from three different electrodes using usb 6008. In the program, I divide the signals and display them in a chart that is unique. What I want now is to read the signal, and if a signal passes a threshold I want an LED lights. This must remain lit until there is another signal that passes the threshold.

  To put it simply: "large enough signal--> lamp on--> stay informed--> enough large signal--> lamp--> stay off the coast and then start again."

  I tried a few different approaches, but I decided using a state machine. Now, the problem is that when the signal to enter the state machine the program crashes. I think it's because the table that I use to convert the signals does not update when I get my state machine, so the signal stops to come. But how to get around this problem? It is even possible to code what I want?

  I have attached the code. All the tips are welcome, I have been struggling with this for some time now.

  Thank you

  jenmich

  The problem is internal while the loop is run until the stop condition is true, but he never does a new Boolean entry. So that it remains for always in the same State. Remove the inner loop and put the shift register on the outer loop instead.

  You must also use a daqmx configures the element, and then set the properties of daq. The read.vi can be set to read a number of samples of each iteration.

  Also: you can expand the table to index for several items of output. If you want that element number 0, 1, and 2, you have yet to wire the index entries

• Problem with initialization virtual machine OlioDB

  Hello

  I have been using VMmark 2.1 six months spent for our performance appraisals. I recently started seeing the following error message when the harness trying to boot the virtual machine OlioDB0:

  Stafcmd: Tile0: FS copy the file: ConfigServer_OLIOjspDB.sh failed with RC = 22, STARFResult = STAFConnectionWriteUInt: error writing to the socket: send() RC = 10054:22

  I can ping the virtual computer, I can also ping using STAF (oliodb0 STAF-> pong ping ping).

  If I change the WORKLOADLIST in the vmmark2.config file so that it includes OlioDB, initialization is going through and I can see the virtual machine making initialization. But when WORKLOADLIST revert to the original, I get the above error message. I would appreciate your help to try to solve the problem.

  Thank you

  Amin

  Sorry, my apologies, I understood the question. I had another copy of the same virtual machine running on a separate server, which caused a conflict of IP address with the main VM that the test sought to initialize. I got rid of the copy and everything started to work very well.

• Tutorial problems on a virtual machine

  I try GF by following the documentation [1] and I found some problem when running the tutorial in vFabric_GemFire_701_b40235/SampleCode/tutorial:

  The tutorial on src/com/gemstone/gemfire/tutorial/storage/GemfireDAO.java defines the "localhost [port]". I changed it to 'ip [port]' (both for customers and peers) and recompiled. The tutorial still works well, but as soon as I try to start a client in another node (virtual machine) it stops working:

  1. When I run the peer that I can see it connect to the location (with netstat on the first host), but it takes a long time to connect (more than 10 seconds) and the data is not shared between peers (should it be shared on this case?).
  2. When I run the client it does not start, it throws a NoSubscriptionServersAvailableException after printing "could not initialize a main queue at startup. No server queue available". I've not found much info on this exception, does that mean?

  This tutorial should work on a different node for both configurations (client and peer)? I'm not sure of installing peer, but I understand that this should work for the customer.

  Thank you

  PS: There is no firewall or anything else limiting the connection between the virtual machines.

  EDIT:

  I also found the following:

  1. Start the servers and the Locator on $host1
  2. Launch gfsh on $host2
  3. Run "connect - locator = host1$ [$port]". " Gfsh appear something like this:
     Connection to the Locator to [host = $host1, port = $port]...
     Connection to the Manager at [host = $host1, port = 1099]...
     Connection refused to host: 127.0.1.1; nested exception is:...

  This exception relates to the connection manager? If so, why the host2 would try to connect to localhost? (Of course $host1! = 127.0.1.1)

  [1] vFabric Documentation Center

  OK, after chasing my tail for a little, I think I see the problem.

  I guess you follow the tutorial here: running the tutorial

  At the point where the tutorial asks you to run the client (part 5: Set Up cache server), you must configure a pair of cache servers using the command gfsh and not by the Peer class running. The initPeer method is not enough for everything to work. Specifically, you will need to have in place a CacheServer (sorry - I know that the term "Server" is overloaded way here). Anyway, the CacheServer is what it takes to run and that the client connects to. If you start a server with gfsh, a CacheServer is started automatically.

