All-in-one Officejet 4500 G510n of error messages

Similar Questions

• Black cartridge HP PSC 950XI all-in-One HP 78XL mark stop error messages.

  Black cartridge HP PSC 950XI All - In - One HP 78XL mark stop error messages "" error: installed incorrect color cartridge ";" "" Install the color cartridge"and"install the color cartridge. I cleaned the contacts on the printer and cartridge and printhead. Cannot make it work.

  I've tried everything and still get error messages that continue to change so I can say that things are get cleaned but this cartridge is just not good. I ordered more than HP 78 and 78XL cartridge. If they show mistakes I'll let you know. Thanks for the suggestions, there was one that I had not tried before so I will certainly remember.

• HP Officejet 6310 all-in-One: Officejet 6310 'door open' error

  I checked all the solutions to the error 'Door open' and tried without success. What follows is not a pretty solution but has worked for over 2 years.

  The hinge on the machine out of alignment (usually after more enthusiastic opening to replace ink cartridges) and the cartridge door will not close properly leaving the switch to slightly elevated detection.  This generates the error message 'Door open' and the machine will not work.  Look for the sensor suspended - see pp 96 left corner http://h10032.www1.hp.com/ctg/Manual/c00633922.  The band down with masking tape.  The error message will and function printer/fax/scanner normally.

• HP Officejet 4500 failure Analyzer error message.

  HP Officejet 4500 error message when turned on reads scanner failure. Impossible to scan, copy or send a fax! Printer is over 2 years old and was working fine before.

  I've included a link with some troubleshooting steps that may solve this issue for you:

  http://support.HP.com/us-en/document/c00587971

  If none of these steps resolve the problem, I would recommend the HP call to discuss upgrade options. Here is a link with directions to contact HP:

  http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

• Printing from MAC for Deskjet 3050 ALL in one J611n - printer "Not connected" error message

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

  I see that I had 20 veiws and no answer!

  I am new to Mac and not very techno, however I seem to have solved this problem myself.

  I think that after turning to 'Maverick' on my Mac OS Lion, duplicate the printer as 2 showed in 'utility '.

  "I basically deleted that was not'online ' or 'connected '.

  Problem solved!

  Tracy UK

  TracyUK wrote:

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

• printer all in one HP psc 1315xi - cartridge error message

  I recently bought a used hp psc 1315xi all in one printer.  The printer is in very good condition and came with a HP 27 black inkjet print cartridge and a tricolor HP 28 inkjet cartridge.  Both cartridges are half full (my computer can read the levels until I try to print).  However, when I try to print something from my MacBook Pro an error message that says the black print cartridge (and then soon followed by cartridge three colors) is not compatible with the printer.

  I checked the cartridges, and certainly they are supposed to work with this printer.  I tried cleaning and even uninstall the printer from my computer software but nothing has worked.  I don't understand how the printer can read how much ink is left in the cartridges but goes on to say that the cartridge is not compatible.  Please help me.  I don't want to buy new cartridges and it just happen again (and be $50 more poor).

  Thank you!

  Hello

  I totally agree with you.

  If you are in the United States, please call HP for Technical Support and you may be provided with the option to upgrade to a printer.

  Please call the HP Technical Support for assistance.

  If you are in US, the toll free # is 1-800-474-6836.

  If you are not in US , then log on to www.hp.com , bottom left it is an icon of the world map, click it, then select the region that you belong to, which would then provide the support options for you for this region.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• HP All In One Officejet 4500: HP print jobs all in a single Officejet 4500 disappear. Print test pages. NO ERROR MESSAGE.

  Lenovo Thinkpad T61 refurb bought last fall. Today when you attempt to print a page of a web site (Firefox, latest update installed today) the print job has disappeared. I tried e-mail (Thunderbird and web) and files, and in all cases, the print job goes away completely. I did all the steps of printing test pages, and they all work very well. I have uninstalled/reinstalled the printer, without result.  I tried new drivers or updated without result.

