HP Officejet Pro L7400: Problem is wireless to work

Similar Questions

• HP Officejet Pro 8620: HP Officejet Pro 8620 - problem with wireless connection w/computer

  Hi all

  I recently bought the HP Officejet Pro 8620 and I have problems connecting with my computer.

  I used the Setup Wizard to connect the printer to the wireless network of my University, and when it's over, the blue light of connectivity remains a solid blue and the screen says it is connected, which is great. However, when I use the HP Officejet Pro 8620/software of connection instillation, I always get the message,

  "-L' the entered IP address is either incorrect, or it is another wireless network that has the same name as your network." Please ensure that your printer has this IP or enter the correct address below and click on search. Also, confirm that you wireless network is unique. »

  I did somehow on the printer IP address is copied 100% exactly the same with the points and the message still appears and my printer is unable to connect with my computer. As another option, it says that I can use the host name to find the printer as well. However, the same thing happens. I'll type in the name of host by number and letter by letter, and again, it does not find my printer. In addition, there is only 1 network name so I know I hit the right one. Being a student, it is very important that I get things printed off the coast, it is essential for me to solve this problem. Also, I spent a lot of money on it so I need to work properly.

  It should be easy to communicate that it gives me all the necessary information right in front of me, but as I said, it was not easy or fun experience. I don't really know how IP work addresses but I tried to use all the only thing that I can find that is relevant. From now on, I have to record everything in PDF format on my computer, send me unwanted, printing documents download them on my Galaxy Note 4, connect my phone to the printer using the wireless HP Direct on the Officejet and then finally I can print my things. Yes, it works like this, but it is also a concern and I shouldn't do that. I realize that I can't buy a USB link cable to connect my printer to my computer but I don't want to ride the 2 every time I want to print.

  (Also something to note, since I'm on WiFi from the University, I don't have access to the router of course so I don't know if this is a contributing factor in why things do not work).

  If anyone has suggestions/advice/answers on the issue, please let me know. Thank you!

  Hello @Plz_Help.

  Welcome to the Forums of HP's Support. I understand that you have a problem connecting to your computer and your printer via Wifi from the University. I would like to help.

  The only thing that really POPs, is that you use the network of universities. This can cause a lot of problems.

  Question: When you connect your computer or Note 4 on the network, should a pop-up saying you accept the terms of service? If so, this would prevent an air of challenge the printer properly connected to the network.

  If you had access to the router I would recommend checking the network connection by typing the printers IP address in a web browser. If you can access the printers webserver shipped, then, the connection is fine. If you can't you need to reset the router. Of course, you can do this.

  Also, here's something to consider: If the printer successfully on the network, everyone else on the network will have access to your printer.

  A USB connection will be the most reliable and safe way to go. Another thing, why send your rating 4 print jobs? Why not save the PDF files and connect the computer to the wireless network direct printers? In this way, you can print from your computer.

  Sorry I can't give you a solution ' to do this and it will work. You must convince the universities IT department to get things related.

• HP Officejet Pro 8600 more N911g wireless, no work of scanning

  Wireless, no work of scanning

  Hello

  I suggest you uninstall / reinstall your printer using the Windows 7 most recent drivers that are available on the HP site for your printer model.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4323648&LC=en&cc=us&DLC=en&lang=en&cc=us

  And also use the troubleshooting TAB steps there, too.

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• OfficeJet Pro 6830: Problem with multiple Pages into one file

  I just bought an OfficeJet Pro 6830 problem and have the scanning of several pages in a PDF document.

  I checked and the box advanced settings/file/create a separate file for each page is disabled, but it will not always combine pages.  Registration prompt window upward after finishing first scan.

  Previously I use Desktop 4580 without any problems and the file to automatically create the folder of the current month in Myscan and analysis enable the scan file be save.  It seems that this function was also missing.

  Please advise.  Thank you.

  Hello

  Scan you from the glass flat or the top of the charger page?

  If you use the charger to top of the page, the pages must be taken and analyzed before the scan to finish.

  If you use glass, ensure that the box show the display after scanning is enabled and press scan, click on the button "+" under the preview of scanning to scan the next prior pages by clicking Save.

• HP Officejet Pro 6230: HP Officejet Pro 6230 problem

  My officejet pro 6230 has all the lights above the ink colors flashes way slowly from left to right. The printer will not connect to our wireless network and is not recognized by the computer. This all happened after the replacement of all the ink cartridges. Any help would be greatly appreciated. Thank you

  Hi user,

  It seems that your print head problem.

  HP released the document for that matter. Please follow the document to solve the problem.

