HP Officejet Pro 8600 more sees two wireless routers - does not connect

Similar Questions

• HP officejet pro 8600 save as editable text (OCR) does not

  HP officejet pro 8600 save as editable text (OCR) does not

  the printer reports: can not detect install OCR s/w...please

  IrisOCR 12.3.4.0 is indicated as being installed

  How can I get printer recognize/find OCR?

  1 uninstalled existing installation

  2 deleted all files

  printer 3.re - installed s/w

  4 still does not

  5 uninstall printer new s/w (about you 4th time)

  6. deleted all files in HP printer

  printer 7.re - installed s/w BUT

  8.re - installed in a different folder: HP-2

  Now everything works fine

• HP Officejet Pro 8600 more N91: Printer crashes with 0xB845D7DC when connect to UPC Ubee cable modem/router EVW3226

  Printing: HP Officejet Pro 8600 more e-All-in-One Printer - N911g

  SN: [personal information]

  REF: CM750A

  FW: CKP5CN1516AR

  Then try to connect to the router wireless (active DHCP), the printer LCD display starts to blink and a second, it displays B845D7DC.

  After that, the printer asks to reset and it restarts with wireless off.

  I have a cable modem with router wireless of my cable TV UPC provider called UPC Ubee EVW3226.

  I tried to connect the printer to the router using the WPS button and provide the password. In both cases, I have the same behavior.

  I have a dozen other wireless home devices that connect without problem to the router. But not the printer.

  Please let me know what other information will be good for you to solve the problem. Or, please provide a workaround solution.

  I found the solution:

  connect to your printer cable (you can use a direct eth between your computer and your printer cable), access the web interface and disable support IPv6 (let the IPv4 only verified): network > General > protocols > only IPv4 verified. Save and restart the printer.

  In 80% of cases, it will work on the wireless connection. For the other 20% when it does not work, try to assign a static IP address to your printer (network > Wireless > IPv4) in a second time. Take data from your router (IP, gateway, DNS).

• Printer HP Officejet Pro 8600 Plus works but the Scanner does not

  I recently bought a Toshiba laptop with Windows 7 Home Premium operating system.  My previous laptop is a Toshiba also upgraded to Windows 7 Home Premium operating system.  I have a printer HP Officejet Pro 8600 more all-in-one printer.  The printer/scanner works fine with my laptop more older but with the new laptop that I can't get to the printer.  I am not able to get the scanner to work.  I reloaded the software several times but the scanner still does not work.  The scanner works fine with laptop more old, even if it has the same operating system.  I get an error message that says "Scan of the computer is turned on.  You can start a scan from the printer.  Your computer is not listed as an available computer control panel of the printer.  If please restart your printer and try again. "Can anyone help with this?

  Hi ranjisamaraweera,

  Even though I'm MVP I represent Microsoft or speak. If I can and will speak
  as I think.

  The proper functioning of the printer and Scanner is the direct responsibility of the producer of material
  and no windows. There are hundreds of these devices that work correctly on Windows 7 if
  those who don't have no drivers and other interfaces which are not compatible to Windows 7 should be
  written correctly. Of course many older devices are not supported by their creators for later
  Versions of Windows. Microsoft passes but does not write drivers and interfaces
  Printers and Scanners need to function properly. So, the manufacturer and no one else, is totally
  Manager to see if there are interfaces and appropriate drivers.

  Many device makers do not write new drivers and interfaces for older hardware because either
  they cannot support the new methods or because they want to sell new hardware.

  Personally, I don't think that Microsoft is lying because they also say that device manufacturers have the
  Omos unique to provide the necessary compatible drivers and interfaces.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Officejet Pro 8600: Upgrade to Windows 10 and does not recognize the printer scan function

  What should I do to get my scanner to work with Windows 10?

  Hello

  Re-install or update software and driver help. But what is your HP Officejet Pro 8600? HP Officejet Pro 8600 - N911, it must be* where * can be from a to z.

  Kind regards.

• HELP, hp officejet pro 8600 increased, it appears it still is "not connected".

