HP mini 110-3500: no VGA connection more after installing Linux 16.04 LTS

Similar Questions

• Problem updating Mini 110-3500 2 GB RAM

  A few days ago, I bought a HP Mini 110-3500 netbook (more precisely a 110-3538TU / LD928PA) and separately, I bought an upgrade to 2 gigabytes of RAM to another bank. So far I had been focused on the problems of screen resolution but tonight, I finally installed the RAM, but the machine could not be started. I tried three times and he has always worked with the original 1gig but never with the upgrade to 2 giga.

  In the store, I noticed that the display Mini 110 used RAM Kingston, so I took care to buy the same brand. I turn the machine on, I brought was not Kingston but RAM Samsung. I have included a picture of two RAM sticks.

  Is - this Mini 110 module is known to work only with certain brands of RAM? I have somehow the wrong type of RAM? I have to change something in the computer so that it can recognize the extra RAM? Is there a brand recommended RAM should I buy instead?

  

  Unfortunately, I didn't get to try the Kingston RAM on another machine. I tried all my local chain computer stores and MOM & dad computer Chinese import stores and the only other brand available was "Amicroe" resembling a brand generic cheapo, perhaps re-marked. Normal price was AUD $119,96 but Harvey Norman gave me for $60, $5 more that I had paid for the Kingston RAM. I was skeptical, but it was working good in weeks.

• HP Mini 110-3500: HP Mini 110-3500 Bios Admin password

  Hello!
  
  I'm working on laptop HP Mini 110-3500 of my cousin and I need to enter the Bios. It doesn't have all of the paperwork that came with the computer.  How should I approach to try to understand what is the BIos Admin password?  This is the best place for this or I have to send HP directly?
  
  Any help will be appreciated.  Thank you

  Hello

  You can use the link below to generate the BIOS password reset key. Enter the system code stop or the serial number of the device to generate a.

  You can:

  1. use the unlock code you generated to enter BIOS

  2 disable all passwords that are enabled in the Security menu of BIOS.

  3. If the request for current password - enter the unlock code

  4. for the new password, simply press the ENTER key

  5. repeat the same thing to check the password column.

• HP QuickWeb on a HP Mini 110 3500

  I downloaded the HP QuickWeb on my laptop of 3500 HP Mini 110 running under Windows 7, but after installation a message said that the program is not supported by my computer. Can someone advise?

  Hi NutoHP,

  Welcome to the HP forum!

  I understand that you have downloaded HP QuickWeb, but when you tried to install it you have received the message that it is not supported by your computer.

  If you have lost HP QuickWeb and try reinstalling from a download, you indicated that you are not able to do.

  HP QuickWeb is configured individually for each device. You will need to reinstall recovery. Here is a document to help you. Set up and use the Applications HP QuickWeb. Please note the section reinstall IOS or QuickWeb missing.

  I hope this helps.

• HP Mini 110-3500: network controller HP Mini 110-3500 driverDevice instance id:

  Help, I can't get the driver for HP mini 110-3500 for win 7:

  1. network controller

  Device instance ID: PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01\4 & 418BFF & 0 & 00E0

  2 USB controller

  Device instance ID: USB\VID_0000 & PID_0000\5 & 840DB8E & 0 & 6

  Help, please

  Thank you...

  Hello:

  You need the drivers for the wireless card.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

  I have no idea what either one is missing.

• HP MINI 110 3500 - NETWORK (UNKNOWN DEVICE) CONTROLLER

  Dear Experts,

  HP mini 110-3500-windows xp

  Discovered: network controller (unknown device)

  Broadcom 802 BCM4313. 11 b/g LP - PHY

  What should I do? should I install the driver? should which driver I install?

  my laptop also impossible to activate WLAN adapt, because it is activated (written assistant wireless).

  Help me!

  Hello:

  Please see if this driver gets your wireless adapter to work.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&prodNameId=3688870&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ob-101092-1

• HP Mini 110-3500 does not start

  HP Mini 110-3500 will not start. When I try to start I get a prompt back "BOOTMGR is missing" & «Press Ctrl + Alt + Delete to restart»

  I tried a "Factory Image Restore" and it failed with an ERROR msg '0xe0efooo3 '.

  Any help is appreciated.

  Sorry to hear that Geezer.

  You need to replace the HARD drive and reload the operating system.

  REO

• HP mini 110-3500 laptop: computer laptop HP mini 110-3500 fails to start after the SSD upgrade

  Hello
  I recently bought a ' crucial 250 gb 2.5 "SSD and 2 GB of RAM (also by crucial), to upgrade my laptop HP mini 110-3500, who has been extremely slow. But unfortunately, the laptop refused to start when turned on. What can I do? I am very worried.
  Enkay1

  You answered. That's what I thought. You have DDR3L-1600 low voltage 1.35 volts. Low voltage will operate at a higher voltage (1.5 volts), but it is not the ideal memory for older hardware. Need memory DDR3-1333 name specified for the HP laptop. You can confirm or refute my diagnosis by putting in the memory of the old and see if it boots.

  It's the part number you need:

  621567 001

  http://www.eBay.com/ITM/2GB-compat-to-621567-001-A3803335-A4100445-A4427375-/230655741975?PT=LH_DefaultDomain_0&hash=item35b4275017

  

  Is your memory has 8 black on the side blocks or just 4? You want 8. Also if you have Windows 7 Starter, you can not use 2 GB of RAM.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP MINI 110-3500 ID 64JM61-5HH70G-MFKR41-60BR03 FAILURE

  Hi, my hp mini netbook 110-3500 fell down and now won't start. The test failed and the failure of start id is 64JM61-5HH70G-MFKR41-60BR03. What it means? Is possible to fix it, or is it better to put it in the trash? Thank you to.

