Video output for external monitor default

Similar Questions

• Satellite P200-1EE: DVD player HD Toshiba "video output for external device cannot".

  Need help!

  My P200-1EE won't play HD DVDs. At startup the HD DVD software with an HD DVD in the drive, the drive displays on the screen, and after a short time returns an error. The message is ' + Toshiba HD DVD Player - impossible to output the video to an external device. Please change your display device by pressing the FN + F5 keys after the end of the application ' +.

  Problem is that I do not use any display on the screen of the laptop. Only the screen of the laptop is available when I use FN + F5 suggestion. It does not cure the problem.

  Drivers are up to date as far as I can tell.

  Any help is greatly appreciated.
  Gandalf

  Hello

  I searched this forum for similar issues and I think I have a solution.
  It seems that the Realtek audio driver causes this problem.

  According to this Toshiba document a new soud driver installation will help you solve this problem of HD - DVD.

  Check it;
  HD DVD title does not play ("unable to output the video to an external device")
  http://askiris.Toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1664 788xml & sliceId = & dialogid = 24590306 & stateId = 1% 200% 24588233 20

  Good bye

• T420 (4180 - 1 G 8): problem with VGA output for external monitor

  
  

  Followed by:

  I tried the latest driver Intel "generic" after you completely uninstall the device from Device Manager driver: without success.

  I tried a different monitor from another manufacturer: no chance.

  To remove the device driver as a cause as possible, I tried to boot from a boot Unbuntu CD: no chance.

  I activated the home screen on the VGA port in BIOS: screen stays black.

  I suspect that the VGA on my new Lenovo Thinkpad T420 port just does not at all.

  I opened a call with my material support.

  Kind regards

  Stéphane B.

• Satellite Pro U300: DVD issue - error: cannot output to external monitor

  Hello

  I had problems to play a dvd on my U300.
  Basically, the software would load but when I tried to play the dvd it says "can't output to external monitor.

  After exploring all the options I found nothing to stop what is happening. Then, I downloaded the latest version of the software for the toshiba site.

  dvdpl - 20070807102909.zip

  I resintalled this, but got the same error message.

  I uninstalled the software, then tried to reinstall, but it now produces just a mesaage error saying: he can't intsaller software on this computer.

  How can I reinstall it?

  Kind regards

  Mark

  I think you should check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=107781𚔅

  Jayjay has already provided a link to the Toshiba useful doc.

• No reading for external monitor first CC

  Hello all ~

  Workplace (and of course, now that I need to color correct), PP CC ceased to export the video to my external monitor.  I tried trashing prefs (hold Shift + Opt at startup) and is not the case.  Looking around, I noticed people with this problem when you use certain cards from BlackMagic, but my monitor is connected directly to the connector Thunderbolt of my MacBook Pro. I have attached my reading settings.

  Curiously, when I start my old copy of PP CS6 it reads to my external monitor very well.

  I got quite late in the night of the changes that I may have inadvertently started a few keyboard shortcut to change a setting, but I can't imagine what would, or why a trash preferably would not reset it.   Any help much appreciated.  Thank you very much.

  

  Well well, after a lot of poking and insistence I discovered what happened and how to fix it.  If you look at the image below, you can see that there is a row of razor-thin pixel pushing into my external monitor.  So basically what has happened, I resized the window and thought I did drag it completely on my main monitor, but my the program monitor and timeline were never very slightly overlapping on my external monitor.  When I moved them entirely on my primary monitor, the video on the external monitor reappeared.

  HOWEVER (!), this raises the question of why this problem is still that I didn't reset my editing workspace, I trash preferences and I did a complete uninstall/reinstall of the CC PP... and still had the same problem.  Shouldn't one of these processes have set things up to where they were supposed to be? Where these remaining settings are stored, and how can we get rid of them if even a complete reinstallation will not do the trick?

  Would have saved a lot of time if they had worked as announced.  Happy to be running (and color correction) well and I hope this can help others who may have the same problem.

  

• What is the best method for a video output to a monitor on the new iMac?

  I noticed that the new iMacs don't have an HDMI port. How can I get a video signal to a monitor in the sequel of my editing?

  Thank you.

  Tom

  in the accessories kit was without adapter?

  Search on amazon for mini hdmi port, from display connector<10€>

• Error code: this message appears when the player fails to output the video to an external monitor.

  I never put my laptop to play on an external monitor.  Why this new software of computer/Toshiba DVD thinks I want him to play here?  How can I change the setting on the laptop?

  Hi GrettaYoung,

  To better understand the question, please provide the following information:

  (a) when you get this error message? What is you receive the exact error message?

  (b) are what DVD software you referring? If it works well before?

