HP Officejet Pro 8600 most not recognized on the network

Similar Questions

• OfficeJet Pro 8600 N911a not connect to the network

  Hello. I hope someone can offer a solution to my lack of connection network printers.

  I followed each step that I can find to understand why the printer is not connecting to the network. Including uninstalling/reinstalling, turn off and turn on all systems and following the steps help diagnosis HP.

  According to "the wireless network test results:

  Wireless: 'PASS '.

  Connectivity: Connected "does not work".

  Network: SSID found 'Pass '.

  Printer compatible with Wireless Router Settings 'Pass '.

  No filtering "Fail" (MAC address filtering is disabled - I double checked)

  Channel 'does not work '.

  Security 'Pass '.

  Help would be very appreciated.

  Thank you for your time.

  Hello

  Try following the steps below and check if this can help:

  http://support.HP.com/us-en/document/c02480179

• HP OfficeJet Pro 8600: Printer is found on the network

  The printer has been working fine for months, and today it is not accessible to the assigned IP address. No computer can print it or find, even when manually enter the IP address, even if the printer is connected (it scans to a network folder and self-diagnosis is OK for the wireless and network).

  Any suggestions welcome.

  Thank you very much

  François

  Hi François,

  Try restarting your router by unplugging its power for several seconds, then let a minute or two to start.

  Restart the printer as well and check for the difference.

  If it does not help click on the network on the printer icon, tap Settings and select Newtork default settings, then try to restart the PC and try to print again.

  Please let me know if this is useful,

  Otherwise I would like to know the exact IP address of the printer.

  Shlomi

• 8600: scan Premium OfficeJet Pro 8600 does not work since the upgrade of Mac to 10.10.1 (Yosemite)

  Since the update of my MacBook Pro in Yosemite, I can't function of the computer analysis to work. I downloaded again the softwear & reinstalled; reset the printer, repaired disk permissions, etc. nothing works. I also note that the HP Utility icon no longer appears.  Print and copy work very well. Any suggestions?

  I tried everything above. When I add the printer driver printer HP (instead of AirPrint) does not show as an option (even if I can find it in my downloads folder). Option is the HP DeskJet that comes with a warning that it cannot be the right driver. Also downloaded what seems to be the right driver on the HP site. He also appeared in my downloads folder. HP utility always not available.

• My new HP Officejet Pro 8600 will not analyze superior at 300 dpi of the location of the single document.

  My new HP Officejet Pro 8600 will not scan more than 300 DPI when scanning individual photos on the glass plate. I do not use the document feeder. I use this printer wireless on an iMac and a PC.

  Hello

  You can pass the value of hp scan: launch of the demand application, select the shortcut to scan (PDF or JPG to the left) and change the resolution you want and save.

  This will send down the printer settings. So the next time you scan, the printer uses these settings.

  Good impression.

• OfficeJet pro 8600: printer works fine, but the software is not

  Printer works fine.

  However, the HP support the program "HP OfficeJet Pro 8600" will not start. I can see it in the HP folder under all programs, but clicking on the program name has no effect. The program name poins to "C:\Program HP HP Officejet Pro 8600\Bin\HP Officejet Pro 8600.exe" - UDCDevicePage Start

  In addition, in devices and printers in Control Panel, the printer connected displays. By double clicking on the icon takes me to...

  

  Opening HP All - in - One Printer Remote takes me to the window right... but the printer shows offline, and the various functions (scan, fax, etc.) are not available. (As noted, the printer is currently online, and I can print correctly.

  Connection to the wireless printer.

  All these functions work fine if I call them from the physical control on the front of the printer Panel.

  I don't know if these are two separate issues, or the two aspects of the same problem.

  Any thoughts?

  Thank you.

  Hello

  Try to install the following hotfix, then try to open the HP Officejet Pro 8600 software:

  http://support.HP.com/us-en/document/c03640384

  You can see any difference?

• HP Officejet Pro 8600 no possibility to configure the Port

  My OS is Win 8.1 (last version), latest version of the printer driver, last wizard to install printers used.

  My first printer "HP Officejet Pro 8600" folling down on the issue of the screen. I'm doing a swap with the same model, I have to uninstall and reinstall the full with Wizard, now I have some difficulties to recognize the printer.

