OfficeJet 6000 E609a

My E609A printer performs a second 40 self-clean cycle after every printing.  It wastes a lot of time between two jobs.  He should do or is there a fault.  I tried to reload the software as well as try the printer on anoyher PC.  Windows XP operating system

Most of my printing is done in draft mode.  What I print only has no impact on the problem, each print is always followed by a cleaning cycle. (and has always been again)

Thank you very much for your help and suggestions. I am now convinced that there is a fault.   I think I have to return to the vendor of any other action.

Best regards.    ZS2CBW (Bruce)

Tags: HP Printers

Similar Questions

  • Don't print black ink (HP Officejet 6000 E609a Series)

    HP Officejet 6000 E609a Series - do not black ink print ---
    No warning light indicates low ink levels, so I called "solutions Center". The chart shows all cartridges, color and black to be virtually complete. I then replace the black cartridge with a new cartridge 920XL, thinking that the original could be defective. Same as before results! I (1) printed to a printer status report (2) print a print quality diagnostics page, (3) aligned the print heads and (4) cleaned the print heads, all to nothing does not. I even carefully cleaned the container for the black cartridge with a Q-Tip to collect a small amount of excess ink. Color cartridges are printing very well but the black cartridges will not print. (Either by the way, it seemed to happen suddenly, not gradually). I would be sincerely acknowledging all recommendations to solve this problem.
    Thank you... RP

    @ wespikard - here is a link to a document that addresses print quality problems of the model of printer that is mentioned in the first post of this thread. It will give you instructions to solutions that will attempt to correct the output quality of your printer. I hope this helps.

  • HP Officejet 6000 E609a Watch series

    Hello

    Does anyone know if there is a way out of the standby mode [standby] for HP Officejet 6000 E609a Series?

    I looked on the internet for the last two hours and I can't find anything.

    Please help and thank you.

    There is no way to disable the mode standby on this printer. I went through the manual to the owner for you no options.

  • HP Officejet 6000 E609a - problems in color ink.

    I need ink colors, so I leave the old empty color cartridges in my HP Officejet.

    It worked quiet well until recent times: each print job - it starts or ends with a troublesome page of "free trial".  Aid official told me that they cannot help me. It will work if I put in new cartridges color...

    Is this true?

    Thank you

    Hello

    JO 6000 is an IIC based printer (individual ink cartridges). For many of them, all cartridges are needed for printing. More details in the link below...

    http://h10060.www1.HP.com/pageyield/articles/us/en/InkUseage.html

    Ciara

  • HP Officejet 6000 e609a transport Jam

    Hello.  I use this printer-e609a via the local USB port on my 32-bit XP machine.  Everything has been working great.  The last time I went to print, was advising me of a paper jam.  I have rempoved the paper tray and I checked carefully, and there is no paper is located.  I followed all the troubleshooting steps.  What I notice is that when I opened the top, the carriage does not move to the Center.  He begins to move, and then stops.  I have unplugged the printer and tried to manually move the carriage.  I can shoot right to the end, but when I try to move it left, it will come to a point and stops.  I can not move in the Summit area.  I do not see the obstructions, but I can also see behind the cart.  Is - this toast to printer?  It is out of warranty.  Is there another way to move the cart?  Thank you very much for the help.

    I solved the problem.  I have chunked the printer and got an Epson.

  • OfficeJet 6000 E609a will not print from Mac applications.

    I can print the HP utility diagnostics, but I can't seem to get any Mac application to print anything. The pages are always hang in the queue with an unspecified error. I tried ALL the recommended procedures for the diagnosis of this problem, but nothing has worked.

    I have proposed several times, and it often works.  Make sure that your OS X is healthy:

    1. download and install Mac OS X 10.6.8 updated Combo.
    2 download and install the Apple for Mac OS X v10.6 HP printer drivers.

  • HP officejet 6000: officejet e609a software

    Hi friends

    I'm at my wits end, I tried to install the software for the officejet 6000 E609a for two days. I continue to receive updates of pilot who want me to pay. I buy a printer of opportunity that I had loads of ink for this one and my laptop has broken with the software on it and I can't find the software for this printer anywhere. Please help I'll seriously crazy I know it must be something that I just miss, but I can't find the it. Help send me a link. I'm connectioning with a key usb and printer and windows can't find the driver and I can't find the download on hp, or anywhere else. Thanks thanks thanks a lot in advance

    Morag

    Hi @momogallas,

    Welcome to the HP Forums!

    I see that you are looking for the software and drivers for your printer HP Officejet 6000 e609a for Windows Vista to. I'm happy to meet you!

