LaserJet Pro M177FW MFP: Laserjet Pro MFP M177FW stuck in initialization

Similar Questions

• HP LaserJet Pro M1217nfw multifunctional stuck in initialization

  I have printer HP LaserJet Pro M1217nfw multifunctional and he is stuck at the step of Initilizating. I have tried rebooting printer several times but he won't anyther. Each light flashes for a few seconds and the lcd displays init... message for some time and then the cycle continues.

  My printer warranty expired 4 days ago and I can't buy a warranty either. Can anyone solve the problem?

  Your help is very appreciated.

  Thanks a lot for your help on above steps. There is no button GB LaserJet Pro 1217NFW. I tried all combinations of possible keys, but could not make the printer out of step initialization.

  Howerver error led me to the stage where I started the printer and then removed the Toner Cartridge. You may need to wait patiently for a few minutes. This you have printer off-cycle of initialization of the error. After which, I inserted the cartridge in and the printer started working. However I had to redo the connectivity wireless with my router after that.

  Until this printer and scanner are awesome to work wireless. Hope this helps someone who could face same issue.

• Color Laserjet MFP M176n Pro: Color Laserjet Pro MFP M176n stuck on initializing, Toner carousel will not go

  Hello

  Our Color Laserjet Pro M176n MFP is stuck at initializing, since the last time that the yellow toner cartridge has been replaced. After the replacement of the cartridge, the toner carousel turned, started making rattling noises and then stopped. She does after every start. It seems that there is something blocking the movement of the carousel, since I can't move it even manually as described in of many other forum posts on similar problems. Is there a way to access the back of the carousel to see if there is something blocking it from moving?

  Thanks for letting me know @samuelm.

  I don't see any other way to access the tonics. The printer will need to be repaired. Thank you!

• my Acrobat Pro download is stuck at 6%. I rebooted, but it stops at 6%. Suggestions please.

  my Acrobat Pro download is stuck at 6%. I rebooted, but it stops at 6%. Suggestions please I'm no computer expert.

  Hi dianac35645894,

  Please try the direct download link: download Acrobat products | Standard, Pro | XI, X

  Once its downloaded, you can install & serialize using your Adobe ID

  I would like to know if it works.

  Kind regards

  Nicos

• HP m225dw: my HP Laserjet Pro M225dw MFP is stuck on logo HP "initialization".

  Help!  I did everything suggested in previous posts, but my printer is still initializing mode.  Too bad I saw work scanner, but I was stuck initializing mode to try to solve all these problems.  Help, please.

  Hey @missmgm,

  Welcome to the Forums of HP Support!

  I see that you have some problems with your M225dw Laserjet stuck initializing. I can help you with that, but I'll need to know what troubleshooting steps you have tried first. Once I know that I will be better able to help you.

• M127fn LaserJet MFP Pro: Printer/Fax stuck on 'Printing Fax page 1'

  My business fax machine is stuck on a screen that says "Printing Fax Page 1". I tried to unplug it for 5 full minutes and it does not clear. How can I reset the printer/fax?

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Printer resets: What You Should Know by @Bob_Headrick

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  Please take a moment to read the privacy policy of HP to http://www8.hp.com/us/en/privacy/ww-privacy.html this privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online business is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

• My MFP HP Laserjet Pro M225dw is stuck on logo HP "initialization".

  I have the same problem, the printer will not complete the power on the initialization sequence.

  Gemini02

  It seems I owe you an apology... unless your last instructions work apparently.

  I had not thought that the printer would react on the network if it was still initializing.  To me that sounds like he is yet to start, but I guess that networks was on before it got stuck.

  In any case, this afternoon that I turned on the printer back, plugged into the USB on my HP Envy 17 t, downloaded the updated firmware June 2015, he ran, he updated the firmware of the printer and the printer restarted and got thorugh to the homescreen on the screen.

  Then I configured for my home wifi network and it attached to my router.

  Then I opened the EWS page and left the IPV6 and changed to static IP address.

  Jolly good so far.  Now I can try the electric bike on the printer several times and see if it remains functional as expected.