  Good bye.

  Claudio

  Hello

  Failure id 24 tank simply means the disc is dead (or on the point of death). You can replace the HARD drive or it's bin according to its value now. Please note: you must also add your time to the photo.

  Kind regards.

• HP mini 110-3830nr does not connect to internet says network cards need drivers,.

  I have a hp mini 110-3830nr and I just replaced the HARD drive and reinstalled windows 7 starter(32bit) and I can't said online.it drivers.when network adapters need I go to Device Manager all therr have a yellow mark on them.here are the identifiers that you guys need so I hope you can tell me where to find the drivers.

  ethernET CONtroller - PCI\VEN_10EC & DEV_8136 & SUBSYS_3594103C & REV_05
  Controller network - PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C & REV_00
  Video controller - PCI VEN_8086 & DEV_A012 & SUBSYS_3594103C & REV_00

  Help, please.

  Try this for Ethernet controller:

  http://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52421.exe

• HP mini 110-3601TU unable to connect to the internet

  I'm under the netbook with Windows7 32-bit with Service Pack 1 Starter Pack. The PC connects to the internet eventhough bluetooth and Wi - Fi indicate that they are not cancelled.  Try to connect with HP Quickweb is possible, however.  So, there's something wrong with Windows7.

  1. the network and sharing Center says "not connected".  Basic network information display and game connection - "Unknown, dependence and the group could not start.

  2. run Network Diagnostics in windows - "Troubleshooting couldn't identify the problem.

  Run the diagnosis mode in advance - "Windows could not automatically detect the proxy network setting.

  3. checking the adapter - Broadcom 4313 802.1 1 b/g/n, the device works correctly (as I mentioned, I can connect through WiFi to internet through HP Quickweb).

  I suspect that there could be a registry problem with dhcpcsvc. DLL file.  I thought to reinstall Windows7 by using the original installation media, but I was not provided with one when I bought the camera.  How can I get hold of this?

  Hello

  As it appears, you can have multiple OS files damaged, probably the best solution is to reinstall.  Before you try the following, make sure to back up all your personal files etc.

  I realize that you do not have your recovery media, but you should still be able to reinstall the operating system from the hard disk recovery Partition.  You can try this as follows.

  Shut down the laptop.  Here tap f11 as soon as you press the power button to see if it will run Recovery Manager.  If this is the case, follow the instructions on the link below under the heading ' restore the PC to its original condition with HP Recovery Manager Windows 7 " but are starting to point 3 you hired Manager option f11 recovery."

  http://support.HP.com/us-en/document/c01895783

  Kind regards

  DP - K

• HP Mini 110-3500 laptop PC: audio output device removed by error of hp mini 110-3500 need to download a relocation

  I accidentally deleted the prgram via Control Panel uninstall. Need to download even a reinstall.

  Hello

  What program you are referring to?  Or do you mean you deleted the driver for your Audio/output device?

  Checkurtech

• WiFi driver for hp mini 110-3500

  need help with driver wifi...

  problem is solved.

  THX much Mumbodog

• Can my Compaq Mini 110 c-1100DX PC take more than 1 G memory?

  My netbook has always been an excellent performance.  Great machine - sturdy and well-made.  It is installed with XP (as of December 2010) and 1 G of memory main factory.  I've upgraded to Windows 7 just after the purchase, and it worked without incident.

  It has now got too slow as 1 G is not sufficient to manage all software updates over time.  Despite all my efforts to tweak virtual memory, it is trading just too much time.

  The card online for this machine that it is only able to take 1 G memory max.  Yet, it came with a barrette simm 1 G, and the user manual talks about how to improve memory and shows how do.

  Does anyone know if a 2G or 4G simm will work in this machie?  If not, were there a bios upgrade to do this?  I was not able to find further information on HP support sites.

  Hello:

  According to the service manual, you can trade the 1 GB chip and install a 2 GB PC2 - 5300 (it will only work at 533 MHz however).  See Chapter 1, page 2 on the link below.

  http://h10032.www1.HP.com/CTG/manual/c01895806.PDF

• ESXi host does not connect more after a restart of the service LogInsight

  Hello

  I put several (5.1 U1) ESXi to use the newly installed LogInsight. they sent him their event properly. I had to restart the log service Insight. After the reboot, the hosts stopped sending events. the vcenter continued, however.

  I had to reload the syslog on the hosts to send their event to the perspicacity of newspaper.

  esxcli system syslog reload

  any idea? I guess that's not normal behavior

  Thank you

  Eric

  Hi Eric, this is unfortunately expected behavior. What you are experiencing is a bug in ESXi. More information is available in the Guide to installation/Admin under the troubleshooting log Insight section or at the following article: http://kb.vmware.com/kb/2003127.

  ESXi newspapers stop arriving at the Insight Journal

  After you restart the log service Insight, ESXi hosts syslog messages stop arriving at the Insight Journal.

  Problem

  In Insight Journal configuration changes require that you restart the log Insight service. After the restart, syslog RSS of ESXi are no longer available.

  Cause

  Some versions of ESXi stop balls sending if connectivity to the remote syslog listener is stopped, even for a short moment. This problem affects the following versions of ESXi, depending on the communication protocol used.