HP Officejet all in a single 4635: increase fontsize 4635 Officejet HP printer all in one

Similar Questions

• HP Officejet 4635 e-all-in-one printer prints multi-page document

  Hello, I have a HP Officejet 4635 e-all-in-one printer and can't print a multiple page document. The printer will print all except the two or three first pages, stopping in the middle of the last page it is printing, and then ejected from the page, usually with the third print top. At this point, I get an error message on my computer screen that says: "cannot print from xxxxdocument. I can go back into the print menu and select the pages that are not print and manually fill the work, but which requires sometimes two or three attempts, that the printer stops again impression after two or three pages.

  My operating system is Windows 8, the printer is connected to my wireless router which is on the same floor, the printer is connected directly to the wall outlet. I met this problem until print 28.0 Firefox, Microsoft Word, and Microsoft Excel. The documents included diagrams, sheets of computing, graphics and text. Oddly enough, I think I'm able to print several pages (of least until 4 on my last attempt) of Microsoft Office Picture Manager.

  I have no page unique impression of difficulties from the browser or any installed program and am able to print from my devices android as well, although I still have to try multiple pages printing app. The problem seems to occur more often if I try to print more than two pages.

  I searched on the Web site, looked through the installation of printer troubleshooting, including the instructions under "step 3: If your printer is connected to your wireless router, but you can't print (or scan). Nothing I've tried has helped him.

  I wish I had a solution to this problem.

  Thank you very much.

  Helen Marie Kennedy

  Have you tried full install driver software?  OJ4630_188.exe

  Exit the: 08-04-2014

• All-in-one HP Officejet 4635: my HP Officejet 4635 all-in-one printer does not print since upgrading to Mac 10.10.1.

  All-in-one HP Officejet 4635 does not print since upgrading to Mac 10.10.1. Any suggestions? Thank you!!!

  Hi brenHP4630,

  You might want to try updating the driver for your specific operating system. You can find the download HERE.

• HP OfficeJet All In One 4635: HP officejet 4635 does not print

  Bought a new HP Officejet 4635 all-in-one today.  Installation is complete, do not print anything.  Run wireless on Windows 8.1.  The Test results wireless network print, says no problem found.  Unable to print from the internet, word or excel (from Office 365).  Already reinstalled printer twice.  I don't get an error message, the work appears in the queue but then disappears without printing anything.  I don't have Norton or MacAfee.  Help! I already spent all day fighting with it.

  HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning.

  Download and run printing HP and doctor Scan quickly and automatically perform several tasks of troubleshooting.

  When you click this link, HP Print and Scan Doctor is downloaded using the download of your Internet browser capabilities.

• HP officejet 6978 all in a single p: hp officejet 6978 printer all in one, appearing to create its own wifi signal

  After I had my printer connected and working properly, I looked in my wireless options to connect to the internet. I have hooked the fine, but in these choices, was a connection option in/with? a hp officejet 6978 printer all-in-one. Before you buy and hanging upwards, connect this option was not there. Now, this is the case and showing a stronger than my router signal. This printer is able to be a wifi connection? Any ideas?

  That's great. I see nothing in the instructions, and the seller does not mention either. It seems to me that this feature would be another selling point. I do not necessarily want to disable it. I like the idea of having him as a backup, if my current one falls down, would only be an option? If so, I tried to connect using pw of my router, but cannot connect. This would have a default PW? is so, how do I find it. So thanks for your help. As I said nothing even alluded to this function...

• E-all-in-one printer, HP Officejet 4635: is MORE printed desktop ONLY - HP Officejet 4635 e-all-in-one

  I've been living with this problem for a few months and now wants to solve with your help.

  Question:
  Printer wireless HP OfficeJet 4630 print is no longer with my desktop Dell D531 via WLAN, however, work
  with all the other WLAN connected devices, e.g. mobile phones, netbook, computer laptop and tablets.  I use FETD fine printer years and this issue just started a few months ago. To print, I have sent files to other devices and printed with same print files.

