HP OffJett wireless 6500n

Similar Questions

• HP OfficeJet 6500n wireless connection problem

  Hello

  Just bought a HP OfficeJet Wireless printer to replace my current HP printer. I spent 3 hours trying to set up this printer with my wireless network and send it hide! I get the following error

  Your PC cannot communicate with your printer at address of 192.168.1.35. Check all cable connections. Make sure the printer and the PC and the router are powered on and connected to the network.

  Unable to communicate with your printer at this time. This can be caused by a firewall. If you use firewall software, make sure the port UDP 427 is unblocked from your printer to 192.168.1.35 to your PC.

  Unable to communicate with your printer at this time. This can be caused by a firewall. If you use firewall software, make sure the port UDP 427 is unblocked from your PC to your printer to 192.168.1.35.

  If you reconfigure the firewall, click Retry to see if network communication is unblocked or click next to continue.

  I use a desktop Windows XP connected life Machine cat 5 to a Zyxel router. The strange thing is that the printer gets assigned ip address as I can see on the screen of the printer by looking at the network config. I have no firewall software or hardware firewall turned on, what's wrong?

  I have the experience of the network. For now I'll out of HP printers and have been a fan of them for many years, please help!

  Thanks in advance.

  Ian.

  A static IP address is always a good idea for a printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address). If you don't know it, enter the current IP address.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the gateway and DNS white. Click on ' apply

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Change the default settings for all Mac on a wireless network, Officejet 6500n, Lion 10.7.4

  Hello

  In my view, there are a lot of discussions on change the print settings by default for printers hp in Leo, but my question is a little different. I have a network running on a wireless Netgear N600 router, and my HP Officejet 6500 is directly connected via USB. I want to set up the printer so that anyone who connects to the network via a mac wireless has the default value depending on parameters in any printing application:

  1. Quality: Fastdraft
  2. Color: gray
  3. Black cartridge only
  4. Print on both sides: long edge binding

  When I go to the page of the printer by entering the IP address in my browser, the administration utilities do not allow me to change the default settings and change the default settings in CUPS is useless since applications such as Safari, Word, and preview override these settings.

  Is that what I want possible?

  Thanks in advance.

  We gladly invite you.

  Indeed, that is right. When printing from a computer, the print settings can only be configured on the computer.

  The unit only will allow us to change this type of parameters for the work only stend, carried out from the device (e.g. copy or printing of the device using a memory card).

  Some business models can provide options to force parameters, print, but I'm afraid these capacities are not intended for consumer products.

  Kind regards

  Shlomi

• When you will provide pilot 6500n for the lion of beef?

  Printer 6500n purchased, which operated wireless using beef system. I've upgraded to lion ox, is not supported. My question is what hp will modernize drive for this operating system?

  Hello

  the printer make compatible with Lion.

  Just to make sure that we have both refer to the same prioduct, it is the HP Officejet 6500 wireless (E709n)?

  If so, follow the steps below to install the printer:

  http://support.HP.com/us-en/document/c02911238

  If not, please specify the exact printer model.

  Kind regards

  Shlomi

• After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

  After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

  Possible explanation.  It is likely that batteries, so fresh, can be irregular in size.   The uncertain connection would therefore tend to lead to a failure to blink and you declare.   Read my thing...

  Batteries.

• New Magic Mouse (wireless) works erratically

  New Magic Mouse (wireless) said low battery but it does not use a battery? How to charge it?

  The Apple article below should help.

  Recharge the battery in your Apple - Apple Support accessory

• Can I use the Time Capsule wireless for multiple computers without using it as a router?

  I am looking for an external backup for 2 computers drive.  I have a desktop iMac and MacBook Air.  I like the idea of being able to back up my MacBook Air wireless, but I need to make sure that it will work the way I need to.

  I already have a wireless router that works well for me, I don't need the time Capsule to act as a router. I'm just needing a wireless backup drive.  So, the question is, can I use the only time Capsule as a storage device for backup of wifi or do I also have to use it as a wifi router?  My fear is that the router service is not as good as the router, I currently have.  I live in a big House of 2 floors, making it very difficult to receive a strong signal throughout the House.

  can I use time Capsule only as a backup wireless storage device or do I also have to use it as a wifi router?

