HP Officejet Pro 8600 Premium copy Question

Similar Questions

• Cannot select tray 2 copy with Officejet Pro 8600 Premium

  Win 7, 64 bit

  OfficeJet Pro 8600 Premium

  I installed the drivers on the disk supplied in the box. (Not sure if there is a new driver or an update yet for this product.)

  I bought this printer so that I could load my UPS package labels into a bar of tasks and plain paper in the other.

  I loaded the labels into Tray 1 (according to instructions) and paper in tray 2.

  I have everything works fine except that I can't understand how to specify tray 2 as the tray to make copies of. In respect of the COPY > SETTINGS > SET SELECT only Tray 1 is displayed.

  Issues related to the:

  (1) why not tray 2 option to copy? How can I fix it? A firmware update maybe?

  (2) printing these UPS labels from tray 2 seems to work very well. Is there a reason why this would be bad?

  Thank you!

  Connected by ethernet cable, he downloaded the new version of the firmware (... 1136BR).

  That fixed it! Tray 2 is now an option under settings to copy.

  The only disappointing is that I asked about a new version of the firmware in my first question... but it took a whole week to get this resolved... and I had little to get to the answer myself!

  In any case, now it is fixed and seems to work very well.

• OfficeJet Pro 8600 Premium: When copying from the plateau the copier will print only 1/8 of page, then stop.

  Copier is towards the top sometimes & don't print that page of bucket 1/8, Athens he spits as if this one ends. Have unplugged the power cord & reconnected. Ran scans printhead & alignment. Off all night. All the ink levels are good. Still has not corrected it.

  Print an entire page of the screen of the computer without problem. Printing problem just go flat.

  Hi @Wendy-needshelp,.

  Thanks for joining the Forums of HP Support for a solution to your problem copying.

  I understand that you use a HP Officejet Pro 8600 Premium e-all-in-one with a computer and Windows 7 when you copy from sometimes flat it will only copy and print 1/8 of the page. I would like to help.

  You mentioned having unplugged and replugged the power cord. This is something that could be done. If you can, I reset the power and try to connect the printer directly to a wall outlet, if you currently use a protector or electrical surge extention. Sometimes the surge protectors can limit the amout of the power supplied to the printer.

  

  There was an update firmware released in April, which can help your printer. You can download the update of the firmware and run it from your computer to install it on the printer. You can go to the HP Officejet Pro 8600 N911g_n Firmware download page by clicking here.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Officejet Pro 8600 Premium print cover stock (67 lb) question

  HP Officejet Pro 8600 Premium

  "out of paper"

  The printer's paper. Check the paper tray and add more paper if necessary to continue printing.

  I try to print from Tray 1 cover. How to make adjustments so that it can print or is there a store bypass on this printer that I can't find.

  The sales representative told me when I bought this product I was able to print stock coverage.

  Help!

  You shouldn't have any problems with the documents in your list. You did to be sure you choose the correct paper type before printing? The product can capture not paper if the type in the tray and paper format does not match the size settings and type in the print driver. Heres how to check the paper type is defined:

  1. Return to the document that you were trying to print when the problem occurred.

• HP Officejet Pro 8600 Premium ADF analysis convex/Fisheye results

  Not only do I have to deal with random vertical lines on the digitization of documents in format pdf, I was out buying this AIO believing that I will be able to scan above 300 DPI using the ADF. Why is this NOT advertised? I also notice that the ADF scan results are tilted, so I have to manually turn the resulting page (and this always leads to fuzzy edges because of anti-aliasing). I read where the use of the 'PDF' indexable parameter will straighten the scans, but the text is rendered evil and statements blurred and faded. Other than that, the real printer/copier works great; the part of scan is terrible (and that was the only reason I bought this printer).

  Now, my current complaint is when you scan a document with horizontal lines, these lines are not only not right, they are curved (like a fisheye effect or the lines are convex in shape). I tested several ways; I open the pdf file with Photoshop and after recovery of the document, I use the tool rule to mark both ends of the line. When I look at the center of the line, it is not in accordance with either of the end points. It's like the center of the page was pushed toward the inside of the lines causing a bit for not being straight.

  Everyone has noticed this or know what I can do to fix this? It seems that this printer has many problems with scanning.

