HP Officejet Pro L7590 all-in: HP officejet Pro L7590 prints 1/2 of the line of text on several lines of the document

Similar Questions

• OfficeJet Pro 8000 prints multiple pages of the same document

  Info:

  HP Officejet Pro 8000 A809a

  Windows 7 Pro 64-bit

  Last driver and firmware from HP

  When a job is sent to the printer (web, Word, Acrobat, etc.) the printer keeps printing multiple pages of the document.  Sometimes it will print the first page and a second partial page, then it reprinted again and stop at the same place on the partial page.  She does over and over again.  I ran the HP Diagnostic Utility and it was impossible to print a test page, even after turning the power on power off, then on.   Any suggestions, or is * another * bad printer?  The first was sent and replaced, so I think that this model is just a lemon.

  Thanks for the suggestion, but it didn't work.  I tried to reinstall the driver altogether package three times with no result.  I ran the utility programs that supposedly allows you to solve problems, but public services could not even to generate a test page.

  It seems that I finally found a solution, however.  I installed an older driver for MS Vista 64-bit, and that seemed to do the trick.

• OfficeJet pro 8600 print a single vertical black line when using the charger

  OfficeJet pro 8600 print a single vertical black line when using the charger

  Hi @realestatejeann,

  I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  If you need help, let me know.

  Good day!
  Thank you.

• Lexmark Pro 901 printer loses connectivity with the computer

  I have a Lexmark Pinnacle Pro 901 printer I bought at the office supply store there are several moonths. I hung it, and it worked for a short period, then I got a screen prompt saying that there is no connection between the printer and the computer. I was on the phone and even authorized Lexmark technicians to have remote access to the computer 2 times. I've been on the phone with them about 10 times and had even them I would send printer back and they sent me new printer. I even had a friend local tech come and he has reinstalled printer drivers, each time, that it's the same thing, printer will work for one or two jobs and then stops printing. I can still make copies and yesterday I scanned and sent by e-mail a document, the Green WIFI light is on. I'm so frustrated that I just want to get rid of this printer. Help!

  Hi BrianParkerWX,

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en&ProductCode=LEXMARK_PINNACLE_PRO901&focusedTab=downloads#1

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• OfficeJet pro 8600: printer works fine, but the software is not

  Printer works fine.

  However, the HP support the program "HP OfficeJet Pro 8600" will not start. I can see it in the HP folder under all programs, but clicking on the program name has no effect. The program name poins to "C:\Program HP HP Officejet Pro 8600\Bin\HP Officejet Pro 8600.exe" - UDCDevicePage Start

  In addition, in devices and printers in Control Panel, the printer connected displays. By double clicking on the icon takes me to...

  

  Opening HP All - in - One Printer Remote takes me to the window right... but the printer shows offline, and the various functions (scan, fax, etc.) are not available. (As noted, the printer is currently online, and I can print correctly.

  Connection to the wireless printer.

  All these functions work fine if I call them from the physical control on the front of the printer Panel.

  I don't know if these are two separate issues, or the two aspects of the same problem.

  Any thoughts?

  Thank you.

  Hello

  Try to install the following hotfix, then try to open the HP Officejet Pro 8600 software:

  http://support.HP.com/us-en/document/c03640384

  You can see any difference?

• OfficeJet pro 8509: printer stuck in cleaning the print heads

  Printer stuck on the envelope and has been removed with the exception of the corner (2.5 × 2). Turned on the printer to see if it would come out a up... now by initial start-up, he is stuck in cleaning the print heads, but not leaning print head. Help... Thank you.

  Hi @rodman2,

  My apologies for the incorrect link. Here are the links for the jams paper and transport for the HP Officejet Pro 8500 A909g, it will display appropriarte steps to clear the jam.

  A Message appears 'Transport Jam' for HP Officejet Pro 8500 first (A909n) and 8500 wireless (A909g) all-in-One Series

  A message "Paper jam" for the all-in-one HP Officejet Pro 8500 first (A909n) and 8500 wireless (A909g)

  If you still experience the problem you after trying the steps in the link above, I recommend you contact HP for assistance.

  Contact HP:
  Step 1. Open the link: http://h22207.www2.hp.com/us-en/contact-hp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps. Have a great day.

