HP Officejet 6000 e609a transport Jam

Similar Questions

• Don't print black ink (HP Officejet 6000 E609a Series)

  HP Officejet 6000 E609a Series - do not black ink print ---
  No warning light indicates low ink levels, so I called "solutions Center". The chart shows all cartridges, color and black to be virtually complete. I then replace the black cartridge with a new cartridge 920XL, thinking that the original could be defective. Same as before results! I (1) printed to a printer status report (2) print a print quality diagnostics page, (3) aligned the print heads and (4) cleaned the print heads, all to nothing does not. I even carefully cleaned the container for the black cartridge with a Q-Tip to collect a small amount of excess ink. Color cartridges are printing very well but the black cartridges will not print. (Either by the way, it seemed to happen suddenly, not gradually). I would be sincerely acknowledging all recommendations to solve this problem.
  Thank you... RP

  @ wespikard - here is a link to a document that addresses print quality problems of the model of printer that is mentioned in the first post of this thread. It will give you instructions to solutions that will attempt to correct the output quality of your printer. I hope this helps.

• HP Officejet 6000 E609a Watch series

  Hello

  Does anyone know if there is a way out of the standby mode [standby] for HP Officejet 6000 E609a Series?

  I looked on the internet for the last two hours and I can't find anything.

  Please help and thank you.

  There is no way to disable the mode standby on this printer. I went through the manual to the owner for you no options.

• HP Officejet Pro L7680 transport jam error

  When I turn on my printer, I get the following error

  Jam of transport

  Open the access door to print, clear jam and then press OK to continue

  I did what the message suggested, but I have not found a jam so I don't know what to do now.

  I have a HP Officejet Pro L7680 all-in-one printer.

  Thank you!

  [Personal information]

  Hello...

  PLS, click the link below for the resolution...

  Jam of transport

  Hope this will help... =)

• HP Officejet 6000 E609a - problems in color ink.

  I need ink colors, so I leave the old empty color cartridges in my HP Officejet.

  It worked quiet well until recent times: each print job - it starts or ends with a troublesome page of "free trial".  Aid official told me that they cannot help me. It will work if I put in new cartridges color...

  Is this true?

  Thank you

  Hello

  JO 6000 is an IIC based printer (individual ink cartridges). For many of them, all cartridges are needed for printing. More details in the link below...

  http://h10060.www1.HP.com/pageyield/articles/us/en/InkUseage.html

  Ciara

• OfficeJet 6000 E609a

  My E609A printer performs a second 40 self-clean cycle after every printing.  It wastes a lot of time between two jobs.  He should do or is there a fault.  I tried to reload the software as well as try the printer on anoyher PC.  Windows XP operating system

  Most of my printing is done in draft mode.  What I print only has no impact on the problem, each print is always followed by a cleaning cycle. (and has always been again)

  Thank you very much for your help and suggestions. I am now convinced that there is a fault.   I think I have to return to the vendor of any other action.

  Best regards.    ZS2CBW (Bruce)

• OfficeJet 6000 E609a will not print from Mac applications.

  I can print the HP utility diagnostics, but I can't seem to get any Mac application to print anything. The pages are always hang in the queue with an unspecified error. I tried ALL the recommended procedures for the diagnosis of this problem, but nothing has worked.

  I have proposed several times, and it often works.  Make sure that your OS X is healthy:

  1. download and install Mac OS X 10.6.8 updated Combo.
  2 download and install the Apple for Mac OS X v10.6 HP printer drivers.

• HP Officejet 6000 a: after far right stuck paper jam

  HP Officejet 6000 a and Windows 10.

  After jam paper and jam, clearing printer turn on, goes through current transport parks, start right, flashing lites power and resume. Doctor says print "general Printer Error. Transport to open the lid does not come to Center and did not manually move parked at the far right. Close the cover, flashing lites power and resume, press summary and unplug the power cord when the cart is centered. Remove print head, close the lid, back the start-up routine. Open the lid and now transport stops in the Center and all the lites normals. With lamp torch and lid open (with cardboard in photo electric switch) and print head installed in position, pressing on the set of the view CV under presses of subsequent print head print head to prevent fresh ink while the printer is in sleep mode, remove the cardboard (lid open simulating) tray does not move downwards releasing the print head. Has gone through all six steps of the Solution and no help. Impossible to open the case to observe the load mechanism. Nothing else to try? Printer purchased January 2011 and printed only 5003 + pages and no problems so far. Do not throw with using more than that most just bought full set XL HP 920HP cartridges. should be possible to solve other than maintenance workshop, can buy nine being the least expensive.

  Help, please. Thank you

  Jesse

  Hi @jlmulanax1,

  Welcome to the Forums of HP Support!

  I understand that this transport on your HP Officejet 6000 a printer does not move correctly. I will definitely do my best to help you.

  I would try the steps in Th guides, r HP Officejet 6000 (E609) and 7000 (E809) Wide Format Printer Series - an "impossible cartridge" or "incompatible cartridge" Message is displayed on the calculationand lights flashing on the HP Officejet 6000 (E609a) and 6000 (E609n) wireless printers.

  You describe it sounds like the transport has stalls and if this is the case and you are unable to find the obstruction while the transport mechanism is defective.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.

  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Hope that answers your question. Thank you for posting!

• HP officejet 6000: officejet e609a software

  Hi friends

  I'm at my wits end, I tried to install the software for the officejet 6000 E609a for two days. I continue to receive updates of pilot who want me to pay. I buy a printer of opportunity that I had loads of ink for this one and my laptop has broken with the software on it and I can't find the software for this printer anywhere. Please help I'll seriously crazy I know it must be something that I just miss, but I can't find the it. Help send me a link. I'm connectioning with a key usb and printer and windows can't find the driver and I can't find the download on hp, or anywhere else. Thanks thanks thanks a lot in advance

  Morag

  Hi @momogallas,

  Welcome to the HP Forums!