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6230-ePrinter-series/5390318/model/5390319/document/c04839288/

  Hope this will help solve the problem.

• OfficeJet Pro 862: Officejet Pro 8625 not print wireless

  Printer worked and printed wireless for a few months and then all of a sudden it stopped being able to print wireless.

  Everything seems correct, wireless connection, print test paper, etc.

  But when I print a word file of MS office since T430 victory 8.1 portable, the printing pool show status 'Impression' and then disappeared. In the Officejet 8625 Panel, there is a "Print report" message flashed in very shot time. Then nothing happans.

  I tried to reinstall the printer, use the HP printer help and HP print and Scan doctor, even check the status of the printer in Web Serive printer, everything looks Ok. In the embedded Web server, tools-> Magagement job-> Job Monitor, the stutas of work says 'done '.

  Any ideas on how to solve this problem?

  Hey @ziyoo,

  Welcome to the Forums of HP Support!

  I would like to help you to solve the problem that you are experiencing when you try to print from your computer Windows 8.1 wireless to your HP Officejet Pro 8625 e-all-in-one printer today. Thank you for all the troubleshooting steps you tried before reaching out for support. Right now, I don't think the wireless printing problem that you are experiencing is caused by your printer or your network connection. On the contrary, I believe that the wireless printing problem is caused by your operating system.

  Recently, Microsoft has released a hotfix to correct network printing issues in their Windows 8 and Windows 8.1 operating systems. These wireless printing problems consist of 'partial printing' and questions 'offline '. The questions seem to affect several brands and models of wireless printers. Can I have it please click here to download the fix. Once the site opens, please click on the available hotfix downloadbutton. Please follow the prompts on the screen to install the hotfix. Once the hotfix has been installed please try again to print.  If printing still does not work you need to restart your computer to allow the Hot Fix to take affect. Once your computer turns please try again to print.

  Please reply to this message with the result of your troubleshooting. Good luck!

• OfficeJet Pro 8500 a: printer no longer works after reset wireless network

  OfficeJet Pro 8500 has, MacBook Pro, running the Mavericks.

  For 3 days, when we added a password and blocked our router wireless (modem ATT UVerse), our printer is "offline" print jobs queued, but do not print.  When I go and check it says "printer offline".  Or in the print queue, it is something like "looking for printer."

  He worked briefly when we found a power cord and plugged into the laptop, but will not work wireless, which he did before.    No changes except to repeat password for the network.

  I have the manual and you have turned off everything, then return in the order recommended (router, printer, then laptop).  Always offline.   Can someone please?   Thank you!

  Hello @LindaGrace,

  Welcome to the Forums of HP Support!

  I understand that since to add a password to your wireless router your HP Officejet Pro 8500 has e-All-in-One Printer not communicate wirelessly with your computer Mac OS X 10.9. I would like to help you today with this problem of wireless communication.

  Now, make a change to your network, as an addition to a password or change a password, translates into having to reconfigure your printer on the wireless network. At this point your printer is to be 'blocked' access to your network wireless because of the change you made. To correct this problem, you simply raise the Setup wireless for your printer to "say" the printer network name and password. Once the wireless installation runs successfully all will continue to work for you according to the normal.

  To run the Wireless Setup Wizard on your printer, please follow the steps below.

  1. On the touch screen of the printer, press the right arrow key () to display the second navigation screen.
  2. Press network () to open the network Menu.
  3. Touch Wireless.
  4. Press the Wireless Setup Wizard, and then press continue.
  5. Please wait while the printer is looking for the routers that are nearby. Appears in the menu Select Network (SSID) .
  6. Scroll the list of network names until you find the name of your network.
  7. Tap the name of your network.
  8. If you are prompted, enter the WEP or WPA key. This is the password for your wireless network. The password is case-sensitive.
  9. Wait for the printer to connect to the network

  -Source

  Once your printer is connected to your network again, please try to print. If printing still fails, you need to add the printer to your Mac because of the connection of network new printers. Please follow the steps below to add the printer to the Mac.

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scanand then check if the name of your printer appears in the printer list.

  3. If your printer is already listed, remove and re-add the printer to check the communication with the Mac. Click on the name of your printer, click the minus sign (), and then delete the printer

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer

  5. click Add to add the printer to the list.

  Now that the printer is properly configured on your network and added to the Mac, please try again to print wireless.

  Please reply to this message with the result of your troubleshooting. Good luck!

