HP Officejet 4500 failure Analyzer error message.

Similar Questions

• All-in-one Officejet 4500 G510n of error messages

  OfficeJet 4500 all-in-in-one G510n installed OK. Windows Vista. From time to time to get the computer false error messages - incompatible cartridges / Fax memory full / align cartridges / Paper Jam. Neither of which is correct. printer continues to print but the postings repeatedly. Any suggestions?

  Hi GEO,

  Is the only computer that has this problem?

  What happens when it is installed on a different computer?

  How do you have it connected to the computer?

  HP has designed a quick and easy tool that diagnoses and solves many problems of hardware: the HP diagnostic utility hardware. These hardware issues can prevent printing, scanning or copying. HP recommends that you download and install the Diagnostic Utility material at any time that you need to solve a hardware problem.

  I would like to know what are the errors you receive?

  Hardware Diagnostic Utility

• HP Officejet 4500 Wireless: Parse error

  My Wireless HP 4500 will not my MacBook Pro analyze more. I get this error message:

  "The analysis cannot because another program has control of the HP imaging device. Try the following steps. After each step, try to scan the image. -Restart the program. -Close all programs that might be using the device. -Restart the computer. »

  I restarted the 4500 and the Mac.

  It allows to print and scan from the HP itself, just won't scan from Mac.

  Hello @Beekeeper47,

  Welcome to the forums of HP.

  I understand that you get an error message when you try to scan with your Officejet 4500.

  I would like to help.

  Try to go through the following document.

  "Another program has control of the scanner" message for printers HP all-in-one ".

  If you need further assistance or have any other questions please let me know.

• HP officejet 7580 print cartridge error message

  I have a HP officejet printer 7580 all-in-one with the error message "the following ink cartridges appear to be missing or damaged. Magenta (M) "I followed the instructions on the HP site troubleshooting, first changing the magenta cartridge, clean the electrical contacts on the print head, then replace the printhead and I still get the same error message.» I then removed the cartridge yellow and still only had the same error message about the magenta cartridge, even after restarting the printer. In my view, that it must be a problem with the software or the chip of the computer on the printer itself. Someone at - it suggestions for me?

  Looks like you did a lot of troubleshooting for the cartridge error number.  The areas of print head and cartridge are separated in the OJ series L7580 printer, so the effect print head not this error.  The error comes from the electrical contact with the cartridge in question, appears magenta of the post.

  Follow the steps described in the document, found here, to solve the problem and determine if the error comes from the cartridge or the electrical system internal printer.

  I hope this helps.

• HP Officejet 7610 - damaged cartridge Error Message

  I have a new HP Officejet 7610 - less than 2 months old. It has been working fine until today when the magenta cartridge supplied with the printer is empty.  The printer told me to replace, that I did with a new HP ink cartridge. As he tried to reset, accepted the cartridge, it gave me an error message:

  "One or more cartridges appear to be damaged." and poster cyan and yellow. The two who are aged less than 2 weeks and new HP cartridges themselves.

  So, I replaced both cartridges with two new HP ink cartridges. I keep getting the same message.

  How can I fix it?

  Hello jgfry,

  I'm sorry to hear about your problem with your new 7610 Officejet ink cartridge. Please follow the troubleshooting steps in the guide below. If you get to the last step, which is to replace the printer, please call HP Technical Support to ask for a replacement.

  A "Incompatible cartridge" or "Cartridge problem" Error Message appears on the printer control panel

  If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Take care

• OfficeJet Pro 8500 wireless Error Message Invalid drive F:.

  When I run the install disc for the Officejet Pro 8500 wireless, or through wireless or USB, when installation gets to 23% I get an error message not valid drive F: /. I have tried everything to fix this problem and searched many hours, but none of the fixes worked. There is no F drive on the laptop (older hp Pavilion). In fact, there are only the drives C and D. I went to the computer and manage to ensure that the drive is called straight, and it is.  There is nothing plugged into the USB ports, when I do the installation. Any suggestions before I pull all my hair? Thank you!

  Open the command prompt, and then type this:

  subst F: C:\

  Re-install the software later

• HP Officejet 6600 print head error message

  Recently had an electrical storm and power neighbor hood was off briefly. Though even my printer is plugged into a surge protecter, I now have an error message on my printer that reads...

  "Missing or faulty print head".

  ceyan, magenta, yellow, black

  the print head seems to be mjssing, not detected, incorrectly installed, or incompatible"

  Before the storm, I had installed 2 new ink cartridges. My troubleshooting efforts consisted of unplug the printer from the power source and plug back and removing ink cartridges / resettlement. I always get the error message "printhead".

  Hello

  I think you did everything I would have tried.

  Even if unplug you the printer, I wonder did you leave it unplugged for more than 15 seconds.  See the link

  http://support.HP.com/us-en/document/c03750651

  If this does not resolve the problem then I think it would be appropriate contact HP because this printer is probably still under warranty.

  Hope this helps somehow.

• LabVIEW 2009 Student Edition Vista x 64 install no failure, no error message even though

  I am trying to install a copy of LabView student edition 2009 and initializes whenever installation, modules fail to install for each single module.  Also, there is no error message.

  I received a message that LabView can not work properly because of the firewall Windows, which I disabled it. This message sent me on ni.com/frinfo, code expm69.

  Let me know, I'm a little confused as to what is happening.  It would be due to a patch or what not?

  Thank you!

  Hi imagineerme,

  It is possible that the CD is damaged.  You can either try a different CD if you have access to one, or because you have access to a student version, you should be able to also access LabVIEW via ni.com/src.  All LabVIEW versions are available for download on this site. Please let me know if you are able to download LabVIEW from there.  NI.com/SRC will also specifically download the 64-bit version of LabVIEW, since you have a 64 bit OS.  I hope this helps!

