OfficeJet 6830: Print head Error Message

Similar Questions

• HP Officejet 6600 print head error message

  Recently had an electrical storm and power neighbor hood was off briefly. Though even my printer is plugged into a surge protecter, I now have an error message on my printer that reads...

  "Missing or faulty print head".

  ceyan, magenta, yellow, black

  the print head seems to be mjssing, not detected, incorrectly installed, or incompatible"

  Before the storm, I had installed 2 new ink cartridges. My troubleshooting efforts consisted of unplug the printer from the power source and plug back and removing ink cartridges / resettlement. I always get the error message "printhead".

  Hello

  I think you did everything I would have tried.

  Even if unplug you the printer, I wonder did you leave it unplugged for more than 15 seconds.  See the link

  http://support.HP.com/us-en/document/c03750651

  If this does not resolve the problem then I think it would be appropriate contact HP because this printer is probably still under warranty.

  Hope this helps somehow.

• OfficeJet HP 6830: 1 year older printer print head Error Message

  Continuous "Problem with printhead" error on my printer at home. Am (was until today) an instant ink Subscriber. Running through the provided tool on your site, my printer is "out of warranty" since December 26, 2015. How can I do to get this fixed or replaced? I've read THAT a LOT of people have this same problem. Is this a known issue with faulty hardware?

  I didn't know that HP has been in the game 'self-destruction printer. 1 year is unacceptable in the life of a printer at home. If it can not be covered by your business, is it possible to fix me?

  Hello! Welcome to the HP community @MMPhishkid,

  I understand your Officejet 6830 displays an error "print head", and I wanted soft hand on it. Unfortunately, you will need a new unit altogether away from the error message. HP may have spare for you printer options. I'll leave their contact details below for you to contact them with your next printer options.

  I know that it does not help to solve the current problem, however, I hope that this information has been useful.

  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• Officejet Pro 8600 print head error message

  I get an error message "print head seems to be missing, not detected, or incorrectly installed. Printhead missing or failed. "I followed the solutions provided on the printer as printer be disconnected and reconnected. out of the cartridges as demo showed. Everything was going well. Reconnected to the router wireless system. All to nothing does not. I bought this printer in February of this year and had no problems until this has happened in the last few weeks. It is still under warranty. I need this fixed or replaced immediately. What should I do? Thank you for your help.

  Hello

  Please click HERE to access the procedure which should solve the problem.

• OfficeJet 6812: I get a print head error message

  I get the error message "problem with printhead. I tried all of the suggestions I found on the forum and am unable to solve the problem. I spoke with a representative chat, and she asked if he was allowed to have a technician call me. I said ok and gave my phone #. The tech who called was a third-party company that passes with software problems and was not able to help with my print head problem, because it is a hardware problem. I went online and entered my information of the printer and I was told that it is no longer treated by hp.

  I am very angry and annoyed that I literally bought the printer on 05/11/15 and hp will not right dated 06/06/16 it no longer works. It's a good thing I bought a warranty to the store when I bought the printer. They will refund my money within 15 working days. This of course does not help my problem, it?

  I won't buy a HP printer again.

  It's a shame that what was once a reputable company is no longer stands by their product or their customers.

  The printer needs to be replaced by HP, contact them as described in the paper here.

• HP Officejet 6700 Premium: HP Officejet 6700 Premium - missing or has no print head Error Message

  THIS IS A MUST READ! COSTCO ROCKS! I bought my HP 6700 just less than 3 years after the explosion of ink everywhere inside a different HP printer and stopped working on me. (Which I thought was my fault. Now, I'm not sure.) A week ago, I started getting the error message "printhead missing or defective. I have tried everything what he has proposed and managed to make a few more before copies he refused to do more. I had online in the hope of finding a solution and found this forum and all the people, swearing to never buy another product HP because of this obvious 'planned obsolescence'. I had just replaced the ink cartridges twice, which showed how little I used it, but I had it for 3 YEARS so I thought I'm screwed!  I was angry against HP and I wanted to do COSTCO know they should stop selling their shit. I called COSTCO and spoke to a young woman and asked if they had had a lot of feedback on this model. She asked her supervisor, and he said a couple, but not something unusual. I said on this forum, and how they probably had not heard anything because most failed right after the warranty expires! She said "well bring back! I said 'What?'. «» Bring back! ", she said. I managed to stifle the "but, but, the guarantee was until TWO YEARS ago! She said "we worry not about the manufacturer's warranty. We want our customers to be happy with everything they buy at COSTCO! ». It's as simple as that.

  I repeat. COSTCO ROCKS!

  Now, if everybody who bought this printer from COSTCO back it when (not so) it breaks, even long after that the warranty is up, and COSTCO may be sending all back to HP, HP will begin to worry that annoy me COSTCO is a bad idea. And then maybe the poor people who have bought their printer elsewhere will begin to get an appropriate response to their complaints. I hope this post doesn't fighting flag and delete for inappropriate language. I tried to keep PG :-)

  The post you mention is here.  It was launched in 2013 and has 110 responses.  The thread was completed four months ago and responses are more accepted there.

• HP officejet 7580 print cartridge error message

  I have a HP officejet printer 7580 all-in-one with the error message "the following ink cartridges appear to be missing or damaged. Magenta (M) "I followed the instructions on the HP site troubleshooting, first changing the magenta cartridge, clean the electrical contacts on the print head, then replace the printhead and I still get the same error message.» I then removed the cartridge yellow and still only had the same error message about the magenta cartridge, even after restarting the printer. In my view, that it must be a problem with the software or the chip of the computer on the printer itself. Someone at - it suggestions for me?

