OfficeJet HP 6968: officejet hp 6968, turn off the ringer

Similar Questions

• OfficeJet L7780 how can I turn off the ringer?

  I want to turn off the ringer (phone ringing sound) on my OfficeJet L7780. I tried to work in the printer menus. I searched everywhere, including the manual and have not found an answer. Please help if you can.

  I only use the OfficeJet for outgoing faxes, I just need to hear the dial or connect tones, so if I turn those off to turn off the ringer, it's okay. Thanks in advance for your help, Ed

  Hi EdBublanski,

  Look on page 88 of the user guide.  Click here  Does that help?

• turn off the ringer on the envy 7640

  I'm a new 7640 attached to a 2013 end Yosemite running iMac. My wife works from home and I would not have the ringtone on the sound off printer when a call comes in. Is it possible to turn off the ringer, as you can do on a phone?

  Hi @Neilkn,

  Welcome to the Forums of HP Support! I read your post and see that you want to turn off the ringer on the printer. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I've provided the steps to disable the volume of faxes. Hope that helps.

  • On the printer, go to Fax settings.
  • Select the Fax Volume.
  • Select disabled.

  If there is anything else I can help you, let me know. Thank you.

• How to turn off the ringer on HP Officejet J4550?

  I recently bought a HP Officejet J4550 all-in-one. I send faxes from time to time, but almost never receive them. I jump out of my chair, whenever the phone rings when I'm sitting at my desk because of the tone coming out of the HP. Is it possible to turn it off or set it to mute?

  Thanks in advance,

  Jesse

  Press the Setup button (top right of the front) to access the configuration Menu.

  Menu Setup > basic setup > the Speaker Volume > Off, then press the OK button.

• How do I turn off the ringer on the phone in L7580

  I need advice on how to disable any ringtone on my L7580.  Appreciate any help.  See you soon!

  Press Setup > set up the basic fax > Fax Volume > power off.

  Press the Setup button > preferences > sound effects Volume > power off.

• turn off the ringer only on hp 640 fax

  How can I disable only the ringer and not all the sounds on the HP 640 FAX?

  Hi rmkram,

  I understand that you do not want to disable only the ringer on the fax. I'll try my best to help you with this.

  In the series HP 640 Fax User Guide on page 22, he explains how to adjust the volume.

  Adjust the volume
  You can set the volume level for the ringing and the speaker.
  Ring volume
  .. When the fax is in ready mode to adjust the volume of the ringer, press on...
  Whenever you press the button, it will increase or decrease the volume.
  NOTE: The volume of 0 indicates that the machine does not ring when a call is received.

  I hope that this information help, please let me know how it goes.

  Thank you

• "HP OFficejet Pro L7680 turns off and won't turn back on"

  HP OFficejet Pro L7680 turns off and won't turn back on.

  Hello untech,.

  I see it's been a while since you have posted with us on the HP Forums.  Please, let me take a moment to say "Welcome Back".

  I see that you have a problem with the printer l ' auto turn off and not turning it back on.

  You happen to have the printer power cable connected to a power strip/bar?  If so, please try to connect the printers power cable directly to a wall outlet.  Here is a document that explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  The printer in the document is a LaserJet printer but this document is intended for HP products in general and only use the LaserJet printers for example.

  I'll also include a document indicating when the HP printer will not be running or to respond when the power button is pressed.

  If by chance the problem is not resolved after you complete the steps described, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Please do not hesitate to write me again if you have any other questions.

  I wish you a great Monday!

  See you soon,.

• Cannot turn off the issue of jam and paper cartridge (both at the same time)

  I have a HP Officejet 8600, running on a wireless home network.  The printer will not work.  We get two messages. 1. Introduction to jam, and I'm going through all the steps to clear paper, including the search for pieces of paper, as well as any leaves.  I found no paper, whole or in part anywhere in the printer.  2. at this point, I get a message that I have a problem with a printer (of ink, installed correctly, etc.) cartridge.  Simply replace us all cartridges, so I know that we are not out of ink.  However, when I opened the door to the area of printer cartridge, the cartridge does not move where I can check it out.  There's just right.  So I'm "stuck".  I don't know how to get the cartridge door to roll over so I can check!  I turned off the computer several times and tried to reset things, but nothing seems to work.  Any suggestions?

