HP MINI won't start

Similar Questions

• Mac Mini won't start

  Been problems restarting my mid-2010 Mini for several months now.   He will start the load bar, get about 1/2 crosswise and then slow down and it will take 5 minutes to get to the end and then never loads desktop.   To get to fully charge I will usually turn off the power, unplug and then try again.  This will normally work and since I rarely shut down was not a big problem.

  After researching this, I thought that maybe the hard drive wasn't, so I replace it with a Samsung SSD.   No change and I have also downloaded the Sierra with no effect.   The DVD drive seems to have failed and I wonder if this is what is the cause to hang at startup.

  Thoughts?

  How did you install OSX on the SSD?

  Did you do a fresh install?

  If this is not the case, try this.

  If you start to recovery can you successfully repair/first aid the SSD?

  I doubt that the defective optical drive is the source of the problem, but you can log internally to ensure that

• End of 2009 Mac Mini won't start in recovery mode

  I have a Mac mini end of 2009, the latest version of El Capitan. I recently stopped a partition bootcamp by mistake and now I have 80 GB of my Mac partition filled by anything. Repartition the hard drive does not fix it. I want to reinstall the OS via the recovery however mode, hold down the command and R key results in a blank screen that never ends. I get the same result when you hold down option. The Mac starts up normally and disk utility says that the hard disk is free of errors.

  Sounds like the recovery partition has been mess up.

  -If you have another Mac then

  -Download the installer for OSX El Capitan. They should be included in the purchase of the Mac App Store section

  -Make a USB bootable media using the following:

  DiskMaker X

  -Start since the media

  -Format the boot disk and install OSX from bootable media

  -If you do not have another Mac and boot for Snow Leopard installation DVD. Lots of updated 10.6.8 and then go has bought the Mack App Store section and redownload of the El Capitan install and install

• Mini will not start capital el updated

  I was updating capital on the other on my mini. Power went out at halfway, now it won't start.  Help please

  Not knowing what exactly happens when you try to start (get chime? Flashy Power becomes? Quelque_chose displays on the screen?)

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• HP Pavilion DV9888eo won't start with My Book Mirror 2 t connected

  Same problem here: http://h30434.www3.hp.com/psg/board/message?board.id=HardwareDPC&thread.id=4367

  Installation program:

  HP Pavilion DV9888eo, AMD Turion TL-60 x 2, 3 GB of RAM

  Western Digital My Book Mirror 1 t connected USB 2.0

  Windows 7 Edition Home Premium 64 bit (clean install)

  Problem:

  -Won't start if the external hard drive is connected to a USB port

  -Boot freezes, the BIOS detects the drive, shows USB 2.0: WD My Book, fan gets stronger

  Tried solution:

  -Different USB ports

  -Varied, boot order first set internal hd

  -Disconnect and start continues

  -Mouse USB wireless at the same time / plug, unplug, almost worked

  Works okey if hooked up later when Windows has loaded (also works just after when it is plugged in after successful BIOS).

  The closest match: http://www.experts-exchange.com/Storage/Hard_Drives/Q_23769717.html

  Any advice how to solve?

  Message edited by lukevader on 10/11/2009 16:02
  Message edited by lukevader on 11/11/2009 01:37
  Message edited by lukevader on 11/11/2009 01:48

  My conclusion: HP BIOS/USB controller isn't working okey with WD My Book when you start the computer. If you wait about 3-4 minutes, to return to the boot. If you re-create the partition in Windows 7, you might be able to speed up the process. I have converted the MBR to GPT (Google more) and reformatted it NTFS. Reducing a starter and holds a GPT formatted, cannot be a boot disk. Now, there are about 1 min delay. If there is a switch to turn off USB Legacy support, that could help. There is not, thanks to the crappy BIOS HP. You can also seek support from Western Digital and discover interesting things.

  Then, finally, it'll pass the boot.

• After effects CC trial download won't start

  Hello

  In the past, I used to have the license of intern of the CC for a year and some programs installed on my MacBookPro version 10.10.1 with 8 GB of RAM. The end of the licence term, I uninstalled all the programs I downloaded previously. Now for a personal project non profit of mine, I would download the trial after effects CC. Download won't start after giving creative cloud application permission to start the download (I found the trial on the website). Fifteen minutes after the download began, and with a good internet connection, the download bar is always at 0% and when I went to the site again to check if my download has already started, After Effects icon says "Cancel" instead of "Download" in the creative cloud application.

  Help?

  Try output compared to the Creative clouds - click on the gear icon (to the upper right) and go to Preferences.

  Restart your computer.

  Sign in again and go to the applications tab and wait a while for everything to cool down.