• OfficeJet 4500 510n - print jobs stuck in the queue when using wireless

  Hello

  I bought just a new Officejet 4500 510n yesterday and I have a Dell with Windows 7 64 bit laptop that I connect to the USB or wireless. The reason for this is that sometimes, the laptop is not right next to the printer and we need to print things (for example, my wife works upstairs sometimes with the laptop and the printer is downstairs in the living room). I was able to get the configuration of the printer on both the wireless and USB without any major problems and it prints fine when I print via USB. However, when I print wireless, the print job appears in the queue and shows that it is printing, but he never curls work all the way. The work gets "stuck" while waiting in line, for example, it gets stuck at 772 bytes of 940 bytes

  I downloaded the HP Print Diagnostic here tool and ran it and and it passed all the tests first time. However, when I goto the last test, which is to print the test page, it sends the print job to the queue and then everything gets stuck as indicated above. I was able to cancel the job and it comes off very well, but restarting the work does not work, it just get stuck again. Meanwhile, I don't get ANY error messages at all.

  Here's what I've done regarding troubleshooting:

  -Ping the printer - spent

  -Restart the service print spooler - no change to the problem

  -Check that the printer is set as deafult - spent

  -Update of HP Ran to ensure there is no missing updates - found 2 updates and install them

  None of the above has solved the problem, so I'mm this ad here in the hope that someone may have had this problem before and fixed it.

  Thank you!

  Thanks for the reply.

  It turns out that I could solve it myself. I went to add the printer wireless on another laptop, I have here on my home network and it printed a page of test very well, so I thought it must have been a bad installation on the main laptop.  I removed everything and reinstalled as a wireless printer, and it worked perfectly. Amazing what can make a bad installation.

• HP Officejet 4620: portable printer communicates only with the computer

  Last home had this printer set up under the name of wireless. lost connection cables so had to buy a new one. Printer goes and copies, scans, etc. Have unplugged, said prayers, and still it wont connect. Just bought new cartridges so you don't want to throw it out the window right away!

  Document is the printer online. Mark Exclamination (troubleshooting) appears on the printer control panel

  Hi @chaloupay,

  I'd love to help you with your Officejet 4620! Thank you for taking the time to post in the Forums of HP.

  I understand that you were able to print until recently, and now you see an exclamation point on the screen of the printer. Performing printing and Scan doctor could help. HP printing and doctor Scan is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to find that the key and the box are both in a green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

• If you see a red X (), follow the onscreen instructions to fix the problem.

Please let me know if that solves the problem, or if you need assistance. In fact, if this helps you to find a solution, please click on the button "Accept as Solution" down below in this message.

Thanks, I look forward to hearing back on your part.

• Photosmart Prem C410 all-in-one: our laptop and printer AiO are on the same network, but laptops can 'see' printer

  Our two portable Windows 10 both our Photosmart Prem C410 AiO printer are connected to the same network (as evidenced by checking the name of the network of all 3 devices).  We were able to connect between laptops and printer without problem (printing, scanning, etc.).  A blow, or laptop computer can "see" the printer.  I uninstalled and reinstalled the printer on two laptops, but when I enter the IP address of the printer as part of the installation process, I get the error message (on computers) "your printer is not found on your wireless network.  I used the wireless Wizard connect to the printer, restarted the wireless router and restart the two laptops... the IP of the printer stays the same every time and laptops and printers continue to be connected to the same network named.  Help

  On the printer's wireless radio was 'on' but I clicked OK anyway.    Disconnected and reconnected to the network and noted the address IP of the printer had changed.  Laptops are now able to see the printer.  Problem is solved.

• HP OfficeJet Pro 8610: Printer cannot connect to the new wireless network

  I got the OfficeJet Pro for a while and everything worked very well (including wireless printing from my Mac and iPad AirPrint). Yesterday, we got a new Modem Router (from Ubee). As I tried to connect the printer with the new network, I fail miserably.

  Here's what I've tried several times: on the small screen of the printer, I select: Network Setup > wireless setting > Wireless Setup wizzard. The printer seems to networks, find the network and asks me the password, I get the password (I did this several times, so no typos!). The printer then "trying to connect to the network"... then it crashes: for a very short moment, I get a blue screen with a white error code (not always the same, for example.) B3FF3802) and then the message "error in the printer, turn off the power, then press.

  I turned off the printer and turn it back on several times (incl. pulling out the power plug and restart after a while), but when I go through the steps above, but I just get the same endresult.

  I deleted the old network as I feared it might interfere with the creation of the new network. No noticeable effect.

  I printed the "results of the wireless network test," which confirms that "your HP printer is unable to connect to your wireless router. In the results of the diagnosis, he states that 'network name (SSID) was found - Fail.

  I quite understand the message that the printer detects the network and shows good SSID / network name. I thought to enter the SSID manually but can't find where I could do.

  I'd be very grateful for any suggestions on what could be the problem (I can't imagine that the printer would not work with a new router... I searched the internet and found stuff on 'Hello compatibility', but do not know which is the issue I'm facing.