  What I did to solve the problem without success:

  (1) verified using two other forums which suggests the point 2 below;

  (2) Ran HP Print and doctor better analysis tool (latest version) that says software problem so I uninstalled the old software, rebooted each time, downloaded/installed new software each time and installed the new printer wireless which will not yet be printed of Dell D531 destop ONLY. Note: tool can print a diagnostic page 'Internal' but not test page;

  (3) range of HP printers reconnected to the couple times WLAN;
  (4) for desktop computer and printer properties show the same internet address;
  (4) tried to use tools of diagnosis or bad MS Fixit printer without success (does not matter);
  (5) have tried to use the dropdown to printer option troubleshooting without success;

  (6) read by this and other forums without help so far. and

  (7) the print spooler is empty and I cleaned 813 Printservice EventID 372 newspapers.

  System:
  Name of the operating system Microsoft Windows 7 Home Premium Service Pack 1 Build 7601 6.1.7601
  RAM 4 GB
  BIOS Version/Date Dell Inc. 1.0.13, 09/02/2009 (last)
  Name of NVIDIA GeForce 210 graphics card

  All reasonable advice are appreciated.

  Hello @bob3677,

  Thank you for the update.

  So should I understand that you assign an IP address manually and also assigned a TCP/IP port? Let me know.

  If fact, I would say that provide you for your printer administration permissions.

  • Press the 'Windows key' + 'r' for 'run' - Type 'coil' and press ok.
  • Right click on 'PRINTERS' - select 'properties '.
  • Select the security"" tab. You will find a few entries like the 'Administrators' and 'users', click on 'Edit' and give "Full permission" at all entrances. Save / apply settings.
  • Go to "Devices and printers", right-click on the printer you have installed and select "printer properties".
  • Select the security"" tab. You will find a few entries like the 'Administrators' and 'users', click on 'Edit' and give "Full permission" at all entrances. Save / apply settings.
  • Restart your computer and try again to print.

  Please let me know if that solves the problem, or if you need assistance.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• HP Officejet 5510 all-in-one: scan multiple pages into 1 file/scanjob with my HP Officejet 5510 all-in-one

  Is it possible to scan a page one / several pages in a single file scanjob/one on the flat of my HP Officejet 5510 printer all-in-one?

  I did do some additional research on the internet and found the HP scan and capture the app. Although my HP Officejet 5510 all-in-one did not appear in the list of devices, I installed the app, and it has provided a solution for my problem: scanning multiple pages in a job file. Banhien suggested to click on the + sign, but the drivers, I had do not have one, but the HP scan and capture app has this feature. It's so nice. My problem is solved.

• HP Officejet 4630 e-all-in-one: how to send a fax 2 sides with HP Officejet 4630 e-all-in-one series?

  There is no documentation on how to send a fax with HP Officejet 4630 e-all-in-one-sided.

  I have 20 pages with a print on both sides. How do fax you these pages so that they receive the same pages with print on both pages? I load the documents with top paper feeder. The scanner allows you to load pages ask two face contrast to send the fax?

  Thank you, Kevin

  You're welcome cybercook.

  If you need keep the same order, put a single page at a time, recharge it with the other side facing upward and click Start a new search.

  You can also place all the stocks and click Scan Page, once recharge on the other side and click again on the analysis Page.

  Once the page was scanned send the fax.

  Shlomi

• HP Officejet 5740 e-all-in-one: Google voice number and Fax

  I was wondering can I use my number of Google voice for the option fax on my HP Officejet 5740 e-all-in-one series... instead of a line fixed?

  Hello

  No, you can increase your voice of

  https://support.Google.com/voice/answer/115124?hl=en

  Kind regards.

