HP officejet pro 8600 more. second analysis document

Similar Questions

• HP Officejet Pro 8600 more AIO automatic document feeder paper jam.

  During the analysis of a smaller document using the ADF, he got stuck in the charger. While recovering the document, a corner of the document got torn and is stuck in the document feeder. Now, whenever I use the loader to scan a document once again, that the document gets stuck because of a small piece of paper that is still stuck in the charger. I tried carefully with a toothpick to catch the small piece of paper, but I can't put a finger on her. Is it possible to open a little more? Not only the cover of the power supply unit? Or are there other ideas to solve my problem?

  Thx for any suggestions you may have.

  Hello KrisV

  You have exceeded the article the ADF (ADF) documents does not Pick Up paper? If so, or if the problem persists, try to slightly heavier paper through the ADF. I've seen some clients clear paper jams using this method. Thicker paper can be thick enough to get out any remaining paper. I'm not sure what specific weight of paper they used however.

• OfficeJet Pro 8600 more. No menu auto scan when loading documents in the ADF?

  I have an Officejet Pro 8600 more again to replace the L7780 who brought up the menu scan, when a document is loaded into the autofeeder.  How can I get the only 8600 to do the same.  I find that I liked the convenience of the automatic menu, but it does not come to the top when I load the document (s) to scan in the ADF.  This feature has been discontinued?

  Thank you.  I do enjoy the printer but miss this feature that I scan all my documents in my computer to avoid to keep a lot of paper.

• How can I get my HP Officejet Pro 8600 more to send the scanned item directly to e-mail?

  I just moved to the top of a new HP Officejet Pro 8600 more a HP 6500 printer.  On the old 6500, it gave me the choice to send the scan to my email, however, that option is not available for me on the new scan of 8600 software.  How can I add email to my choice of where to send the scan?

  Thank you...

  Hi NICOLI12,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you want to know how to scan to e-mail.

  I'll be happy to help you.

  You should be able to analyze through the scanning software HP to e-mail can also scan to e-mail from the control panel of the printer. I have provided a document to find out how Scan.

  Hope that solves your problem.

  If you are on Mac, please let me know.

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• HP Officejet Pro 8600 more black vertical line when copy or scan

  HP Officejet Pro 8600 more black vertical line when copy or scan everything in the middle of the page

  Hi Clementstl,

  I understand that you have a 8600 Pro Officejet which puts a black vertical line in the center of your copies/scans. I'm sorry to hear you had to deal with this, but I will certainly do my best to help you solve this problem.

  I recommend the rest of this document of vertical stripes, lines or streaks in the Copies, faxes or Scans as it should be in a position to help to cross that line. The most common cause is a small spot of something on the glass of the scanner, so just make sure that when you're cleaning use you as much elbow grease you can collect

  Just to clarify a little further, if the problem only seems to occur when you use the automatic document feeder, you'll want to focus your attention on the small strip of glass that he uses on the left side. If it only occurs when you use the flat glass, you want to concentrate on the large piece of glass he uses.

  Hope this helps, have a nice day!

• How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?

  How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?  I'm running on Windows 7 64 bit.

  It's strange.  Looks like you have a second paper tray and put it to the default tray.  The second paper tray only supports the types of paper that show on your list.  It's strange because unless you have purchased a second tray paper, plus model has one.  Does only the high-end model.  Other than that, only certain types of media can be duplex, so if you have double-sided printing, it can limit the selection.  I'll watch what else could be the cause and get back to you.

• How can I get my HP Officejet Pro 8600 more to scan a full legal size paper?

  How can I get my HP Officejet Pro 8600 more to scan a full legal size paper? He cut scanning letter-size, but the specifications say it will scan the legal size.

  Hello

  The analysis of parameters need to be changed to HP Scan App. launch of the HP scan application from your computer and select the option left (PDF or JPEG...) and then choose the size of legal scan on the right.

  Save and close the application.

  Now you can scan in legal.

  Note:

  You can also create your own settings for scanning HP scanning parameters.