• OfficeJet Pro 8100: Problem with airprint

  Our printer is officejet pro 8100. My iOS is 9.3.2 but not sure about the version of the printer. The first time we buy there worked with Apple airprint. Lately, we can't use airprint more which is very uncomfortable. EPrint still works well, however, we do not normally use it. We tried all possible solutions. The device can see the printer but when we choose the printer it disappears from the list. What should we do?

  Hello @Penny3425,

  Thanks for dropping by the HP's Support Forums! I see that you can not use AirPrint with your HP Officejet 8100. You are still able to use the ePrint feature.

  I would like that you start here: Wireless Printing with Apple's AirPrint

  Please see the 'No Printers Found Air' section and make sure that no troubleshooting steps were missed.

  This aid?  You are now able to use the AirPrint feature. I'll watch for your reply.

  Let me know the results. If this resolves the problem please let others know to mark this message as "accept as Solution".  Just say thank you, please click the ' Thumbs Up ' button. If you need more assistance let me know and I will gladly do whatever I can to help.

• Can you simultaneously connect Officejet Pro 8600 wired or wireless?

  I currently have an Officejet Pro 8600 printer and it worked flawlessly when connected wireless over the last few months until yesterday, when all of a sudden could not be connected to my office.  (Note: my wife's cell phone still print on it without problem).  I'm going down in support information in an attempt to return to its former State, running via the wireless, but I was wondering if this printer can be connected both cables (on the desktop) AND wireless (for laptop) at the same time?  If so, how is this dual connection method performed?  Thank you.

  Thanks for your help Jamieson. This perfectl worked.

• Windows Vista 7 and HP Officejet Pro 8500 A910 connected wireless but does not properly

  I just moved in with roommate and wireless to connect to Windows Vista 7 with HP Officejet Pro 8500 A910... when I select print test page or a document to print, the printer and the computer are connected and respond, but instead of the test page or document the printer starts printing of dozens of pages of AI computer jargin: % BeginProlog %. : file Pscript_WinNT_ErrorHandler 5.0 0/currentpacking where{pop/oldpack...etc etc... This jargin continues for more than several pages. Anyone know what is the problem and how to fix?   Thank you, cropcircleguy

  Hello

  Please visit the link below to fix the problem.

  http://whp-Java.extweb.HP.com/ewfrf/wc/document?DocName=c01954177&LC=en&cc=us&DLC=en

• OfficeJet Pro 8610 cannot connect wireless

  I have an Officejet Pro 8610 (CN41JB30XY)

  IM using a laptop from Samsung (NP510RSE) running Windows 8.1 x 64

  The printer sets up a operates fine USB

  When I run the installation of the software and that you are trying to set up a Wi - Fi connection it fails

  There is no error message is not very well the printer

  Have disabled Norton and the Firewall window - no help

  Started in safe mode with network - no help

  Ran msconfig and doesn't make a start limited - no help

  I'm on a private infrastructure network and connect to the IP 192.168.0.149

  The guys that I beat my brain for a week, your help will be aprecitated

  Note: I do not have a router am on a WIFI network

  Hi @Phil_Ramsey,.

  By your post, I see that you cannot set up the printer on the wireless network. I can help you with this.

  Please provide more information on the configuration of your network. Given that you do not use a router.

  In the meantime, follow the steps described in this document for the wireless printing Center.

  Select your printer never worked on the network.

  When you run the Wireless Setup Wizard on the printer is not automatically find the network and automatically provide a static IP address or will you set a static IP address? (which could be the problem)

  You can test the printer?

  Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run,.

  Make sure they are on the same subnet mask.

  Type cmd and then type ipconfig.
  Check the IP address of the computer and the subnet mask.
  Now, check the IP address of the printer.
  Do the first 3 sets of numbers match?

  Try and ping the printer.

  In the same window, type ping printers (space between ping and IP address) IP address
  What are the results?

   

• OfficeJet Pro 8600 N911A: fax wireless

  I need to be able to SEND faxes.  Is it possible to configure my Fax on my Wireless HP Officejet Pro 8600 model N911A?

  Welcome to the community of HP @BARBEO,

  I understand that you are looking to set up your HP Officejet Pro 8600 fax functionality. I'll be happy to help you.

  It is possible to configure your HP Officejet Pro 8600 to fax, however, fax can be used through your wireless network, so the printer will be connected with a telephone cord. Below, I've posted a link to a document that has some instructions on how to configure the functionality of your HP Officejet Pro 8600 fax. Please try all the steps in order and get back to me with the results.

