HP load problem (SOLVED)

Similar Questions

• Camileo load problem (solved) and a general question!

  Hi all!

  First of all, I was going to ask for help as to why the Camileo S10 wasn't supported (the orange light was not blinking) and I had seen a few people with similar problems.
  The solution?

  Give the contacts of the battery clean.
  The sticker of insulation that comes on it must leave some kind of residue on it, and just avoid the charges. [Now it blinks far fortunately:]

  So my general question was, is it possible/desirable to use the camera on the network?
  Instead of constantly drain and recharge the battery during long shoots, I prefer to leave it plugged!

  Thank you very much in advance!

  Paul

  Hello

  I think that the handling of the battery is always the same, regardless of what product it is
  From time to time the battery must be recalibrated.

  This means that the battery should be completely discharged and then after you need to load it again until the battery could reach 100%

  I do this with all my batteries; laptop battery, laptop battery and battery of digi cam.

• Camera not properly initialize since v. 4 - PROBLEM SOLVED

  I'll preface this with have not only I've done several ' resets all the ', I deleted all the files from camera loaded on the SD card that have been created in v.3 and after 'Reset All' was performed manually via the menu and re configure all my preferences instead of loading old sound of the SD card.

  With that of the road, my problem is 80% of the time that I start the camera with power supply or a battery, the unit freezes at the Sony logo on the submenu. Power must be cut (which has no effect), power removed/disconnected, wait the Sony logo screen disappears and then try to restart. It usually takes 2-4 trys until the camera manages to move to the "Sony" screen and performs full initialization upward. IM dreading the day that this happens on a job and the camera completely fails to start completely. I NEVER had this problem with all previous firmwares. Anyone else having this problem and any advice on how to solve this problem?...

  Side note: my first F5 made the day I brought home from Abel a year ago, but in this case the start of Sony screen wouldn't go away no matter what I or Able tried to do. They talked to Sony and said send it back, fortunately Abel gave me a new on-site and I never knew the question once again. Until now...

  UPDATE: May 30 - problem solved.

  Well it seems that everything has been healed. I went to Sony to Teaneck service yesterday and they replaced "PCB of HIF - 64" or, as we have been referring to him as the SDI card. Also updated the wheel to stop ND, design much better. Engineers, that I talked to had seen cameras having the same problem as me and reinstallation of the map is the apparent cure. Spoke with a Senior technician there for a good 45 minutes a range of topics. Was'nt able to get new information out of him, but he was very helpful and insightful no less. He said that the Japan is aware of the issue of sensor grid that some people have, but they have not been told that the solution will be even.

  Thank you Alister, I'll give them both a go and communicate the results.

• HP Pavillion G7 loading problems

  Hello all, my laptop G7 has been done more slowly and now there is a problem loading as it won't. I tried to remove the battery, restart and the only thing I get is the HP sign and then it shows the loading circle and then the screen goes gray. The keys on the keyboard sign up if you press them, but nothing doesn't appear on the screen. Any ideas?

  * Click on the star of CONGRATULATIONS on the left to say thank you * if your problem solved

  Make it easier for others to find solutions by checking a response 'Accept as Solution' If this solves your problem already

  Thank you

  K N R K

  I work on behalf of HP

• Satellite L300 - boring loading problems

  Hello world.

  I've got my Satellite L300 nice for about 23 months now, and I absolutely love it.
  There is just one problem: my PC is not loading properly. There are always about a 1/50
  lucky, I have to play with the inputs and output for all 5-10 minutes each
  I plug it in time. I had this problem before (about two months ago) where I sent it
  Back to the store and they fixed. I was able to pick up there is still almost a month
  and everything worked properly again.

  It's really, really frustrating and I hope there is a solution simple sorta.
  Anyone who is familiar with this problem and to know what exactly is the problem?

  Thank you in advance.

  This kind of technical problems, there is no simple solution.
  If you have a serious issue with load problem, it is probably related to electronic power supply and it must be checked by authorized personnel only.

  Tell me but honestly: what can you fix these problems?

• Satellite L30-10 x loading problems

  I have my laptop at the moment load problems and I don't know what part of the computer is the problem.
  I have the cable but it only works when the portable operating system on a certain position then so I try to move it, it stops charging...

  My cable is not in perfect condition, so that's what I think it is but I can't and won't replace the erroneous part...

  Only other things I can think of are the port where you plug the charger or the battery

  If the cable is damaged, you must stop using it and replace it as soon as possible. It could and cause damage to the laptop or home computer.

• When the error is problem solver, I go to the store?

  When the error is problem solver, I go to the store?

  Please I need help English or Spanish

  If there is an error that you cannot solve at home, then yes the Genius Bar or authorized Service Provider Apple would be a good place to go. What is the error specific are you?

• Problem-solving with HP2311x and ProBook6455b

  Hello

  I have a problem-solving with portable HP2311x and ProBook6455b.

