HP Laserjet Professional P1100: HP Laserjet P1100w

Similar Questions

• LaserJet P1100: Laserjet Professional P1100?

  How to make a copy with my Laserjet P1100

  Hello

  The P1100 is a printer only. meaning he can't make a copy because it is not a copier or a scanner

• HP Laserjet P1100w

  My LaserJet just be put back because my windows is damaged and needed to be reinstalled.

  Now, when I request a printed page, I get 13 or more on the same page.  I went through all of the instructions that come with the printer and on line stuff, but I can ' t find something for this problem.  Help Bouffy

  Go to devices/Printers in Windows 7 or Printers in Vista - made folder right click on P1100w

  In the drop-down menu, right click on printer properties

• Configuration without wire - HP Laserjet P1100w with Mac OS 10.7.5

  Ok

  I have the most recent updates of software through my Mac. I am connected via USB but unable to connect via Wifi.

  What is going on?

  Hi @rkcampbell,

  By your post, I see that you cannot set up the printer on the wireless network. I can help you.

  Make sure that Safari is set as default browser. (sometimes the SAP will not open if it is not set by default)

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Reset the printer first to clear the previous network settings.
  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  (hold down the x key and when the printer makes a noise to let go of taken)

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet 6500)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  Check your network encryption type.

  Go, go to the Apple/system preferences/network/click on the button advanced/double click on the name of the network. (watch the WEP or WPA)

  Check the network password.
  In the Apple menu, click on Go, selection of applications, utilities, Keychain Access, double-click the name of the network,
  Check the show the password box, type your Mac password to see.  (some networks have a password shortcut configuration)

  And then double-click the P1102w printers & scanners.

  Open the utility.

  Click Printer Setup.

  Click Config to HTML.

  This should open the Web built-in to the printer server.

  Click the network tab.
  Click on wireless in the list on the left.
  Under Communication Mode, click Infrastructure.

  Select your network SSID from the list of available network names (SSID), then click on the< button="" so="" the="" network="" name="" moves="" over="" to="" other="">
  In the Safe Mode pop-up menu, under authentication, click WEP, WPA/WPA2 or open. Your selection depends on which wireless security protocol using your network.

  Make sure that you select hexadecimal or alpha according to your password. (very important)

  Apply the settings.

  In the confirmation box (changes have been registered), click OK.

  You should get a solid blue light on the printer shortly.

  All we have to do is remove the USB driver and add the network driver.

  Click on the Apple.
  Click on System Preferences.

  Click the Printers & Scanners.

  Select the printer, and then click the sign - to remove the printer. (USB driver)

  Unplug the USB cable.

  Then click on the + sign and select the printer from the list and click Add. (Hello P1102w)

  Test the printer.

  If you have problems with the opening of HTML configuration, then perform the following steps:

  Close all applications.

  In the Apple menu, click on Go, computer, MAC hard drive, library, Printers, HP, LaserJet, click the folder for your printer, click browser EWS / config HTML, click on the network tab, click on wireless on the left and fill out your information. (Make sure infrastructure is selected) Apply the settings.

  Then, unplug the USB cable and remove the USB driver and add the network printer. Make sure that this shows that the name of the printer.

  Test the printer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• Good old LaserJet Pro P1100w cannot even find a wireless signal - flashing.

  Well, forgive me - I'm not a very savvy computer user, but I spent three hours with all the 'Assistant' and 'Doctors' and reading the forums and may not know what is happening with my trusty LaserJet P1100w.

  It appears nowhere on my laptop ASUS Windows 8 OS under "Devices and printers" and maybe I accidentally deleted (or another user on the family computer did!).  So I unplugged, then plugged into it, and unfortunately, blue light keeps looking for a connection - I suppose that this isn't to find - and I don't have a USB cable or the original CD (although I have downloaded all the drivers/software online).  My ASUS can't detect the printer at all.  But I guess that if the printer is able to connect with the wireless router and had a solid blue light that wouldn't be a problem.

  Any suggestions?  I'm not quite sure of how to help the printer go flashing blue light to find whatever it is, he needs and then second stage will probably be easier - find the printer on my laptop ASUS.

  Thank you!!

  Melissa H.

  Oh no, good Sir. The printer works beautifully. I don't have to do anything. I thought about it before you post on why I couldn't print. So after all that I managed to do without knowing it, create a link that has bypassed the router altogether, I print perfectly.

• LaserJet P1102w does not connect to WIFF

  This is a new printer right out of the box and he can't make it work wireless.  I followed the instructions to install the printer, but the HP Smart Install says its downloading the software, said over.  Is not further in order for me to set up the wireless part.  My computer does not have a CD, so I down loaded the disc and when I start it, it goes into a film on how to unpack the printer, etc., any wireless configuration.  I tried setting up this printer on another computer and get the same problem.

