HP mother board n1996
I can't find the specs for this motherboard, it shows me a wth only 2 slots DIMM board and mine has 4, please help
Hi cali559guy,
Try this site:
http://support.HP.com/us-en/document/bph07557
It has the specs and other info on the N1996.
I work on behalf of HP.
Tags: Notebooks
Similar Questions
-
HP Pavilion Elite e9120y PC with mother board M2N78 - LA.
I have a HP Pavilion Elite e9120y PC with mother board M2N78 - LA. When it is turned on, it goes to the initial power of HP on screen (ESC, F10, F11 & F9) and stays there. The only time where could I get F10. He showed no boot device. What is a motherboard completely dead? Is there a similar replacement that will not affect installed licensed software?
PhilmoIBM,
There are several revisions of the Council M2n78 - LA. (like LasVegasWireMan) would testify. What is happening is the NVidia chip controller fails. You said "the only time I could get F10. She showed no boot device. " That really explains it. Your motherboard is bad.
I worked to create the list, but it never gets done.
This series of motherboard has been installed in many different models of HP computers. There are problems.
http://h30434.www3.hp.com/t5/Desktop-Hardware/m8530f-desktop-PC-with-a-m2n78-la-mother-board-doesn-t-see/m-p/181716#M13661 if you read through the pages 30 + you find mention of your unit.
Here are the models reported with the guidance of M2N78LA failed. This is not the complete list.
a4316f, e9140f, p5210y, p6130y, p6142p, p6157c, p6210y, p6214c, p6310y, p6320y, a6720y, m8530f, m9120y, m9350f, m9517c, m9530f, m9840sc
-
my name is kamal sabre
E-mail: * e-mail address is removed from the privacy *.
twmf6 fx4kv jqfjd 9m8vc xxq74
OEM:-00144-194-133-477 00144-194-133-477-04657
my key does not work... I have change my mother board giga v 31 to 41 v
Can you help me?my name is kamal sabre
Email: Email removed for protection of personal information
twmf6 fx4kv jqfjd 9m8vc xxq74
OEM:-00144-194-133-477 00144-194-133-477-04657
my key does not work... I have change my mother board giga v 31 to 41 v
Can you help me?Hey Saber kamal
If you have an oem license, you are not supposed to change your motherboard unless you do together with your computer manufacturer
oem license is linked to the original equipment installed on
Walter, the time zone traveller
-
HP Pavilion DV7 laptop: mother board &; cpu compatability
I think to change the processor in my laptop Pavilion DV7 it ha a HP 516292-001 motherboard. # High school is 7G09A1 TFC date is 2009-01-09 I want to know if an I7 processor is compatible, or what cpu would be compatible.
Fatima can a CPU of the laptop upgraded, but it seems that canbe card mother especially. Here's what I found on CPU support:
Supported CPU: Intel Core 2 Quad Q9100, Q9000 -
USB Slot/header on mother board-area 51
So I upgraded to the Corsair H80i V2 in my area 51 R2, everything is fine except that I can't find the USB slot on my motherboard for the H80i plug. Area 51 doesn't have a slot on the motherboard? If this is the case can someone tell where his establishment. Thanks a bunch!
It qwite simply does not have a
Without knowing if it works or not, you can try to share his unique 2.0 header--> header can power two devices: one device in one row from the top down, where the front o FIO Board is considered to be "two devices" or occupies both the top & bottom line
on the left, Corsair Link = 1 device usb cable >< right, 2="" of="" those="" can="" plug="" into a="" usb="">
-
Intel LGA2011-v3 (processor i7 - 5820K) mother board
I'm building a new system (the children have taken over my pc) and thinking of using a processor i7 - 5820 K Intel LGA2011-v3 and associated DDR4 memory. I think the "ASUS X 99 - DELUXE" or "MSI XPower AC LGA 2011-v3 X99S". I do not think that it comes from a performance perspective (please inform if I'm wrong), however, I wonder if anyone has any experience with the latter. I did research on the internet, and there is not a lot of direct comparisons, that I could find. I currently use the MSI big bang 1366 X-Power and I have no problems with it so MSI has been good for me. Finally, I mainly use Premiere Pro CS6 and edit my 1080 p videos and burn on blu - ray.
