HP officejet 6210 all-in-one

Similar Questions

• HP officejet 6210 all in one fax

  HP officejet 6210 all-in-one, fax not send fax with Vonage phone, I'm sure that most people have no problem, what should I do to fix this? Help, please

  I'm sorry that you are experiencing this issue. The fax works with Vonage, BUT it doesn't really work that well. This may sometimes work, it may not.

  Vonage is a (VOIP) Voice Over Internet Protocol. It has many transmitters communicate in both directions and can cause the interruption between the lines. You can try some steps, but it may not always work.

  1. go in the settings of your Fax

  2. change your Error Correction Mode (ECM) - OFF

  3 set the fax speed to slow DOWN

  Make sure it is properly connected.

  1 LINE 1 at the rear of the printer goes directly to LINE 1 of the Vonage modem (or wall plug)

  2 LINE 2 goes directly to the phone.

  Hope this helps. Let me know what happens.

• HP Officejet 6210 All in One not working with Snow Leopard

  Downloaded SL yesterday and all of a sudden I cannot print.  It is considered to be one of the compatible printers.  I did a print test and it worked, but none of my apps (Word, Safari, etc.) will be printed.  I have checked my selection of the pilot, system information, deleted the driver, reinstalled the driver (from the MAC disk supplied with the printer), unhooked and rehooked everything, restarted my computer, etc.  Can't seem to connect my printer to my applications, even though the MAC in the preferences system, etc., seems to recognize it.  Any ideas?  Thank you

  Tried all of this.   Didn't work unfortunately but thank you for trying to help.  Finish reloading Snow Leopard all over again and that seems to help to deal with many problems.  Don't know why reload solved a lot of problems but at least I can print in Word which was what I really need at the moment to get a project.

  Thanks again!

  S4Girl

• I just connected the hp officejet 6210 all-in-one printer and it won't let me scan.

  Message on printer: "You must run or install software device" I just installed in my computer and cannot parse. I don't have the software because the printer has been givin to me.

  Hello

  You need to install the complete software to activate "scan to computer".

  You can get the drivers here

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=391210

• HP Officejet 6210 All In One prints only on the left side of the page

  After good results, I tried to print a "retail Transaction" of Quickbooks account form twice with the same result:

  info. prints only on the extreme left, a straight line down...   I did adjust the paper tray.  What could be wrong?

  Thank you for your time and your advice.

  Texas-sleeper

  Salvation to the texas-sleeper,.

  I understand when you print from Quickbooks print right on the left side.

  I'll be happy to help you.

  In the program you are trying to print from, click file and then click on print. The print dialog box opens.
  Select your printer, click printer properties or properties.
  Click the paper/quality tab.
  In the press or type click on the dropdown menu, select the type of paper that matches the paper loaded in the paper feeder and the desired print quality, paper size, select the correct size of paper.

  Make sure that the appropriate paper size is also selected in Quickbooks software.

  Try printing a different file where this file is corrupted or damaged.

  I have provided a document of Quickbooks print does not correctly.

  Solve common printing problems.

  Try printing from another application to see if there a software problem with the printer or application you are printing from.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Good day!

• Office HP jet 6210 all in one error r

  my hp officejet 6210 all in one giving me the following message appears on the screen of my computer when I try to scan a document. "reinstall the software photo & imaging and try again" when I use the installation disc keys that it not allow me to complete the installation even with me being the administrator of the pc!

  I'm going to post you a link to a post from Shane_R that describes the uninstallation steps that I think could help clear on issues that may keep to complete the installation.

  Version 14 software and full scrub for no HP computers only below steps

  Here is a link for the drivers for your printer.  Click here

  Before starting the installation, right-click on the program and select "Run as Administrator", even if already logged in as an administrator.

  Let me know what happens.

  Good luck!

• 6210 all-in-One printer: European-sold printer does not accept the United States-have sold cartridges

  Hello

  I need advice to fix this... My printer (HP Officejet 6210 all-in-One Printer) that I bought in Europe does not accept the cartridges sold US. The printer identifies the cartridge 94 as incompatible. On the site of HP 94 cartridge is listed as being compatible with this printer (the original cartridge is 338). It seems that I need a new printer? It still works perfectly. Should I try other types of cartridges?

  Thank you.

  You will need to Contact HP to ask a "regionalization Reset." Do not charge for this, it is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works.

• HP Officejet 6210xi all-in-one: a HP Officejet 6210xi all-in-one printer can be connected wireless?

  does anyone know if the hp 6210 xi all-in-one can be converted into a wireless printer as well as a wifi network can access and mobile devices?

  Hello

  The HP Officejet 6210xi is one USB printer, it does not offer nay network connectivitu and along such a is not supported.