  Time Capsule need to connect to your router/modem existing using wired Ethernet wired, permanent.

  If you plan to use the time Capsule to back up your Mac with the help of the application Time Machine on every Mac, the Mac will have to save on the wireless signal Time Capsule for the process to be officially supported by Apple.

  While it is possible to turn off wireless on the Time Capsule and try to save it to your existing wireless network... and it pourrait work... but there will be no Apple support backup problems... so it would be a good idea to plan to use Time Capsule wireless backup purposes.

• My wireless mouse works fine everywhere except in Mail. It is simply not to scroll or work at all.

  My wireless mouse works fine in all applications except Mail, where it does not at all. It is altogether we els and absent when I try to use it either as a pointer to a specific e-mail or use it to scroll. It simply is not there. What gives?

  Please could you tell us what operating system you are using.   It isn't iOS with an iMac.

• Bridge of Airport Extreme wireless

  Hi all

  I have an airport extreme and I wanted to install a wireless bridge.

  IM on the 2nd floor and my router is on the 3rd floor

  my wireless signal is weak on the 2nd floor, so I wanted to bridge so that I get full signal wireless 2nd floor also

  I do not want to use cable (from the router to the most extreme airport)

  can someone explain to me how to do this

  Thank you

  Hi irfan_mu,

  Check this help page: AirPort base stations: install and configure a wireless network extended (802.11n) - Apple Support

• Add a preferred wireless network

  I want to configure the wireless preferred networks on a pool of 25 computers at once while no users of the console/GUI/admin is entered, that is to say the computers are provisioned waiting on the registration screen. All computers are properly configured for access "remote management".

  I'm looking for something in Apple Remote Desktop to add some favorite wireless networks with the terminal command "networksetup" to these remote computers

  I got the terminal command:

  sudo networksetup - addpreferredwirelessnetworkatindex en0 ssid 0 wpa2 password

  Any help?

  Hi basil,

  -Something that should work can use the ARD from the Mac Admin officer, to run ssh sessions by officials of the ARD on clients, and then run the Terminal command.

  -J' used a script like this before restart locked ARD Agents on clients via ssh.  No GUI sessions running on the clients.

  The script Unix in ARD would be similar to:

  for N in 'client1.local' 'client2.local' 'clientn.local '.

  do

  {

  SSH '$N' 'sudo networksetup - addpreferredwirelessnetworkatindex en0 ssid 0 wpa2 password.

  }

  fact

  -The script is run using an adminuser which is available on each client with ssh keys setup (no password) and an entry in/etc/sudoers so the sudo command prompts nor a password.

  -L'adminuser can be activated for this task in a separate script:

  Disable: chsh s operation adminuser

  Administer enable: chsh-s/bin/bash

  hope this helps, dwbrecovery

• IPad mini is not connect to Wifi wireless

  Mini Wireless iPad (iOS 9.3.5) does not connect to the wifi at home but for printer and android phone will be. Have you all on iPad and mydlink router resets.

  Action taken:

  WiFi connected in Apple store - Rep suggested that make a backup and then restore iPad at home.

  Results:

  Can not stop to find my iPad / "check failed: there was an error connecting to server Apple ID.

  Several attempts, the problem persists.

  Looking for suggestions.

  Hi RubyBlu,

  I see you're posting here because your iPad mini Apple Support communities is having problems to connect to your home Wi - Fi network. You talked about since someone at the Apple Store that you said to try to restore your device using iTunes, but you can't not to disable find my iPad to be able to do. I know it's important to be able to connect to the Wi - Fi at home, and I'm happy to help with this.

  As a first step, I recommend take a look on this website and perform these steps in the order, if you have not tried them already:

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

  If you are still looking to restore your device to factory settings, I'd recommend double-checking to make sure that you have a current backup of first. This is a resource for that if you need a refresher on how to create a back up:
  The backup of your iPhone, iPad and iPod touch - Apple Support

  Before you can restore your iPad, you need to follow the instructions here to disable find it my function for your iPad:

  Delete a Mac or iOS device on which you can not disable Find My iPhone

  If you can't disable find my iPhone on the device, turn off the unit so it will Disconnect, then remove of Find My iPhone on iCloud.com.

