HP Officejet 6700 printer all in one

Similar Questions

• HP officejet 6978 all in a single p: hp officejet 6978 printer all in one, appearing to create its own wifi signal

  After I had my printer connected and working properly, I looked in my wireless options to connect to the internet. I have hooked the fine, but in these choices, was a connection option in/with? a hp officejet 6978 printer all-in-one. Before you buy and hanging upwards, connect this option was not there. Now, this is the case and showing a stronger than my router signal. This printer is able to be a wifi connection? Any ideas?

  That's great. I see nothing in the instructions, and the seller does not mention either. It seems to me that this feature would be another selling point. I do not necessarily want to disable it. I like the idea of having him as a backup, if my current one falls down, would only be an option? If so, I tried to connect using pw of my router, but cannot connect. This would have a default PW? is so, how do I find it. So thanks for your help. As I said nothing even alluded to this function...

• Install HP Officejet 6310, printer all in one

  I loaded and began to run the instalation of the complete software for the HP Officejet 6310 printer all-in-one on my new Dell Inspiron N7110 Notebooks. It runs Windows 7-64 bit. After the end of the excerpt, it stops just running. It should go in the installation process, but it doesn't. Can someone help me?

  See if you can find the folder of extraction of HP that he created, then run the installer in there.

• All-in-one HP Officejet J4680: compatible MICR of ink/HP Officejet J4680 printer all in one

  I HAVE A HP OFFICEJET J4680 PRINTER ALL-IN-ONE. I NEED TO BUY A MAGNETIC INK TO RUN PAYROLL AND ACCEPTS PERSONAL CHECKS.

  1. THIS PRINTER ALLOWS THE MAGNETIC INK?

  2. IF NOT IS THERE A COMPATIBLE AVAILABLE FOR THIS MODEL AND THIS MODEL MICR INK ACTUALLY SUPPORTS COMPATIBLE INK?

  3. WHERE DO YOU BUY COMPATIBLE INK / MAGNETIC INK AND MAGNETIC PRINTERS?

  I CALLED THE LOCAL OFFICE SUPPLY STORES AND THEY DON'T SEEM TO BE FAMILIAR WITH EITHER.

  Thank you

  Hi @nola398 and welcome to the Forums of HP!

  I see that you are looking in magnetic ink.

  Magnetic ink is not something HP offer, so I can't really talk about its compatibility.  You can, however, give us a call and see what additional information are available.  You can use this website to find out how to contact us in an appropriate way, based on your region:

  Contact HP worldwide

  Thanks for posting on the HP Forums!

• can a laptop running windows 8 work with a hp officejet 6210 printer all in one

  can do a [hp 15 laptop Clubhouse] laptop running windows 8, work with a HP officejet 6210 printer all-in-one?

  The Windows 8 shows it as being compatible hardware compatibility site.

  The drivers are located here.

  

• Officejet 5610: Printer all-in-one Officejet 5610 laptop

  Until yesterday, I had the printer all-in-one HP Officejet 5610 installed on my PC (Windows 7). Now he's disappeared! When I try to install a new driver, it seems to download and install, but I'm not and it does not appear in devices and printers.

  Hi @Casona,

  Welcome to the Forums of HP Support! I see by your post that the printer does not appear the window devices and printers, even after reinstalling the software. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I would say to restore your computer to an earlier time when everything worked correctly, System Restore for Windows 7

  Please let me know the results and if there is anything else I can help you. Thank you.

• HP Officejet 6700: HP Officejet 6700 Premium all in one network problems

  Printer = printer HP e-all-in-one Officejet 6700 Premium
  Model = H711n
  Number of product = CN538A
  Firmware version = MPM5CN1450AR
  Location = Ireland
  Printed pages total: 152
  Scanned pages: 58

  Other details available on request...

  I've had this printer for several months now, I have had no problem connecting to my wireless network and connect computers, telephones and other equipment to this.

  A few days earlier, when starting the printer display flashes with the useless error message, error in the printer, turn the printer off and back on.

  I have power cycled as requested and received the same message, over the power of the cycle he mentions turning off the power button and no DISCONNECT of the sector. Until then I had never disconnected from the sector. After that I have several attempts to power cycle the printer is off and removed the sector, has waited half an hour and powered on again once.

  Still stuck in a loop. He also briefly flashed a blue screen with the error B81431CB. So brief that it is almost useless. I had the boot sequence video and pause playback to read error!

  After some research, I decided that she was experiencing problems connecting to the WIFI network. So, I turned the wifi on the router and the printer network started as usual. Internal menus are now available and I can print status and so forth, so at this point I can exclude defects of ink or mechanism.

  I went in on the printer network settings and reset the network. I'll also through the printer to factory default settings. I have reactivated the WIFI network to the router then went to install the printer again. Digitized for wifi networks and found mine. Entered the password for wifi and the printer could not connect. Everything is good, correct ssid, signal. Report shows wifi password is incorrect.

  I have try several times to connect wifi password is certainly correct, but the printer refuses to recognize the correct password. I tried a different router, the same result. Says incorrect password. Also I tried WPS and a PIN, said still fails to connect.

  At this point, I have disabled all security on the wifi network. Bingo, printer connects to the network, but starts with the loop of error mentioned at the start of the tour and turn it back on. This above has been tried several times, the factory reset, everything ok, turn off the wifi security, the printer connects and goes in a loop.

  So, at this point wifi is confirmed to be defective. I decide to directly connect a LAN cable. Once the LAN cable is connected, a few seconds later the printer detects the network and goes back into its loop error. It will not just connect to a network via wifi or LAN. He previously worked on the network, and nothing has changed on the network, not new parameters or no new devices.

