HP officejet pro L 7680 All in: hp L7680 scanning problem

Similar Questions

• cant WiFi connection HP Officejet Pro 8600 e-all-in-one printer to internet

  I can't get WiFi HP Officejet Pro 8600 e-all-in-one printer connect to internet... at least I think that's the problem. I followed all the instructions on the HP print and Scan doctor as well as solve problems of failure to install HP. My router is working fine for everything else and I entered the router the static address for the printer.  It seems that my printer thinks it's connected to my WiFi (Ihave WPS it several times), but when I type there nothing appears in my IE IP address. My router does not see the printer either. I have the latest driver installed on my computer. I suspect that this may be a router problem: new Asus Double 450 Mbps N Router router (dual - band, but it appears my router uses the 2.4 Hz band to connect with WPS). Windows 7 64.

  Any help is appreciated!

  Hello NRHII,

  Welcome to the HP Forums!

  I understand that you are unable to connect the Officejet 8600 via a wireless connection. I will do my best to help you! I would recommend power cycling the router, the printer and the computer:

  (1) turn off your printer
  (2) unplug the power cord at the back of the router
  (3) restart your computer
  (4) wait less than 60 seconds, reconnect the power cord to the router
  (5) turn the printer, wait for the computer to turn on

  The wireless light blinking on your printer? If so, please reconnect the wireless on your printer using the Wireless Setup Wizard: (this information is declared here.)

  1. On the touch screen of the printer, press the right arrow key ( ) to display the second navigation screen.
  2. Tap the Installer icon ( ).
  3. Tap network , tap the wireless configuration wizard , and then press continue . The printer looking for available networks.
  4. Tap the name of your network and then press OK .
  5. If you are prompted, enter the password for the network, and then press OK . The printer connects to the network.

• HP Officejet Pro 8600 e-all-in-one printer - N911a (cannot control the size of the item being analyzed).

  Hi all

  HP Officejet Pro 8600 e-all-in-one printer-N911a, XP operating system. It's all new today and I'm very aware of this new stuff. (I'm older)

  My old Scanner from HP (HP Scanjet G 4010) let me resize my photos or obituaries that I put in a genealogy program. When you try to analyze recent articles in my program, in that I have a small image to the left of the page with the rest of a page 8 x 11 white.

  Is it possible to implement on this 8600 or am I missing something?  Any help or ideas appreciated.

  Thank you

  Glen

  Hi oorwill44,

  Welcome to the Forums of HP Support! I understand that you are not able to control the size of the scan, you make your HP Officejet Pro 8600. How did you install the software for your computer that is running Windows XP? How do you scan, you scan the front of the printer, or you use the HP software on the computer?

  Please take a look here: how Scan: Windows XP

  I hope this helps, let me know if you have any questions.

  Thank you

• HP Officejet PRO x 64-o: I have a? on the screen, it is a HP Officejet PRO x 64 all in one

  I have a? on the screen, it is a HP Officejet PRO x 64 all in one

  THANK YOU FOR YOUR HELP: THE PRINTER MODEL # IS SNPRC-1401-02

  AND THANK YOU FOR YOUR TIME!

• HP Officejet Pro 8620 e-all-in-one printer windows 8

  Printer e-all-in-one-HP Officejet Pro 8620 Windows 8.

  wireless printer is. printing from iphone is OK

  Since my PC win 8 not sending a file to filesgo-printer - printer not respongding - no message.

  I have install new printer 8620 on 8600 series of drivers printer or printing only from my PC

  How can I fix the thanks of printing problems

  Hi @yosiwajcenberg , welcome to the forums there.

  I read your post on your Officejet 8620 do not print for you, on your system Windows 8. I suggest you try the following steps.

  1. go to your control panel and uninstall your printer.
  2. hold your key to Windows and the R key on your keyboard to invite the run dialogue box.
  3. Type "coil" and press enter or click OK.
  4. Select and open the drivers folder, select the x 64 folder if you have a 64-bit operating system or the w32x86 if you have a 32-bit operating system.
  5 open the 3 folder, locate the HPBXPSRENDER. DLL file and rename it to HPBXPSRENDER. OLD
  6 reinstall the printer: HP Officejet Pro 8620 e-all-in-One Printer series full feature software and drivers

  I hope that helps!