  The light of attention seems to be on, but it is very weak and disappears when the printer goes into powersave mode. There is NO error anywhere, nothing appears on the search via the control panel.

  At this point, I have a broken printer? A situation of system restore?

  A wasted two hours and I'm about to be really annoyed. Ideas appreciated. TQ

  How very special. Not your answer, thank you very much for your time. But there were two solutions posted much sooner, within a very short time after I posted the question. Confined together part both of the solution and the rest of the solution were, essentially, download the software version of seven 2014, which supersedes what I had. So, I've marked the post as solved, says thanks a lot and thought no more about it. (Although I am still puzzled as to why it happened in the first place.) Now, my post is reopened, the responses of two originals have disappeared, and yours have been replaced, all this without any explanation. It's just a bit too scary. Fortunately, the problem seems to have been fixed by the software update. So, I'm marking as closed/resolved. Thank you.

• HP Officejet 4500 G510n-z all-in-one series, button walk / stop

  HP Officejet 4500 G510n-z series all-in-one wireless.

  When I press and release the power button, it does not start and no lights appear.

  If I press and hold the power button for about a minute, the printer turns on and works fine.

  To turn off the printer, I need to press the power button for about a minute.

  Hi @Tonyey20,

  Welcome to the Forums of HP Support! I see the power button on your HP Officejet 4500 is inadmissible, if you press and hold the button for one minute, the printer will turn on and work normally.

  I would like you to start troubleshooting here: The HP printer will not be running or to respond when the power button is pressed

  Please let me know the results. I'll watch for your reply.

  Thank you

• printer Officejet 4500 G510n: hp officejet all-in-G510n problem printer 4500 software download and driver

  When I download the software and drivers for the officejet 4500 G510n, and the attempt to extract the file it will not open indicating that the file is corrupt.  I tried several times with my AOL and Internet Explorer browser.  Suggestions, thank you.

  Thanks a lot, this solves the problem

• OfficeJet 4500 G510n: I can not install my printer portable officejet 4500 G510n after updating windows 10

  Help please.  I tried for days install my portable printer officejet 4500 G510n to my PC G wireless that runs 10 recent Windows updates.  I tried everything, including the uninstall/reinstall but it is never successful and I understand the different problems every time.  I even tried setting up by USB... always without success.  I don't understand what is the promlem.  AND when I use one of the programs that install fails, it installs a solution for me for windows 8, which does not, of course, because I have 10. I really wish I had a printer again!

  Welcome to the @DLBHJ forums

  I hope to help with installation issues you are having with your Officejet 4500 on Windows 10. Here are some steps to start you off. When you are finished, just reply to me with the results, errors, etc. Any information you can provide will help!

  1 uninstall all printer software that is currently installed.

  2 restart the printer and the computer entirely.

  3. clean boot the computer and restart it: How to clean the boot

  4. when the computer restarts, download and install the software here.

  5. once the printer installed, return to the boot process and re - activate the start up programs.

  I hope this helps and works. Let me know what happens.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• OfficeJet 4500 G510n-z: failure sending a fax from Word G510n-z

  I use a laptop Toshiba Satellite running Windows 10 with, AFAIK, updates. I am trying to send a Word document by fax to my connected OfficeJet 4500 wireless. The printing process works, I get the dialogue Send Fax, I dutifully fill. The document goes to the queue from print, then disappears. The printer is not composing or anything; the document will just in the bit bucket, without error, not even in the case log.

