HP Officejet 6450

Similar Questions

• Cannot complete Set Up resettlement Officejet 6450 with Mac and N Cisco router series

  I have been using - no problem - my printer wireless HP Officejet J6450 with my Mac OS X Snow Leopard. Months later, I upgraded my Mac to Lion.

  Recently died my router (Netgear G series) and we had to install and to set up a new-(series N Cisco). Now, I am unable to complete the Set Up for my HP printer. Everything is fine until I get to the final installation and it says unable to complete.

  I have been dedicated to support Apple and update of my Mac, hoping their work around go possible, but to no avail. Grateful for the help! Thank you!

  I got it, I got it, I got it!

  The last whim, it's that I didn't know that I had to install the network on the printer! Once I did and ran the setup of the new wizard it worked! You helped make my WEEEEEKKK! Thank you so much. Wish I could give you 200 Kudos. I would!

• OfficeJet J6450 - printer connects wireless but does not print job cable modem replacement

  Material: My printer is an OfficeJet J6450. I am running Windows Vista, current update.

  Probably triggering the event: I replaced my modem docsis 3.0 with a doscis 2.0 modem. PSI has remained the same. All other software and firewall remained the same.

  Dysfunction: After the replacement of cable modem, I found that I could print is no longer in my HP OfficeJet 6450. I would get an error in the printer window ' error - print. "  After the reboot after the publication of the initial error, I would get the error "error - sent to the printer.

  What I did:

  As a first step, I've uninstalled and reinstalled the HP software for the printer (complete package with exception of PhotoSmart and HP customer monitoring program).

  Use the connection for the network printer wizard, I entered the router password wireless to the printer. At first I don't have a connection. Then I rebooted the computer and the printer. I also returned to the default setting of network on the printer and repeated the configuration of the network. The connection was finally successful.

  The automatic test of the network page and the network printer wizard confirms the connection. Digital display of the printer and the HP diagnostic utility has also confirmed the connection. But the diagnostic utility is unable to print a test page and throw an error - "Print Test failed.

  The result disappointing:  I still can't anything to print wireless.

  ... Thanks in advance for your suggestions to get my printer back on...

  Go to start > Control Panel > printers and delete all instances of the printer.

  Then re-add the printer:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.  Get IP address of a Test of Netowork wireless on the front of the printer (usually in the network menu).
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• HP OfficeJet Pro scan is no longer with Sierra

  I am running OS X Sierra on 2012 MBA with an HP OfficeJet Pro 8600 printer / scanner.

  I noticed that after the upgrade to Sierra that the scan function no longer works... I tried to uninstall / reinstall the device, but the problem continues... I have checked the Apple Web site and notice that the HP OfficeJet 8600 is listed as a compatible scanner.

  I note also that the 8600 OfficeJet is connected as a printer via WiFi network and worked perfectly with the captain.

  With:

  1 has anyone else experienced this problem?

  2. What if anyone has found a solution / workaround?

  TIA,

  Joel

  responsibility to provide drivers to work for an update of the OS is with the developer of this device, not Apple. visit the page of the developer for your make and model camera and see if they offer drivers, otherwise contact the developers. Apple will sometimes provide printer drivers, but if a device is a legacy printer the developer may choose to retire it from use.

• Using the function of scan macOS Sierra HP Officejet 7300 series network printer does not work; He had no problem with El Capitan...

  Printer HP Officejet 7300 network series that allows to work flawlessly with El Capitan does not work after the upgrade to Sierra.

  With macOS Sierra, when used as a network print service printer works fine however scan does not work. Programs like the Image Capture, HP Easy Scan etc does not see the printer. However, if the printer is directly connected to the Macbook Pro using the usb cable, a new printer is added to the list of printers (it shows print and scan functions while the printer network in the list shows only printing function) and the scanner works well with Image Capture, etc. If the usb cable is removed disconnects this printer in the list and there is no way to turn it on. I have the latest update for the printer installed from the App store. It looks like a driver issue, but I wonder if there is a work around for this problem...

  Open Preview.app. Under file in the menu bar, you see import of 'name of your scanner?

• need to find software to download HP Officejet 6500 more e-All-in-One-E710n-z a

  HP does not print. called apple support and deleted driver. now I'm unable to find the driver to download on iMac there.

  HP Officejet 6500 more e-All-in-One-E710n-z a

  Help, please

  Thanks marianne

  You need to access the support Web site HP and search for a driver for your printer, then download it from here.