    To download the full feature software and driver, please visit this Web site, software HP Officejet full feature and pilot.

    This guide, the Message "Device not found" is displayed in Windows XP or Windows Vista during the Installation of USB, could help if you get stuck at all.

    Hope this is what you are looking for and have a great day!

  • HP Officejet 6000 a: after far right stuck paper jam

    HP Officejet 6000 a and Windows 10.

    After jam paper and jam, clearing printer turn on, goes through current transport parks, start right, flashing lites power and resume. Doctor says print "general Printer Error. Transport to open the lid does not come to Center and did not manually move parked at the far right. Close the cover, flashing lites power and resume, press summary and unplug the power cord when the cart is centered. Remove print head, close the lid, back the start-up routine. Open the lid and now transport stops in the Center and all the lites normals. With lamp torch and lid open (with cardboard in photo electric switch) and print head installed in position, pressing on the set of the view CV under presses of subsequent print head print head to prevent fresh ink while the printer is in sleep mode, remove the cardboard (lid open simulating) tray does not move downwards releasing the print head. Has gone through all six steps of the Solution and no help. Impossible to open the case to observe the load mechanism. Nothing else to try? Printer purchased January 2011 and printed only 5003 + pages and no problems so far. Do not throw with using more than that most just bought full set XL HP 920HP cartridges. should be possible to solve other than maintenance workshop, can buy nine being the least expensive.

    Help, please. Thank you

    Jesse

    Hi @jlmulanax1,

    Welcome to the Forums of HP Support!

    I understand that this transport on your HP Officejet 6000 a printer does not move correctly. I will definitely do my best to help you.

    I would try the steps in Th guides, r HP Officejet 6000 (E609) and 7000 (E809) Wide Format Printer Series - an "impossible cartridge" or "incompatible cartridge" Message is displayed on the calculationand lights flashing on the HP Officejet 6000 (E609a) and 6000 (E609n) wireless printers.

    You describe it sounds like the transport has stalls and if this is the case and you are unable to find the obstruction while the transport mechanism is defective.

    If you have completed all the above steps and your product still has a problem, service the product.

    Contact HP for service in all countries except Asia-Pacific.

    First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
    Cost of repair out-of-warranty printers may apply.
    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number
    File number and phone number are displayed.

    Hope that answers your question. Thank you for posting!

  • HP Officejet 6000

    Use a model HP Officejet 6000 E609a - problem is not print: have cleaned the printer head and put on the new cartridges but still will not print.  None of the lights are flashing.  Having run out of options.  What could be the probel?  Is there anything else that could be done?  Thank you.

    Hi batch64,

    Welcome to the HP Forums!

    I see that your HP Officejet 6000 will not print. I'm happy to help with this problem!

    To get help, I'll need to know:

    1. If you use Windows or operating system Mac and the version number. To find the exact version, visit this link. Whatsmyos.
    2. If the printer can print a self-test report. Print a printer status report.
    3. If the printer is connected, wireless, or USB.
    4. If the power cable is connected to a surge protector, or directly to a wall outlet. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

    I hope to hear from you and have a great day!

  • OfficeJet 6000: OfficeJet 6000 does not print

    Replace the ink cartridges for Officejet 6000 would not print.  It prints the words Page Windows printer to test a test page of color with a printer icon in the upper right, then at the center of page 4 with a white fill boxes; yellow fill, blue fill and a red fill.  That's all.  I touched a "print test page" and the paper comes out blank, although that normally shake it like the print head moves back.

    Hello @Pistol_shooter, greetings!

    Thank you access the Forums from HP Support for extra support! I see that you are having problems printing using the Officejet 6000. I will do my best to help you with this problem.

    I suggest you first check the empty ink to ensure it is enough ink. Then proceed to clean the print head using the software installed on your computer. Since your computer desktop, double-click the printer icon, the printer wizard / solution Center will open. Go to settings and navigate to the cleaning of the printheads.

    I found a wonderful document that gives you instructions step by step to solve this problem. Please visit: http://hp.care/2dtFaXe

    Please let me know if that solves the problem. Good luck!

    See you soon

    Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

  • OfficeJet 6000: Officejet 6000 'stuck' in the wireless status

    After using the printer on a minitour HP with a USB connection for a while, I installed the software on a Thinkpad with a link wireless to a Linksys router. The combination didn't work reliably, so I removed the printer and the laptop software. However, the Officejet seems 'stuck' in a State wireless (blue light on); When I tried a clean reinstall on the minitour (from disk), the installation failed. How can I restore the printer to its out-of-the-box condition and get a clean install with USB connection?

