Touchpad on mother board cable.

Similar Questions

• 57nr 6B dv7: what type of power button Board cable I have

  I'm looking for what type of power button Board cable I have I need a new replacement

  Hi @DarknesReasz,

  Thanks for posting HP forums! I read your post and wanted to help.

  I understand that you are looking for a replacement power button Board cable.

  I found below on Page 36 of the Pavilion dv7 Maintenance and Service Guide

  

  You could search the part number on the link of the HP parts store.

  Let me know if theses help to resovle your issue

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• HP Pavilion Elite e9120y PC with mother board M2N78 - LA.

  I have a HP Pavilion Elite e9120y PC with mother board M2N78 - LA.  When it is turned on, it goes to the initial power of HP on screen (ESC, F10, F11 & F9) and stays there. The only time where could I get F10. He showed no boot device.  What is a motherboard completely dead?  Is there a similar replacement that will not affect installed licensed software?

  PhilmoIBM,

  There are several revisions of the Council M2n78 - LA. (like LasVegasWireMan) would testify. What is happening is the NVidia chip controller fails. You said "the only time I could get F10. She showed no boot device. "   That really explains it. Your motherboard is bad.

  I worked to create the list, but it never gets done.

  This series of motherboard has been installed in many different models of HP computers. There are problems.

  http://h30434.www3.hp.com/t5/Desktop-Hardware/m8530f-desktop-PC-with-a-m2n78-la-mother-board-doesn-t-see/m-p/181716#M13661 if you read through the pages 30 + you find mention of your unit.

  Here are the models reported with the guidance of M2N78LA failed. This is not the complete list.

  a4316f, e9140f, p5210y, p6130y, p6142p, p6157c, p6210y, p6214c, p6310y, p6320y, a6720y, m8530f, m9120y, m9350f, m9517c, m9530f, m9840sc

• my key does not work... I have change my mother board giga v 31-v 41__can you help me?

  my name is kamal sabre

  E-mail: * e-mail address is removed from the privacy *.

  twmf6 fx4kv jqfjd 9m8vc xxq74

  OEM:-00144-194-133-477 00144-194-133-477-04657

  my key does not work... I have change my mother board giga v 31 to 41 v
  Can you help me?

  my name is kamal sabre

  Email: Email removed for protection of personal information

  twmf6 fx4kv jqfjd 9m8vc xxq74

  OEM:-00144-194-133-477 00144-194-133-477-04657

  my key does not work... I have change my mother board giga v 31 to 41 v
  Can you help me?

  Hey Saber kamal

  If you have an oem license, you are not supposed to change your motherboard unless you do together with your computer manufacturer

  oem license is linked to the original equipment installed on

  Walter, the time zone traveller

• USB Slot/header on mother board-area 51

  So I upgraded to the Corsair H80i V2 in my area 51 R2, everything is fine except that I can't find the USB slot on my motherboard for the H80i plug. Area 51 doesn't have a slot on the motherboard? If this is the case can someone tell where his establishment. Thanks a bunch!

  

  It qwite simply does not have a

  Without knowing if it works or not, you can try to share his unique 2.0 header--> header can power two devices: one device in one row from the top down, where the front o FIO Board is considered to be "two devices" or occupies both the top & bottom line

  

  on the left, Corsair Link = 1 device usb cable >< right, 2="" of="" those="" can="" plug="" into a="" usb="">

• HP Pavilion DV7 laptop: mother board &amp; cpu compatability

  I think to change the processor in my laptop Pavilion DV7 it ha a HP 516292-001 motherboard.  # High school is 7G09A1 TFC date is 2009-01-09 I want to know if an I7 processor is compatible, or what cpu would be compatible.

  Fatima can a CPU of the laptop upgraded, but it seems that canbe card mother especially.  Here's what I found on CPU support:

  Supported CPU: Intel Core 2 Quad Q9100, Q9000

• HP mother board n1996

  I can't find the specs for this motherboard, it shows me a wth only 2 slots DIMM board and mine has 4, please help

  Hi cali559guy,

  Try this site:

  http://support.HP.com/us-en/document/bph07557

  It has the specs and other info on the N1996.

  I work on behalf of HP.

• Intel LGA2011-v3 (processor i7 - 5820K) mother board

  I'm building a new system (the children have taken over my pc) and thinking of using a processor i7 - 5820 K Intel LGA2011-v3 and associated DDR4 memory.  I think the "ASUS X 99 - DELUXE" or "MSI XPower AC LGA 2011-v3 X99S".  I do not think that it comes from a performance perspective (please inform if I'm wrong), however, I wonder if anyone has any experience with the latter.  I did research on the internet, and there is not a lot of direct comparisons, that I could find.  I currently use the MSI big bang 1366 X-Power and I have no problems with it so MSI has been good for me.  Finally, I mainly use Premiere Pro CS6 and edit my 1080 p videos and burn on blu - ray.

  Thanks for any idea.

  just to throw this out there, but using cs6 do 1080 p doesn't have the power that the new 2011 v3 brings to the table.  so, if cost is a concern I would just get a ddr3 memory and x 79 and you will always be able to change like a champ.  But if you want to future proof of your purchase and go with 2011-v3, I'd buy whichever is cheaper.  CS6 and 1080 p will not perform significantly different on each Board (or one of the 99 Tips besides x).