  Good impression

  Evelyne

• HP Officejet Pro 8600 more N91: Printer crashes with 0xB845D7DC when connect to UPC Ubee cable modem/router EVW3226

  Printing: HP Officejet Pro 8600 more e-All-in-One Printer - N911g

  SN: [personal information]

  REF: CM750A

  FW: CKP5CN1516AR

  Then try to connect to the router wireless (active DHCP), the printer LCD display starts to blink and a second, it displays B845D7DC.

  After that, the printer asks to reset and it restarts with wireless off.

  I have a cable modem with router wireless of my cable TV UPC provider called UPC Ubee EVW3226.

  I tried to connect the printer to the router using the WPS button and provide the password. In both cases, I have the same behavior.

  I have a dozen other wireless home devices that connect without problem to the router. But not the printer.

  Please let me know what other information will be good for you to solve the problem. Or, please provide a workaround solution.

  I found the solution:

  connect to your printer cable (you can use a direct eth between your computer and your printer cable), access the web interface and disable support IPv6 (let the IPv4 only verified): network > General > protocols > only IPv4 verified. Save and restart the printer.

  In 80% of cases, it will work on the wireless connection. For the other 20% when it does not work, try to assign a static IP address to your printer (network > Wireless > IPv4) in a second time. Take data from your router (IP, gateway, DNS).

• HP Officejet Pro 8600 more

  I have a HP Officejet Pro 8600 more and I can no longer scan multiple pages in a document using the ADF and flatbed. I was able to do before. Help, please.

  Have you recently had to reinstall the software or to reset the default settings? In this case, when you go to scan in the pop up window that shows that there should be an option to "move forward." In this window, you can set up your printer to scan in a single document, as opposed to separate in the PDF format.

  Let me know if it helps!

• HP officejet pro 8600 more: double side id or copy scan

  Hey,.

  I have hp officejet pro 8600 and I'm unable to scan or copy id cards on both sides.

  y at - it an option for scanning on part and other identification cards or copy bothh sides of ID card?

  can you please help me with it, because I really scan identity cards, the two side to my computer.

  "" and if there is no video or tutorial on scannig or copy on both sides of the identity card for "hp officejet pro 8600 more ' and then share it with me.

  Thanl you.

  Hi @Sanky1,

  While the document feeder allows the 2 sided copy and scan, the loader will feed not IDENTITY cards. What you can do, is copy each side individually, then put two copies on the document feeder and scan 2 faces. If you want both sides of the card on a single page, same idea, copy both sides individually, then place them copies on the glass to scan so that they are aligned with a scanned page.

  I hope this helps. If you need further explanation or assistance, let me know.

• HP Officejet Pro 8600 more: problem with HP Officejet Pro 8600 more light

  As soon as I turn on my printer after some time one get a short flash printerscreen code: B84D7A4. Subsequently, I get the massage that I have to powerdown the printen and turning the power on again. This repeat hisself without end. If I disconnect the network cable from the printer starts normal. As soon as I connect the network cable, I get the same error code.

  If I connect to another network port, I have the same problem.

  Who knows the solution for this.

  I can still print via USB cable in. But I don't get the option to the printerscreen: SW update.

  Greetings @HPofficejetPro,

  I saw your post about the problems you are having and I can find some things that you can try.

  Have you tried another ethernet cable?

  The same thing happens when you connect with a USB cable?

  HP regularly publishes updates of firmware that can also correct the problem you are experiencing. With the USB cable is connected, you can click on this link to download the firmware update for the. HP Officejet Pro 8600 more e-All-in-One Printer - N911g.

  Is the printer connected directly to a wall outlet or a surge protector or a power bar? We want to connect it to a wall outlet so that we can eliminate the source of energy as the primary cause. See this document for more information on the problems when connected to an uninterruptible power supply/Strip/surge protector power (Note: this document is not limited to printers Laserjet.)