• Problem drivers 5.0 HP printers Officejet 4500 G510n-z

  Hello

  updated drivers HP 5.0 from August 30. 2016

  Since then attempt to use the results of scan in "waiting for scanner ' for the ages or error of-9923. (This Officejet 4500 is a wifi printer)

  Generally, I use an extract and import from a scanner in the menu file, in which the printer is visible.

  Removal and reinstallation of the HP printer has not solved the problem.

  Did you notice similar behavior?

  Greetings to all.

  Same here :-( I had to buy a cable USB A to B USB to connect the printer/scanner directly on the Macbook, at least that, it works... always looking for a way to bring my analysis via WLAN...

• HP Officejet 4500 G510n Scan via airport utility?

  How can I get my HP Officejet 4500 G510n to perform a SCAN using airport utility?

  Airport utility is not related to operating an MFP. It there is no scan via airport utility function or any what router airport. That is, the printer must be connected through its network and NO USB connection to the router. What is the Airport base station is the printer is simply a network client. No printer function any is active via the airport.

  You must install the drivers HP and the complete software for any OS that you are running on your computer.

  http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---G510/3919445/mod ele/3986394/document/c0...

  It's the HP drivers and software that will allow you to scan over network. Or if NOT, maybe... often scanning on network is problematic.

• A HP Officejet H470wl will work with the MacBook Air

  A HP Officejet H470wl will work with the MacBook Air? The driver is still supported? I'll buy an Air.

  Hello..

  New Mac come with v10.11.x El Capitan pre installed.

  I checked for compatible drivers (software) for pinter them HP > http://support.hp.com/us-en/product/HP-Officejet-H470-Mobile-Printer-series/3434 453/model/3434454/document/c04510394 /

  Fact on the Mac, you would use Software Update to install the drivers according to the HP website.

  Printer and scanner software available for download for your Mac

• OfficeJet HP 6968: officejet hp 6968, turn off the ringer

  Is it possible to turn off the ringer on an HP Officejet 6968?

  Thank you

  Hello @Kathieh3,

  The steps I have mentioned must be done on the printer screen, not on the computer.

  On the printer screen, press 'Fax'-'settings'-'fax advanced settings'. Once you scroll through the menu options, you will find the "ringing" or "ring volume" option. Select, then reduce the volume.

  Let me know if that helps!

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Choose scanner or scanner officejet Sprout

  Sprout scan KO from win10 update. OfficeJet 6500 has more unusable scanner. Is it possible to choose?

  Hey @SergeB1and welcome to the Forums of HP!

  It seems that you have computer Sprout and want to still use your 6500 a scanner Officjeet. Software for your installed Officejet still? You can choose which method of scanning want it.

  If you experience a problem using the Officejet, I suggest to use printing HP and doctor Scan.

  HP printing and doctor Scan is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

  • Connectivity:

  USB: Check that the USB connection from your computer to the HP product works properly.

  Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.
  • Driver: checks the driver missing or corrupt files.
  • Device Manager: check the problems in Device Manager that could prevent printing.
  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.
  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).
  • Port Match: check the port settings for the HP product.
  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.
  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.
  • Print settings: check and adjust the print quality settings.
  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.
  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source: www.hp.com/go/tools < click here to download and run the print and Scan doctor.

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to find that the key and the box are both in a green circle.

  • If you see only the Green checkmarks, the tool has not found no problem.
  • If you see Green key, the utility identified a problem and fix it automatically.
  • If you see yellow exclamation points, the test failed and requires monitoring of the user, but the step was ignored.
  • If you see a red X, follow the onscreen instructions to fix the problem.

  Thanks, I look forward to hearing back on your part.

• Webcam HP Probook b 6450

  Hello

  I have a HP Probook 6450 b and it incorporates a webcam but when I tried to use it, he said that it was not on and I need to turn it on. How do you turn it on?

  Please help me.

  Kind regards

  Asim Ijaz

  Sorry, it's long back I answered,

  If the entry of imaging devices does not appear in Device Manager, go to the category of the "Bus USB controllers" in Device Manager, expand it, right-click on each entry "USB RootHub" below and click on uninstall. Once all USB roothubs are removed, click the Action tab and click Scan for hardware changes, check to see if the Webcam works, otherwise it may badly.

• HP Officejet Pro 8600 + "there is a problem with the printer or the ink system... »

  I have a HP Officejet Pro 8600 + which is coming up with an error message. This just happened out of the Blue yesterday. The printer is a little older than a year.

  It is said:

  "There is a problem with the printer or ink system. Printhead not missing not detected incorectly installed or incompatible.

  I've deleted and reinstalled ink cartridges, head, unplugged, cleaned up, etc etc.

  HP Officejet Pro 8600 +.