  

  # 1 power cycle: OK

  Cycle 2 # power: OK

  # 3rd power cycle: OK

  power cord removed 15 minutes

  # 4 power cycle: OK

  So now, it seems to work.  I can't understand why the HP Chat person said if go, they could not help, wouldn't do anything.  Made me give up and replace it with a brother who works really well and seems a lot more elegant than the M225 although it has better file (print speed, duplex scanning) and still has all the other features of the M225... and it cost less than $ 150.  Don't know why HP continues to be #1 with brother beating develop products and price, and I must say that I am impressed with their email ollow-up top and providing support tools and a willingness to make me happy... so better service than HP as well.

  Hmm, I guess I have enough negative look on HP.  Sorry if this colors your enthusiasm for HP.

  Thank you for your persistence in getting stares upward.

  Kind regards

  ... Patrick

• M177fw MFP: MFP M177fw stuck at initializing

  «Hi there, then put in place the printer by the book / manual.» I am able to scan documents using the HP software, but I can't print anything. The touchscreen is stcuk to "initialize". The M177fw and the laptop are connected in WiFi.

  When I click on the 'status' button of supplies, the text on the touch screen becomes to XYZ color, but this task is never ending. Any number of reboots always shows "initializing". Please let me how can know I do this printer print documents.

  Thank you

  T HP

  Hi @T-HP.

  Thank you for joining the HP Forums!

  I noticed your post on how your HP Laserjet M177fw printer is stuck on initializing. And I'm happy to help you!

  Please first try a hard reset by following the steps in this post, How to perform a hard reset, by @Rich1. It is important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector.

  If the hard reset does not solve the problem, I also have you sent for a factory reset instructions in a private message. If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  We'll see what happens!

• HP LaserJet Ent.MFP M725f: Stuck 'Initializing 30' on HP LaserJet Ent.MFP M725f

  Hello good day...

  CAN anybody face this problem with the HP LaserJet Enterprise M725f MFP printer, printer is not continue starting and blocked when processing of the

  "Initializing 30."

  Thank you in advance for those who can help me solve this problem

  Please see attachment AutoForm caught the screen of the printer.

  Thank you

  

  The first step would be to go into the pre start menu and do a partial cleaning.

  The partial clean will wipe away the active partition, including data on this subject and then once the printer starts it reload the backup partition partition.

  To enter the pre boot menu power cycle the printer and press the HP icon when 1/8 appears below.

  You can see also a full clean option that will wipe the hard drive and the machine will have to be recharged from the USB firmware before it will work again. You do not use this option unless the partial clean does not help.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• HP Color Laserjet pro mf m177f: stuck on Intializing

  Hello from the Germany,

  Unfortunately my new printer is stuck on initializing. I read a few solutions but they didn't work (hard rest) and I also turn around the cartridges for example black on the front but the printer was still saying that I should turn black to the edge. I don't know what to do now.

  I hope you can help me and sorry for my bad English

  Sincerely

  Firstly unplug everyting the printer except the power cord and turn on the printer.  If it comes to prepare this way, you have a bad printjob causing the printer to initialize time and time again.  If still the same problem do reset below.  If this does not work, then your trainer is bad.

  The NVRAM initialization
  Perform initialization of the NVRAM resets the settings and the following information:
  ● all the menu settings are reset to the factory default values.
  ● all location settings, such as language and national and regional, are reset to zero.
  ATTENTION: All integrated network settings are also reset. Don't forget to print a page of configuration before
  restore the default values. Make a note of the IP address that is listed on the Jetdirect configuration page. You could
  you want to restore the IP address after the NVRAM initialization.
  After a the NVRAM initialization, reconfigure all computers that print to this product. Uninstall and
  then reinstall the product on computers software.
  1. turn off the product.
  2. press the right arrow key. Hold this button you turn on the product.
  3. where a Permanent init storage. appears on the screen, release the arrow button to the right.
  When the product has completed the NVRAM initialization, it returns to the ready state.

• LaserJet M1536dnf print queue stuck

  Does not print the LaserJet Pro M1536dnf-order 3 days ago - stuck in print queue of waiting.

  Windows 7 (64-bit).

  No error message - yellow triangle.

  Printer will copy and run the config report that has the correct IP address.

  Print and scan doctor - he simply deleted document but problem persists.

  Have followed all the 10 suggestions in print and Scan Doctor (including uninstall and install with the driver 'later' but still no progress.