  Kim

• Windows XP Home SP3 update 2002 failures (no error message): KB2686828, KB2656407, KB2656352, KB2657424, KB2604092, KB2656369, KB2604111, & KB2604110.

  I just upgraded to Office 2010 Pro Office 2003 Pro and installed a backlog of updates of security (also just moved from dial-up to high speed).  64 installed with success, but 6 continue to fail (no error message) - see list below.   I tried to reinstall individually in order of date (oldest first) & also run Microsoft Fix - it then retries - same result.  Quick suggestions for a non-irritable, or do I have to contact online technical support for assistance?  THX!

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2686828)
  Security Update for Microsoft .NET Framework 3.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2656407)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2656352)
  Security Update for Microsoft .NET Framework 3.5 SP1 on Windows XP, Server 2003, Vista, Server 2008 x 86 (KB2657424)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2604092)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2656369)
  Security Update for Microsoft .NET Framework 3.5 SP1 on Windows XP, Server 2003, Vista, Server 2008 x 86 (KB2604111)
  Security Update for Microsoft .NET Framework 3.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2604110)

  Hello

  Have what Microsoft fixit you tried?

  Method 1:

  I suggest to perform the clean boot and then try to install the updates of windows.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. click on Startand then click run.

  2. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  3. click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  4. When you are prompted, click restart to restart the computer.

  Method 2:

  I also suggest you to see link and check.

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

• OfficeJet 4650: Instant ink Error Message

  When lit the print request 'loaded document' press 'Yes' to the screen.  Screen flashes once then displays "[something that can not be displayed] instant ink cartridge" cartridge cannot be used until the printer is registered in * instant ink. "a blue light flashes on the right.  The screen can be scrolled but cannot be erased.  Printer is connected wireless and answers since 12/01/2016 to instant ink program and recorded three days of printing.

  It is apparent from looking at the computer on which the printer does not recognize that it is connected via the wireless.  Don't recharge not software due to the inability to access control panel.  I tried the fact to unplug the printer.  Normally, two computers can print to printer.  Or connects to the printer because the printer does not free Wi - Fi access.

  Problem number two: I tried to enter the following tags "4650, instant error of ink, screen lock"and received the error message "the message tags contains the letter H and the letter p" which he did not. "

  Contacted the instant ink, after two calls droped and 3 hours, they decided to printer was broken and sent me a new then called back to make sure it has been set up and logged onto the instant the ink account.  It may have taken 5 hours, but the problem has been resolved and I'm retired with a few demands on my time.

• HP Officejet 6700 Premium - useless error message

  Only error HP Officejet 6700 Premium "there is a problem with the printer or ink system" I turned off and unplugged but same error with no code.   This message occurs as soon as the printer lights.   Where should I start looking?

  Give a call to HP support technology.

• HP OFFICEJET 4500 WIRELESS reads ERROR in SCRIPT

  ALL STARTED IT w/COUPON SUZY (coupon.dom). He said that I have to install the coupon printer, I have ckd and it was installed some time ago. I read their stuff of troubleshooting and said I'd need to ck my ports on my printer. Looks like that I really in difficulty this time. I added a newport, due result, UNINSTALL the printer and INSTALL all over again. After all he wanted me to on the disc, and my impression says CONGRATULATIONS, printer is installed and ALL showed ready to use. I tried to print a print "dummy" out and still ERROR in SCRIPT. ANY SUGGESTIONS... I have W7 family computer premium laptop and everything was and worked well until the CouponSuzy began... I use IE9 and who have used some time. Recently, I went to IE10, but found that it was not compatible with my elements of security for labour issues and to remove and revert to orig IE9.

  No matter WHAT HELP, I certainly welcome that and VERY MUCH APPRECIATED too.

  Thank you

  LOU

  OK, you can go ahead and uninstall the software and then to reinstall the full software features on the HP website.

  In addition, make sure that the 4500 is connected to the network through the wireless set up wizard.

  In addition, with the PC you use, need wireless card installed in it?

• OfficeJet 6830: Print head Error Message

  Obviously, there is a problem with many people.  While I remember just when I bought it, and it is even possible that I had for 6 months or a year, this print head thing is a problem, and so far, the machine worked perfectly.  I wouldn't have to go buy another when it's clear, there is a malcunction with the machine that is so widespread.

  I need my printer to my job every day. Which caussed cela and have the rest of you is also the woman who had been his machine for only 30 days?

  mjwhearts

  You will need to contact HP for a replacement.  From a post of Sunshyn2005, contact technical support HP see the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.

• HP officejet pro 8500 Wireless / error message 'cancellation of the alignment.

  OK first the screen prompted me to change the Cyan ink cartridge, and after I replaced it I get canceling the alignment on the screen.  Second cartridges can be removed when it place in the printer?  It seems that I lost 2 cartridges by removing and it seems that all the ink spilled in the back of the printer.  HELP Please

  Hi, see you the following link:

  http://support.HP.com/us-en/document/c02451504

  Scroll all the way up to step 4: examine the test pattern 3.

  A method under step 4 shows you how to access the box tools/pilot, and from there try to "Align the print heads" instead of "Calibrate linefeed.

  Concerning

• Photosmart C7280 All in One Printer, Error Message - ink system failure

  Hi, I have above named printer with an ink system 0xc18a0406 failure Error Message.

  The Printerhead cannot be taken out for cleaning, because there is no leverage. Please can you help me?

  Thank you, Cynthia

  This might help you:

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/do-you-have-an-ink-system-failure-0xC-error-message/TD-p/740567