  Hello Shan-Dysigns,

  It seems that you have many questions related scanning with your HP Officejet Pro 8600 Premium, they will have vertical lines, jump of twisted lines are curved, etc..

  This document from HP: vertical stripes, lines or streaks in the Copies, faxes or Scans mainly covers the vertical lines and food issues.

  To seek to solve looks curved to the scans, just appear like that during the ADF or flat glass in this way as well?

  I would like to allows you to check the updates of the firmware of the printer: get the latest Firmware and updates, so please make sure the printer is connected directly to a wall outlet: questions when it is connected to an uninterruptible power supply/Strip/surge protector power should help explain why.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 for all other regions, click here.

  Kind regards

• 4.3 "touchscreen of the Officejet Pro 8600 Premium could be established in the Spanish language? Help me!

  I just sent an e-mail to HP support, but unfortunately they never told me anything. I need to buy a printer for trade muy and I would like to acquire the Officejet Pro 8600 Premium, but I don't know if his screen 4.3 "touchscreen could be implemented in the Spanish language. So my question is: can the Officejet Pro 8600 Premium touch screen set up in the Spanish language? Please, ¡Anyone help me!

  Yes, you can.

  The 8600 Officejet Pro may be installed in different languages.

  I provide and example of this:

  • 
  • This screenshot is when you select the paper size for copying:

  And another example:

  • 
  • It is the main window of the façade.

  * Don't forget to click on the stars KUDOS say thank you

  * also click on the Solution button if your question is answered.

• HP Officejet Pro 8600 Premium - black line on pages that pass through the document feeder

  Hello! I have a HP Officejet Pro 8600 Premium. Any time that I scan, fax or copy via the document feeder a black line appears on the document created. Anyone know how to fix this?

  Thank you in advance,

  Lynn

  Hello Lynn_Fritschi.

  I see that you encounter errors of quality on your prints when you use the Officejet Pro 8600.

  Here are two links that should be useful for you. The first is to support your product page and the second is a document that explains errors output quality and the ways to solve them.

  HP Officejet Pro 8600 Support

  Vertical stripes, lines or streaks on Copies, faxes or scan

  Please let me know if they help you.

  -Chauntain

• HP Officejet Pro 8600 Premium: Printer remains offline after standing start

  HP Officejet Pro 8600 Premium takes 30 minutes + to connect after boot or restart computer?

  Also when starting printer error message - cannot send faxes? (Fax complete info)

  It is a wireless setup. Phone line is AT & T U-Verse.

  Hi bunkyb43 ,

  Welcome to the HP Forums.

  I see that the printer takes a while to connect to the printer once the computer has been restarted or powered.

  I've seen this problem before and I could solve the problem by simply ensuring that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  Once the printer is connected to the wall outlet, please use the power button to do a proper feeding cycle.  This will make a semi be able to reset the printer.

  I'll also give you a document ensuring that the fax settings are correct. Please click the link for "Cannot send or receive faxes".

  Write me back if you have any questions or concerns.

  See you soon,.

• HP Officejet Pro 8600 Premium: OfficeJet Pro 8600 Premium - cannot use Gigabit Wireless N

  My OfficeJet Pro 8600 Premium only connect to my router using Wireless G even though my router is capable of Wireless-N. I connect 2.4 GHz, and all my other devices connect to my router using Wireless N without problem. This printer's specifications indicate that it is able to use N Wireless 2.4 GHz. How can I get the printer to connect to my router using Wireless N? Thank you!

  Reset the printer to the default network. Reset your router failing factory. Reconfigure your router back to your configuration. Now try to connect using WA2 - AES encryption to your SSID.

• 6 "x 9" envelopes with officejet pro 8600 premium

  I try to print 6 "x 9" envelopes of greeting cards on my new officejet pro 8600 premium and get error message paper size mismatch. " With my old photosmart printer I was able to create a custom size envelop for this problem. But this option is not available on my new and better printer. Any ideas?

  Hi garyaw2,

  Try adding your old printer driver for JO 8600 and try to print, please follow the steps below to add a printer.

