HP Officejet 4575: 10 Windows printer driver

Similar Questions

• OfficeJet HP 6700 H711: HP 10 HP officejet x 64 windows printer driver

  Add Windows 10, parameters, printer, install the driver, is over, but does not print the test page. The wireless is connected and show that it is working. Under settings, add printers, printers says "HP Officejet 6700 class Driver Error." I deleted and reinstalled the driver 3 times. Please notify.

  Hi @printeruser4455,

  Welcome to the HP Forums!

  I understand that you can not print with your HP Officejet 6700 printer on Windows 10 operating system. I am pleased to see that for you!

  I recommend you start by trying our HP print and Scan Doctor, to see if he can fix the problem automatically for you!

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP Officejet Pro 8000 Wireless: Download for Officejet Pro 8000 Wireless printer driver

  I've been looking for a printer driver download for my HP Officejet Pro 8000 Wireless printer, but unable to find one and the web page keeps just leading me in circles.  I'm under IE 9.0 and Windows 7 Professional.  Could you give a link to download the driver?

  See this:

  http://support.HP.com/us-en/document/c02266980

  or

  http://support.HP.com/us-en/document/c02693964

• After that upgrade to 8.1 Windows printer driver will not be installed

  I upgraded my Windows 8 to 8.1 Windows System. Subsequently, I received a message saying that I had to reinstall my printer driver, I went on HP website and downloaded the driver for Windows 8.1. First of all, I uninstalled all the software and the drivers are already installed on my computer. Then I tried to install the new driver. I received this message: "the system cannot find the file specified." I have downloaded the driver from the HP site again and tried to install it a second time, but got the same message. My printer is HP Officejet Pro 8500 Wireless. Everyone knows about this problem?

  Hi lpage1975.

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Sorry to hear that you are having problems with getting your Officejet printer installed on your computer. I did some research on this problem and I found that you could be affected by a conflict with the old drivers and the new. The best way to remedy this situation is to download and run HP Officejet Pro software and driver removal utility. This utility will rub off any old HP software for your printer so that can do a clean install. Once you have all the old software removed, please click on the link for HP Officejet Pro Full Feature software and driver.

  Please let me know if you still have questions and I'll be happy to help you.

  Thank you for your time.

• HP Photosmart Premium C309g: 10 Windows printer driver for HP Photosmart Premium C309g

  Where can I find a Windows 10 driver for HP Photosmart Premium C309g printer?  I tried the Printer Wizard and it didn't work.  Thank you

  Thanks, it worked!

• Scanner HP Officejet R65 for Windows 7 driver

  I have a HP Officejet R65 all in one connected to my laptop via a USB cable to printer. I recently updated my laptop to a Lenovo G550 with Windows 7. I got the R65 works well as a printer in Windows 7 by selecting 'windows update' when performing "add new printer", as advised on this forum. But I was not able to find a driver for the scanner function work. Please can you advise me how to do this?

  Kind regards

  Edward

  I think I know now what the problem is. It seems that the Logilink USB to parallel converter cable, D - SUB 25-pin ((UA0054) supports only the basic functions of parallel printer and not to other functions such as the scanner.) The only way to get the scanner to work will be to find a more sophisticated connection.

  Thanks for all the help and advice.

• OfficeJet 4500 G510g: Windows 10 Driver not recognize OJ4500 via USB. does not scan

  After the upgrade to Windows 10 JO 4500 would print not scan. (From August 2015) completely uninstalled and reinstalled the latest driver. The Setup program does not recognize that the printer has been connected via USB (the button "Next" is never active). I was able to print but never able to scan.

  Launch the center of solutions results in:

  HP solutions Center can not run because your device installation is not complete.

  Today, on 20 October, I downloaded another driver updated (September 2015, 140_408.5), uninstalled all the previous HP printer software/driver and tried again. The pilot 'up-to-date' has exactly the same problem - not recognizing that I have now connected to the printer via the USB port (trying various ports on the PC) and never goes to the "following".

  I clicked the help button.

  1 said to confirm that the device is connected and powered. Click back to try again. No luck.