  If you want to increase the initPeer method, to start a CacheServer, you can add the following bit of code right after that the Cache is created:

  CacheServer cs = cache.addCacheServer();
  cs.setPort(0);
  cs.start();
  

  Here a CacheServer is started and will listen on a random port. You could define a port, but need not if your customer uses a locator of discovery.

  -Jens

• Network problem in the virtual machines on the same switch

  Hello

  I'm stuck on a problem with my small network.  I have an ESXi 5 host that hosts around 10 virtual machines.  The last two machines I install recently displayed an unexpected behavior.  I can't do a ping between the two machines or in those 2 VMS to anywhere else in the same subnet or other networks.  These two VMS, I am able to ping and have network connectivity.  Two of these virtual machines reside on the same vSwitch and belong to the same group of port as other machines.

  The configuration of these two VMs appears to be identical to all other virtual machines that work properly.  The two guest virtual machines running Windows Server 2008 R2.

  So far, I tried several static IP and DHCP assignments with the same effect.  (Including spend another virtual machine a static IP at work known to one of the computers virtual problem)  I tried to delete and re-create one of the virtual machines completely.  I also did an upgrade from 5.0 to 5.1 for vCenter, ESXi host and virtual machines, and I am always observing the same behavior.

  Any advice on what to check next would be greatly appreciated.  Thanks in advance.

  Greg

  I assumed that you have checked the windows firewall? Because they block default ping...

• Power problem on a virtual machine on a virtual computer.

  After nested VM configuration, the virtual machine can now turn on the power, but got another problem:

  Unable to connect to the MKS: failure of the search for host address for the host server B: host is known.

  Environment:

  Host of vSphere 4.0, introduced 2 vSphere 4.0 B and c. VMs and put on a B and c. cluster on host B, put in place a VM XP. After powering on the XP VM, got the above error message.

  George,

  This error usually occurs due to a firewall or DNS resolution problem. Make sure that your host and vCenter Server names can be resolved and take a look at http://kb.vmware.com/kb/749640 , where you have a firewall running.

  André

• problem with VCB virtual machine identified by &lt; unset &gt; is unknown

  Hello

  I have three ESX 3.5 in a cluster with an EVA SAN. When I do my backup, I get this message for some of my virtual machines. The majority of my backup work well...

  PrepareForBackup() could not prepare TermServer for backup, returned the error 16

  The virtual machine identified by & lt; unset & gt; is unknown.

  Exit code: 16

  Pre order is: "C:\Program VMware Consolidated Backup Framework\backupexec\Green-pre-backup.bat" green-Termserver TermServer - fullVM

  In Virtual Center, the name of the virtual computer is TermServer, the folder on my SAN is TermServer and all files, named according to the name of vm, have 'TermServer' in their name.

  Any idea?

  Hello

  I think that you have a DNS problem, you use - ipaddr in config. file for VCB?

  Try ping TermServer, you can resolve the name?

• Installation problem in the virtual machine Windows 98 sound card driver

  Hello, all.

  I have bad to configure a virtual machine for Windows 98 is running VMware Workstation 7.0.1 in a 64-bit Windows 7 host. Normally, the operating system installed without error, and then I went to install the VMware tools. No problem here, either. I am then went to the Device Manager and, as expected, the sound card is driverless and listed under "other devices", with a question mark and named "PCI Multimedia Audio Device. I don't care because I knew that Windows 98 had no driver for the sound card workstation provides. I wasn't expecting to see another unknown device, however, this one called "PCI peripheral system. As recommended, I went to the website of Creative and sought "PCI 128. I found three different drivers there for the use of the device with Windows 98. Then, I installed the newest one and hoped it would also take care of the other unknown device. However, what happened is that I had a blue screen to complain the vxd ctpci9x (05). The sound card is now recognised as "Creative Sound Blaster PCI128" but had an exclamation point on the corresponding icon and did not work - no sound was available. The other device is remained unknown. I also tried the other two pilots, but the results were exactly the same.

  I enclose two screenshots, one of the blue screen and the other from Device Manager after installing the driver.

  Help, please.

  Filipe Alves

  Take a look at this...

  http://communities.VMware.com/docs/doc-8060

  I don't know if it will work for a 64-bit user, but try anyway.

• Problem with turn the machine virtual (ESXi 3.5)

  Hello I just installed a virtual machine (Ubuntu 9.04), I also inserted an iso file (data store) in the options of cd/dvd.