  Product number CM750A
  Sequence number {content removed}
  Not under warranty

  Please notify.

  I'm sorry that you are experiencing this issue. Here is a link that can help you with the ink system.
  http://goo.GL/BXDFf
  
  It seems to be a bad printhead, or it needs manually cleaned with water and lint. If these steps do not resolve the problem, contact HP (1800-474-6836) support.

• My Officejet 4620 do not print black ink

  I replaced the black cartridge on my Officejet 4620 with a new high-capacity HP cartridge and it won't print black ink on the test page, any application or function of Copier.  I have reset the printer nothing helps.  The ink level indicates that it recognizes the new cartridge and says it's full.  Black ink out of the cartridge when I put my finger against the exit hole.  I cleaned and aligned the print heads, but still no go.

  just in case someone else has this problem, heres whats really past and heres how to fix this annoying problem. its relatively easy to do and more efficient than wasting money on a new printer or have that he repaired as most people eventually do.

  going on what? the ink has clogged print heads and solidifies closed. the function of "clean print heads" the printer comes with doesn't have the ability to solve this problem. This feature is to clean the heads Sales, not clogged heads. Why hp decided to make this model without a simple to remove the cradle is beyond me, but fortunately the cradle out and can be cleaned with hot water.

  theres a few items, you will need to get there easily, or you could just burst the branch loppers, like I did and vent your frustrations.

  you will need: a pair of slender beak pliers, a screwdriver torx T9 (selling auto parts stores them for a few dollars), paper towels and a space for work (its easier to do this in a corner of a room, on a small table or floor).  Keep in mind that you are dealing with ink, then change your clothes right just in case and also catch a paper plate or a few sheets of paper to print to set ink cartridges while you work.

  (1) ok. lets start. !!! FIRST UNPLUG THE PRINTER RIGHT NOW, IF YOU DO NOT ACCIDENTALLY DIE BY ELECTROCUTION!  I forgot and when I started unscrewing the first 6 screws, kept chime jump and im like * beep *? I was impressed by the security measures hp took as model engineering.

  (2) the printer is now disconnected and then go to your corner your work surface and place the printer, so there is a wall or a barrier on the left, and also, a wall or a fence behind it. This just in front of her as if you were about to use it.

  (3) now, what you have to do, is to open the printer as you will change the ink and on the right side, there is a plastic guide that prevents opening all the way to the top. Look on the side and you'll notice that he could jump off with fingers. pop off and open it completely open, so you can get to the screws of the cover you would have prevented access to.

  (4) press the scanner part and the upper part against the back wall.

  (5) all the screws you will be remove are the size T9H torx screws. There are ten total. There are 2 black screws in the top of the forehead and then 4 black screws in the top of the back. Remove them and put them on your paper plate.

  (6) following is 1 screw silver short located under the Control Panel, use your finger and feel under the * button. Unscrew, place it on the paper plate.

  (7) depending on whether you want to remove the face/Control Panel to get in the last 3 screws so locate the illustrations on the top of the printer, there are 2 on the lower left and 5 at the bottom right (1 and 2 on the left explain removals of paper jam and 1-5 on the right then explain change in ink cartridges). then about half an inch South of the illustration of the number 5 on the lip, is a plastic stand. six inches to the left is an another then 6 inches to the left, under the number of the illustration 2 (remove the paper jam) is a third support. Unscrew using your nails. Flip it up just like the hood of the car, and eten on the main top of the printer, keep the flat wire which is connected to the frame of the control panel (if the flat wire jumped because you got too loud, then simply insert it in when you go back).

  (8) then unscrew the 3 long silver screws that are located under the Panel you just popped off the coast. There is 1 on the left and 2 on the side rightish. mix 'em on the paper plate.

  (9) now that all the screws are removed, take the Panel front and partially pop it back together.

  (10) then take all over (the part with the small illustrations and lift like a hood of car, ONLY THIS TIME OPEN IT LEFT and he balanced on the edge of the printer, to lean over towards the wall or an obstacle on your left.) MAKE SURE NOT TO PULL ON THE STRIP OF COLORFUL SON FRUITS LEFT AND ALSO THE FLAT BLACK WIRE CONNECTING PART SCANNING FOR THE MAIN OF THE PRINTER PART.

  (11) then take the pliers to tapered spout and remove the 2 silver tension springs located behind the printer cartridges. Pay attention to where they were attached so you remember where they go during the Assembly. take a picture with your phone if you have to, or simply re - understand it like I did. mix 'em on the paper plate.

  (12) then disconnect the 2 large flat wire and 1 small flatwire attached to the back of the ink cart. take a picture or can remember like I did. I guess bad things can happen if you reverse the on re-Assembly. Pick up the phone and take a picture of quik to be sure.