  Just set up this printer and can't seem to get rid of the message "not connected". have in fact had a hand connected green check mark once but he disappeared and I can't get it back.

  Thank you

  Hi there, are you referring to the status of the printers in your account ePrintCenter, as in the image below? The printer give up the connection to the network local WiFi or a problem with your internet gateway (router) maintain that a reliable connection to the internet could be possible causes for what you see. Check out this support document for possible solutions to the problem of the printer not to maintain its http://support.hp.com/us-en/document/c02817031 wireless

  Feel free to post if you are still having problems. All the best.

  

• OfficeJet Pro 8600 Plus: Scan of the computer does not work with Win8.1 [solved: problem with USB3 Boost]

  Since I have installed 8.1 (pro), I can't use my 8600 software Pro for scanning the computer (via USB). It seems that there is no communication with the printer regarding the scanning software, but printing as usual.

  Tried to use the HP printer Assistant: when I click on the button "scan a Photo Document or", I get a message "inaccessible Scanner. Also restarted the printer.

  When I try to scan from Photoshop, the system first finds the printer, but it fails to connect.

  Update HP says that my system is up to date.

  HP Print and Scan Doctor 4.2 concludes and tells the printer on the welcome panel and seems to be able to communicate with him, up to a point.

  It gives me a error 'pilot' (sorry if is not called in English - he takes over my keyboard language, which is French and says "Pilot error") and says that no communication could be created between the printer and the driver for scanning, and I have to restart the computer...

  So I did and revived the software of the doctor, who gave me the same error message. This time, I clicked on 'Ignore' and let things. He ran a "Scan" Test twice and said that everything was going well or had been repaired. But strangely nothing on the printer during these 'tests '. And in the end, as he offered to do a scan test myself, I clicked on OK and I got the error message "inaccessible Scanner" again.

  Then I did my scans on a USB key, as I have done a few times already, and has gone very well. But I'd be happy to have this function "Scan to computer" back. How?

  Thanks in advance 23. It is resolved! See to the end.

  I use McAfee (All Access - Total Protection). All green. I did some research using 'Paint', 'Windows Fax' and 'Scan' and checked all the results using McAfee: 'does detect any items that require your attention.

  Here is a series of screenshots when you run printing HP and doctor Scan:

  

  

  I click on "Scanning troubleshooting..."

  

  I click on 'Ignore' right now because I know now that a restart will not help, but I have already tried (see my first post).

  

  

  It seems that the problems have been repaired. And if I click on 'Scan Test', it seems too good, initially...

  

  But if I go on and click on "Scan", bye bye:

  

  Everything is the same as the first time, as I remember.

  I checked services: dependencies are OK (RPC is in the WIA Service dependencies). Both services are "Running" and "automatic". I stopped and restarted WIA. No change.

  I launched a sfc/scannow:

  

  Before that, I changed the USB (a new one): no change.

  AND THEN: I unplugged the USB cable connecting the port (USB3) standard (directly on the rear panel of the motherboard) and plugged into a PCI USB3 card. And all was well with the scan.

  Do you think this says something about my motherboard (Asus X 79 Deluxe brand new) or on the Officejet?

• OFFICEJET PRO 8600 Plus: OFFICEJET pro 8600 more

  I have been using my OFFICEJET pro 8600 more for a few years with no problems until now. It is connected wireless to my network and it is unusual. I can print a single item and then it loses the connection. I have to turn the printer off and power turn it back on, then I can print another point and it disconnects again...

  very frustrating that someone knows how to fix this?

  I use Apple and PC. Same question with all devices and computers.

  Thank you

  Greg

  Hello! Welcome to the HP community @WilSwann,

  I have seen your post on how your printer is disconnect your wireless network and wanted to answer with my suggestions.

  Check out this link and try all the steps that are listed here. Normally, they help with this type of concern and hope that they will help fix yours too!

  HP Officejet Pro 251dw, 276dw and 8600 Printer Series - printer keeps no connection Wi - Fi
  
  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  If there are any problems, please let me know
  
  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• HP officejet pro 8600 more: double side id or copy scan

  Hey,.

