HP Officejet Pro L7680 all-in-One

Similar Questions

• HP Officejet Pro L7680 All - in - One will not print black

  Original title: HP Officejet Pro L7680 All - in - One

  I started my printer and it won't print in black.  Don't copy in black no more.  Test page does not work and the color works very well.  I changed all the cartridges, so it isn't the ink... No idea what is the problem?  He served 6 months off and disconnected.

  Hello

  This forum is for comments on the Forums for answers and you should ask at your
  questions in the Windows Forums for answers corresponding to your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  It also helps us to help you if all the useful information.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ==============================================

  In this case you should check with HP Support, their documentation online and drivers,
  and ask questions about known issues in the forums of HP.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

• My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.

  My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.  I tried aligning the printheads and clean the print heads, but still does not work.  Help!

  Thank you.  It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head?  I will contact HP support.  Thanks again for your help.

• OfficeJet Pro L7680 all-in-One: HP Officejet Pro L7680 all-in-One

  Yellow & blue color on the machine being empty cartridges, the machine doesn't let me print anything in black ink only.  It cancels the print job.  I want to use the black print cartridge (large & 1/2 full) before installing the new HP all-in-one, I bought. The black cartridge is expensive, about $70 + as I recall, & I'll be doomed if I lose.  Anyone know of any way to get around in blue & yellow cartridges so I can print in black?  This kind of greed on the part of a business is driving me crazy.  Any help would be greatly appreciated.  Thank you.

  Change the printer in gray scale, see the Manual pg 164.

• Scanning multiple pages with HP Officejet Pro L7680 all in one

  I tried every setting I can think.  I unchecked all boxes that says it will analyze each page in a separate document.

  How to scan multiple pages of a document?  It makes me crazy!

  I tried to run the scan of the computer and the all-in-one control panel.  No matter what I tried it still scans each page in a separate document.

  Thanks for any help you can offer.

  NEVERMIND - I FIGURED IT

  We thank you all for your help: 0

• HP officejet pro L7680: hp officejet pro L7680 all in one scanner only

  I use this system as a scanner only. It is not connected to a computer. Is it possible to print grayscale only from the printer console? Thank you.

  Hello

  Cunfusion, confusion. Scanner will not print. What you trying to do? Do you want to copy (similar to the copiers)?

  Under the terms of the copy function, you have 2 options: color and black. Please select black.

  Kind regards.

• Scanner of HP officejet Pro L7680 all-in-one does not

  I have an iMac with OSX Maverick running and after that I have updated with the new software of Maverick, the function scanner no longer works.  I now give an error that says: cannot log on to the device.  I also can not re - install the package of software original HP of the CD because he says that is not valid.  I followed step by step on the HP download site and still no luck... Someone at - it suggestions

  Hello

  Please, first check the list and then download and install the driver:

  http://support.Apple.com/kb/dl907

  You may need to restart the computer after you install the driver.

  Kind regards.

• OfficeJet Pro 6978 all-in-one: OfficeJet Pro 6978 / will not download drivers

  I just bought this printer Office Jet Pro 6978, All In One Printer.  It won't let me download the driver listed in the steps to implement, it fails every time.  I tried to use the CD that came with it, it gave me a message "this computer's operating system is not supported."   So this printer will not work on my 64-bit?  Or elsewhere?  My computer is a HP.  Where can I find a download driver for this printer for my operating system?  When it prints, it prints a nonsense.  % beginprolog % beginresource: file and so on with such things.  I am at a loss... Any help would be great.

  Hello

  Sorry, but the printer is not supported on Windows Vista 64-bit.

  64-bit support is only available in Windows 7 or later operating systems.

  You can find the printer specs below:

  Vista 64-bit is not supported.

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6970-all-in-one-printer-series/8289585/model/11161264/document/c05061732/

  You must upgrade your operating system to a later version to use instead an OS 64 - bit, Windows Vista 32 - bit to insall or replace it with another printer, compatible with your operating system.

  Respect,

  Shlomi

• Installation of the HP Officejet Pro L7780 all-in-One

  HP Officejet Pro L7780 all-in-One

  Windows 7 64 bit

  Hi, I have downloaded software from HP in order to install my printer. For some reason any installation fails and I would really like to help. Step by step of my installation procedure->

  I run the program "to add a series of all-in-one Officejet Pro unit

  I chose the wireless connection

  The program runs and find a printer 'Officejet Pro L7700' I select it and click Next

  He runs the installation for 5-10 seconds, and then it says that the printer was not complete.

  I ran the install several times (also after restart the printer and the computer) moved always

  The connection of printers is configured properly, to the best of my knowledge.

  It also print documents computer wireless. My problem is that I can't scan a document to your computer. When I choose the scan of the computer, it tells me that there is no scanning settings.

  I have no idea what to do...

  Hi RazorkillerC,

  You can scan from the HP software successfully?

  1. open the Solution Center, and then select settings

  2. select scan settings

  3. delete the shortcuts on the right side

  4. click on the device to update, and then close the scan window

  5. open again the scan window

  6. add shortcuts on the left side to the right side

  7. click on the device to update

  8. try scan from the front panel of the printer

  

• OfficeJet Pro 8600 all-in-One connected as network printer loses connection

  In December 2011, I bought a HP Officejet Pro 8600 all-in-One to replace an Officejet 6500 as my network printer home. The 6500 worked very well on my cable, but his screen did not, I tried some of the features offered by the 8600 and I got a good price on a new warehouse of BJ. I have the 8600 connected via ethernet (not wireless), with a static IP address. All my computers on the network are running Windows XP Pro SP3 and are up-to-date with Microsoft updates. However, from one day to the next my 8600 will lose connectivity scan (Scan of the computer shows it as being disabled on all my computers at the same time, and I can't reconnect), and if I do not have anything he'll (as in a few hours) also lose connectivity impression. The only way to restore connectivity is to uninstall the HP Officejet Pro 8600 device software basis of all computers, and then reinstall the printer. I had a phone conversation and two debates with HP Technical Support; They suggested that the problem is in the firewall on the computers (but if that were the case I don't think that the loss of connectivity would occur on all computers at the same time), the IP address setting (doesn't make sense) and the printer driver is not not the latest version. I tried all the suggestions, and none of them have solved the problem. The last counselor "has raised the issue to the next level", which proved to be a Manager with no technical expertise and his only suggestion was that I have to return the printer to the merchant. I think the problem is the firmware in the printer (which, according to the 'update' on the printer option, is the latest version). Any other suggestions or experience?