  But when turn the virtual machine I get the following error:

  Could not power on the virtual machine: the verification of Admission of resource memory failure

  Please see for the guide to management of vmware esx server for more information about the settings for resource management.

  Cannot power on the virtual computer.

  How can I solve this problem? I want to just install some os, when turn it always gives an error.

  Thanks in advance,

  David

  Have a look here: http://www.jeremyroe.net/?p=102

• Is that a catastrophic problem with BootCamp / virtual machines or something else?

  Just had a catasrophic with BootCamp problem

  My MBP was running a bit lazy, so Apple gave me a few instructions on how to fix this, including linking the installation discs for the disk utility and empty all of my folders cache under OSX.  Don't know if any of this slow and crashing was something to do with the installation of the latest update to OSX

  All of a sudden when I came back to Windows in the usual manner, the installation of windows in the VM required activation. Needless to say I had to activate windows every time I spent Bootcamp in OSX and/or then the merger to get to Windows, I had to re-activate so finally that Microsoft is beginning to think that someone is to install Windows on multiple computers and telephone activation becomes a nightmare.

  But even worse, when I managed to understand what product key that I used for bootcamp and started windows, EACH CONFIGURATION MADE OVER A YEAR or so AND EACH SOFTWARE INSTALLATION HAD DISAPPEARED, I HAD!  Without a windows installation process, I've been frame with a soft-install windows desktop with all my lost favorites. Leading to an even bigger nightmare in the re-installation of hundreds of evidence hours of software.  He had two meager records to show that I was in the right place and that everything is not contained in another folder and a file or two, but I wonder if all these installation information is contained in a cache in the directory structure Active Directory OSX? If so, is it possible to identify the files or the folders in which cache directory must be saved?

  If this is the case, I never dreamed that something to do with the windows installation was contained in the OSX directory structure?  Surely if this is the case, there should be a strong warning on it?   Admittedlythe Windows Setup WAS a bit slow before the "incident", but I doubt that there is something deeply wrong, and in any event I ran just a fully updated Adaware and Spybot so this problem is probably not a virus. (I don't use email merge)

  If this is the case, is - can anyone identify records needing backup before you empty the caches under OSX?  I don't think THAT many here would have been recovered by the take a snapshot could it? (anyway, I could not in windows without this activation)

  FWIW, the only way I can see what is a matter of merger is if by chance you're under Fusion 2.0.0, which had a fatal flaw it would partition Boot Camp Virtual Machine to take a snap, and if you did not start in native mode again you probably will not notice immediately that all changes have been written in a disc rather than the disc file physics itself and then if we deleted the virtual Boot Camp Machine partition a situation such that you described could have similar results.

  Another thing to look at is C:\Program Files in the Windows directory and see if it contains all the applications you have installed once and if she doesn't then it's quite possible that you run Windows from a default registry hive, which of course contains no information on changes since Windows has been installed but you have really not provide adequate details on what you were in fact under the leadership of Apple technology to get where you currently are, so there is not much that I can offer.

• strange problem with a virtual machine in VC2.5 U3

  Hello

  situation looks similar to the following: we followed ping IP of the VMS system. If the IP does more (stop the VM, NIC, IP conflict or other problem), then monitoring sends an sms to the mobile.

  There is a virtual computer, lets call him VM1 that runs all the time (well - he was responding to pings, because any sms received, but we do not know if it worked ok, fair pings were OK). And suddenly, Monday morning, we got SMS that VM is offline (no ping response). If my colleague entered VC and saw that this virtual machine has been powered down. He put on this virtual machine, and he started working (operating system and also pings).

  And now we know what happened. In VC, when I go to the tab events and tasks VM, I see in TASKS 2 inputs display: 4.06.2009 - Migration between hosts caused by the DRS (COMPLETED), and the 29.06.2009 to power on a virtual machine (by my colleague). There is no task displayed between this period on the performance tab, just take a peek. He has failed on performance since May (until the 29.06). I do not know if this worked well (we not only got all the warnings, the pings are bad). So I am confused - where looking for this first cause?

  Second question, I have seen events spammed by custom attributes (take a look). How to get rid of it, or is it possible to browse this VM events history?

  Is it possible to confirm what really happened to this virtual machine?

  You can try to search in VC Journal, ESX and VM logs.

  But could be a very long job...

  André