  I connected a laptop to the printer via USB and that seems to work ok, but a USB connection is not ideal and defeated the convenience of a wireless printer. I also tried to reflash the printer in case there is a corruption of the firmware, but the utility detects that the latest firmware is installed and that it is not engaged.

  Now...?

  OK I managed to make it work and I will try to explain the steps of my best.

  As mentioned previously, I tried another router, I tried the wiring, and I tried to reset the router and the printer. Nothing seemed to work.

  Out of curiosity I just put my phone in a WIFI AP. Tried connecting the printer and it worked. The printer connected to the WIFI phones.

  So I know that the printer works on at least one access point.

  Thus, in the settings of the router and firewall. The only thing enabled in the firewall have been

  IPv4 firewall protection

• printers HP officejet j4550: hp officejet j4550 printer all in one

  I have upgraded to windows 10 on my laptop. I have an hp officejet j4550 all-in-one printer. I used the boot disk and received a message that my system does not meet the requirements. This printer works on windows 10? What should I do?

  You need to upgrade the Windows 10 printer also.  Go here.

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-J4000-all-in-one-printer-series/3645081/model/3645096

• OFFICEJET 7210: I need drivers for my Officejet 7210, printer all-in-one.

  Hello everyone, maybe someone uses drivers for an Officejet 7210 all-in-one printer?, this printer is deleted and no longer supported by HP, I bought a new laptop and now I need to install drivers...

  Thanks for your hellp...

  Daniel

  On the assumption that the OfficeJet 7210 is a member of the printers OfficeJet 7200 series (I don't know for sure - I don't have much knowledge of ink jet printers):

  My Professional 10 64-bit Windows system has a driver for the OffiiceJet 7200 series printers:

  

  You may need to click the Windows Update button in the Add Printer dialog, then wait (possibly several minutes) while additional drivers are downloaded, until the list is filled again.

  Of course, I have no idea if this driver is not working properly, or if it will offer all the features that you can.

• I have an Officejet 4500 printer all-in-one. I have problems with incoming faxes.

  I have an officejet 4500 all-in-one printer.  I have problems with incoming faxes.  It starts to connect, but then prints a sheet indicating image Fax Send report is set to off.  How can I enable this so that I can receive faxes.  Thank you.

  The "image on fax send report is set to off" is just for the image on the fax. This is will you won't fax. Check the connections.

  You should have the telephone line from 1 LINE of fax directly to the WALL SOCKET.
  You should have the phone plugged into the LINE 2 of the fax machine.

  Access your fax on the printer settings.
  Go to the ADVANCED SETTINGS.
  Enable error CORRECTION MODE (ECM) - OFF
  You turn Fax speed to-SLOW

  After that, run your FAX TEST and see the results.

• HP Officejet 6700 premium all-in-one. The documents will not power automatic document feeder fax.

  I can send a fax from the glass, but when I try to fax multiple pages in auto document feeder it doesn't recognize, they are there and asks me if I want to fax the glass or ADF.  I click on ADF and says original place in the ADF, and press start.  I opened the compartment in front of the ADF and it is not stuck or dirty.  Help, please.

  Hi DLreportin,

  Thanks for the reply!

  In the software you wish to select Connect new printer. Not really sure why you were running the software again if I don't believe it was part of one of my suggestions.

  If I understand well after the steps of my above after you are still unable to make a copy through the ADF?

  Did you update the firmware, or connect the printer to the wall makes no difference?

  Please let me know it's going, and if you are still unable to copy after checking these two things and then I will consider a deeper reset for you.

• HP officejet 4620: hp officejet 4620 printer all in one

  series #CN33S210C8

  After 2 pages print, my printer stopped printing.  Then I changed my cartridge, when I tried to print again, I got blank pages.  Just installed a black cartridge genuine HP.  I cleaned the print head 2 x and still get blank pages.  Can someone help me with this problem.  Printer was purchased 7/2013 and I think I'm out of warranty.

  My printer has stopped printing - I don't get white pages.  I cleaned printer heads 3 x and aligned, but nothing works.  What do you think that the problem can be.  The printer goes through all the motions, but does not print.

• My HP Officejet 4500 printer all-in-one will not print web pages

  My new printer will not print anything when I try to print selections as a route on a web page of travel.
  Other features of the printer works k o such as print emails.
  I have Windows 7 Professional 64 bit system.

  "My new printer. »

  For a newly installed printer, you may need to reset some hidden preferences, print.print_printer, in particular, for Firefox to recognize the new printer.

  • See-> http://kb.mozillazine.org/Problems_printing_web_pages (see "Reset printer")
  • See-> http://kb.mozillazine.org/About:config

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plug-in for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• HP Officejet Pro e-all-in-8610: officejet 8610, printer all in one

  I installed window 10 and my wireless printer will not work.  Do I need to download a driver or something?  Thank you

  Hi @sheilabroderick,

  Thanks or your comments.

  Did you connect your printer to the network?  We assume that it has connected since you have another PC with the printer.

  If your printer is not connected, this resource will show you how:

  Connect the printer using the Wireless Setup Wizard

  For questions offline, you can try this:
  
  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
  
  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926 & h_lang = on & h_client = s-h-E016-1 & h_keyword = DG - PDU
  
  Hope that helps.

• HP Officejet all in a single 4635: increase fontsize 4635 Officejet HP printer all in one

  Increase the fot HP 4635 size printer

  The font size is controlled by your printing software.   You change the font size you ask you want including your browser.