  I see that you are looking for the software and drivers for your printer HP Officejet 6000 e609a for Windows Vista to. I'm happy to meet you!

  To download the full feature software and driver, please visit this Web site, software HP Officejet full feature and pilot.

  This guide, the Message "Device not found" is displayed in Windows XP or Windows Vista during the Installation of USB, could help if you get stuck at all.

  Hope this is what you are looking for and have a great day!

• OfficeJet 4620 - stall of transport: transport Jam

  HP Officejet 4620 error: transport Jam. The print cartridge will not move...

  I get this error message, and the printer does not work.

  I watched the video of support, and there is no paper stuck or blocked anywhere, or any obstacle that I can find. I unplugged the printer, etc., as suggested. I can't always the printer to work. The carriage move not left by itself when I open the lid. I heard a noise of rattling after printing... I know that the video States if all else fails it may need service. But I was just wondering if there may be a few other simple fix, I forgot? The White Ribbon seems intact at both ends. The transport does not seem to move at all. I pull it to the left, and he stayed there after the closing and reopening of the coverage. I also removed all cartridges and reinstalled them.

  I called technical support... a new printer is shipped to me... thanks...

• HP Officejet 6000

  Use a model HP Officejet 6000 E609a - problem is not print: have cleaned the printer head and put on the new cartridges but still will not print.  None of the lights are flashing.  Having run out of options.  What could be the probel?  Is there anything else that could be done?  Thank you.

  Hi batch64,

  Welcome to the HP Forums!

  I see that your HP Officejet 6000 will not print. I'm happy to help with this problem!

  To get help, I'll need to know:

  1. If you use Windows or operating system Mac and the version number. To find the exact version, visit this link. Whatsmyos.
  2. If the printer can print a self-test report. Print a printer status report.
  3. If the printer is connected, wireless, or USB.
  4. If the power cable is connected to a surge protector, or directly to a wall outlet. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  I hope to hear from you and have a great day!

• transport jam f on Officejet 6310xi all-in-one printer

  I use an all-in-one HP Officejet 6310xi priniter.  I send the print command and when prinited sheet is delivered first four lines or are so prinitinig that half of the line and the message thenrerst prints OK.  However, after the delivery of the printed sheet I get message, "Transport jam" I received instruction of "open the door.  Clear jam and then press 'OK '.  How can I stop this from happening?  My operating system is Windows 7.

  Have you removed all paper from the input tray and shined a flashlight upwards in the status bar to ensure there is nothing caught in the rollers?  Remove the duplexer/rear access door and make sure that there is nothing in the rollers at the back.

  I would also check the printer.  The top and look down inside the right-hand side of the printer (right side of the carriage house).  Do you not see any paper into a ball in this section?

  There is also a document with steps to help fix a carriage jam in an Officejet 6310xi.  The document can be found here.  Let me know how it goes.

• HP Officejet 7310 transport Jam

  I tried all the recommended solutions and still cannot get it printed, he tries, but then I get the error message

  Jam of transport

  Door open, clear transport jame and then press OK to continue.

  Hello

  Please check if there is no paper stuck near the transport area. If found remove it.

  Also, check if you are able to manually move the carriage.

  If the truck moves automatically / manually, then we might have to reset the printer. Therefore, check your Inbox for the steps to perform the reset.

  If the transport does not move, the printer must be repaired.

• Officejet 6000 printing problems

  My Officejet 6000 will not print. The power and light of the resume light blink - normally, this means that there is a paper jam in which there is not. Or that the rollers need cleaning I did. I also cleaned the cartridges where the ink comes out.

  Also I tried to unplug the printer and try again without success. When the power is connected, the green light - after a few seconds it starts to blink and the printer goes into his routine of cleaning after this stop the Summary button illuminates and flashes also. I'd love to hear if someone has the same situation and managed to solve it!

  Have you removed all paper from the input tray and look in the status bar with a flashlight to make sure nothing is caught in the rollers?

  So, did you remove the module front/back/rear access door to make sure that nothing is stuck to the back of the rolls?

  I also advise to open the upper part of the printer and remove all of the ink provides unit; including the print head.  Don't you see that anything taken under/the print head Assembly all about?

  Hard reset of the printer with the supplies out of the unit:

  Unplug the unit when turned on

  Disconnect the other end of the power cord from the wall jack directly

  * Wait 30 seconds

  * Plug the unit back to

  Once the device is fed up reinstall ink supplies in the printer.  Also check to see if the truck can slide left and right all the way inside the printer by hand.

  There is also a document with additional steps found here.  I hope this helps.

• OfficeJet pro 6830: transport cannot return the cartridge access area

  I'm trying to set up my new printer 6830, but I got the transport Jam error message: "remove any packaging from inside the printer.» After all packaging is removed, turn the printer off and then turn it back on. "My new printer came not with the thing of white foam in the transport. And I think I've removed all the bands and plastic/foam of the printer as shown in the introduction the guide book. Could someone tell me where should I look for a package that needs to be deleted? Really appreciate any help.

  Hi Meiaja,

  Here is the link to HP customer care:

  https://support.HP.com/us-en/contact-HP/product/HP-OfficeJet-Pro-6830-e-all-in-one-printer-series/5390307/model/5390308

  Scroll down the page and you will find a support model to fill.  Once you fill out and click on 'Show the Options', you should get an option to call the help desk with a no of cases.

  I don't know the policies of Tiger Direct.  They can cover the cost of shipping, or they may not.

  I would call 1 HP customer care.

  Jean