  I have hp officejet pro 8600 and I'm unable to scan or copy id cards on both sides.

  y at - it an option for scanning on part and other identification cards or copy bothh sides of ID card?

  can you please help me with it, because I really scan identity cards, the two side to my computer.

  "" and if there is no video or tutorial on scannig or copy on both sides of the identity card for "hp officejet pro 8600 more ' and then share it with me.

  Thanl you.

  Hi @Sanky1,

  While the document feeder allows the 2 sided copy and scan, the loader will feed not IDENTITY cards. What you can do, is copy each side individually, then put two copies on the document feeder and scan 2 faces. If you want both sides of the card on a single page, same idea, copy both sides individually, then place them copies on the glass to scan so that they are aligned with a scanned page.

  I hope this helps. If you need further explanation or assistance, let me know.

• HP Officejet Pro 8600 more paper tray will not go

  [In the case of a post to repeat it is because I could not tell for sure one was actually published.]

  Product name: HP Officejet Pro 8600 more. OS is Windows 7

  First of all, I saw many possible solutions in Google search, and many of them related to the HP printers support blogs and none of them have worked for me.

  Like so many others, the problem started with my change drawer to manage envilopes. Many worked, but now the drawer don't go all the way - it stops at 9/16 inch short to be completely closed.

  I adjusted and readjusted the tray for legal size.

  I shook the left and right drawer closing.

  I removed all the paper and two sizing medium frame settings.

  I checked the track inside and the slider on the status bar and see no obstacles.

  I raised and lowered the ramp at the end; It lowers at the beginning of the slide.

  By pulling the drawer I found a slight resistance during his visit to the position of 1 inch.

  I slipped the paper-stop in and out and it positioned perfectly.

  I cycle powered by the printer.

  I can't help but think there must be simple somethinbg behind it all. Maybe a bit of lubricant in the mechanism?

  Help, please.

  I was right - something simple. Me. It seemed that the ferry was going all the way because of the gap between the drawer and the housing. I thought it was a problem because I have sent to the printer of things would not print. I still don't know why, but it seemed to be a problem with the mechanical - 'print' in applications is dimmed. But now everything seems to be in order. My apologies to those who have spent the time thinking about my 'problem'...

• OfficeJet Pro 8600 more Driver

  Purchased the Officejet Pro 8600 more a week ago. Installing Wi - Fi with my iMac OS 10.8 (Mountain Lion). Worked fine for about a week, but then I lost the WiFi with my iMac. Downloaded the latest full installation and followed the instructions from HP to re - connect wirelessly. Works fine now, but I have the Version 1 pilot. My original CD installation had Version 3.3.3 with more features. That's happened? How can I obtain the driver Version 3.3.3 back? Thank you. GNG

  Hello

  This occurs because of the use of AirPrint, add the printer with the HP driver and it should provide the same functionality.

  go to System Preferences and select printing & scanning.

  Click on the sign more and select the HP Officejet Pro 8600 list, then click the menu drop-down use and select the HP printer model default AirPrint option instead.

  Now, try to print via the newly created print queue and check for the difference.

• "Scan To E-mail" configuration on HP Officejet Pro 8600 more N911g

  It's the same problem reported by several other users of this forum to which no solution has been provided.
  
  I was not successful to set up the scan e-mail option for a HP Officejet Pro 8600 more N911g bought 12 August 2012 and using CLP1CN1150CR firmware.
  
  I'm trying to do through the interface of the Web server built into the printer from an iMac running Mac OS X 10.6.8 and the 5.8.0 HP utility.  More specifically the page under 'outgoing Scan-> Scan to E-mail-> e-mail profiles.
  
  I tried 2 SMTP from different servers, each one works well to send the email from the computer: Apple iCloud mail service (formerly Mobile Me, formerly known as.) Mac) and AT & T Net messaging service.  I checked the server name, port number, and authentication login and password were all correct.
  