• my iphone 6s erased and won't start

  My Iphone 6s erased and won't start

  Hello

  Follow the instructions here, including contacting Apple Support or your Genius Bar reservation if necessary:

  If your iPhone, iPad or iPod touch won't turn on - Apple Support

• Another that holding down the power button, then by restarting, how should I manage my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Another holding down the power button, then by restarting, how should I handle turn on my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Combinations of keys start for Mac - Apple Support

• Equium A100-147 tried to update BIOS, now won't start

  I was updating the BIOS on my laptop and now it won't start, the screen stay black and I just hear three beep. A long-term follow-up of two short.

  Any help would be appreciated,
  Thank you.

  > I was updating the BIOS on my laptop and now it does not start

  It seems that the update of the bios that went bad and had to be reflashed. Bios recovery is a delicate procedure and you should contact the service center:

  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

• Satellite Pro 6000 won't start or do something

  Hello

  My satellite pro 6000 stopped working all of a sudden.
  Power led, battery, keyboard LED is on, but nothing happens, tried to remove the battery, cd, hd and put them back, nothing seems bad.
  Also tried the back button back in case but no tip was not all good.
  It just won't start at all.

  Any ideas out there?

  Thank you

  [Edited by: moderation of the Forum]

  Do the job of seem´to LEDs ok, or they do a code flashing for you say that it is something wrong?

• Qosmio G20 - won't start, error ATA #1

  I have a G20-102. Today I opened my flash drive and files all showed them as shortcuts. I tried to connect to Firefox 4 and a warning from AVG threat came pointing to C:\windows\system32\mssrv32.exe (Tr/Crypt.xpack.Gen3) as a Protection of identity. I opted for the "Move to vault" option and asked to restart

  Now my pc won't start - I get the Qosmio screen, ATA error #1 (CD player has been removed) and then the screen "rolls" - looks like random pixels flashing on the screen. I'm trying to start safe mode, but F5, F8 or any Fkey is not doing

  To make things worse, the CD rom has been removed, faulty, so I can't boot from another device. I don't have a USb in the BIOS, only FDD option which I did not

  Help, please

  Hey,.

  To me, it looks like a serious hardware malfunction

  You could try to load the default settings in the BIOS. Enter in the BIOS, and then press the F9 key to load defaults. Then save & exit the BIOS and try to start again.

  The HARD drive is recognized correctly in the BIOS? If so I try a recovery disk Toshiba recovery installation and check if the problem is hardware or software partners.

• In early 2011, MacBook Pro won't start

  In early 2011, MacBook Pro won't start

  Is-ti connected? Fully charged?

  Give us some facts!

• MacBook won't start - completely back screen

  2015 12 '' MacBook

  My MacBook won't start. I put on various points of sale and even changed on the brick of cable and power (I have an extra).

  Nothing happens when I press and hold the power button.

  Any suggestions before I take it to the Genius Bar?

  Here is some information that might be useful.

  After I press the button for a few seconds, the trackpad does not haptic feedback, confirming that this is the start.

  However, if I press the power button once again, I get haptic trackpad. It tells me that it is on, but I always get a black screen. And if I press the caps lock key, no green light appears.

• Satellite Pro 2100 won't start at all - LED flash

  My SP2100 began to have feeding problems and now won't start at all. The AC adapter green LED is lit, that are relevant lights on the body of the laptop (although the "battery charge" light always orange these days). When I try the switch on, startup begins (in fact succeeded on occasion until this morning), however the battery indicator and the adapter lights are flashing, and everything stops again.

  On the rare occasions when I'll be past this stage, lights blinking, and the system soon shuts down again with a screen message "low battery." Until this morning, he would sometimes settle, the computer remained on, and the lights showed a State of equilibrium as usual.

  Initially I thought that the problem was of course the battery or the AC adapter, but now I'm starting to think that it is with internal PSU of the laptop (although I suspect the battery is probably tour after all this part of loading and unloading).

  Any ideas?

  Hello

  I think you're right. Flashing LEDS are a sign that hardware is defective.
  I can't say what exactly is the problem, this should be verified by a technicain.
  On the other side I don't know if it's worth to repair such an old machine.

  Good bye

• 4600 won't start

  Hi, community,

  my pro sat suddenly won't start. only power led flashes. Got out of the car, a piece of metal appears to be noise. But - if the drive is broken - shoulnd't the laptop will start anyway? Thank you for your help in advance. Wolfgang

  Hi, Wolfgang

  Yes, the machine must be able to start up indicating at least the TOSHIBA logo without the optical drive and fixed.

  Some background info: flashing DC-IN means that you have a problem of power supply to your machine.

  Please delete what you can without using a screwdriver. PC card, battery and so on. If you have 2 mem cards remove one.
  When everything is there, try to restart the device. Keeps blinking? If you had 2 plates of mem, remove the still inside and install another one in another location. Try again. Always the same?
  So I guess that there is a physical problem with the machine.

  If the machine starts normally, try turning off and to reconnect one removed items at once turn on the machine after each reconnection.
  Test them one by one and see if you can find out if there is a specific that causes this problem.

  Good luck!

  Tom