  Looks like you did a lot of troubleshooting for the cartridge error number.  The areas of print head and cartridge are separated in the OJ series L7580 printer, so the effect print head not this error.  The error comes from the electrical contact with the cartridge in question, appears magenta of the post.

  Follow the steps described in the document, found here, to solve the problem and determine if the error comes from the cartridge or the electrical system internal printer.

  I hope this helps.

• MP830 print head error message

  After that I put in a thick black cartridge in my printer MP830, it comes up with a message saying

  "The type of print head is incorrect.  Install the correct print head.

  I have nothing else except put in new black ink cartridge (a small one) then needed large one done and had to wait for a delivery of clips for the larger cartridge.  Installed black cartridge thick and error message as above.

  I removed the print head and reinstalled according to Karl1, expert in products, turned on and outside; repeated head print reinstall and same message referred to in paragraph 1.

  New print heads are $249, which is ridiculous, and this seems to be one problem with others with this product.

  Help please.

  I saw that you answered, but I can not find your answer.  The only one is the answer you gave to mags which was the same problem I had.

  email me at (MOD NOTE: Email address removed in accordance with Forum guidelines) with how to get your reply and a resolution of this seemingly common problem.  I need to print and go buy another printer, but not a Canon, if you can't come up with a good solution.

  Mary Ruth

• Officejet Pro L7780 print head error

  I have a Officejet Pro L7780 all-in-one. Recently, it does not work due to a print head error (printhead missing or damaged M/C). Help, please.  Thank you very much.

  Hello

  Use the following link to complete the troubleshooting steps.

  http://support.HP.com/us-en/document/c01446637

  If you still receive the error message after you perform the steps in troubleshooting mentioned in the document, then try cleaning print head in the printer menu.

  Installation Menu - Tools - cleaning print head

  Configure the Menu - Tools - align printer.

  If none of these help then try this reset... This reset will restore the printer to its factory settings & will clear all the settings of the printer.

  Unplug the cord from the back of the printer while the printer is always enabled.

  Now hold "# & 9 ' buttons on the printer and connect the power chords while pressing the 2 keys. Wait 10 seconds, then release the keys.

  If the printer turns off automatically, then wait for 10secs. and then turn on the printer using the power button on the printer.

  I hope this helps.

• Incompatible print cartridge error message

  Below you can find a video on setting a cartridge print Incompatible error message in an Officejet J4680 printer. The steps it will show you how to do the following procedures.

  1. Remove and inspect the cartridges

  2. how to clean cartridges and what materials to use for this process.

  3. replace the cartridge

  4. printing in the mode back.

  The stages of care cartridge will work on all printers that have the HPI cartridges.  IPH cartridges are those who come in all black and tri-color and have no individual cyan, magenta, and yellow colors. This is also true when the video talking about printing in backup mode as some printers with cartridges IPH are able to print in rescue mode when a cartridge is missing from the printer.

  I hope the community finds this video to be useful.

• OfficeJet pro 6830: 08024200 × b error message

  I was not able to find any help on the HP site for the error message 08024200 b × for the software update failed. This happened, unbeknownst to me, almost every day since June this year.  I have no message from HP or MS about the situation.  Any help?

  Hey @freddy42,.

  Help is here! I am happy that you have joined the community of Forums of HP Support to ask for help. I read your post and you understand that you receive the error 08024200 × b code. I'll do my best to help you to resolve the error code. Please, try the following steps:

  • Go to settings
  • Open devices
  • Open devices
  • Click on Device Manager
  • Search for the unknown printer
  • Right click on the unknown printer
  • Click on properties
  • Go to the driver tab
  • Click on delete

  This answer doesn't solve your problem or answer your question? If so, please share the good news! Inform others that this answer was helpful by clicking on the button accept as a Solution . You can also show your appreciation by clicking thumbs-up.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems.

  Take care

• HP Officejet Pro 6830: print head

  print collapsed in the middle of the page.  screen says just problem with printhead.

  E troubleshooting steps in the document, itcan help solve the 'problem with printhead' question on your Officejet 6830. Most likely, you will need to contact HP for service.

• The HP printer cartridge error message

  When I try to replace an ink cartridge in my printer Officejet 6500 wireless, I keep getitng an error message that the cartridge is damaged or missing. I tried another insering and got the exact same message. I can't get my printer to accept the cartridge. The cartridge is in perfect condition.

  What exactly is the error message?   Click on the appropriate link below.

  The "print head problem" or "Print head seems to be missing or corrupt" error

  Message "Ink cartridge problem" on the product

• HP Officejet 4500 failure Analyzer error message.

  HP Officejet 4500 error message when turned on reads scanner failure. Impossible to scan, copy or send a fax! Printer is over 2 years old and was working fine before.

  I've included a link with some troubleshooting steps that may solve this issue for you:

  http://support.HP.com/us-en/document/c00587971

  If none of these steps resolve the problem, I would recommend the HP call to discuss upgrade options. Here is a link with directions to contact HP:

  http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

• All-in-one Officejet 4500 G510n of error messages

  OfficeJet 4500 all-in-in-one G510n installed OK. Windows Vista. From time to time to get the computer false error messages - incompatible cartridges / Fax memory full / align cartridges / Paper Jam. Neither of which is correct. printer continues to print but the postings repeatedly. Any suggestions?

  Hi GEO,

  Is the only computer that has this problem?

  What happens when it is installed on a different computer?

  How do you have it connected to the computer?

  HP has designed a quick and easy tool that diagnoses and solves many problems of hardware: the HP diagnostic utility hardware. These hardware issues can prevent printing, scanning or copying. HP recommends that you download and install the Diagnostic Utility material at any time that you need to solve a hardware problem.

  I would like to know what are the errors you receive?

  Hardware Diagnostic Utility