    (I thought the Officejet 6000 is a dual-mode device, but it seems to be either / or machine.)

    Price Buhrman

    Hi BuhrmanP,

    This is the only information available for this model restore network settings.

    This information was given by the manual, page 377. OFFICEJET 6000

    I disable all startup programs and temporarily disable the Antivirus software before installing the printer to see if it will help.

    How to perform a clean boot in Windows.

    I hope this helps.

    Thank you.

  • HP Officejet 6000 609(a): Officejet 6000

    I now want to use this printer for black and white text only. This 920 cartridge needs to be replaced and all colour cartridges show as empty.  I didn't print in gray scale and do not use colors for awhile. Can I just replace this cartridge black & white and forget the colors? as these are expensive to replace, and I'm not going to use them?  I don't want to make this investment in color if possible with this printer Officejet 6000 609(a).  Thanks for the tips!

    I just bought the Multipack cartridges at great expense... but just for a test before it is replaced, I printed a Test Page.  The old B & W ink cartridge works perfectly, although the colors were very thirsty (I don't need them anyway).   It is a strange behavior, like the last time that the printer has been tried on a document, the results were so washed out as unreadable.

    So, "if it ain't broke, don't fix it" applies to me.  Moral: my printer will get the long OK until it is absolutely out of B & W. Then all of the cartridges will be replaced if necessary.  The box has a long service life ).

  • Cartridge, HP 920 XL: Wireless HP Officejet 6000, the problem of black ink printer

    I have a HP Officejet 6000 wireless printer.  It's 2nd HP 920 XL cartridge that has not worked.  It does not show that it is empty, but it will not be printed.  Our school cannot afford to replace these at this rate.  Please let me know what to do to make this work correctly.

    I removed the printer as my default so that I could use another printer.  When I ran the program again to check for problems, the guest asked me to add the printer returned as default.   When I reconnected it the printer as long as my default, I tested the printer and it worked.  Don't know why remove and then add back in the set, but he did.

  • Officejet 6000 ink

    I have an Officejet 6000 ink and i ' ts was set up to print only in black.  The other day he had run more black ink and to my great surprise, he was also out the other colors of ink.  I bought a new cartridge 920xl and to my surprise that has not fixed the problem.  So the question is that I have all the work ink cartridges can get this printer to print again... ?? .. . If so that was a waste of money by buying the black cartridge, because it costs more than the ink, then what I paid for the printer.

    I'm sorry that you are experiencing this problem with the black print cartridge and printing. You need to replace all the other cartridges so that the printer to print to.

    Some older printers mode allows to print with just black only, but it does not work. Even if you want to print in BLACK ONLY, your color cartridges still used to mix with black to form a TRUE COLOR BLACK. It's only a small amount of each used cartridge, but after awhile, it will need replaced.

    So will have to get the other cartridges back, until the printer reverts to the normal state and printing.

  • HP OfficeJet 6000 Wireless: can I use AirPrint on a wireless HP OfficeJet 6000, model C9295A

    My iPad can not find my HP OfficeJet 6000 wireless, try using AirPrint. This printer can use the AirPrint? I have to update to firmware maybe?

    Hello

    Your printer is not on the following list:

    https://support.Apple.com/en-AU/HT201311

    and not in the following list:

    http://support.HP.com/us-en/document/c02814760#N4001

    You can try:

    http://iTunes.Apple.com/au/app/HP-eprint/id299531647?Mt=8

    Good luck.

Maybe you are looking for

  • Help I tried to get paypal to work as a payment...

    Hello I tried to use paypal as payment method, I did the Itunes and went to my account and it starts but nothing that I have to wait for paypal to aprove of it?

  • HP Pavilion dv7-6166nr USB 3.0 does not work

    My two USB 3.0 ports left do not work. In Device Manager it can't find the drivers for them.  I searched the forums, tried other drivers, tried the drivers for the latest drivers from Renesas USB 3.0 Host Controller and those who do not work either.

  • Update error 80070246, 31 updates won't install

    I'm having absolutely no chance to fix this problem. I tried the fixes mentioned in these forums without success. I also deleted and re installed my antivirus. I have an Acer laptop with Vista preintalled if I do not have the Vista disc.I am concerne

  • Found blackBerry Smartphones pocket computer

    When I plug my Blackberry on my computer with the USB cord, my Blackberry says: "current USB support is not enough.  Check that your Pocket PC is connected to a powered USB charge source and that the appropriate USB driver is installed. » I tried to

  • Why Microsoft cannot put a 64-bit version of Cardfile.exe?

    How to get Windows 7 to recognize my IV ' e cardfile program used for years? Is there a program out there that is similar?