Text display problems - glyphs instead of letters

Similar Questions

• TEXT DISPLAY PROBLEM IN CAMERA RAW

  Hello

  I have a text display problem in Camera Raw. Where there are labels of boxes that need to be checked, for example in the preferences or settings to be pasted to another file, the text is unreadable print. What happens is that he takes to the bottom of half of the top line and half top of the bottom line, rather than by extending the line if the text is only on a single line. It is a problem for me to see all the options. It's the same on all the text of the label within the program.
  
  I have attached a few screenshots to illustrate the problem.

  Any ideas would be greatly appreciated.

  Thank you very much
  
  Carl

  The problem is not with the size of the screen, but with the "pixel density" (never forget, that the density of physical pixels of the monitor is indicated). Right-click on the desktop and select Properties (or go to control panel and select display). On the Control Panel, select Advanced; the general Panel contains the DPI setting. I guess that the parameter is now greater than 96 dpi.

  I created a thread on this problem, which must have been at least two years ago. The answer was, as 1. Adobe will solve the problem, 2. It is a problem only with the classic Windows style (under the appearance tab). I have not tested with the XP style, because I prefer the classic style; I'm cursed and live with this shit (my setting is 120dpi).

  BTW, this may be much worse than half-readable labels: buttons, fields, text can disappear completely (you may even not notice, that there should be other buttons and the Panel options)...

  Gabor

• Text display problem...

  I want to put 3 or 4 line text fields. Each text field with the text. And I changed the size of the font of the text in textfields dynamically.

  I assign x value for each textfield as follows:

  take into consideration txt0, txt1, txt2 and tx3 fields are there...

  txt0.x = 0;

  txt1.x = txt0.x + txt0.textWidth + 5;

  txt2.x = txt1.x + txt1.textWidth + 5;

  ... like this

  I placed these textfields in a moveiclip in one line.

  But the problem is, when I change the font size, if a textfield has two words, it displays first word completely, but second word appears in the form of the half.

  Suppose that if «The song of soup...» ' is a text in txt0. It appears as "Soup." so

  Help me please if anyone knows. And I think that it is the width of the textfield problem. If this is you please mention, how to solve?

  I just increase the width of the textfield when I increase the font size.

• A single site is text display problems, but it is not the case with IE.

  The text does not appear on a single website only, and only in a part of the site and there seems to be only one type of text.

  http://WOL.JW.org/en/WOL/h/R1/LP-e

  http://WOL.JW.org/en/WOL/b/R1/LP-e/NWT/E/2013/45/14

  It is the Bible, and the text of the Bible is the only part that is not displayed correctly. I uninstalled and reinstalled.

  FF 40
  Windows 7 SP1 64 bit

  IE displays the same site and the pages correctly.

  
  

• Text display correctly - pieces of missing letters, some shadows, etc.

  This does not always happen, but it usually does. Affects the emails and text on Web sites, in particular (I think) those of the small fonts. Sometimes, it resolves after a minute or two. Does not occur in Internet Explorer.

  Thanks to you and Phillip for your help. I put this question to our guys in IT, who has updated the driver but also made a few other settings too (something to do with the fonts). The problem disappeared, but they're not sure what they did that fixed it.

• Text rendering problem ADE 2.0

  I am using ADE 1.7 with EPUB on my PC. Yesterday I updated to 2.0, but it seems to have some sort of a text display problem.

  http://i.imgur.com/ZihT8.PNG

  As you can see, the text has a kind of a resolution problem.

  When I adjust the size of the window, the text seems to change with him too, change it with each pixel pixel-clutter I move border group. Justified text or an alignment, it is not serious, nor the size of the font, I choose in ADE (best appearance larger sizes of fonts, but they still have that problem). Cover photos are so pixelated.

  It seems that if it resizes each line or something.

  I have an ATI HD5670 video card, with the most recent driver if that helps. The desktop resolution is set to 1440 x 900.

  Any tips? What could be the problem?

  Geeeeez, I thought about it.

  The text looks pixelated when sidebar is open on the left (for example, the table of contents). When I close it and that the text occupies the entire window, then it is legible and perfect. I didn't even try to close, because in 1.7.2 I opened it all the time and accustomed to it.

  Then when I open the sidebar, it is not just to reduce size of the text box as he should, but trying to resize instead, then the text gets pixelated and crushed. At least that's my theory.