  After a lot of research and find the settings that I did not know that Windows XP offered, I found that the following appear to have solved the problem I've known - at least the printer is now operational for more than 48 hours without losing printing or scan connection. Here are the steps I used:

  1. Start Control Panel  connections network and Internet

  2. Choose "network connections."

  3. Right click on "connect to the Local network.

  4. Choose "Properties".

  5. In the top window is the name of the Ethernet computer connection port, select "Configure" next to this window

  6. Select the tab labeled 'Power Management'

  7. Uncheck the box "allow the computer to turn off this device to save power".

  8. Select the "Advanced" tab

  9. Select the entry "power saving Mode".

  10. If this entry is set to change 'On' to 'Off '.

  11. Select 'OK', and then close the windows that were opened

• I have an Officejet Pro L7580 all-in-one. How do you find the printer did how many copies?

  I have an Officejet Pro L7580 all-in-one.  How do I know how many copies the machine made?

  Dragon-fur (unusual name!)

  Thanks again for your suggestions, which led me to the answer.

  Looking more closely at the options in the HP Solution Center, which I thought I had already exhausted, I followed these links - settings, print settings, the Toolbox for printer, information, reviews, myprintmileage, source, which led me to the total number of pages, number of total jobs and many other information, which, apparently, is monitored by HP.

  Thanks for the clues get me there.

  Kind regards

  Tony

• HP Officejet Pro 8600 All in one – elbows / folds document

  I have a HP Officejet Pro 8600 all in one. I've used it for almost a year and recently when I print on plain paper my doc over dating a turn on paper. The elbow is always in the same place, 2 1/2 "from the top of the page. The crumpled section is about 1/2 "in length. Impression of quality and all the rest is good.

  I printed a few pamphlets with this printer using heavy paper for brochure of gasoline that does not bend like my regular stock. Any ideas.

  I have the same problem, but just behind the box!
  IT IS SHAMEFUL! The printer is practically unusable!

  Sometimes it shredded paper!

  The printer driver is also very basic, compared to Canon for example.
  On top of that, it does not save the changes to your settings,
  We have to bury in the HP software!

  Also, the printer is unable to make a copy without border.

  And last but not least the printing quality is very poor.
  my printer Canon does better printed with generic ink...

  It is also large and noisy.

  I completely regret my purchase.
  I can't even sell it now as it's deffective.

• Cannot get the HP Solution Center to load for officejet pro L7590 all-in-one printer

  Unable to get the HP Solution Center to load. Have an officejet pro L7590 all-in-one connected wireless (through the router) on my new computer Windows 8 but had to deceive it calling it a direct connection.

  I have a new computer with Windows 8.  I managed to get my HP officejet pro all-in-one L7590 printer connected and working with software downloaded from HP.  During installation it placed an icon on my desktop (the old format disktop I love) to the center of HP solutions, but when I try to open the Solution Center a message indicates that the installation is not complete.  When I try to install more software it brings back me to the orginal installation and indicates that the device is already installed.

  I want to clarify again once my choice of installation was directly connected even if it is wireless via a router.  It was the only way I could make it work.

  The Network Configuration page was just that you will find the IP address, but you have this.  It is not as important now.  Now that I've shown you a method to help you analyze let us begin the process is not easy to get the Solution Center works again.

  I was very happy to find an official document on your computer Windows 8 and the solution Center.  I think this should help you when you select your operating system on this page.  It is titled "The scanning device estintrouvable and other related errors" and will be a little better explain what you need to try to get the Solution Center to work once again, I am.

  Let me know if you have any questions concerning one of the steps here and I will do my best to answer those as quickly as possible. I do not know a few things to do if it does not, but it is certainly the best advice to try first.

• All-in-one Officejet Pro 8620: officejet pro 8620 all-in-One scan negative

  How to scan negatives and 35mm on a HP Officejet Pro 8620?  I recently read it is possible on older versions, but can not find all the information about the printer I have.  Please answer quickly because it's something I have to do for my business.

  Hello

  Negative scanning requires a special film holder (as in This example), indeed such was offered by older models and not in the past years.

  The 8620 do not offer this kind of functionality, as well as any current inkjet all-in-one device and you can't scan negatives with your printer.

  Only proffesional scanners offer a these these days, not all in one of the devices.

  Here's the only model I have managed to find to your purchase today, there could be some more and it's worth trying a such google searh:

  Digital flat HP Scanjet 5590

• How is my scanner HP Officejet Pro 8500 all-in-one will not work on Windows 8?

  I just upgraded to Windows 8. My HP Officejet Pro 8500 A910 all-in-One printer works fine, but the scanner won't. I get an error message that says: cannot find the scanner. What can I do to correct this situation? HP has a driver that works with Windows 8?

  Did you uninstall this printer before the upgrade to Windows 8?

  If not, then I uninstall the software for the 8500 A910 and reinstall with the drivers up to date.

  The link here for the driver for the 8500 A910 page has e-all-in-one

  You can also get drivers for HP printers in Windows 8 by using the HP printer installation wizard.