  2 says that "some hidden configuration commands not will be over." Click back, wait a few minutes for the installation of the unit is complete. No luck.

  3. Affirms that if the problem persists, check the troubleshooting section in the Readme on the CD-ROM. I have no CD so no luck.

  Then, I couldn't leave the Setup program except by using the Task Manager to kill the process running.

  I'm now able to print, despite the above experience.

  Since the center of Solution will not work, I tried Scan color of the façade. View of the front panel "no scan options".

  Does anyone have a solution for this?

  SOLVED.

  Downloaded HP Print and Scan doctor. Despite the fact that I had just downloaded the latest driver, the good doctor displayed:

  A later version of the software is available for this product.

  After downloading and installing, he recognized my USB printer connected and completed the installation.

  Now, I can scan.

  Panel, programs and features shows the version 14.0 rel. 6

  HP: Why East-exit 6 not on the download page, rather than to release 5 that I downloaded today?

• HP OfficeJet G85: 10 Windows messed up my printer

  I've updated to Windows 10 and now my printer prints half a page, then gets an error and stops. I ran the resolution of problems and he stated that the printer was plugged into a "USB 3.0' and plug it into a"USB 2.0 ". It's the same USB port, it's always been plugged. Windows 10 he change? How can I change this back? Or at least, how can I solve the problem?

  I know just enough about computers to be dangerous so please be friendly and accurate.

  Thank you

  Freeperkey

  Hi @freeperkey,

  Welcome to the Forums of HP Support! I see since the upgrade to the operating system Windows 10, you are no longer able to print to your HP Officejet g85. You get a ' USB 3.0 "and plug in a" USB 2.0 "message error, but you never changed the port.»

  Please go ahead and start printing HP and doctor Scan > www.hp.com/go/tools

  -It has been designed by HP users troubleshooting and problems characteristic needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Now, make sure that you have installed the appropriate driver, because there is no comprehensive software features and drivers available, you need to install the printer using the built in driver. See below:

  Install and use the built-in Windows print driver

  Be sure to check all of the FAQ that some of the features will be limited.

  How this work? You are now able to print?

  I'll watch for your reply.

  Thank you

• HP 915 all-in-one: printer driver for Windows 10

  Dear Sir/Madam,

  My printer model is HP 915 all in One.After check the compatibility of the printer with Windows 10, I could not find the printer my name in your list. I intend to update my pc Windows 10, which is currently on Windows 8.1, I really bad move to Windows 10, but the only problem is the printer driver.

  Please suggest a solution as soon as possible.

  I thank you and look forward to hearing feedback.

  If all goes well

  Mocanu

  Hi Mocanu,

  Looks like you're right. It might not be a complete driver of features still to the all-in one HP Inkjet 915, but looks like there could be a BONE or integrated driver, which you can download. Go to installation and using the built-in Windows print driver for the steps.

  Hope that helps!

• printer driver for hp psc 2400 on windows 8.1

  I have a HP psc 2400 printer running on Windows 7 now I bought a new laptop with windows 8.1 where can I find a driver down load for this new computer, so I can use the same printer on two computers, regardless

  You can use the Windows printer driver 2400 built 8.1.

• WINDOWS 8 DRIVER FOR MFC - 240 C PRINTER

  I cannot locate the windows print driver 8 for my printer MFC - 240 c.  This printer is compatible with windows 8? I went to the brother download site, but there are no drivers. Thanks for your help.

  Compatibility Windows 8 Center offers a diversity of opinion about the full compatibility with the MFC - 240 c. There are two voices for compatible and one speaker against. Report complete here.

                    

  Support Brother MFC - 240 c page site (here) indicates that the drivers specific to Windows 8 for the MFC - 240 c are available on Windows 8 or Windows Update. There is also a white paper about Windows 8 driver support available here.

• I need to install antivirus software on a virtual machine if I only use vm to a printer driver only for windows?

  Hi all

  Searched for an answer via Google and there, qualification so far found no.