  (13) now remove the cart ink, cartridges and all, by lifting the front first.  Be careful of the transparent tape little there that moves the carriage from left to right and vice versa. you don't want to damage this little guy. now take the transport to your paper plate. not some ink or accidentally get it on your fingers without knowing or will make a mess.

  (14) remove the ink cartridges and put them on the paper plate, side ink to avoid a mess, these things sometimes drip. put the plate side. its time to clean the print heads.

  (15) then go to the sink, to the distribution of empty ink and turn on the hot water and then let the transport of empty ink sitting there with the water mainly through the clogged color screen (inspect and make you is not a small rubber seal surrounding the small screen, if there is do not waste it. I didn't look too closely and I don't think that hp has them but I have a few other printers). It will stain the sink but water ink he comes out to be sure. notice there is also a small circuit attached to it. don't bang it upward but getting wet does not matter.

  (16) continue to do this until the water is clear.

  (17) then use your finger and rub the screen gently with your finger and then rinse it, taking ink until the water is clear. This continues until there is no more ink and screens are clean. do it for all the colors just for good measures. the color of problem that would not print, you'll notice takes longer to clean than the other colors.

  (18) now look on the lower side of the transport. these strange looking things are the leaders. Rinse in hot water and dry them with paper towels. then flip it over and the breath on the side of the screen again. also between the screenside and heads (on the side of the transport) is an opening which is also probably gunked up. It blows with water too. Then, turn it over and wipe the head again. Repeat this step until no fades or until you are sick and tired.

  (19) shake, then use paper towels to dry the entire unit. Make sure that the device is dry.  especially inside the female plugs. blow inside or out dry hair and dry gently. do not stand there and melt the but with the blow dryer. but the sooner it dries less your ink cartridges, sitting on the paper plate will dry out. the custom of the ink dry quickly just do not take a NAP or go on a date until you're back with part of the ink.

  (20) now you have finished cleaning the heads and probably don't need to do it again for the length of time, it was because you bought the printer. and just as a roadtrip you used a map to navigate, you will use these instructions in reverse for reassembly. but keep in mind when re - insert the 3 flatwires that you disconnected from the back of the ink cart, make sure you that have small metal contact on the flatwires points (side male) inserted so they affect small metal contact points on the caps of transport (feminine) side. ALSO BE VERY CAREFUL NOT TO DAMAGE BLACK FLATWIRE CONNECTING THE SCANNER PART PART HAND PRINTER. THERE IS A SMALL GROOVE IN THE PLASTIC WHERE IT CAN SIT TO GUARANTEE NO CRIMPAGE. USE IT. also make sure that the 2 hinges to the scanner portion/cover are placed correctly before the fixing of the top with the 6 black screws.

  now raise the printer and reinstall the ink cartridges. then plug in the appliance and turn it on.  If you get notifications on the control panel telling the custom of transport move, then open the trunk and remove the ink cartridges, hustles and ensure that transport is installed and that the tensioner springs are in place correctly. Repeat the operation if necessary until notifications go away or just do a test print and do not take into account the notification if you messed with it a few times already. That's what happened to me and the notification went his own. Once its online, open the hp utility and press the button "clean the heads. do 2 x in a row and you will be in style, with colors extremely rich and "BOLD" and Yes, printed black raven.

  p. s.

  You can always take your aggression out with tree limb loppers or Tin shears like I did and cut the plastic Center keeps you to transport directly outside. Completely eliminates the disassembly and reassembly. Make sure you DO NOT CUT THE TRANSPARENT TAPE THAT MOVES BACK AND FORTH TRANSPORT. This way the next time it happens it takes you only 10 minutes before you are upward and printing.

  Enjoy!  -Porf

• Cannot find Scanner Actions tab HP OfficeJet 8600 more software selection

  I recently bought the HP OfficeJet 8600.  I am running Windows 7.  I try to add folder selections to the printer for analysis at the folder option, and I want to configure the scan to E-mail option.  I was able to add a folder, but now I can't find the stock selection to scan in the menu when I run the printing software.  I don't see the following selections.

  HP printer Assistant (do nothing when you press on)

  Setting preferences

  See what's printing

  Customize your printer

  I saw the selection of Actions of Scanner option once when I launched the software, but now I see that the above four choices.

  Any suggestions?

  Hello

  Uninstall the software in the Start Menu folder.

  Then download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3 & CC = US & DLC = in & LC = on & os = 4062 & Product = 4323648 & sw_lang =

  Now you should see all of the features in the new software.

  Shlomi