  I hope that this bug is corrected in the future.

• Police problem - little boxes instead of letters

  Two programs on my computer stopped to display fonts and rather shows unicode null glyphs where letters should be. This means that I see little boxes instead of letters. The two affected programs are HP Support Assistant and AMD Catalyst Control Center. I am running Windows 7 Home Premium on an HP dv6t laptop. My GPU is a Radeon 6770 M.

  I've already performed the repair of .NET framework tool. I uninstalled and reinstalled the programmes concerned. I have my GPU drivers updated and updated both programs as well. Nothing has worked. A bit of ' net research has led me to believe that some fonts were removed somewhere. But I'm really lost at this point. Any help is appreciated.
  UPDATE:
  1. I went to HP Support Assistant properties, and under the Compatibility tab I did run in compatibility mode for Windows 7. This fixed the fonts for HP Support Assistant.
  2. I went to my other Windows 7 PC and copied the contents of the folder fonts on a USB key. Then I plugged the USB into my laptop and copy the fonts folder fonts of the laptop, replacement of all the old files of fonts. Then I reset my computer. This fixed my issue.

  Hello

  It seems that you have addressed the issue. Your efforts to solve this problem is appreciated.

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows. We will be happy to help you.

• How to configure CPU Meter so that it displays the image instead of the text version.

  How to configure CPU Meter so that it displays the image instead of the text version.

  Hi John,.

  Welcome to the Microsoft community.

  The CPU Meter gadget shows the status of the two main resources, you can follow on your computer - the use of your CPU and memory.

  To install the CPU Meter gadget in Windows 7, just right click anywhere on your desktop and click on Gadgets. Search the CPU Meter gadget and drag it to your desktop.

  See the Microsoft Article below and check if this is useful:

  http://Windows.Microsoft.com/en-us/Windows7/customize-desktop-gadgets

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• PDF file print symbols instead of letters/numbers

  Hello

  PDF file prints (square) symbols instead of letters/numbers. I've tried different printers, assume that is not a defect in the print settings that the problem occurs with all used printers. What can I do? Would appreciate a step by step description possible solutions. Thank you.

  Open the application book fonts. Select all the fonts, and then select "Validate fonts" in the file menu.

  Additional instructions can be found here: the basics of the Mac: font - Apple Support book

• squares appear instead of letters to various places in windows.

  Squares appear in various places, including the headings of the different programs, rather than letters.  By clicking on the element shows a correct operation.

  Hello jonmarx,

  Boxes instead of letters are appearing.

  Open command prompt and run the following command SFC/scannow.
  
  
  
  This will scan the system files and fix any errors that it can.

  Here is a link to the command prompt.
  
  
  
  When you open the prompt, right click and run as administrator.

  You can also run a system restore if the problem is not too long.
  
  
  
  This will bring the system back to when everything worked correctly without affecting any of your personal files.

  Here is a link on how to do a restore.

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  I would like to know how everything goes.

  Nice day.

• Computer Compaq cq56 laptop types numbers instead of letters

  Compaq CQ56 laptop

  product # XG809UA #ABA

  Windows 7 64 - bit os

  Enter numbers instead of letters. I have to uninstall keyboad in Device Manager and restart the laptop to make it work again. The keys on the keyboard to solve the problem? Keyboard does not Num Lock key.

  Hello

  It is possible that this could be a hardware problem, try the following.

  In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Go to Device Manager and uninstall the keyboard like you did before.

  Then shut down the computer, disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Kind regards

  DP - K

• When I try to type with the keys that have numbers on them, I have numbers instead of letters.

  The keyboard of my laptop does not work correctly.

  I have somehow turned the keys of the calculator and when I try to type with the keys that have numbers on them, I have numbers instead of letters.  Does anyone know how to disable this option?

  I use a laptop with a wireless keyboard to send this message, but want to use my laptop keyboard.
  Help!

  Hi newsgirl,.

  Somewhere at the top of the laptop keyboard is a key that says Num Lock (or Num Lk or something like that).  It can be accessed directly, or you may need to press a key to access (or some other keys).  In any case, you must click this to turn off the number lock because it is what causes the problem.  This key is usually used on laptops to create a section of a regular keyboard that can act as the normal keyboard calculator keypad (for those who need that, like accountants or persons who need to enter strings of numbers).  Once you turn it off, you will be fine as the keyboard returns to normal.