  Hey there @paxton2644!

  Thank you for posting back!

  I suggest all initially set the printer to the wireless settings and try again the wireless installation.

  To restore the default settings of the network:

  1. turn off the product.
  2. press in and hold the wireless and the Cancel button and then turn on the product.
  3 hold the keys down until all lights flash in unison, and then release the keys

  If you already have the software, you can check the configuration wireless in the HP folder.  I suggest to try the Wireless Configuration before you uninstall and reinstall.

  To access the Wireless Configuration:

  1. connect the device wireless to the computer via a USB cable.
  2. click on the Start button and then click on the programs or all programs.
  3. click on the HP menu item and then click the printers HP LaserJet Professional P1100 series
  menu item.
  4. click on the wireless settings menu item.
  5. follow the on-screen instructions to configure the product to print on a wireless network.

  Before installing the software for your printer, you must uninstall the old software.

  To uninstall the software HP click here: uninstalling the printer software

  To download the LaserJet P1102w software, click here: LaserJet P1102w drivers

  If you bought the printer less then a year ago, then it must always be within the 1 year warranty and you should not pay for support.  To make sure you got the right number of HP telephone support I can provide here.  Our technical support is 1-800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• INITIALIZE A HP LJ P1102W HD

  someone at - it the procedure to do this or reset the default settings from the factory would also help?

  Thank you

  POLO33

  Hi POLO33,

  I see by your post that you would like to be able to reset the printer.
  I can help you with the reset of the printer.

  This information is provided in the manual on page 31. LASERJET PROFESSIONAL P1100 printer.

  Restore the default wireless settings:

  1. turn off the product.

  2. hold the wireless button and the Cancel button and then turn on the product.

  3 hold the button until all lights flash in unison, and then release the keys.

  If you need assistance, please let me know.

  Good day!
  Thank you.

• HP P1102W new router

  I changed my router, the password and the new name.  How to upgrade my printer with the new info. If I can print?

  Hello

  You can use the software to reconfigure the wireless connection:

  Enter the start > programs > HP > HP LaserJet Professional P1100 printer > Wireless Setup.
  Follow the instructions on the screen to configure the product to connect to your wireless network. You will be prompted temporary connect a USB in order to configure the product.

  Kind regards

  Shlomi

• Status: \t10.0000 MEMORY ERROR POWER + can not install printer

  Hi I have a printer HP Laserjet P1102w. I have changed my router and my laptop and now am not able to install the printer on the new laptop and router.

  I tried to install from HP Smart setup via a USB cable. When I do that, I get an error message saying that the installation failed and advising me to turn off the printer, turn it back on and try again.

  I tried to reset the printer, the default settings, and then print a test page and using the IP address to access the printer. An error message says:

  Status: SUPPLY 10,0000 ERROR MEMORY

  I tried without taking this into account and going to the HP Smart Install tab, and setting up a printer in this way. When I did, I get a similar error message before saying that the installation failed and advise me to turn the printer off, turn it back on and try again.

  Could someone advise me please on what to do? Should I spent trying to get the installed printer, and then try to correct the error memory power or correct the error memory power and then try to install the printer? I am a little hate to buy a new toner cartridge, if after doing this, the printer may not always settle.

  Thanks in advance,

  Paul

  Very good information.  Since this printer is having such a bad plug try to reset the printer first.  I have provided a link on how to restore the default printer. I had a similar with this printer problem, until I installed a very recent firmware update.  This is how I was finally able to do so, install and connect:

  1. Clicking on the tab drivers and software at www.hp.com/support and typed in my name of the printer (P1102w Laserjet) and press the Enter key.  Then, I chose my operating system (you will need to know if the type of your computer system is 32-bit or 64-bit or I would provide a link).
  2. As part of the installation of the Driver and product, I installed the drivers and software HP Laserjet full feature and proceeded to the installation using the USB key to the wireless configuration.
  3. After the test page printed, the printer disconnected from the network, so with the USB cord still attached, I went to the same download page and install the latest firmware update: Version 20130213, which went very well, I might add.
  4. Then, I went on the Start button and select all programs > HP > series HP Laserjet Professional P1100 > Configuration Wireless and finished get my printer connected to my network.

  I strongly suggest the update of the firmware.  I hope that this information helps out you.  Try the above steps and if this does not work please let me know.  I look at the error message once you're able to get installed it.  Maybe when you restore the default printer you can restart the computer if you are running low on available memory, where the error message.