  Please let me know the results, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• HP OfficeJet Pro 8600 more: right margins are ignored

  HP OfficeJet Pro 8600 more

  Windows 7 Pro 64-bit

  The new installation of Win 7 + SP1 + all available updates (this occurs on both this system and on a network XP system)

  The right margins are ignored on all documents sent to the printer.

  Have reinstalled the printer printer twice, without success.

  Printer paper options are set to 'Custom' quality (whatever that means) and plain paper (letter size).

  It doesn't seem to be an option for shrink-to-fit in Outlook 2010, so I bet the problem is a driver conflict. Try using a different driver for the printer. I'll link the instructions below. Let me know what happens.

  How to assign other drivers to print in different Versions of Windows

• HP Officejet Pro 8600 more indicates 'missing or does not print head ". I followed HP 4 instruct. Help

  HP Officejet Pro 8600 more indicates 'missing or does not print head ". I did 4 HP instructions and now I'm #4: contact HP. I cleaned the heads, replaced the 4 cartridges, removed and replaced the unit restarted, everything. Now what?

  There is a document with measures to help address the missing or condition is not the print head.  This document can be found here.

  From your post, I understand that you did some the most of these steps, but run Solution 4: replace the print head.

  If you are still in warranty, HP can replace the printer/printhead without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:

  https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us&DLC=en&LC=en&product=5061082

• Set up the date and time on a HP Officejet Pro 8600 more

  How do you set up the date and time on an Officejet Pro 8600 more?

  I'm going to fax setting, and then there is a dispute of options:

  Resolutions

  Lighter or darker

  Send the original documents by fax

  Set as new default values

  Fax set up but nothing on the date and time.

  Please e-mail me step by step instructions

  Note: The user manual has no instructions for this date and time to set up

  Thank you

  Go to the printer settings. Go to your preferences. There is an option DATE and HOUR.

• "Scan To E-mail" configuration on HP Officejet Pro 8600 more N911g

  It's the same problem reported by several other users of this forum to which no solution has been provided.
  
  I was not successful to set up the scan e-mail option for a HP Officejet Pro 8600 more N911g bought 12 August 2012 and using CLP1CN1150CR firmware.
  
  I'm trying to do through the interface of the Web server built into the printer from an iMac running Mac OS X 10.6.8 and the 5.8.0 HP utility.  More specifically the page under 'outgoing Scan-> Scan to E-mail-> e-mail profiles.
  
  I tried 2 SMTP from different servers, each one works well to send the email from the computer: Apple iCloud mail service (formerly Mobile Me, formerly known as.) Mac) and AT & T Net messaging service.  I checked the server name, port number, and authentication login and password were all correct.
  
  When scanning to email serves as the printer, I get an error message: unable to connect to the server.  Check the address and the name of the server.
  
  During a test of the computer when configuring a profile of outgoing mail, I get an error message: the device was unable to send the test e-mail message. (EmailAccounts-timeout).
  
  When I try to configure the page under "Settings-> E-mail Alerts-> mail server" and use exactly the same values as those in the e-mail profile out above, registration and Test option fails with an error message: the device was unable to send the test e-mail message.
  
  Oddly enough, I am able to use the client to the computer with the option scan to the computer-> e-mail in PDF format or by e-mail in JPEG format.  With this option, the file is scanned and added as an attachment to an e-mail message from the Mail in Mac OS X client.  The e-mail message is sent via SMTP server even when I press the button send.
  
  All the error messages seem to indicate that the client software of electronic mail of the printer is unable to establish a connection to the SMTP server.  However, it is unclear what configuration setting is one that could be the cause of the problem.

  After further research, I noticed that there is another default possible values of port Simple Mail Transfer Protocol (SMTP):

  • Port 25 is the standard SMTP port number.
  • Port 465 is the number of SMTP over SSL, Secure SMTP (SSMTP) port.
  • Port 587 corresponds to the port number dedicated for a presentation Mail (MSA) Agent that uses a variant of SMTP, as specified in RFC 6409, which requires that clients are authorized and authenticated to use the filing of mail service.