HP Omni 200 PC 5400-T: video output for TV

Similar Questions

• Video output for PXI embedded real-time?

  I plan to buy a controller PXI real-time Embedded for security monitoring.

  Is it possible to use the video output of a controller PXI running RTOS to display a LabVIEW RT application messages? According to the literature, it seems that the use of the video output is more possible for Controllers PXI running Windows XP.

  Is there a specific application with LabVIEW RT?

  Thanx.

  H.L.

  Well, it works using the IMAQ RT video Out VI: images are displayed properly via the video output of the RTOS PXI controller running.

  Thanx.

• Video output for external monitor default

  I used my Dell Inspiron 9400 for several years, almost always with video output to a monitor 19 ' 4:3, using Fn + F8 or Win Key + P select this option for the single release. I have now broken screen of my laptop and wish the monitor output, the default output. Is this possible? I use Windows 7.

  My problem has been resolved:

  Click Start > Control Panel > NVIDIA Control Panel: select "set up several screens.

  In the window

  1: choose the nView Display mode to use: select "use only one display.

  2: select the display you want to use: select the listed monitor

  3: select the view that you want Windows to use as primary: select the listed monitor

• Satellite P200-1EE: DVD player HD Toshiba "video output for external device cannot".

  Need help!

  My P200-1EE won't play HD DVDs. At startup the HD DVD software with an HD DVD in the drive, the drive displays on the screen, and after a short time returns an error. The message is ' + Toshiba HD DVD Player - impossible to output the video to an external device. Please change your display device by pressing the FN + F5 keys after the end of the application ' +.

  Problem is that I do not use any display on the screen of the laptop. Only the screen of the laptop is available when I use FN + F5 suggestion. It does not cure the problem.

  Drivers are up to date as far as I can tell.

  Any help is greatly appreciated.
  Gandalf

  Hello

  I searched this forum for similar issues and I think I have a solution.
  It seems that the Realtek audio driver causes this problem.

  According to this Toshiba document a new soud driver installation will help you solve this problem of HD - DVD.

  Check it;
  HD DVD title does not play ("unable to output the video to an external device")
  http://askiris.Toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1664 788xml & sliceId = & dialogid = 24590306 & stateId = 1% 200% 24588233 20

  Good bye

• HP Pavilion 23 All in one PC: how to video output of the 23 Pavilion

  Hi HP.

  I use HP Pavilion23 AIO PC like my PC photography. I often have a video projector or tv but it wasn't a video output for Pavilion 23.

  I'm looking for video output solution fom my PC AIO.

  Are there any external video card, can I apply?

  Is there any device USB - HDMI that I can use?

  Please advice as it is an obstacle for my work.

  BenSiak Malaysia

  Hello

  They are many, such as:

  http://www.StarTech.com/AV/USB-video-adapters/USB-3-to-HDMI-DVI-external-video-card-multi-monitor-adapter-1920x1080~USB32HDE

  Kind regards.

• HP Omni 200-5400 CTO desktop: need repacement DVD player model DS-8A5LH-EEL 619238-001

  Finally, the DVD on my HP Omni 200-5400 CTO Desktop PC drive is on and off since sometimes, now it's stop working completely. It will even appear in the BIOS.

  I think I need a repacement drive. I've searched for hours, but couldn't find anything. I wonder if someone can shed some lights on it.

  Thank you

  Wayne

  This computer accepts 2 versions.  One with lightscribe 537385-004 and without lightscribe 537385-800.

  The two replacements come without the bezel.

• HP Omni 200 PC: Computer configured for HD TV as a second monitor

  I am trying to use my HD TV as a second monitor set up my TV.  My goal is to watch movies from my PC to the TV.  The Omni 200 does not have VGA or HDMI connections.  So I tried to use a 3 USB to HDMI adapter with a long (25') HDMI Cable that I connected to one of the HDMI ports on the TV for my video output.  When I tried to detect the TV as a second monitor, I got a blue screen stating my PC was a dump of data and downtime.  Maybe it's that HDMI cards drivers were not really designed to win 10.  actually, the box said it was for Win 7, 8 and Vista, but the provider told me it would work to win 10.  They insured, in fact I got the driver for Win 10 that I installed, but with my PC crashed anyway.

  I'm now considering a 3 USB to VGA instead - and using a long VGA cable to connect to my PC - it has a female connector VGA built in my opinion this solution would work.  And I would use a divider audio stereo 3.5 mm cable to connect a left and right RCA audio cable to the TV.