  I am currently set up with Fusion 3.0.1/XP Pro on an iMac / Snow Leopard.  The only reason I use the merge on this machine is as follows.  We have a Sony SnapLab Pro UP_CR20L digital photo printer for our personal use.  Brief history on printer: these printers are sold on the commercial aspect of the site of Sony, generally used in kiosk, sales retail store settings.  Sony has provided only a Windows printer driver for this printer, so my need to use Fusion to print from my computer on the SnapLab.

  That being said, I don't want to use the virtual machine for anything other than this one function: printing photos to my photo on the side of Mac through XP for the printer folder.  No internet on the side navigation XP. Period.

  Can anyone offer upward not reasons to play with headaches run the anti-virus on the virtual machine software?

  Thank you all ~

  NONE.  Windows is not also subject to security as everyone seems to think.

  Firstly, Windows is that ALTHOUGH the user.  If you use this VM, and you surf the NET and download files, the USER is the reason Windows crashes, not Windows.

  Windows makes it EASY because you are an administrator rather than forcing users to degenerate into a user Admin Linux by default.

  So if you install Windows 2008 or Windows 7 leave the enabled user access mode, do not put the user Admins member and you will have NO problem.

  So no, YOU can't BC

• Need printer driver generic for Officejet 7210 all-in-one on Windows 8.1

  Updated my Windows 8 Windows 8.1, who took my print driver for an all-in-one Officejet 7210.  Tried to reinstall.  Error file not found.  Detailed monitoring of the process of a t-shirt (temp deleted files, deleted startup, programs).  Driver does not work but the printer does with other computers.  Printer is no longer supported and no help (but is in good working condition).

  I'm looking for a generic driver that will work with my printer and Windows 8.1.  I appreciate a lot of help...

  Hi LChristofaro,

  I have studied your error message and the Msiexec.exe error and this is a problem with windows install. I would recommend restarting your windows installer.

  To do this:

  1. run "Services.msc" (without the quotes).

  2. double-click on "Windows Installer" in the Services list.

  3. click on stop, and then click OK.

  4. Click Start, and then click OK.

  You restart the computer and try the installation again.

  Let me know if this helped.

  Thank you

• Print driver for OfficeJet 8500 A909a for Windows 10

  Having trouble getting my printer to work with windows 10. Do not really need the full software on this PC so just print driver would work. I downloaded OJ_AIO_P8500_A909_Full_Win_WW_140_408 - 5.exe several times and I still get the same results after installation. I deleted the printer several times in the section program & files windows. This includes all said HP in the system. After the installation of the printer does not work and I get a protection error when trying to enter in the properties of the printer. Any ideas on how to solve this problem or am I something wrong?

  @gxshow, suggset you trying to install the built-in drivers on win 10 OS. Please see below for the steps and video URLS:

  Support document: http://support.hp.com/us-en/document/c01796879

• levels of ink onto printer officejet K5400 with windows 7

  recently turned to a new computer with windows 7 and downloaded the compatible print driver 64 bit works fine but there is no tool more for ink levels and no way to determine which of the 4 ink ink cartridges when I get a message of ink out of.  print test page didn't help not-show not good, even when she ink give ink levels and all the boxes.  does anyone have a solution?

  Hello chickenman,.

  Hmm, ok. Let's try this:

  Open Windows Explorer and navigate to C:\Program HP Imaging\bin or C:\Programs\HP\Digital Imaging\bin. You will find a file called hpqtbx01.exe. That right click and select "Create shortcut" right-click on the shortcut you created and select Properties. In the area called target, add "HP Officejet Pro K5400 series" after the existing path if it looks like this: "C:\Program HP Imaging\bin\hpqtbx01.exe" 'HP Officejet Pro K5400 series' (note the space between the path and the name of the printer). It might be that for you, the name of the printer must be different because it must match what we call the printer in printers and devices, but if you have not renamed the printer after installing it just, you should be able to copy the above.

  When you use this shortcut to open the Toolbox, you should be able to see the ink levels etc. Place the shortcut on the desktop and rename it to something that makes sense, like Officejet Pro K5400 Toolbox or something like that.