  Other relevant details:

  • I tried reinstalling the drivers; After several hours the skin of HP software, I did.
  • The laptop has 3 printers associated with my physical device: 2 printers generically named ' HP OfficeJet 4500 G510n-z ' and ' fax HP OfficeJet 4500 G510n-z "; and "HP # (HP OfficeJet 4500 G510n-z) ' (where # is a hexadecimal number of device-specific, I'm not willing to share here). The third argument prints correctly to the book.
  • I can scan documents through the HP Support Center application.
  • Copy and fax work correctly to the device itself. For example, if I have first print the thing, I want to fax, then by fax using the document feeder and the front of the device, it connects and sends the fax correctly.
  • The last time I checked, I was able with a fax in a program on my archaic Macintosh.
  • To repeat the foregoing, no errors are displayed or saved. Each attempt appears in the Fax as "Completed." log I don't want to get all the answers canned on the subject, thank you very much.
  • I browsed this forum of the community and support site and tried what I could find and understand how to do in Windows 10 of bugs. (Disclaimer: I've always been a Mac person and a VMS/Mac/Linux software developer, to try to understand how to do something which expected to be simple in Microsoft mess was not easy for me.) It is not suggested with a laptop given to his wife by a friend, however.)

  What unconscious thing [sic] I'm missing?

  Hello

  Please, look at the next post and make a good choice:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/want-to-send-fax-from-PC-in-HP-OfficeJet-4500-all-in-one/TD-p/1443895

  Kind regards.

• HP Officejet 4500 G510n Scan via airport utility?

  How can I get my HP Officejet 4500 G510n to perform a SCAN using airport utility?

  Airport utility is not related to operating an MFP. It there is no scan via airport utility function or any what router airport. That is, the printer must be connected through its network and NO USB connection to the router. What is the Airport base station is the printer is simply a network client. No printer function any is active via the airport.

  You must install the drivers HP and the complete software for any OS that you are running on your computer.

  http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---G510/3919445/mod ele/3986394/document/c0...

  It's the HP drivers and software that will allow you to scan over network. Or if NOT, maybe... often scanning on network is problematic.

• Officejet 4500 G510n-z hp Solution Center: does not install

  Recently updated for laptop with windows 8.1.   I have an officejet 4500 G510n-z.  The computer recognizes the printer and print.  My main problem is that I can not get the hp solution center appears.  Without it I can't scan.  The intall disk is outdated and I tried many downloads of software and the doctor print and scan without result.  Any ideas would be greatly appreciated.

  Hello cpilo1,

  You must use the full driver for your printer. Download the driver below and install it please.

  http://support.HP.com/GB-en/drivers/selfservice/HP-OfficeJet-4500-all-in-one-printer-series---G510/3919445/model/3986394#Z7_3054ICK0KGTE30AQO5O3KA30R1

• OfficeJet 4500 G510n-z: HP Office Jet 4500 G510n-z fails to print over wireless network

  Hello

  Earlier my XP (Dell D620) machine stopped printing wireless with my officejet 4500 G510n-z. My Windows 7 D630 prints wirlessly without any problem. I have download the current HP drivers without result. I looked at other positions, but none of the viable solutions. The 4500 G510n-z appears as a printer, but all print jobs end with an error. I can't print a test page, Notepad, etc. All jobs appear on the queue, but they all error. It seems to be a specific problem of the XP. I have XP pro version 2002 Service pack 3. My network is just a Verizon Fios wireless router. In windows 7, I can see the actual address of the Hp wireless connection when the printer is added. Under Xp I do not see the address wireless when I try to add the printer. Now, it appears in the list of printers on XP but 7 seems to see the actual address wireless and allows me to select it to add the printer. I plugged the XP machine to the printer and it would work for a while then stops working. Don't know what triggers the loss of connection. How can I specify the connection 4500 G510n-z XP? I tried to add the IP address I see on my 7 machine but XP wants to a path of the server which is //server etc., UNC path.

  I went in the properties of the printer and changed the address to match the 7 IP 192.168.1.3 192.168.1.9 Windows 7 XP, but not go again.

  Thank you

  Al

  Hello @adb1779,

  Thanks for getting back to me on this subject. Because the ping tests on both computers is successful when communicating with your wireless printer, it turns out that you do not encounter a network issue at all. On the contrary, there is either a program of 'blocking' of printing wirelessly on your XP computer or computer XP is not "like" the fact that you have changed the IP address of 192.168.1.3 to 192.168.1.9. It would seem that your XP computer is a former connection with the printer. To resolve this problem, please follow the steps below.