  Someone has an opinion on the question of whether I'd be successful before I buy these cables?  Thank you. Dan

  You are welcome.  Thank you for the additional information.

  According to the Specifications of the motherboard , there are 2 - USB 2.0 and 1.0 on your computer 5 - USB ports.  Here is a video card that can allow you to connect to your TV.  I suggest you contact the manufacturer's Technical Support to make sure it works before buy you.  This will save send back if this does not work.  I do it myself before you buy all new components.  Therefore, it is difficult to know what works today.  Technology changes so quickly.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• replace the dvd drive omni 200

  I found the info for a 200 MS, but need instructions to replace the dvd drive in my HP Omni 200 5480.  or where to find it.

  Please, I beg you!

  Hello

  There is a HP guide (including a video preview) to replace the optical drive on the following link.

  http://support.HP.com/us-en/document/c02162108

  Kind regards

  DP - K

• HP omni 200 all-in-one: hp omni 200 display brightness and contrast

  I'm trying to adjust my brightness of the screen to the bottom... I already tried the right buttons... All that I can do?  I need

  for the low average display brightness to match printable photo of my laboratory.  Also is it possible to change the contrast?

  I checked online a little and can't see any other information. on this...

  Thank you...

  other than this issue p.s., I was very happy with this system!

  Sharon

  I think that you are good to go now on what I believe that it will keep the setting that you created.

  I don't know if CCC has an option to save these settings. He can just leave them until you change it again.

  Shut down the computer then turn it back on again, then check the settings to make sure.

  Note that if you ever update the ATI driver or update the software of the CCC, you may lose these settings.

  I'd write them down to safety on a case where you need to refer to them.

  If you use a calibrator as a Spyder (for example), you want to leave the CCC at default settings first, calibrate with the screen reader, then adjust CCC after for tweaking final with the brightness and contrast.

  To those who don't have not one built in graphics port. If you decide to extend your display Omni with a 2nd monitor, you can use a graphic like this USB card adapter. If you do, an external monitor is better than the built-in screen year only elon on what you buy. Amazon.com: StarTech USB to VGA video output Also, if you have a 2nd monitor already setup and the built in screen dies (All in One are known for this) the 2nd monitor will generally continue to work and you can always access the computer easily. Cannot override the built-in screen.

  So, as you already know, do not rely on your photos being stored only on the hard drive of the Omni. Use external backups.

  If my advice was useful, please indicate the appropriate post as solved.

  Thank you.

• Digital Coaxial output for audio/video receiver - does not

  I connected my LCD TV to my office from HP (9340f) using the S-video output on a Nvidia 9800GT video card.  The video is awesome, but I can't get the sound to work on my Harmon Kardon AVR146 receiver.  I plugged the exit at the back of the HP to the coaxial digital input at the back of the digital coaxial receiver.

  When I open the properties for audio devices and test the audio from Realtek, I can hear the sounds (piano?) of the speakers connected to the receiver, however, when I play video through windows media, or play a video game there is no noise at all.

  Any suggestions?

  have you gone to control panel-> Sound, then verify that the digital output is enabled.  No speaker ouput.

  (If you are using Vista, you should see a green check mark next to it)

  It is always useful if you tell us what operating system is installed. In this way without guesswork... I think maybe required ESP.

• Satellite P100-102 without digital-video output TFT-connection-Port?

  Hello

  We do not understand why mobile phones latest, as the Satellite P100-102 would be produced without digital-port connect TFT´s...

  On the market-enduser TFTs are popular, but it is not possible to use the digital interface with the portable toshiba. We are not interested in the purchase of laptops from other manufacturers, but our time flee.

  Can you give us a tip, then of the next generation Satellites with digital output to connect TFTs will reach the market?

  Best regards
  Sascha

  Hello

  Sorry, but I disagree with you.
  Toshiba designs laptops that support the digital port (D-video output port)
  Check for example the Qosmio of E, F, G series.

• Satellite 5105 and 5205 video output bad piece (US)

  The video output is good on the 5105.

  The image on the LCD will not give a complete picture. Thirdly, the bottom is either hidden or replica the upper third of the image. Most likely, I see a drooping white or gray. This occurred when starting, too.

  I replaced the LCD screen with another of a deceased 5205. This time, only the first third shows an image. The lower 2/3 seem to be blackened.
  In addition, the Toshiba Spalsh screen logo does not appear at startup (maybe it's because it's in the field of electricity failure).
  I have not checked the State of the screen LCD 5205. I also forgot to connect this laptop to external video, when I used the
  5205 LCD.