  Maximum resolution is 1600 X 1200

  Current display driver is ATI Mobility Radeon HD 4200

  However, my HP monitor supports the 1920 X 1080.

  I used only the external monitor without using the laptop monitor and the maximum resolution is always to 1600 x 1200.

  I also downloaded the drivers recommended by HP, but it does not solve the issue.

  I also tried with the drivers provided by AMD, but I get still more low resolution (1280 x 768) because the driver software detects is ATI Mobility Radeon HD 4250

  When I try to use the AMD Vision Engine Control Center stops unexpectedly

  I have conteacted
  Portrait Displays, Inc..
  http://support.portrait.com

  But they suggested me to contact HP because they were not able to solve my problem.

  Any help will be appreciated.

  Kind regards.

  I understand that you are not able to use the full resolution of the monitor even when the screen of the laptop is out of the question.

  Ensure that the system has the right driver for the monitor found here.

  You can try the support business forums as it appears that the two components are business models.

• problem solved

  problem solved

  Also the advice given above, I also would ensure that you have the latest drivers for touchpad

  http://support.Acer.com/us/en/product/default.aspx?modelId=2192

• Installations of updates of Windows problems solved

  delete it please: problem solved.

  Why did not change your windows update settings to exclude recommended updates installer as are updates important?

  

  Use them,

  

• Windows 10 and Lightroom problems solved.

  Windows 10 and Lightroom problems solved.  I want to update my PC system and install LR 6 (nonCC)

  Any advice before proceeding would be appreciated.

  Thank you.

  Len

  Atul, I thank you for your response. I had read a lot of comments referred to as before posting my query. Not too encouraging - used LR 2/3/4 with operating system previous Windows without problem. Will sit on the fence a little longer on this one.

• I bought a new carmera and Photoshop CS4 camera Raw can not read the ARW files.  I downloaded the lateset update but still can not read how can I get this problem solved thanks

  I bought a new carmera and Photoshop CS4 camera Raw can not read the ARW files.  I downloaded the lateset update but still can not read how can I get this problem solved thanks

  Hi tonyf,.

  Greetings!

  Each device is compatible with a minimum version of camera raw.

  Here is the complete list: https://helpx.adobe.com/camera-raw/kb/camera-raw-plug-supported-cameras.html

  Please check if you have this version of the camera installed which include your raw files.

  It would also be that your photoshop will not have to install this version of camera raw as its very old.

  In this case, you can convert your raw files to DNG and can use it.

  To convert the files to DNG, you must download and install the DNG Converter.

  Here is the link:

  Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows

  MAC: http://www.adobe.com/support/downloads/product.jsp?platform=Macintosh&product=106

  Concerning

  Jitendra

• [Problem solved] On the display screen does not not on T60

  I have replace my xp with Vista Business.

  All the drivers are installed. But on the screen display is not working properly. Display nothing when I press the volume high/low/mute key. However, other buttons like Fn + F5, Fn + F3 appear on the screen.

  Someone knows how to fix this?

  Thank you very much.

  problem solved.

  Looks like I need to install a Lenovo System Interface driver. It's just for users of an ATI graphics card and nVidia users don't need.

  Thank you very much.

• Help with loading problems

  One day I opened dreamweaver and noticed something funny, it took longer than usual. I waited for about 10 min. and still don't have dreamweaver. I tried blocking (with installer) and put it back even. No luck. What is going on. In addition, I have the rest of the studio 8 and it works fine.
  
  Help, please.

  Dude, thanks a lot. I think it was my computer all in the cache, because it took forever.

  problem solved.

• My firefox is broken, doesn't load pages Web correctly, already filled every regular 'problem solving' steps, what then?

  Some pages Web opens in Firefox, but most will not. My google search bar is broken, and my bar of yahoo search that shows only the broken pages. The adresse_web bar is very little and will open just a few sites. Some who does not include google, wikipedia, youtube, and yahoo.

  I have already completed most of the steps of the 'fixing' issues, including reset, start in safe mode, uninstall and then reinstall remove completely. I added firefox to my firewall allow list. He has done nothing to help the issue, but lost all my favorites, add ons and preferences. I'll have to use google chrome just to get help for firefox.

  Even in safe mode, the problem persists. What should I do to get my firefox working again?

  Thanks for the advice, however another user on the forms of support has been able to provide assistance which solved the problem.

  I would add that by removing and deleting all the data on my computer with firefox, it essentially removed everything that you suggested and also himself removed from my firewall (which I checked before and after). The resettlement of fees and changing the firewall/antivirus do not fix the issue.

  Speed

     Posts: 683
     Joined: April 21st, 2011, 9:03 pm
  

  Post published today, 10:13
  Try to clear your DNS cache: https://help.ea.com/uk/article/how-to-flush-dns-cache-for-windows

  If this does not work, try changing your DNS server. It was the only thing that worked for me when I met similar problems.

  Clear my DNS Cache memory and restart the computer immediately solved the problem. I hope that this information is useful in the future to diagnose and repair problems.