  When scanning to email serves as the printer, I get an error message: unable to connect to the server.  Check the address and the name of the server.
  
  During a test of the computer when configuring a profile of outgoing mail, I get an error message: the device was unable to send the test e-mail message. (EmailAccounts-timeout).
  
  When I try to configure the page under "Settings-> E-mail Alerts-> mail server" and use exactly the same values as those in the e-mail profile out above, registration and Test option fails with an error message: the device was unable to send the test e-mail message.
  
  Oddly enough, I am able to use the client to the computer with the option scan to the computer-> e-mail in PDF format or by e-mail in JPEG format.  With this option, the file is scanned and added as an attachment to an e-mail message from the Mail in Mac OS X client.  The e-mail message is sent via SMTP server even when I press the button send.
  
  All the error messages seem to indicate that the client software of electronic mail of the printer is unable to establish a connection to the SMTP server.  However, it is unclear what configuration setting is one that could be the cause of the problem.

  After further research, I noticed that there is another default possible values of port Simple Mail Transfer Protocol (SMTP):

  • Port 25 is the standard SMTP port number.
  • Port 465 is the number of SMTP over SSL, Secure SMTP (SSMTP) port.
  • Port 587 corresponds to the port number dedicated for a presentation Mail (MSA) Agent that uses a variant of SMTP, as specified in RFC 6409, which requires that clients are authorized and authenticated to use the filing of mail service.

• do I have to buy color ink cartridges? HP Officejet Pro 8600 more Windows XP

  HP Officejet Pro 8600 more

  Windows XP

  The printer will not print anything (including black and white which is my default setting), at least that I have installed a new yellow ink cartridge.  He says that the cartridge is exhausted and must be replaced before printing.    I have black and white printing color cartridges? Is there a solution? Thank you very much.

  DavidDavid salvation,

  Yes, you will need to replace the yellow cartridge to continue printing. Here's a good explanation of the design of the print mechanism, and what is needed to keep them in good working condition. Your printer is user replaceable print head. With this printer's ink lines that need to be filled in ink in this way that the print head should not be clogged jets in turn cause poor print quality problems.

  Written by Bob_Headrick on the wire note: http://h30434.www3.hp.com/t5/Other-Printing-Questions/Officejet-8500-won-t-print-Black-ink-only-if-other-colors-are/m-p/1706581#M67899

  HP, as other printer manufacturers, offers you with permanent print heads printers requiring ink for all colors, avoid the print heads.  HP, like some other manufacturers, also offers printers with user replaceable print heads.  These may of may not require ink in all colors in print, even though damage may occur if the print from the cartridge empty.  Finally, HP as some other manufacturers also offers printers with the printhead into the ink supply.  He is replaced at each change of cartridge.  These printers will happily print with a diet low, empty or many deleted completely same models.

  When you buy your next printer (from HP or from another manufacturer) be sure that you understand what is the type of printer and choose one that fits your needs.

• How can I get my HP Officejet Pro 8600 more to send the scanned item directly to e-mail?

  I just moved to the top of a new HP Officejet Pro 8600 more a HP 6500 printer.  On the old 6500, it gave me the choice to send the scan to my email, however, that option is not available for me on the new scan of 8600 software.  How can I add email to my choice of where to send the scan?

  Thank you...

  Hi NICOLI12,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you want to know how to scan to e-mail.

  I'll be happy to help you.

  You should be able to analyze through the scanning software HP to e-mail can also scan to e-mail from the control panel of the printer. I have provided a document to find out how Scan.

  Hope that solves your problem.

  If you are on Mac, please let me know.

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• How to set the date and time on my HP Officejet pro 8600 more?

  How to set the date and time on my HP officejet pro 8600 more?  It just on a printed journal Jan-oo-oo fax shows 00:00 AM.  There are no instructions on how to change this.  I need proof that I sent a fax to a certain date and time.  Help, please.  Thank you

  Hello

  Below are the steps to set the Date and time for your device:

  1. On the Control Panel, press the right arrow key ( ), press Setup ( ).