  You can find the printer specifications below, as listed in section system requirements only a USB port is available for the printer:

  http://support.HP.com/us-en/product/HP-OfficeJet-6200-all-in-one-printer-series/391210/model/391212/document/c00228331#AbT0

  Shlomi

• HP Officejet 7310xi all in one: printer keeps repeating transport jam

  My printer do not print and indicates a carriage jam and told me to open the door and a cart clear jam but there is nothing there, and there is no paper jam. I tried to unplug the machine, its restart, restrting my MAC and the message still flashes. Does anyone have any suggestions. I know this is an old printer, but I love it and want to keep it going. Thanks in advance for any ideas.

  Hello

  Please visit the link below to fix the problem

  http://support.HP.com/us-en/product/HP-OfficeJet-7300-all-in-one-printer-series/391181/model/391190/document/c00304007/

• HP OfficeJet J4580 all-in-One: OfficeJet J4580 all-in-One printer driver missing after recent update Windows 10

  After a recent update of Windows 10, my printer has stopped working. The message is that there is no driver. I tried to download the software from the website of HP and installation, but nothing changes. Copy and scan from the printer functions still work, but I can't print anything my file or on the Web.

  Hi @DMT1,

  Thank you for visiting the Forums from the HP Support! Good day.  I understand that you are looking for help with your printer that does not print after an upgrade of Windows 10. It will be a pleasure to help you here.

  You did your little comments and research before you post your question in the forums of HP. Kudos to you for this.  You're an HP customer, and we greatly appreciate you for doing business with HP. I take it as a privilege to share this platform with you.

  First, to help you better and for more clarity, please let me know if you get an error message when printing, or it just doesn't print at all?

  Some links that might consult to try to resolve the problem:

  Link 1: http://support.hp.com/us-en/product/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645099/document/c04714314

  Link 2: http://support.hp.com/us-en/product/HP-Officejet-4610-All-in-One-Printer-series/5101228/model/5101230/document/c04658195/

  Link 3: http://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/hp-officejet-j4580-all-in-one-printer-does-not/4cf1c8a0-eebc-48f6-bfe5-8a537465b4eb

  I hope this helps. I would like to know how this happens. I hope that the problem is solved without

  disputes and the unit works very well. I'm always here for you help. Please reach out at any time.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Take care now and have a wonderful week ahead.

• HP Officejet 4500 All - in - One-hp officejet 4500 G510g P:

  Stampante Ho Una HPofficejet 4500g510g,.

  by the prima volta ho usato stessa cartucce Originali my ricaricate...

  Can Dell... MENTRE lampeggia it pulsating; Sul display e camera Che sta esguendo Dell MA closed... no fa niente!

  Ho tried ha resettarla... iniziando at Una focopia, sul device display "in copia" ma no lo fa...

  riceve i Comandi dal calcolatore, not li can...

  E ' da 4 anni Che C ' e Ho, quindi senza Assistenza...

  No Yes Cosa Posso fare...

  Hi @maryf78

  If you are using HP original cartridges on your Officejet 4500. Have you tried to clean the contacts of the cartridge and the contacts on the printer?

  More details in the link below...

  http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---G5/3919445/model/3919447/document/c01953073/

  

  

• All-in-one HP Officejet J4550: hp officejet j4550 all-in-one

  My moms computer was installed by my father and already the installation of the printer. She then began having some problems when printing lines by slots empty words in words. I tried cleaning the printer option, but that has not worked, also tried the alignment of cartridges but that also had problems, sometimes it could not detect the scanner test sheet and then we would say a mistake and return to the default settings. I was then going to the computer application, but he missed. I guess that when it was installed, it was not a complete installation.

  I then started to re - install from the cd without uninstalling it first. Thought it would be OK and just replace the existing files. Sometimes, this works for programs and sometimes you will need to uninstall first. When I loaded the cd it says that this version of windows was not compatible. Then, I searched the net and found this thread of Hp.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/Windows-7-and-OfficeJet-J4550-install/...

  I downloaded the new installation for win 64 files and down them, before he installed it there was an error (empty white error with a red x) and it wouldn't install. Then sent information to HP and said it has found a solution and downloaded to the desktop. Basically, he wanted to fix my installation but unplug the printer. So I did this and it worked fine during installation. Then when he got at the end during the setup I got a fatal error. Something about the configuration has expired or has been too long and we also found several files of HP. So he started to uninstall itself. I thought having bad uninstall programs, then put it back. So I did, worked well until the config part and then he did the time out or another error. The mistake of never came however duplicates. So I cancelled as fast as I could. I can print and scan from the program on the pc. But it lacks the features of the printer itself. As if I hit him scan it tells me to consult the manual. I just want to complete installation work. Any thoughts?