  Have a nice day

• OfficeJet Pro 8500 Wireless all-in-One Printer - A909g User guides

  Can you send a fax from a PC to an Officejet Pro 8500 Wireless all-in-One printer when connected wireless?

  Hello dhe8011,

  Welcome to the HP Forums!

  I understand that you would like to know if you can send faxes from your computer. Yes, you are able to perform this function, but must be in place. What is your operating system on your computer? Click here to read: Windows.

  Please follow this entire document from HP on the sending of a Fax from your PC (Windows 7 or Windows Vista).

  Let me know if this document solved your problem or not.

  Impatience on your part.

• HP Officejet Pro 8610: Problems for install HP Officejet Pro 8610 e-all-in-one printer on Windows 10

  We have a HP Officejet Pro 8610 e-all-in-one printer that is connected to the network.

  The printer is installed and can print successfully from 3 desktop with Windows OS 10.

  4 desktop pc with Windows 10 is not able to install the printer drivers.

  When addind printer with device to add the printer is recognized and installed, but only the driver scanner.

  We have tried to remove the printer some time but without success.

  Also, we tried using various HP and Assistant tools, but these tools can not install the printer driver.

  Adding the printer manual, also don't do not install us the printer driver.

  The only driver installed is the scanner.

  We are out of ideas, you can help us with all the great ideas.

  Sincerely,.

  Gilbert

  Hello

  I'm glad to hear that your problem is solved and everything works fine now.

  Good day!

• HP Officejet Pro 8620 e - All - in: printer Squeak e-all-in-one-HP Officejet Pro 8620

  Just bought a HP Officejet Pro 8620 e-all-in-one printer

  Model A7F65A, 13 days ago. I him have not used too, and

  It is already squeaking when I scan the pages from the top loading.

  Not sure if there is a simple solution or if I should return it?

  Any suggestions?

  Scott Faver

  Hi @ScottFaver

  I have thing for that matter, it would be better for you to call us. If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

  I hope this helps.

• Printing DCP color red problem - HP Officejet Pro 8500 Wireless All - in - One Printer, the 4th copy

  I have a HP HP Officejet Pro 8500 Wireless all-in-One Printer and try to print 75 copies of a program for our event. After the first 5-6 pages the RED in my program starts to turn magenta. I have new HP ink cartridges and print on HP Color Injet paper. I have renectly replaced the Black/Yellow Printhead (at least 6 months ago). At the beginning when I cleaned the printheads, I was able to print 2 or 3 pages showing my color RED. Then back to magenta. When I received the images of test after you have cleaned the print heads, they are all perfect, no lines.

  What happens and how can I solve this problem?

  Hi TM1997,

  Thanks for the reply!

  Given that the printer seems to work for a bit and then comes back to the same question, it must be a problem with the printhead (Cyan/Magenta one) or the ink lines that go from the cartridges to print heads. First of all, I would suggest that you check the warranty date on your printhead C/M. If it is under warranty contact HP Technical Support in your area and inquire about a replacement, but if not, it's you if you want to replace the print head, printer service, or look into an upgrade.

  Have a great weekend!

• HP Officejet Pro 8610 e-All-in: no internet connection

  Hello

  I bought just for HP Officejet Pro 8610 e-all-in-one printer and did the whole upward according to the instructions. everything is fine except for the fact that the printer does not connect to the internet. Although I had no problem to being of network discovery and connection for some reason when I'm checking updates, that it is said that the printer does not have to connect to the internet. I tried ethernet also and always had the same questions.

  any advise will be greatly appreciated.

  PS: all other devices on the network have any connecton from Internet, only the printer

  Hello Evan_,

  Welcome to the Forums of HP Support!

  I see you are having some problems with the Officejet 8610 Internet connection, I would like to see if I can help. Please try to apply a manual IP and DNS to the printer. You can learn to do it by following the steps here: HP Officejet Pro 8610, 8620, 8630, 8640 and 8660 e - all-in - One Printer Series - printer does not maintain the wireless connection, three Solution.

  After you apply the INVESTIGATION period, defining the DNS is done after on the same screen. Use these information for DNS: 8.8.8.8 & 8.8.4.4

  Good luck and let me know the out come.

• Sending faxes/install of the HP Officejet Pro 8500 Wireless all-in-One

  I'm on a po to buy this printer but have a question that I can't find an answer for without having to buy the printer. I have no Modem built into my PC.