  HP Officejet Pro 251dw, 276dw, and printers of the 8600 series - set up the all-in-one to send and receive faxes

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• OfficeJet Pro 8600 loses the wireless connection

  I have a 8600 OfficeJet Pro (n911a), which has lost its connection with the PC. The computer is running Windows 7 (64) and work very well for several months. Recently, when you try to print, the following message is displayed. I did several searches on the web and found that this has been a problem in class, but no clear solution. The only thing I tried was changing layout alarm ink 'always' to 'then of printing"that someone has suggested, but that did not help. Other bids I found indictate that this problem occurs when the printer is idle for a few hours, but restart it restores. This isn't the case here. The following error message:

  

  Any advice/suggestions/etc are welcome. Thank you in advance.

  Well, the problem was solved by uninstalling the software, and then reinstall the latest version of HP.

  The only reason why that I did not it was in the first place because many comments I've seen on this issue before said they had already tried that and it didn't work. So, I didn't see no reason to waste my time trying something that might take a lot of time with little chance of success. However, the printer in question was still under warranty, so I was able to communicate directly with HP and it's what they me ultimately do. I was online with them for nearly 90 minutes to try other things first, but this is what worked in the end.

  If you decide to try it yourself, I would say that you do not forget to completely uninstall the current version first. The tech. I chatted with told me that it would be unnecessary, but do not do so caused several other problems. I finally had to do a system restore, and then try again until it would work.

  So far so good.

• OfficeJet Pro 8620: problem with ink

  Hello. I have nothing else to the HP printers used in my life using the computer - more than 25 years! I bought a new Officejet Pro 8620 2 years. I also bought cartridges refilled at the same time as my father died and I would need to use the printer a lot. Unfortunately, I bought ink another 3 times for this printer, when printing somewhere near 100 pages ALTOGETHER since the purchase. Problem is the printer keeps saying cartridge is not HP and damaged - should replace the HP cartridges. I've NEVER had a problem before using reloaded cartridges. Why change now? Am very close to get back to using my old computer Win XP and more old HP all-in-one printer. I have 3, and none of them has NEVER given any problems.

  Looking for help on this. Have always had confidence in HP before - don't want to lose that now. Last cartridges were new HP, but still having the same problems. Suppliers of ink have been highly evaluated with excellent reviews. Warranty expired a year ago. Haven't had extended warranty because, as I said, never had a problem with HP printers to more than 25 years.

  In addition, cellular internet very limited - and not (!) reliable. 50 miles of the city.

  Yes, I learned a LOT over the weekend. First of all, I ordered a few inkplicity.com ink. Am curious about their ink, with their 1 year warranty. Shortly after ordering, I contacted Fuzoo, who then asked me to photograph both sides of the chip. I had no idea of the chip was removable. And actually, I see on the YoYoInk cartridges that the chip is glued in place. Then, I saw a few chips ink auto reset for sale online. And then began to find a lot of links and messages and articles on the chips of HP and the problems associated with them. Like my old printers were about 2000 or so, I had never met the problems associated with the current chips.

  Now, Fuzoo has graciously agreed to replace not only the Magenta faulty cartridge (which has their 'old' piece), but will send a full order before, which was black (2) and a set of color inks. Can't get much better than this! So it would seem that I'm no longer need an explanation of why this happens - it's all about HP and their need to force their customers (who FREELY CHOOSE to buy their printers) in the purchase of HP ONLY cartridges.

  It is a free country that is stuffed with capitalism. You'd be hard-pressed to get into any grocery store and NO search of generic items just alongside their counterparts in brand and usually for less money. You have car trouble? Generic (non - OEM) parts are available, as well as a lot of rooms refurbished. HP should remember their place in the grand scheme of things, or they will go the way of many other electronics companies. Trying to force customers to pay more for ink is bad. ... So this would increase the cost of the printers in the first place? Yes, probably. I was always ready to buy quality products when I could afford to, and HP printers had always been reliable but also easy to use. With this printer, I swore to the dang thing a lot more that I used it.

  Please, ch, make the message and ease up trying to railroad customers. Even us loyal customers for a long time "' will leave! Don't forget, we are customers of HP by "choice"!

  Problem is now solved. Thank you all for your comments!

• OfficeJet Pro 6830: Problem with printhead

  My operating system is Mac OS X 10.5 Yosemite but who did not have the menu drop down.  In any case, I too more ink for my Officejet Pro 6830.  I ran through the troubleshooting suggestions, nothing worked.  I've unplugged and took ink and back in.  My printer was purchased on 06/05/15.  I do not see the feature that allow the print head be replaced, who would say that my printer it just says: Oxc19a0020 and problem with printhead.  It appears so, there is nothing that can be done other than to buy a new printer?

  Solved!  HP sent me a replacement.