• ANALYSIS QUESTION - OFFICEJET PRO 8600 - ALL-IN-ONE

  I HAVE A HP OFFICEJET PRO 8600 PREMIUM E ALL IN ONE-N911N PRINTER.  I have
  HAS RECENTLY HAD SOME PROBLEMS WITH THE SOFTWARE/DRIVERS DESKTOP, WHERE THE
  SOFTWARE DOES NOT OPEN ON MY DESTOP.  I CONTACTED HP TECHNICAL SUPPORT. THEY
  TOOK CONTROL OF MY DESKTOP AND MY SOFTWARE HAS DETERMINED COULD HAVE BECOME
  CORUPTED AND SO DOWNLOADED FROM THE HP WEB SITE LATER
  THE OFFICEJET 8600/DRIVERS SOFTWARE VERSION, AND THAT SEEMED TO
  SOLVE MY PROBLEMS, UNTIL I DISCOVERED WHAT I BELIEVE, IT IS A BUG OR HAS
  SERVICE CAPACITY FORGOTTEN WHEN SCANNING BY USING THE MOST RECENT SCANNING
  SOFTWARE.   THE QUESTION IS, WHEN YOU USE THE 8600 DESKTOP SOFTWARE TO ANALYZE
  A DOCUMENT: IF I SCAN A FEW PAGES USING THE DOCUMENT FEEDER, THEN,.
  BEFORE I SAVE THE FILE, I WOULD LIKE TO ADD ANOTHER PAGE SCANNED, TO THIS
  SAME FILE, BUT YOU WANT TO ADD THIS EXTRA PAGE USING THE FLAT GLASS
  (NOT THE DOCUMENT FEEDER), THE SOFTWARE NOT ME LETS NOT DO THAT. THE
  SCANNING SOFTWARE IS ALWAYS LOOKING FOR THE PAGE EXTRA (S) TO BE
  ADDED, COMING THROUGH THE DOCUMENT FEEDER (SOFTWARE ONLY)
  RECOGNIZE ADDITIONAL PAGES TO COME FROM ANOTHER SOURCE, OTHER THAN
  FROM THE SAME SOURCE YOU STARTED SCANNING WITH). I'VE ALWAYS BEEN ABLE TO
  DO THIS WITH MY OLDER VERSION OF THE DESKTOP SOFTWARE (CD VERSION ONLY)
  CAME WITH MY PRODUCT), BUT SINCE I DOWNLOADED THE LATEST VERSION, IT
  DON'T ME LETS NOT START SCANNING OF A DOCUMENT FROM A SINGLE SOURCE (DOCUMENT
  FEEDER OR FLAT) AND ADD EXTRA FROM ANOTHER SOURCE () PAGES
  CHARGER DOCUMENTS OR FLAT).  IS THERE A BUG IN THE SOFTWARE?  TO
  SUMMARIZE THE PROBLEM: WHEN YOU START A SCAN USING THE DOCUMENT FEEDER.
  WANT TO ADD ANOTHER PAGE SCANNED ON THE GLASS FLAT, THEN
  SAVE ALL PAGES SCANNED IN A FILE?  YOU CAN'T DO THAT WITH THE MOST RECENT
  SOFTWARE (DOWNLOADED FROM HP WEBSITE), BUT YOU CAN THE MAKE WITH THE
  CD VERSION OVER OLD ONES. IS THIS FEATURE MISSING FROM MOST RECENT SOFTWARE?

  OK, the new SW to use can be found here:

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Download and install this.  This will install an application on your system, called "HP Scan" extended.   This software is designed to work with any recent HP scanner that has already installed the drivers.    The software does not replace your existing HP Scan supplied with the appliance.  It is rather an alternative which offers many more features than what came with your device originally.    This software is already available with the new HP machines.

  The selection of the default source is 'Use document feeder so burdened', so you should be able to scan from the ADF or flat all in one session.

  Enjoy!

• Pages come out White HP Officejet 6500 has e-all-in-one printer.

  I have a HP Officejet 6500 a e-all-in-one printer (product # CN555A), and I had problems printing for a while.   I'm working on Windows 8, although the same problem occurs with a Windows 7 laptop that I use sometimes.
  Printer goes through all the movement of printing and pages come out sometimes very thirsty or Virgin (illegible). At the beginning, once in a while it would happen, and once the printer is rested for a few days, it works again. Now it happens all the time and I can't print.  I did ALL the steps of troubleshooting hp and nothing works.   A few days ago, I managed to have it print a little darker, but it mainly printed in gray-greenish, but after the second page, he just disappeared again to nothing.  I think it may be something on the channels contained in the cartridges of ink to the page or something like that.  Can someone help me understand this and the difficulty of my printer?

  Thank you
  )

  Considering that the yellow is almost full and is printing very well, there is actually a small chance that the low level of ink you see (approx. 25%) this is dried up in the cartridge itself.  Think of the ink as a former condiment that has been in your refrigerator for a long time.  When there are more things in the container, it is less likely to dry up, but when you have only a little inside, the air-to-ink ratio increases the chances of this being actually what caused this.

  Although it is cheaper to do the printhead of soaking, it's also much more risky than buying the new ink first.  I highly recommend making sure that you have replaced the low ink cartridges before trying the latest possible stage.