  -Shortly, no communication!

  -A few times, printing find after printer communication error.

  If I go to "Properties/Port/port" I got "Error Message.

  > An error occurred during port configuration.

  > The file name, directory name or volume label syntax is incorrect.

  Could be a former key stay in the registry (with the old link to the printer)

  I have to uninstall and reinstall the wizard fuul without success.

  Now the analysis feature does not run and printing run with delay.

  Major Remarq:

  I have no problem with MAC OS 9.x to 10.10.1

  Thank you very much in advance for your support

  Hello

  The port must not be changed that way but through the HP software, it is managed by the software and such a mistake is planned during the attempt to change the port...

  Try opening the HP Officejet Pro 8600 software, and then click the Utilities.

  Click Update IP address and type the IP address of the printer, which can be found by clicking on the icon wireless/network at the top of the Panel before you the printer.

  Click on save and confirm, then close and reropen the HP software,.

  What happens when you try to scan now?

  It'll work, or is there a specific error or behavior?

  As well try now the doctor of printing & scanning HP, it is listed under the Utilties batn so, follow the steps on the screen by selecting the difficulty of analysis and let me know the results if you are still having problems.

  Shlomi

• OfficeJet Pro 8600 - find IP address on the touchscreen

  On my Officejet Pro 8600, how can I find the IP address on the screen touch printer?  Thank you.

  "View the network settings" menu of the façade

• HP Officejet Pro 8600 Plus stopped Scan of the computer... Said the computer could not be found. Help!

  Hello

  I've been enjoying our HP Officejet Pro 8600 more MFP for a year now.

  Analysis of the it function on our machine no longer works. It indicates that the computer cannot be found. I used this feature all the time in the past.

  I can acquire a scan from an application, like Photoshop and I can scan to a removal storage device, but I can't use the computer Scan, and I really liked this feature!

  A few days ago, our computer has been infected by a virus. A Norton agent could succeed in eliminating it. Do you think this could have disabled the feature computer scanning?

  How can I get the MFP to recognize my computer again? I've looked up and down and impossible to find the solution for this.

  Thanks for any help you can provide!

  (With the help of a HP PC with Windows 7 64-bit)

  This solution fixed my problem:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/scanning-function-does-not-work-but-able-to-print-from/m-p/3604099/highlight/false#M83505

  Thank you very much!!

• HP Officejet 8600: HP Officejet Pro 8600 - does not print lower 1/3 of the page

  Text & images on lower 1/3 of the pages do not print on my 8600. I believe that I have updated the printer drivers and my laptop HP dv7 Envy.  I think I checked all the settings - however, the problem persists. Any help would be appreciated.

  Hey @gmi7envy,

  Thanks for posting in the Forum from HP Support.

  I see you have a partial page printing problem when you use your HP Officejet Pro 8600 e-all-in-one printer. I want to help you with this. I have some suggestions that might help.

  I think it is a problem of software, but just in case, try to make a copy of the façade - if printing result is normal appearance, fine. If this is not the case, click here to access hardware troubleshooting tips from HP.

  Assuming you were able to make a decent copy of the façade, we will assume that your printing problems are focused on software. Accordingly, I recommend you try the following steps:

  Uninstall your printer

  • Press the Windows key + r
  • Type of control panel and press enter
  • Click on programs and features
  • Select the driver for your printer from the list, and then click on uninstall.

  Remove temporary files from your PC:

  • Press the Windows key + r
  • Type %temp%, and then press enter
  • Press Ctrl + a to select all files
  • Press Delete
  • Note that some files do not delete - do not worry, this is normal. Simply click ignore that you're prompted.
  • Empty your trash at the end.

  Download the printer Installation Wizard

  Click here to install the HP printer install wizard (instead of directly using the printer driver). When you run it, this utility will facilitate what I hope it's a smoother and more efficient printer installation.

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below and clicking 'resolved' (this will help others find the solution).

  Thanks for posting in the Forum from HP Support.

  Have a great day!

• After the restart of mac OS x lion, the scanner hp wireless officejet pro 8600 does not appear.