Thanks for any idea.
just to throw this out there, but using cs6 do 1080 p doesn't have the power that the new 2011 v3 brings to the table. so, if cost is a concern I would just get a ddr3 memory and x 79 and you will always be able to change like a champ. But if you want to future proof of your purchase and go with 2011-v3, I'd buy whichever is cheaper. CS6 and 1080 p will not perform significantly different on each Board (or one of the 99 Tips besides x).
-
HP slim line s5-1114: Mother board s5-1114
I just replaced the motherboard with even one and can get power over her. ??? I don't know what to do know? Help, please
Kingdjp39, welcome to the forum.
The best thing to do is to check to make sure that all connections are carried out correctly. Here is a presentation of the motherboard:
Figure: page layout
Also, here is a list of the internal connectors:
1 x ATX power connector
- 1 x ATX CPU power connector
-
HP Pavilion 500-424: Mother Board, PSU, CPU Upgrade
Hello
I was wondering if I can upgrade the motherboard and the PSU and CPU
Here is the link for the plug of the pc http://support.hp.com/us-en/document/c04453602
and if you can him so connect the motherboard and PSU suggested if I can improve
Hello
If you replace the motherboard then you will not be able to use the existing Windows 8 OEM operating system.
I suggest that consider you a new PC.
-
Memphis B-mother Board's SATA ports
I'm a 700-310xt system with a motherboard of Memphis b which is equipped with 5 SATA connectors. I currently have 2 internal hard drives and internal optical drive. I should any problem by adding a 3rd internal HD and a second optical drive internal.
Hello @KB41,
I understand that you are looking to add a third hard drive and a second drive to your home PC HP ENVY 700-310xt. As it is a computer CTO, you had options when choosing the power so delivery I providing information for you to keep in mind. When you install a graphics card, everyone knows that it needs to keep in mind the power as it consumes a lot of power, but other devices consume energy as well and I would recommend that if you want to add additional hardware to your computer that you keep in mind power requirements. As you do not add a graphics card at this moment that I advise you to make sure you have about 100-150 watts above what your graphics card need right now for the additional hardware and keep in mind if you don't ever upgrade the graphics card.
Otherwise, I can't anticipate every question will be who you add hardware that currently you're curious about.
I hope this helps. Have a great day and thanks for posting your question on the Forums of HP. Have a great day!
-
Acer Aspire 5541 G mother board replacement
Hello
I want to replace the faulty motherboard of my motherboard model number Aspire5541G , I downloaded the photos...
Please if anyone knows how to get the exact card for my laptop and where him find... will be much appreciated
Thank youTHE - 5992P = MB. PBY02.001 see here:
That said, it's new with or without original packaging.
You can also search MB. PBY02.001
-
Touchpad on mother board cable.
Hi all
I'm trying to find the product number for a replacement sheet that connects the main touchpad on my TM2 to the motherboard. My only current is damaged and the touchpad no longer works. The current Ribbon is about five inches long and has six copper cores.
Does anyone know how I can find the product number or where I can buy a replacement from?
My system is a Touchsmart TM2t 1100.
Thank you very much
Tm2t 1100 - i5 430
8 GB RAM
HARD DRIVE 500 GB
Windows 7 Home Premium
I'm trying to find the product number for a replacement sheet that connects the main touchpad on my TM2 to the motherboard. My only current is damaged and the touchpad no longer works. It has current Ribbon is about five inches long and has six copper cores.
Dear designmike289,
This generic 6-pin Cable of eBay must adapt, currently sells $12.99 / 2pcs. It is slightly longer than the original cable, but otherwise is a functionally equivalent replacement and is the same cable I used to fix my touchpad TM2t-2200. The seller is international, so it may take some time to arrive.
-Guppeh
If you find this solution helpful, please consider marking it as 'Solution' or adding a Kudos.
-
HP DV7-3165DX mother board update
I have a laptop HP Pavilion DV7-3165DX with a bad motherboard. I want to replace it with a motherboard with an Intel processor. Is - is this posible? The other thought I have is to put the AMD processor with an Intel processor if possible. Any advice ect. would be appreciated.
Hello
You're talking about buying a new machine here and still cheaper like that. Keep this machine and saving money for a new machine. The following link shows all the part of your computer:
http://PartSurfer.HP.com/search.aspx?SearchText=WA794UA
Kind regards.