  Note: You can also delete your iOS device by clearing the first - just follow the instructions below to remove an iOS device, you do not have. You can later restore the device of an iCloud or iTunes backup.

  1. Turn off the device you want to remove.

  2. Go to find my iPhone on iCloud.com.

     If you don't find my iPhone on iCloud.com, your account has fair access to the web features only iCloud. To access find my iPhone and other iCloud features, set up on your device iOS or Mac iCloud.

  3. Click on all devices, select the device offline, then click on delete account.

     

     If you don't see a delete account, click again on all devices, and then click the Delete button next to the device.

     If the device comes online again, it reappears in find my iPhone. If your device again, turn off find my iPhone on the device (follow the instructions above to remove a device by disabling Find My iPhone), or if it is an iOS device and you no longer, follow the instructions below to remove an iOS device, you no longer have.

  iCloud: remove your device, Find My iPhone

  When you have selected "Delete account", you should be able to restore the device normally using iTunes.

  Take care!

• can I listen to music on the watch with a wireless headset while I swim laps?

  can I listen to music on the watch with a wireless headset while I swim laps?

  Short answer, Yes, but you will water proof wireless headsets. Not for the first watch of Gen.

• Impossible to manually configure the wireless settings.

  I have an Apple Time Capsule of 7.7.7 version and no matter what I do I can't seem to accept my manual settings wireless.  My building a House requires several APs to provide adequate coverage, and time Capsule keeps selecting wireless channels that are in conflict with other access points in the House.  Does anyone know of a work around that will allow me to force the desired channels? I use a Windows PC 10 with Airport Utility for Windows version 5.6.1 configure time Capsule. Here are the steps I followed:

  -Select the "Time Capsule" on the left side

  -Click on the "Manual Configuration" button at the bottom

  -Select the tab "wireless".

  -Radio mode - menu drop down select "802. 11A / n - 802. "11b / g ' (very intentional)

  -Radio channel selection - I select in the drop-down "manual."

  -Select 'change... '. "and choose"36"for the 5 GHz channel and '1' for channel 2.4 GHz, then 'Ok '.

  -Select "Update."

  After restarting the device, I check the settings and I find...

  -Radio mode is back 'automatic '.

  -Selection of the radio channel is 'Automatic' and channels do not necessarily match what I selected initially.

  Someone at - it advice?

  The main problem is that the version of the AirPort for Windows utility is not designed to work with 802.11ac airport base stations. Unfortunately, Apple has not updated this utility since Windows 7.

  The other problem is that Apple has "dumb - which crashed" AirPort Utility for Macs and the iOS devices with version 6.x. One of the things that he removed has the possibility to define patterns of radio and channels that "stick" to the 802.11ac base stations.

• macOS Sierra will not be closed if the trackpad and keyboard wireless is connected

  Hi, after switching to macOS Sierra, the first time that I stop my MacBook Pro, it is stuck on the dark screen with the spinning ball. I had to force him to stop by the power button. The next same thing occurs. After looking in the console log, I noticed something related to bluetooth and I discovered that my wireless keyboard and trackpad are both connected (usually, I work with my MacBook Pro on a stand and I use the wireless keyboard and the trackpad). I unplugged the bluetooth and Mac went off smoothly. Did someone else experienced this problem? And does anyone have and idea about it? With El Capitan I could turn off the mac no matter what was connected...

  Thank you.

  GIO

  I try to remove the two devices in preferences Bluetooth, then re - match.

  I use them with a MacBook Pro, but I use Trackpad and keyboard with a Mini and not have not had any problems.

• Wireless connection is too weak to unlock with Apple Watch

  I install my Apple Watch to unlock my iMac, but every time I test this situation, he requires me to login with my password and told me that "wireless signal is too low...". »

  I use an end 2013 27 "iMac.

  Processor: 3.2 GHz Intel Core i5

  8 GB 1600 MHz DDR3 memory

  Any suggestions to solve this problem would be appreciated. Thank you.

  You use the watch with an iPhone 5 later?

  The unlock feature requires any model 2013 and later Mac running the new macOS Sierra using a Apple Watch, running watch OS 3 with an iPhone 5 or later.