  The printer works properly from the computer with Wi - Fi. The copy of front button works correctly to print a copy of the document on the scanner. But when you run the HP Scan 3 application, the error message is displayed: scanner communication cannot be established. OfficeJet Pro 8600 [CDD814] is currently unavailable. Make sure that your device is turned on, check the connection and make sure that your network is working properly. If these conditions are correct, restart the device and try to scan the image. After clicking OK, the unexpected fast HP scanning error button appears. Turning then does not cause the parser should appear. Using the system preferences > Print & Scan shows the printer but does not show the scanner. By selecting the button scan in the box dialog does not reveal a scanner.  Device is only 1 month. Help!

  I have connected to the Live cat HP, which has accompanied me through the process. It turns out that I had to delete the printer, then turn off the router and the printer. Reload the drivers from the CD. Reboot the router and the printer, and then run the installation program. Seems the router, "forgotten" on my printer and scanner. Thank you, HP!

• OfficeJet Pro 8600 does not scan full page legal-size

  I have seen this question several times in these forums, but solutions do not apply to me - I can not find the applications or the settings or patches do not resolve the problem. I am running Windows 8 32-bit with a HP Officejet Pro 8600. When you scan a legal size document, the entire page is not scan, even when I select a custom size. The bottom is cut roughly where a letter size page would end.

  If you respond with a solution, please be very specific, i.e. If you say "Control Panel", you mean the control panel of Windows 8 or the small touch screen of the printer itself? If you want "pull me up to the HP application", please say that the we - there are several installed on this computer, and I've tried them all.

  

  Thanks in advance...

  In fact, the problem was located. I is broke and finally called HP support. It turns out that, contrary to the information that I have seen elsewhere, legal size paper MUST be analysed the ADF, not the dish. You can see a white band across the plateau where the search starts. The dish is physically unable to accommodate legal communication. Once the original is loaded in the ADF, the size of the document options now include legal communication.

• OfficeJet Pro 8600 is not connecting to my router from 3 BT HomeHub

  Hello

  I'll put up my new of Officejet Pro 8600 today and I was not able to get connected to my wifi router. If I try to use the wireless configuration wizard, I get an error saying that the password that I entered is incorrect (this is not - I tried several times to be sure) and I can't use the WPS connection option because this feature is currently disabled on the HomeHub 3 routers.

  Can I connect the printer directly to a computer (via USB) or router (via ethernet), but none of these options is convenient as a permanent solution, given the current provision of my home office.

  MAC filtering is not in place on the router.

  You have other options I can try to get this printer running on my home network?

  Concerning

  Sabine

  OK - got this problem 10 minutes after posting the original question. Typical!

  The solution was to connect to the main desktop via USB and then use the 'Wi - Fi connection transfer' option in the HP configuration utility.

  Concerning

  Sabine

• Google cloud print for officejet pro 8600 - could not get information at hp printer.

  I just bought a new of OfficeJet Pro 8600 today. Everything seems to work perfectly except for the Google Cloud Print connector. I can print of AirPrint, as well as e-mails to the address hpeprint.com, but when I try to record using the google site, I get the error message "could not pass information on HP printer.

  The printer is connected by ethernet wireless and it seems to work find out otherwise. I have no restrictions that can send print jobs and I changed the email address for hpeprint.com several times, as suggested in other forum threads, but it can never connect to the Cloud Print service. I'm at the level of the last firmware listed on the HP website. I tried to open the connection of several PC if several web browsers though.

  It was an important factor in the purchase of this printer. Help someone?

  OK, nothing is different tonight, but it just worked. I had just opened a chat to HP support and he gave another chance just to confirm, and I came to the page "registration successful". Prints crossed chrome without any problem. I made no changes to the printer, PC, or network. So, the best advice I can give is - it wait a few days... If all goes well, he continues to work :-)

• HP Officejet Pro 8600 - do not install scanning software

  Hello

  I bought a HP Officejet Pro 8600 more and the software in the box was for Window XP or Windows 7, I am running Windows 8.1. I tried to download the drivers from the wensite of HP, but I get an error message saying: the file is corrupted, or when I click on the e button to download nothing happens.

  I am currenlty printing using a USB cable but I need to scan documents, can you please help?

  Thank you

  Helen

  Hi, give the HP printer to try the Setup Wizard. (link)