-
CPU core 2 quad, MSI-G41 - P26 motherboard, RAM 2 + 2 Gb, hard disk 640Go
Hey Suman,
You can change the configuration of the jumpers to make the slave hard drive. If you are not sufficiently uncomfortable by doing that, then you can get in touch with the local Techshop to do the same.
-
I have a desktop Dell-540 in which my c drive is a Raid 1 configuration of 1 TB (two disks to not up to 1 TB, Raid 0, which is the backup) which has all my programs and data. I have a 2nd J: 1 TB (single drive - no raid) drive that I use as my back in-house to my drive c.
I am running in all genres or the problems of Windows 7 as well as running out of space so I would install a new 2 TB drive as new drive c and re - install windows 7 for a clean install on a single partition. I intend to disconnect my current c drive (which consists of my two disks in a raid 1 configuration) as well as to disconnect the 1 TB drive unique j and connect my new 2 TB drive. I would like to install a clean version of windows 7. So my question is this:
If I disconnect all the old disks (c and J) and install a new one and start to load windows 7 on it, the new facility does affect the bios or motherboard settings?
f for some reason so I have encounter problems, can I just unplug my new drive of 2 TB and re - connect my original c drive and drive j back to the motherboard and have it load up as it was before original, I unplugged my old PC would be back up and runing? Or, install Windows 7 on a new drive change the settings of the motherboard or bios Setup that would prevent me to connect to any return to as it was before I started?
In fact, raid 0 is striated, which means that two readers work as something one 1 TB raid 0 disk is made from two 500 GB drives. RAID 1 is mirrored, meaning that you would have two 1 TB drives each of which is one exact copy of the other. Replacing your hard drive and perform a clean installation of Windows 7 will not change your bios settings. You will need to enter the bios and change the configuration of the training of raid 0 or 1 for sata before install Windows on the new drive. To return to your original configuration and the hard disks, you will need to enter the bios and re - configure the hard drives in the raid 0 array or 1, whatever one you had.
Jim
-
Hello
I have a MacBook Pro 17 "2011 and she finished by having the video problem. Fortunately, Apple has launched its program of replacing the motherboard for this model. Now, a year later the same problem occurred. I'm a bit worried, if Apple wants to make cars in the future, if they have a breach critical and it keeps happening again. Apple agreed to replace the mother Board again, but what confidence should I that the problem occurs again another time?
A question comes to mind, if they install a logic Board revised
where the original problem has been improved to not repeat the question
or if they are just using old stock parts (N.O.S./O.E.M) design.
In this case, if the new spare part remained virtually unchanged
the original part, then a quality of the original repair
logic board by a first-rate quality repair shop can be much better.
{You can get a repaired and tested logic board replacement
at a certain point, instead of maybe a new-old-stock, or one built
the exact specifications of the same as the original; a revised version is better if
they have a. If not, repair of high-quality original L/B is good.}
That only people with parties in their hands can know if there is one
revised design improved available spare part - and if it is
What is installed, which should avoid re-facts.
In the past, old pieces new stocks had been used to repair products covered by
warranty; and these items also failed in a manner similar to known some
previous proceedings. Some iMac graphics cards, for example, saw that this.
If there is a doubt, remember to unload the repaired computer initially
opportunity and look at another model which may not be a problem.
Yet those 17-inch models have been so nice when it is set to a desktop computer...
Maybe you are looking for
-
During the recording of music from a tape usb drive, I have a land low humming noise in the background. This occurs by using different and all bands using Quick Time Player or Audacity in OS X El Capitan.
-
What is the best practice to move an image from one library to another library
What is the best practice to move an image from a photo library to another library of Photos ? Right now, I just export an image on the desktop, then remove the image from Photos. Then, I open the other library and import these images from the office
-
CDROM in Windows XP doesn't work any more how to make replacement
The Windows XP CDROM does not copy files. How do I get a new CD from Microsoft?
-
Hi all We have 2 93180YC-EX with FEX 2348TQ, NXOS: 7.0 (3) I4 (2). And we have problem: fex ports do not properly communicate with connected devices. Like the ports of L3 or L2. We simplify our test configuration to resolve this problem and use to te
-
Hi allI use OAM 11.1.2.0 and am trying to use the Federation of Oracle for the SSO component. Here's what I've done so now1. to enable Oracle Federation components-Journal on Oracle Access Manager-Click on System Configuration-Click on the available