  Followed - I turned off the printer.  Then opened the cartridge and reaches into the printer access door.  Without moving the cartridge door, I pressed each cartridge to make sure it was placed correctly.  Then, shut the door and back running the printer.  The printer seems to start correctly.  I then opened the door, the door-cartridge moved where I could access them normally.  I double checked that each cartridge is installed and closed the door.

  At this point, everything seems to work properly.

• All lights on screen Flash - Message - Please turn off the printer and turn it back on

  I'm fighting a problem for a few weeks now with all the lights on the display starts flashing and the message please turn off the printer and turn it back on.   HP sent me a new printer that does the same thing.  The printer is an Officejet Pro 8600.  My computer is Windows 7.  I use a Belkin 750 db wireless router.  I talked to the service the customer several times with no results.  Did a hard reset of the printer, change the SSID of the router, because I think that one of my neighbors has the same router.  The thing most effective I did was change the channel to 6 which will operate for several hours until the display starts to Flash again.  Channels 1 & 11 starts blinking after a few minutes.  I know there are other people who have had the same problem.  I'm about to throw the thing in the trash.  My last printer brand X was set up the same way with no problems.  On the network, there are 2 iPads, smart TV, and an iPhone.  Need help please!

  Super Dave

  Ethernet cable and connection with correction of the problem.  Its been 2 days and the printer worked perfectly.  Please pass this solution on your technical telephone support staff because I know that there are others with the same question.  Thanks for your help.

• Try to update iPad OS10 and froze on "check update" and now unable to turn off the iPad.

  Tried to update iPad OS10 and "check update" has been spinning for over an hour 1/2 and impossible to each slide to open or to turn off the iPad.

  Hello

  If you are sure its impasse press and hold the power button / stop and menu button

  Hold both down until you see the apple logo

  It may take 30 seconds.

  You have enough space on ipad for download, you need about 4 g?

  See you soon

  Brian

• Turn off the power limit Ad Tracking?

  Hello! I have a problem with the feature "search ad limit. The cursor is gray and will not let me turn off, saying that I have less than 18 years when I'm not. I've already changed to 'allow changes' restrictions and I don't know if I have apps which force advertising, tracking, and I don't know how to fix this, if this is the case. Help, please! I need this setting off to access certain applications of mine! I am also on a personal Apple ID.

  Turn off wifi and cellular data, then click on the button of advertising in privacy and turn off the announcement of limit button

• Can you turn off the shutter sound on the factory unlocked iPhone to the Japan 7?

  Can you turn off the shutter sound on the factory unlocked iPhone to the Japan 7?

  I am going to Japan November 2016 and plan to buy unlocked (no sim) iphone to use in my country (Thailand) 7.

  However, I have read some post on 'mode of politeness' in Japanese phone but the conclusion is not clear whether you can disable shutter sound (without sim) unlocked iphone 7 or not. Then, someone could share on the current situation?

  Thank you

  No, its required by Japanese law shutter. Even if the iPhone is

  is no longer in Japan, you will not be able to turn off the shutter sound.

  You should also check with the seller to be sure you can get the

  iPhone unlocked from the Japanese wireless provider to use with your

  carrier in Thailand. And check that the iPhone is unlocked before leaving the

  retailer.

• My MacBook Pro with El Capitan 10.6.11 close the menu drop down. I have to turn off the power

  The closing down and options no longer work in El Capitan 10.6.11 restart on my MacBook Pro mid-2012. I have to press the power button to turn off.  When shutting down or restarting are selected, the Ribbon at the top of the screen disappears and Finder is no longer available but other aps on the bench of the accused are still available. When I restart after turning off the power, the system is back to normal until I need to close again.

  Hello

  Just in case, run disk utility.

  Open utility disk located in Applications/Utilities

  Then select the disk to boot on the left and then select the first aid tab and then click run.

  If disk utility indicates that the disc seems to be OK, you are finished. Otherwise, you must repair the disk.

• Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running.

  Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running. I can't enter to give more details. Can anyone help? There are a load of work due to deliver to the printing press Monday

  Have you tried to boot from the Partition Recovery and repair then the disc from there, using disk utility?

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.