  Thanks for your help!

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

• HP Officejet Pro 8610: printer directly connected to the Internet

  I'm trying to register for the HP ink cartridges.  The application calls a code to write on request.  However, the printer tells me that Web services are not enabled on my printer.  How can I connect a printer directly to the Internet.  I use a USB cable to connect the printer to my laptop.  Can someone help me so that I can complete the application of the ink?  Thank you!

  mcbrighde

  Hello @mcbrighde,

  Welcome to the Forums of HP's Support. I understand you are trying to join the instant ink program, but need assistance in obtaining your printers code request. I would like to help.

  In order to get the printers claim code, you will need to have the printer on a wireless network. An ethernet or LAN connection will also work. This will give the internet access to the printer so that the ink levels can be monitored.

  You need not remove your USB connection for the printer on the wireless network.

  The following link will help put your Officejet Pro 8600 on the wireless network.

  HP OfficeJet printers - printer wireless (Windows) installation

  Once the printer on the network, tap the icon of ePrint/Web Services to enable Web Services and acquire the printers claim code. The icon you are looking for is in the lower left corner of the screen printers.

  

  You can also use the following link to view more detailed instructions.

  HP - service and using HP ePrint printers

  If you need further assistance or have any other questions please let me know.

  I'll be happy to help you.

• OfficeJet Pro 8600 Print more stuck in the wireless network that

  My windows computer uses XP with SP3.

  I recently installed this new printer / all-in-one. The printer is used in a business office. Earlier in the day, the print function works fine. The function scan and I works pouvons fax direcltly to the computer. I can print from my I phone. But then, without any error message printouts begin to get stuck in printing (QC)

  I can always print from my Iphone and I can always use the other functions (scan & fax). I can print to other printers on network.

  I noticed that hpnetworkcommunicator.exe runs twice in the Task Manager when this happens and I end a session to release sometimes draws. In addition, when this occurs I can restart the computer and which also enables the printer working properly again. When I restart the computer, I'm going to finish the rundll32.exe process I've ever had to do before installation of the new printer.

  I tried the HP print and doctor Scan and everything removed but she recommended that disable the firewall settings. I still have the problem with the firewall disabled.

  Thanks for any help.

  http://support.HP.com/us-en/document/c02817031

  Follow this document, sounds to me like you may have to uninstall/reinstall the printer software. Try reinstalling from the downloaded driver at www.hp.com under Support and drivers/Drivers and software. Good luck!!

• HP Officejet Pro 8610: Printer says "Blocked by the administrator", I can't make any changes

  I can't make changes to my printer.  He said: "this feature has been locked by your administrator or the person who set up the printer."  I am the sole owner of this printer, I don't know how this setting is enabled, but I need to be able to change the settings, so I can connect over the Internet to my father's House.  Thank you sincerely KD

  When I access the settings it won't let me reset it.  It reads "service has been locked by the administrator or the person who set up the printer."  Please send additional information.  Thank you for your help.  KD

• HP Officejet Pro 8600: Attempt at analysis of the documents through the group via wifi printer

  Nice day

  I have a laptop Dell Inspiron 17 with installed Windows 8.1.  I use the printer above via the computer of my husband with a homegroup and wifi.   I have no problem with the printer it prints from my laptop, but I can't scan a document through my laptop, and I ask my husband to do it each time through his computer.  When I tried to install the printer directly to my laptop with the HP disc that came with the printer that tells me my computer need to be updated for this purpose.

  I don't know how to upgrade my laptop to accept this facility, or preferably a way to browse the homegroup and wifi. Anyone can solve this problem for me please?

  Hello X-23,

  Thank you very much for your kind and detailed instructions, sorry for the delay in responding but due to storms we have been without internet for a while.  I copied your instructions, but as we are about to leave for vacation and being an amateur, I need time to try, but you will no doubt know the result when I succeed.

  Kind regards

  Meg6

• HP OfficeJet Pro 8600: Printer is found on the network

  The printer has been working fine for months, and today it is not accessible to the assigned IP address. No computer can print it or find, even when manually enter the IP address, even if the printer is connected (it scans to a network folder and self-diagnosis is OK for the wireless and network).

  Any suggestions welcome.

  Thank you very much

  François

  Hi François,

  Try restarting your router by unplugging its power for several seconds, then let a minute or two to start.

  Restart the printer as well and check for the difference.

  If it does not help click on the network on the printer icon, tap Settings and select Newtork default settings, then try to restart the PC and try to print again.

  Please let me know if this is useful,

  Otherwise I would like to know the exact IP address of the printer.

  Shlomi