  Start > devices and printer > add a printer (available on top) > select Add a local printer (NO other options) > select Create New Port > port TCP\IP Standard select > next > enter IP address of JO 8600 (can be found by selecting the option Wireless on the front panel of the printer) > following > Select manufacturer such as HP or Hewlett-Packard and under printer select your old c309 printer and complete the wizard.

  Try to print again with prinetr selected c309.

• HP Officejet Pro 8600 Premium: HP Officejet Pro 8600 Premium e-All-in-One - N911n

  My HP Officejet Pro 8600 Premium has worked great for years, but now the problem is that then adaptation pages in black ink in the table, the copies are exposed and too slightly inked to read.

  Printing is perfect in black and color of the computer.

  The probem has to do with the top of the table side only.

  Can anyone help with a solution?

  Thank you

  4TT

  Thanks to Mitch to HP technical support;

  Solution was to turn off the device, then reconnect.

  Yesterdays failure tempary must have played with the internal settings.

  Works great once again,

  Thank you

  4TT

• HP officejet pro 8600 Premium: HP officejet pro 8600 optimal N911n-no interface to computer with win10 installed

  Hello I have a HP officejet pro 8600 premium tto e-all-in-one-N911n printer connected to a Lenovo desktop computer. I recently updated my computer from Win8.1 to Win10. I have tried to find drivers and updated the printer software for my printer. Currently, my printer will not run any computer to printer functions because I can't establish any interface between these two products. If anyone knows when there will be an update of the printer software match Win10, please inform Mr. thank you.

  Uninstall the printer and download the complete functionality for your operating system software

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8600-e-all-in-one-printer-series---N9/4322916/model/4323651#Z7_3054ICK0KGTE30AQO5O3KA30R1

• OfficeJet Pro 8600 Premium: HP OfficeJet Pro 8600 Premium does not print Windows with Word 2016 10 envelopes

  After that I have upgraded to Windows 10 and Word 2016, envelope and label printing feature would no longer work on all-in-one printer, HP OfficeJet Pro 8600 Premium.  Please provide any possible solution.

  Hi @dshirley22,

  Thanks for the response back.

  I would at this point uninstall all previously installed printer software. If you need assistance, here is a document that can help - uninstalling the software of the printer (Windows).

  Once the software is uninstalled, use the HP printer installation wizard to help install the software. This tool will search and find the version of the drivers and the printer software up-to-date.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• hp officejet pro 8600 premium

  Hp officejet pro 8600 premium allows to print without the lower plate? I want to buy the premium because of the extra ink & OCR software, but the additional target makes the printer higher than I can use.

  Welcome to the forums @conradnonnon

  I understand that you are curious to see if the premium 8600 Officejet prints without the lower plate. Well, you're lucky because the 8600 Officejet Plus is the same that the premium, the exception has no additional substantive IBC.

  Here are the specs for you to see: JO 8600 more - product information

  I hope that clears up your concern!

  Have a great Monday

• HP Officejet Pro 8600 Premium: Tray Lock worked until the upgrade of Windows 10

  Since a year now, I have 1 locked drawer for our book of receipt only, easier than all the other printing set to automatically select the default tray to tray 2 (Tray 1 is locked and all)! But I tried the upgrade of Windows 10, that was an epic fail and my cpomputer was sent to the doctor for the day. When I came back I had to basically start over with a new computer. I have everything back to be better than before, but THIS problem! Receipts in Tray 1 and my payment software its configured for Tray 1 specifically for receipts. All other default things that select and always tray 2. I can't anything out of tray 1. HOWEVER, my boss's computer is on a network with it and when it prints a receipt from his computer he properly dispences Tray 1. Yet.

  Help! PLEASE, I BEG YOU!

  Lacey!

  Hi @L2thaJ,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print correctly on tray 1 on your HP Officejet Pro 8600 Premium e-all-in-one printer. I will definitely do my best to help you.

  Is the other computer Windows 10 institutions, who works for printing on tray 1?

  It looks like Windows 10 and the software you are using does not work with the printer driver, what might happen.

  You are able to print to Tray 1, when printing from MS Word or Notepad?

  Please ensure that you use the latest printer driver for your printer.

  Download and run The printer Installation Wizard. The HP printer installation wizard detects automatically the best print available for your HP printer driver. It is only available for Windows 7, 8 and 10.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!