  Certainly, it is probably due to cleanups of printhead, print tests and other basic troubleshooting steps that caused you to be low on ink in the first place.  Maybe double check on the return policy of the store about the ink you buy maybe not a bad idea, either in case you do not buy, does not print, you are soaking the print head and then it also fails.

  Better to be prepared for the worst but hoped that the simplest solution is the best one (Occam's razor) is what I mean by all this.  Keep me posted on what you decide to do.  * fingers crossed *.

• How can I scan multiple pages to a PDF on HP Officejet J4680 all-in-one?

  I have a printer HP officejet J4680 all-in-one was given to our non-profit organization.  How can I use this to scan multiple pages to a PDF file and send it to?

  Hello

  Form of the document refer to the article on the digitization of several single-file pages.

  http://support.HP.com/us-en/document/c03476857

• need to find software to download HP Officejet 6500 more e-All-in-One-E710n-z a

  HP does not print. called apple support and deleted driver. now I'm unable to find the driver to download on iMac there.

  HP Officejet 6500 more e-All-in-One-E710n-z a

  Help, please

  Thanks marianne

  You need to access the support Web site HP and search for a driver for your printer, then download it from here.

• I have a HP Officejet 7300xi all-in-One printer scanner fax

  The Hp Solution Center does not open. When I double click to open it a message indicating "no HP devices have been detected. HP Solution Center will close now. I tried to uninstall the program and then reinstall it with no luck. Nobody has solved this problem?

  Thank you for your concern. I contacted HP through a chat session and received the information below to try to remove and reinstall. Well so far it seems to work. If someone else is having a similar problem, they should at least try this method.

  Here are the steps to manually uninstall.

  (1) unplug the printer from the computer or network.

  2) click on the Windows button on the computer.
  
  (3) type folder in the box and press ENTER to open it.
  
  (4) locate and click 7zs2b7.tmp file to open it, if not, check for any file starting with 7z.

  (5) open this folder and then find the Util folder and open it.
  
  6) double-click the CCC folder to open it.
  
  (7) double click on Uninstall_L3
  
  NOTE: For 64-bit, the uninstall file will look like and Uninstall_L3_64 for 32 bit, it will be Uninstall_L3

  Now, restart the computer and reinstall the driver software of all the features by using the link below.

  The document reads "HP Officejet and Photosmart full feature software and drivers.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-47754-1 & LC = on & DLC = in & CC = US & Product = 391189 & os = 2093 & lang = in

  Download as follows:
  ===================

  Click on 'Download only' option and select 'save '.
  Save the file to your desktop.
  When the download is complete, double-click the downloaded file and select "Run". This will install the all-in-one software.
  Once the installation is complete, restart the computer.

• All-in-one Officejet J4680: how to set scan to scan the document without cropping afterwards

  Is it possible to configure the scanner so that when I scan a document, the digital space includes only the document itself and not the whole scan bed? In its current form, I have to crop each document to remove the excessive scanning area that is not part of the document.

  @JonnD14

  Install the software of full functionality for the printer.

  Printer:

  Range of all-in-one printers, HP Officejet J4680

  Full software features:

  File name: OJJ4600_Full_14.exe

• I FORGOT the ADMIN PASSWORD FOR - (WEB PAGE) - HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

  Hi all

  I changed my network SSID & PW but I forgot the password for the printer web page.

  Password was written in a notebook and notebook is moved at the moment by the cleaning person.

  Please HELP! Is there anyway I can reset the printer so that the admin password is also re-set. I try to reinstall the software printers, also I am not able to change the ip address and right now, there is no ip address... get no link and no ip address and no network... Please anyone who can help... Please help.

  * I read some part... to power off the printer, then press the power button on... and continue pressing the back button where he would have, for some time the printer is back back (it was to reset the printer)... which is about 23 times... zero.

  I really want to THANK you ALL for READING THIS & YOUR TIME. So please help if you can...

  and ideas?

  Thank you, xxVEGASxx

  * xxVEGASxx *.

  You can do a reset of the printer using the LED screen on the printer.

  Select Configuration, then Tools, then restore the default settings. "Restore default settings" is the last element of the list and you will have to scroll down to see it.

  Which erases all settings, including the password for the printer.

  To reset you describe is probably the one mentioned in this article:

  http://resetprinters.com/how-to-reset-the-HP-OfficeJet-Pro-8600-premium-all-in-one-printer/

  but it's probably a deeper reset that you really need anyway.

  -Seth