  Sprig12,

  Congratulations! ... and glad to hear that you are back on!

  Don't forget to let me know if you need help most.

  Also, if you would be so kind to mark it as an accepted solution so that others may be able to easily find this thread if they have the same problem that would be greatly appreciated.

• Satellite Pro S300 EZ1514 - could not initialize Solid State Drive (SSD)

  I have a Satellite Pro S300 EZ1514.

  Recently I bought a SATA II 64 GB SSD to replace hard drive current cavalry. I first tried to install XP with SATA drivers rationalized in.
  The installation process recognized the SSD and has the original file copied to it, but when it restarted to continue the installation process the system wouldn't boot from the drive.

  Then I tried to install Vista Business 64 from the recovery disk came with the laptop.
  After launching the recovery disc, the said installation process the hard drive has not been initialized and click OK to initialize now.
  After clicking OK to initialize the system not restarted that at the end pointing upwards on the screen telling me to initialize the hard disk.

  Then I tried initializing the disk manually on my desk.
  Plugged into my office, initialized and formatted in NTFS. Plugged into the laptop to retry recovery Vista. And once again the same screen appears. Reconnect the disk SSD the Office to see that the player has is more initialized and was to be initialized again.

  Then I gave up and installed the SSD on my desktop under master boot and installed perfectly fine with XP. For testing purposes I then handed the ssd with XP pre-installed in the cell to see what happens. To my dismay the computer laptop would not boot and on top of that when I put the SSD drive in the desktop only to see that the drive has been initialized is no longer and I had to reinstall XP again.

  Conclusion:
  It seems that the Satellite Pro S300 series is not easy SSD and just post it self off Initialise the Solid State Drives.
  This seems to be the logical conclusion that the SSDS works perfectly well on my desktop and the laptop is fine now with the old turntable hard back in.

  Does anyone else have this problem or a solution?
  I would still put the SSD in my laptop to save energy.

  Hello

  The laptop is equipped with common serial ATA HDD.
  The SSD might work, but is not a must.

  There are several different SSD on the market and a problem of compatibility of equipment can always happen.
  Maybe an other SSD would work properly, but these are just suggestions.

• Satellite Pro C850-1FN stucks in the form of preparation of auto repair

  Hello

  I have a Satellite Pro C850 1FN and for some reason it stuck in a display of automatic preparation for startup repair. He will be sitting with the text on the screen, and after 8 minutes bluescreen shows then talk about a problem and then re boot PC.

  The cycle then continues.

  Any ideas greatly appreciated.

  Hello

  It looks like the repair automatic isn t possible.
  Have you tried another HARD drive recovery option?

  The HARD drive recovery process would begin the new system, but also the driver installation and would set the laptop back to factory settings.

  I think that if the system repair isn't possible, your next step should be the HARD drive recovery.
  In case the recovery of HARD drive would not work too, then you should use the recovery disc.

• CM4540 MFP - printer is always initialize

  Hello
  I have a clear drive to 100% in the screen for model cm4540 mfp but it stops there and will not go to the start menu... I left it for 3 hours, but still it's the same thing, it gives me the same message 100% clear disc. I tried a lot of city to close and plug it on and wait a little bit and start over, but I'm on the same question... can you help me with this question...

  Hello
  I tried 3 different usb drive it worked properly and I downloaded the firmware to the printer. The printer is now on a ready state. Thanks for the information and for your help.

• Re: Satellite Pro A200 - key stuck FN

  Hallo,

  I installed my vista Ultimate on my new Satellite Pro A200 but FN key does not work after you have installed the Package of added value (they work again after uninstallation). In addition to, there is an error of invalid series in support of cards Flash Utility Setup. Toshiba said, I need to get the Toshiba vista home system - I am not satisfied with this response.
  If there is one body, who have the selfextrated support of Flash Cards Utility Setup files?

  Another point: someone knows how to set properties of fan? The cooling system works too hard for a few seconds by the temperature of 33 ° C CPU. Is this software like SpeedFan or an upgrade of the BIOS is?

  Caio ~ Daniel

  Post edited by: ADMIN

  Hello Daniel

  I installed Windows Vista Ultimate on my Satellite A200 successfully several times. Can you please tell me what you do exactly? Did you CLEAN Ultimate installation or just the UPDATE to Vista Ultimate?