  I am wanting to know:

  What I have a fax modem from my PC

  An external USB Modem will work

  To really stretch the question, how the external modem will connect to the all-in-one

  The all-in-one has a fax for stand-alone fax functionality.

  If anyone knows these answers I would appreciate a response. HP Officejet Pro 8500 Wireless all-in-one is on currently on sale $ 150 off and I would like to grab one before the end of the sale.

  Thank you very much

  Jerry

  When I talked to my PC manufacturer, I discovered that you can't do what I wanted to do, modem or not, since the PC Fax documents

  You can mark this question as answered and thanks for the help.

  Jerry

• HP Officejet Pro L7650: PCL 6 driver for HP Officejet Pro L7650 printer all in one

  I have an old HP Officejet Pro L7650 all in one and due to new software that I use for my small business, I was told that I must download PCL6/drivers for my printer to work with the new software correctly. I searched and found the right driver online and downloaded, however, during installation to choose the machine and it lists just about everyone but the machines HP Officejet Pro L7650. I was wondering if anyone has an idea or knows a PCL 6 driver that will work for my particular all in one machine. Any help is appreciated. The driver I downloaded was the HP Universal print for 64-bit systems driver specifically (upd-pcl6 - x 64 - 6.0.0.18849). Thank you.

  According to the specifications of the charges (see http://support.hp.com/gb-en/document/c00839084 ) and in common with many (but not all) peripheral inket printers OfficeJet L7650 use the Language of Description of Page PCL3 Enhanced - they do not support PCL5 or PCL6.

• OfficeJet Pro 8600 e-all in one; "Center of HP, print Web Solutions, etc. have not installed.

  Windows 7; Wireless network; Today, I installed my new e-all-in-one Officejet Pro 8600 wireless printer. When finished, I was able to print, I have created e-print, and the scanner works, but did not find what was once called the "Solutions Center HP" that I could click on choose scanning, check the ink supply, get 'Help' and so on.  A HP 8600 printer icon installed on the desktop, but when I clicked it, it was just a bunch of meaningless jibberish, but had no function. I went to 'Start', then HP and was able to somehow make a "Scan icon" to open.  I don't have the ability to implement "WEBPRINT", nor REGISTER MY PRODUCT and so on. In other words, the installation has not finished. I tried putting the CD back in, but no additional options were available except to reconfigure them, etc.  Thank you for your help.

  PM sent on washer

• OfficeJet Pro 8620:8620 all in one printer color printing incorrect, even if the quality is good on tests

  My printer is only about a year and I had no problem with him until more recently. I only use hp ink cartridges. It prints color orange when I want to print the colors pink and Red/pink when I want to print Brown. Most of the other colors print normally. I cleaned the print head, which does not help at all and made a print quality test, each test to come out totally fine. Colors are not dimmed, there are no missing lines or anything like that, it's just printing wrong colors from time to time, as on some documents. Any suggestions?

  Hi @mcorinn,

  Welcome to the Forums of HP Support!

  I see that you experience problems printing some documents with your HP Officejet Pro 8620 printer in Mac OS X 10.6. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you feel. There could be corruption in the files/application on the Mac or a problem with the printer driver. If the 'print quality test' report print correctly, this is not a hardware problem.

  Are you able to print from TextEdit? What were the results?

  If some documents are the problem, they could be corrupted.

  What application you are printing from?

  Try to create a new document with the color to see if it prints correctly. What were the results?

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• OfficeJet Pro L7580 printer all in one

  I recently downloaded the HP Officejet Pro full features (Version 14.0.0) software to my computer HP windows Vista (32 bit) and now I'm my files scanned problems - they disappear after scanning with the HP Solution Center that is installed with the new software.  I have read several posts and tried their solutions but also download all the patches available on the HP website, but whenever I try to install the patch I get a box pop up that tells me that I have not all installed components that need the fix.

  Does anyone know a solution to the 14 software version?

  Hello

  Please try follows him and check any changes:

  1. Make sure that the HP Solution Center is closed.
  2. Enter C:\Program HP Imaging\bin and locate the file hpqxmlul.dll .
  3. Move this file to a temporary folder elsewhere as your office, just to backup porpuses.
  4. Download and save the following file to your desktop, remove it by double-clicking, a new hpqxmlul.dll file appears on your desktop.
  5. Move this file into C:\Program HP Imaging\bin.

  Now, launch the HP Solution Center and try scanning.

  Please let me know of any changes,

  Shlomi