  I hlpe that aid.

  Good luck!

• HP 15 r250tu: Hp 15r250tu display problems

  Hello

  Recently, I bought Hp15 r250tu and since I used it, I was faced with display problems (screen flickers and shows a lot of big white pixels flickering on the screen).

  However, I have been facing this problem for browsing the web and did not face problems when using my laptop to watch full HD videos or play casual games.

  I also downloaded the Intel HD from the Hp website drivers and the problem is still not resolved.

  Please, help me to solve this problem.

  Hi @tushar_soni ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your laptop HP 15-r250tu and get an error on some Web pages or glitter. Remove temp files don't help with sites or problems with the browser.

  Cookies are small text files that Web sites put on your computer to store information about you and your preferences. You can remove these preferences by following this Microsoft document Remove and manage cookies.

  Have you tried another browser?

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that may require the update which could cause flickering.

  I would like to know how this happens.

  Thank you.

• keyboard is typing numbers instead of letters when I play a video game on my PC

  Original Ttile:keyboard is typing numbers instead of letters

  I recently had problems and it only happens when I play a video game on my PC, I run the video game, I want to change my control panel EX: 'I want to change the market toward the front of the button up to W'. When I press W it turns into a number, I press again and turns into a different number, I don't know how this happened, but it happened as a day or two before, can someone please help me solve this problem?, oh and it's a step a portable office.

  If you have recently installed the thing on security of comcast, try disabling it.
  It tends to ruin the keys during the game.

• display problems, shut downs, restarts

  Original title: Windows 10

  I have upgraded from windows 7 to windows 10. I hate it, I have had no trouble with my computer since then, display problems, shut downs, restart ect this is the worst operating system. my computer is only a year and a half. I did all the recovery disc, the system image, repair disk and back ups from the first day. at - it someone now how to return to windows 7 or I have to take it to a tech and spend more money and time. I would also not recommend 10 to anyone unless you want a mobile phone instead of the computer. I might be old school, but I never had these problems before installing windows 10. Help

  Hello

  Use them if you want to try to fix the problems. Because the computer is not
  This old do not forget to check with the help of the manufacturer of the motherboard of the system,.
  their documentation online and drivers and ask in their forums on any

  known issues and compatibility.

  If you are a 3rd party antivirus on the operating system you upgraded OR if you have a
  now uninstall it and then run the removal of its creator tool. Use Windows Defender
  in Windows 8/8.1/10 is a complete antivirus. Despite all the hype out there
  Windows Defender and Windows Firewall are real superstars.

  List of tools to clean/uninstall anti-malware programs
  http://answers.Microsoft.com/en-us/protect/wiki/MSE-protect_start/list-of-anti-malware-product-removal-tools/2bcb53f7-7ab4-4EF9-ab3a-6aebfa322f75

  Uninstallers (removal tools) for common antivirus software
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN146

  ===============================

  Check this box:

  Right click on start - Control Panel - the troubleshooting button - right click Show all.
  Maintenance of the system.

  -----------------------------------------------------

  Windows key + X - command prompt (Admin)

  SFC/scannow

  Note If this poster of uncorrected errors - do underneath without worrying.

  When finished that run these:

  DISM / online/cleanup-image /scanhealth

  DISM / online/cleanup-image /restorehealth

  Note If this indicates errors not corrected - do underneath without worrying.

  Then, restart the computer.

  Make sure that you run the BIOS and latest drivers available.

  Look for the updates with system Maker (manufacturer of motherboard for customized systems)
  for BIOS, chipset of low level driversand the major embedded and separate
  device drivers. Run update DriverView - VIEW driver Microsoft set hide -.
  those without drain on their behalf.

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit system Maker as replacements and manufacturer device which are the
  most up-to-date. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double-click - driver
  tab - write version information. Now click on UPdate Driver (this cannot
  No matter what as MS is far behind the certification of drivers) - then do a right click - Uninstall.
  RESTART this will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and
  then device Maker (Realtek, Intel, Nvidia, ATI, for example) of the site and get their
  the most recent versions. (Look for BIOS, Chipset and software updates from the Maker system
  (website here).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so to install a driver - restart
  -check that it is installed and try again if necessary.

  Repeat BTW to the manufacturers - manufacturers of devices DO WORK DO NOT THEIR SCANNER-
  Heck manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">