  I just want to confirm the video cable needs replacing.

  I would like to know how completely detach from the Palm of the lower chassis. I read the instructions provided by the sticky thread. I'm stuck at the point where he seconded the palmrest except for the area around the speakers ' top'. Better yet, should what cables I detach before completely disassemble the palmrest?

  Once this is done, I intend to replace the video cable, but I also see what looks like a metal shield in the middle of the laptop. Any thoughts on treatment that, too?

  Blurred image of 5105: http://img526.imageshack.us/i/toshiba510501.jpg/
  Then the lower part is gradually degraded: http://img29.imageshack.us/i/toshiba510502.jpg/
  and: http://img196.imageshack.us/i/toshiba510504.jpg/
  and go: http://img262.imageshack.us/i/toshiba510503.jpg/

  Then I rebooted the 5105: http://img196.imageshack.us/i/toshiba510505.jpg/

  The 5205 is even more colorful!

  http://img12.imageshack.us/i/toshiba520501.jpg/
  http://img150.imageshack.us/i/toshiba520502.jpg/
  http://img262.imageshack.us/i/toshiba520503.jpg/
  http://img526.imageshack.us/i/toshiba520504.jpg/

  I'm afraid I forgot to test the video output on the 5205.

  I also posted this on Notebook Review.

  Thanks for reading!

  Hello

  I; m afraid; It looks a bit like a graphics card problem...
  If replacing the screen did not help the GPU could be affected.
  In this case, the motherboard should be replaced. It would be the worst case, because a motherboard is the most expensive part for laptop.

  In addition, you will not find any what manual disassembly here on the Toshiba page.
  These manuals are not for use public and created only for the technicians of the ASP.

  But the world wide web contains lot of information and I would recommend to google for some details.

• Tecra 8000 composite video output

  I'm running the video output from my tecra 8000 via yellow composite video connector at the rear of the unit. I thought it was as simple as pluging in both sides of a RCA (one end to the video input of a video recorder) Jack and the other end into the video Tecra.
  I get NOTHING on the screen. What I am doing wrong?

  Thanks in advance

  Hello

  normally, you have to pass the video signal in the composite connection.
  For this (on newer models at least) by pressing FN + F5.
  This combination toggles the 'next' display/device combination
  If the videodevice primary and standard is the internal TFT, pressing FN + F5 once going to signal internal both TFT and RGB (monitor connector). Next time you press it, it will only in RGB, and next time, again, it should go to the TV output (composite).

  Try it!

  BR
  Tom

• Video output distorted on Qosmio F10

  Hello

  Until recently, my video output on my Qosmio F10 function works beautifully. When I connect my laptop to the TV the other day, using an s-video cable, the image had turned very distorted. The TV picture flickers and sometimes disappears completely.

  My laptop has the graphics card Nvidia GeForce FX Go5700 and I changed no settings what so ever of the point in time when the video output was working properly.

  To debug, I bought a new s-video cable and an adapter SCART. The use of these I've eliminated that the s-video TV in the port is the problem. It seems to me that if something is wrong with the signal from the graphics card.

  I would be very grateful for a diagnosis on this issue.

  Thank you and best regards,

  Johan

  If you are quite sure that the cable is ok, so it could also be a problem with the connection. Maybe lose plug or something like that.
  However, as a first step, you may try to update the page Toshiba graphics card driver.

  It would be very interesting to know if such question will appear on the new OS recovered

• Equium A200 - 1V0 DVD Player error impossible of video output to an external device

  Hello
  I use my Equium A200 1V0 laptop with Vista Home Premium, and whenever I try to watch a DVD using the preinstalled Toshiba DVD Player software, I get the following error...

  "Unable to video output to an external device. Please spend your
  display the buttons on the unit by pressing the Fn + F5 after the end of the application. »

  I do not have an external monitor, and have never had a. (By pressing the Fn + F5 buttons does not work, because...) I have not attached external devices!)
  The software used to work properly, and I have not changed the settings at all.

  I have now tried to reinstall with the latest download from Toshiba, but the problem remains.

  Any thoughts would be accepted with gratitude.

  Bufster

  Hello

  I found a boyfriend of the solution.
  How?

  I searched simply here in the forum and found this thread!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=114726

  Jack Black has posted a link to a useful Toshiba doc that says that this error is related to the Realteck sound driver.

  Update the audio driver and you must solve this problem!