  Step 1: Launch MSCONFIG:

  I'll have you temporarily disable all programs background on your XP system to see if there is a program that runs in the background on your Windows XP computer that would block communication with your printer.

  1. Click on the Start menu
  2. Click run. In the Run dialog box, type msconfig and click OK
  3. When the System Configuration window opens select 'Selective Startup ' and uncheck load startup items
  4. Click the Services tab, check the box at the bottom to hide all Microsoft Services
  5. Select disable all
  6. Select apply and OK
  7. Computer restart when prompted

  When your Windows XP computer turns please try printing. If the printer works correctly now it would mean that a program was blocking the communication. If the problem persists, proceed to the steps below.

  Step 2: Uninstall the drivers:

  I understand that you have already done this in the past without result. However, if your product is identified as on 192.168.1.3 she is not installed correctly, or an earlier version of the printer with an old IP isn't be properly removed from the system. It is crucial for the repairs we have a clean slate to work with. Please follow the steps below.

  1. Click on the Start menu
  2. Click on programs
  3. Select the HP folder
  4. Select your HP Officejet
  5. Select Uninstall
  6. Please follow the instructions on the screen to complete the uninstallation.

  Once the uninstall is complete, proceed to the next step.

  Step 3: Clear the server properties:

  Your printer driver can also be installed under the print server properties. I'll have to make sure your driver has been completely removed from both print server.

  1. click on the Start menu

  2. Select Printers. You may need to go to the Control Panel then Printers and faxes.

  3. in printers and faxes click on file and select Server properties

  4. in the print server properties window, select the drivers tab

  5. If your HP Officejet is listed, click on it and select Remove downstairs.

  6. a new window opens, click on Remove only the driver. Click OK.

  

  7. Select apply and then OK in the print server properties window.

  8. close printers and fax machines.

  Step 4: Delete the temporary files:

  1. Click on the start menu
  2. Select run. In the Run dialog box, type %temp% , and then click OK
  3. Click on the Start menu
  4. When the Temp folder opens, Select the first item in the Temp folder and tap the SHIFT key on your keyboard.  Now Shift while, scroll down a few lines and click on another element in the file. What is between these two elements will highlight.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. If a Temp file be used yet that you will automatically get the pop-up that you can't delete this item. The "deletion" process is cancelled. On Windows Vista, 7 and 8 of Windows you can just "jump" from the items which will not delete. Unfortunately, on Windows XP, it is not so easy. Take note of this point is unable to delete. Then, ignore this element. Click on the next element in the list, hold the SHIFT key and click another item in the list to remove another piece of elements. You will continue this tedious step until all items in the Temp folder which will remove are deleted.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 5: Reinstall the drivers:

  1. Please click here to download the drivers for your printer
  2. Once the site opens click on the download button at the top left
  3. Once the download is complete, follow the instructions on the screen to reinstall your printer wireless
  4. Once your printer is properly reinstalled please try again to print wireless.

  Please reply to this message with the result of your troubleshooting. Good luck!

• scanner HP officejet 4500 g510n Readiris (OCR) does not yet recognize will scan using hp OCR

  Greetings,

  OfficeJet 4500 g510n wireless, windows 8, readiris pro 14.

  OCR, scanning works fine using the ocr software supplied with the cd printers.

  Readiris is no Twain especially for the 4500 but has "hp twain others."

  I've uninstalled and reinstalled the TWO printing software and the readiris program

  Readiris refuses to recognize my printer "failed to open the default Twain source" and "the scanner is not responding.

  Readiris support has not responded to my request sent 5 days ago - makes me wonder if their software is the same as their 'support' - pretty useless!

  any suggestions please

  Concerning

  The way I understand it, readiris works that on HP scanners or all-in-One printers offer no OCR software. He added this feature for scanners and printers who have not already. As the 4500 has already built an OCR software, readiris software will not work. I'm not 100% certain about it, as I've only dealt with the OCR of HP software, but what I've read, that's my understanding.