• P1102w turns off after a while. Win 7 in settings is set to never off

  OK worked before the firmware update

  Hi @Hugh131 ,

  I see by your post that the printer turns off, even if it is set to never in the print driver since the update of the firmware of the printer. I would like to help you today.

  The manual indicates default automatic setting of the time before is at 5 minutes. Page 55 of the manual. LASERJET PROFESSIONAL P1100 printer. But there is also a setting in the driver put it forever.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Power cycle the router, restart the computer and the printer.

  Try again.

  I would say to uninstall and reinstall the printer software, just in case where updating of the firmware affected this setting.

  Uninstalling the printer software.

  Install the latest drivers from this link the HP LaserJet Pro P1102w printer drivers.

  If you still have any questions, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Good day!
  Thank you.

• LaserJet Pro P1100w: Then my LaserJet Pro P1100 AirPrint phone without wifi connection?

  My LaserJet Pro P1100 AirPrint phone without wifi connection does

  Hello

  iPhones and AirPrint works only via a wifi connection (no bluetooth or other options will work) without a wireless connection any (direct or normal wifi), you will be unable to print wireless.

• HP LaserJet Professional M1132: HP Professional LaserJet M1132 multifunction cannot scan on macbook pro

  Hello

  I use HP Professional LaserJet M1132 multifunction. I have already installed the driver and I can print document with that now. But I can't using the scan function. When I click on Preferences system-> printers and Scanners-> choose the printer-> click Open scanner, nothing happened.

  As you can see in the photo, the "Scan" button is disabled.

  What should I do now? Are there additional software or I need to install driver?

  Any help is appreciated. Thanks in advance!

  

  Hey @phuonglm94,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with scanning your computer Mac OS x Laserjet M1132 10.11 for the printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. If your printer is connected by USB cable to your Mac, delete it.
  2. Close any programs you have open.
  3. Click on your Apple icon, system preferences and printers and Scanners.
  4. Hold down the CTRL key and click the icon of your printer on the left.
  5. Click on reset printing system.
  6. Restart your Mac.

  At this point, you should be able to scan. If you are unable to scan, your operating system is having a problem with its TWAIN drivers. The next step would be to contact the Apple support by clicking this link.

  Please let me know the results after following the above. If you are able to scan, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Problem HP Laserjet M1212nf Professional USB

  Hi, please help, I bought this HP Laserjet M1212nf Professional about 7 months, I rarely use it. It worked fine before today. Recently my computer laptop windows 7 does not yet recognize. He repeated on the "peripheral USB malfunctioned". I've uninstalled and reinstalled the software, I also connected with the laptop from a friend and I used another cable, still no response, no connection. What I can do. help with goodness, its urgency. Thank you
  

  Hi kluzi,.

  Yes, your printer has a warranty of 1 year on it no matter if you registered or not. Call the number below to speak with a customer support representative.

  Nigeria
  (01) 271 2320.

• Dell XPS 8500: LaserJet Professional P1102w - problem printing envelope

  Recently I had to change my router, which has led to this wireless HP printer reset, and now the envelope printing function does not work.  The broadcast for the envelopes window is in Microsoft Word, but when I click on print, an error message appears in the status area of monitor that says: "this document does not print" and a red dot on the printer flashes.  Any ideas on what settings to check/change if you print envelopes works again?  Thank you!

  Hello

  You may need to reinstall the printer driver on the PC, like the printer probably got a new IP network with the new router.

  http://support.HP.com/us-en/product/HP-LaserJet-P1100-Printer-series/4110394/model/4110306/drivers/

  Alternatively, you can just go to your control panel > devices and printers > add printer and select your wireless printer, since you probably already have the driver on your system.

• HP Laserjet M1212nf MFP professional

  I have a HP Professional laserjet M1212nf MFP. my computer is connected to the network and my printer eprint as well. I am trying to open my eprint printer Hp web services but it does not open, but it is re - lead me www.hpeprintcenter.com.

  Please how can I activate my eprint printer HP web services?

  Thank you

  I await your response.

  Hi philip24,

  Welcome to the Forums of HP's Support.  I understand that you get redirected to HP ePrintCenter trying to enable web services for your Laserjet M1212nf printer.

  Your post leads me to believe that your printer needs a firmware update, so I've included the document Getting the latest Firmware and updates to the product .

  Once the printer firmware is up-to-date, you should be able to get operational web services. If this isn't the case, please let me know at what stage things are ugly and the content of any error message.  Also would you please let me know which operating system you use on your computer (whatsmyos.com)?  Thank you.