  I did all the steps, downloaded the packgage, uninstalled using l3.bat, did drop cleanboot, reboot, update adobe Flash Player as well as cleaning. Download the hp installation wizard. When running the wizard, it says there is a problem with my driver, then it starts to connect to the internet to download the software, but then said the download was cancelled, click Retry to try again but the retry button does not work. I have mcaffee AV, the only way ive seen turn off is to disable on the analysis of access and the firewall.

  Don't you have an another clean boot and no driver error, but the same error message when the installation wizard attempts to download the full software. Simply use the version of the software from the link has me http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645096#Z7_3054ICK0KGTE30AQO5O3KA30R1

  FINALLY HE GOT WORKING:

  Downloaded the basic print and scan driver package, ran the installation and it did not work. I started to think there must be a driver problem. Had similar problems with itunes where it wouldn't read my ipod even after an uninstall and reinstall. And for that I had to remove the driver and reinstall it, for some reason any it was causing problems.

  Make sure the name is exactly the same as the folder. After its extraction do the same for the complete package. After extraction, a HP screen may pop up, just close for now.

  1. If the printer software is installed, uninstall it.

  2. with the connected printer go to devices control panel\ Manager, right click on your printer and click on uninstall. Check the box in the lower right corner that says something like "Do you want to remove the software driver or files" then click on uninstall.

  If box is displayed, and then click cancel, right-click on your printer and select Properties, click on the driver tab at the top, then the Details button pilot. make a new file .txt on your desktop and enter in all of the files and the locations of eveything that appears. After that click OK, then driver tab, click on uninstall.

  Here are some of the files and locations but check they are all listed and not missing anything.

  c:\Windows\system32\drivers\usbscan.sys

  c:\Windows\system32\hpotscl1.dll

  c:\Windows\system32\hpowiav1.dll

  3. open a new file and copy and paste the address of each file in the search bar. It will look something like this

  c:\Windows\system32\drivers\usbscan.sys

  before hitting enter each need to be edited windows otherwise think you try to open the file rather than access the folder. So for the modified example will look like this

  c:\Windows\System32\Drivers

  the drivers folder is what you want to be in and the usbscan.sys is the file you want to check is removed. Do this for everything in your list. If the files have disappeared that has, if not manually delete them or move them to a new folder on the desktop until installation is complete just in case.

  4. (computer may or may not need to be restarted) and then unplug the printer, open the software package and the base driver and double-click setup.exe. Do the installation and when it asks you to connect the printer.

  5. after its installed according to your needs, you can either test its features to see if it has what you need or you go to install more packages / programs from the full version.  Double-click setup.exe for the full package, then it will ask you that you if you want to uninstall or install more software, select the installation of the software. He can just show 1 or maybe a little. If its does not display those you want to click on the buttons more or less recommended until you find what you are looking for. You can try to install more then one at a time, but for me it did not work, I had to do one at a time.

  As far as the folders on the desktop used for extraction, it is a good idea to keep those with your backup files unless you use a restore image, but it good to keep because the backup even images may have problems. I would recommend save their be on a cd/dvd, USB drive, external hard drive, the cloud storage lol somewhere just in case you need it again as well as installation instructions. If you have moved all the files in the driver instead of delete and your printer now works, you can remove them.

  NOTE: If keeping the package for later use, Exchange compressed files for those who have been extracted because they take less space. Unless you want to just the ones extracted. (Compressed are those you downloaded from HP in the folder downloads, extracts are those in the office used for installation folder.)

  And thank you Gemini02 for helping me with this.

• I lost the CD start to my officejet 5510 all-in-one printer

  I fell off my PC under Windows XP and my old printer hp officejet 5510 all in one laptop no longer works. I can't find my CD to reinstall boot. Is that why I get an another boot CD or a way to get this printer working again?  Thank you for your help, Sue

  You can download the full software for printer you in the section to download the software and drivers of the Portal of support for your printer.

• HP officejet J4540 all-in - ONE: fax

  When you try to fax with my hp officejet J4540 all-in - ONE I hear the tone, the display shows fax is connected, but I get always a message "fax send failed". I ran a fax set up the test and everything passed. The question might be the telephone line in my house? Phone company put a new filter on the fax line and he sent a fax that day, but none after that. He always says "fax sending failed.

  Hello

  Please contact us. I understand that you are unable to send faxes from your printer.

  You can follow the steps mentioned in the document.

  http://h20565.www2.HP.com/hpsc/doc/public/display?calledBy=Search_Result&docid=emr_na-c01670414&docLocale=en_US

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.* *.

• HP Officejet J4580 all-in-One: I just need a disc from the drive, please!

  OS was wrong?

  Hello

  The disk may be too old now. If please download and install the following software and driver:

  http://ftp.HP.com/pub/softlib/software10/COL22247/MP-58704-2/OJJ4500_Full_10.exe

  More resources:

  http://support.HP.com/us-en/product/HP-OfficeJet-J4000-all-in-one-printer-series/3645081/model/3645099/drivers

  Kind regards.