• HP slim line s5-1114: Mother board s5-1114

  I just replaced the motherboard with even one and can get power over her. ??? I don't know what to do know? Help, please

  Kingdjp39, welcome to the forum.

  The best thing to do is to check to make sure that all connections are carried out correctly.  Here is a presentation of the motherboard:

  Figure: page layout

  Also, here is a list of the internal connectors:

  1 x ATX power connector

  • 1 x ATX CPU power connector

• HP Pavilion 500-424: Mother Board, PSU, CPU Upgrade

  Hello

  I was wondering if I can upgrade the motherboard and the PSU and CPU

  Here is the link for the plug of the pc http://support.hp.com/us-en/document/c04453602

  and if you can him so connect the motherboard and PSU suggested if I can improve

  Hello

  If you replace the motherboard then you will not be able to use the existing Windows 8 OEM operating system.

  I suggest that consider you a new PC.

• Memphis B-mother Board's SATA ports

  I'm a 700-310xt system with a motherboard of Memphis b which is equipped with 5 SATA connectors. I currently have 2 internal hard drives and internal optical drive. I should any problem by adding a 3rd internal HD and a second optical drive internal.

  Hello @KB41,

  I understand that you are looking to add a third hard drive and a second drive to your home PC HP ENVY 700-310xt. As it is a computer CTO, you had options when choosing the power so delivery I providing information for you to keep in mind. When you install a graphics card, everyone knows that it needs to keep in mind the power as it consumes a lot of power, but other devices consume energy as well and I would recommend that if you want to add additional hardware to your computer that you keep in mind power requirements. As you do not add a graphics card at this moment that I advise you to make sure you have about 100-150 watts above what your graphics card need right now for the additional hardware and keep in mind if you don't ever upgrade the graphics card.

  Otherwise, I can't anticipate every question will be who you add hardware that currently you're curious about.

  I hope this helps. Have a great day and thanks for posting your question on the Forums of HP. Have a great day!

• Acer Aspire 5541 G mother board replacement

  Hello

  I want to replace the faulty motherboard of my motherboard model number Aspire5541G , I downloaded the photos...
  Please if anyone knows how to get the exact card for my laptop and where him find... will be much appreciated
  Thank you

  

  

  THE - 5992P = MB. PBY02.001 see here:

  http://www.aliexpress.com/store/product/MBPQC02001-MB-PQC02-001-motherboard-for-aspire-5241-5541-NDW...

  That said, it's new with or without original packaging.

  http://www.eBay.com/ITM/new-Acer-Aspire-4336-4736-motherboard-MB-PBY02-001-MBPBY02001-8131-/27139291...

  You can also search MB. PBY02.001

• HP DV7-3165DX mother board update

  I have a laptop HP Pavilion DV7-3165DX with a bad motherboard.  I want to replace it with a motherboard with an Intel processor.  Is - is this posible?  The other thought I have is to put the AMD processor with an Intel processor if possible.  Any advice ect. would be appreciated.

  Hello

  You're talking about buying a new machine here and still cheaper like that. Keep this machine and saving money for a new machine. The following link shows all the part of your computer:

  http://PartSurfer.HP.com/search.aspx?SearchText=WA794UA

  Kind regards.

• My computer is not forward from the Bios, he said: 3rd master hard disk error? (Processor core 2 quad, mother board MSI G41 - P26) Help me!

  CPU core 2 quad, MSI-G41 - P26 motherboard, RAM 2 + 2 Gb, hard disk 640Go

  Hey Suman,

  You can change the configuration of the jumpers to make the slave hard drive. If you are not sufficiently uncomfortable by doing that, then you can get in touch with the local Techshop to do the same.

• Install a new hard drive and Windows 7 loading no settings are changed on the mother board or bios installation? :

  I have a desktop Dell-540 in which my c drive is a Raid 1 configuration of 1 TB (two disks to not up to 1 TB, Raid 0, which is the backup) which has all my programs and data.  I have a 2nd J: 1 TB (single drive - no raid) drive that I use as my back in-house to my drive c.

  I am running in all genres or the problems of Windows 7 as well as running out of space so I would install a new 2 TB drive as new drive c and re - install windows 7 for a clean install on a single partition.  I intend to disconnect my current c drive (which consists of my two disks in a raid 1 configuration) as well as to disconnect the 1 TB drive unique j and connect my new 2 TB drive.  I would like to install a clean version of windows 7.  So my question is this:

  If I disconnect all the old disks (c and J) and install a new one and start to load windows 7 on it, the new facility does affect the bios or motherboard settings?

  f for some reason so I have encounter problems, can I just unplug my new drive of 2 TB and re - connect my original c drive and drive j back to the motherboard and have it load up as it was before original, I unplugged my old PC would be back up and runing?  Or, install Windows 7 on a new drive change the settings of the motherboard or bios Setup that would prevent me to connect to any return to as it was before I started?

  In fact, raid 0 is striated, which means that two readers work as something one 1 TB raid 0 disk is made from two 500 GB drives. RAID 1 is mirrored, meaning that you would have two 1 TB drives each of which is one exact copy of the other. Replacing your hard drive and perform a clean installation of Windows 7 will not change your bios settings. You will need to enter the bios and change the configuration of the training of raid 0 or 1 for sata before install Windows on the new drive. To return to your original configuration and the hard disks, you will need to enter the bios and re - configure the hard drives in the raid 0 array or 1, whatever one you had.

  Jim