  The following steps are worth to try, run the fixit available in the link below to clear multiple configurations

  How can I delete multiple configuration monitor to a computer that is running Windows Vista?
  http://support.Microsoft.com/kb/934552

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L650 - HDMI connection for external monitor

  I've linked the laptop to my Sony LCD TV via HDMI, no problem. I have a (Acer, 24-inch) LCD monitor that has a HDMI port also. I used it to play ps3 and xbox360 via HDMI connection, no problem. I have two lines HDMI 1.3. The two lines are working without any problems.

  However, when I connect my laptop to my LCD Acer just external LCD monitor can t work properly. I can barely see what is display on the monitor, very snowy. It's hard to describe. I took a photo but don't know where to download it here.

  I tried both HDMI lines, but both failed. I tried to change a few settings in the laptop, but nothing makes any difference. I'm looking for the driver for video card on the Web from Toshiba website and found that my current license is updated.

  I'm not a tech geek, but I think that I don't know something on the computer. Am I missing something here?

  Guys (and girls), please throw in an idea (tooth tell me to check if the connection is good, I don't already).
  Thank you

  Hey,.

  If you connect your laptop to external monitor and press the FN + F5 key combination what happens exactly? Pressing the FN + F5 key combination shows different options and you should test with external monitor only (not the clone image). If you work on external monitor doesn't do this work?

  In addition, you must connect the devices before starting their.

  Also, take a look in the BIOS and try to load the default settings. Make sure that that the HDMI cable is connected before starting Windows and check the status again.

  By the way: what operating system are you using exactly?

• Tecra S2 - resolution for external monitor on NVIDIA GeForce Go 6600

  Hello! I'm new here...

  I have a Tecra S2 with Windows XP SP2 and a NVIDIA GeForce Go 6600 graphics card. Internal (laptop screen) resolution is 1024 x 768. His job very well. But I work with an external VGA monitor with function "DualView". It is a Samsung Syncmaster 940N.

  CA? s all OK (19 ", resolution 1280 x 1024), with my new Samsng Syncmaster 203 b monitor do not work: the native resolution of the external display is 1400 x 1050, but the maximum available resolution is 1280 x 1024. And so, with resolution 1280 x 1024, will cause the image on the external monitor and text is not clear.

  I can't set the resolution 1400 x 1050 via Panel control, or through NVIDIA-menu.
  Graphics card drivers are updated to the latest version on the Toshiba site. NVIDIA GeForce Go 6600 graphics card is supported to my Syncmaster 203 b monitor.
  Maximum resolution of video output from NVIDIA GeForce Go 6600 is superior as a 1400 x 1050.
  I need to use this new monitor, can you help me?
  Thanks in advance!

  Unfortunately, the Tecra S2 is not able to display the resolution 1400 x 1050.
  Here are the resolutions that you can use.

  Support Resolution/Color (CRT)
  16-bit/32-bit 640 x 480 (function CRT) color
  800 x 600 16-bit/32-bit colors (according to the CRT)
  1024 x 768 16-bit/32-bit colors (according to the CRT)
  16-bit/32-bit 1280 x 1024 (function CRT) color
  1400 x 1050 n/d
  1600 x 1200 16-bit/32-bit colors (according to the CRT)
  1920 x 1440 16-bit/32-bit colors (according to the CRT)
  16-bit/32-bit 2048 x 1536 (function CRT) color

  Can you find a better but not official driver here: http://www.laptopvideo2go.com/enhancer

• Satellite U305: can't watch video on the external monitor on Vista with Dynadock

  Hi mates,

  I have a Satellite U305 running Windows Vista, I also bought a VGA Dynadock with HP 20 "external monitor.

  I have uppdated all Dynadock readers (Audio, video, etc.) to the latest version, but DVD-video or MPEG video recorded with my camera is not possible to look at the monitor extended that in the main screen (laptop computer monitor).

  For example, my DVD Toshiba drive works normally on the laptop monitor but when I transfer window extended monitor, Toshiba DVD Player stops to work.
  Video does not work on the extended screen.

  Is this OK or I did something wrong configuration? Is this a bug? If this is a bug, how to fix this bug?

  I'm you worry because I plug a large external monitor to watch a few movies that I can't watch it.

  Thanks in advance for your help.

  Nilton

  I agree with the snipe of the user. The dynadock is simply not designed to transfer the enormous amount of data that accumulate to watch movies on DVD.
  The USB ports are simply not designed for this

• Dynadock: set up for external monitors only in Windows XP

  We have a number of different laptops Toshiba dynadock DVI running Windows XP SP3 and dynadock 2.3 c with the video driver 4.5.14974.0.

  They all work very well, exactly as planned, except that the majority of users want to use with the external monitor only.

  We are currently their execution in mirror mode because the split screen extended mode is not necessary which requires the external monitor at the same resolution as the screen internal.

  All laptops have screens internal standard WXGA 1280 x 800, but find an external 19 "monitor that supports this resolution is a real problem with most being WXGA + 1440 x 900.

  I found a 22 "monitor is going to do, but the image is not very strong, probably because its native resolution is WSXGA + 1680 x 1050 and are also just a little more expensive.

  I found a document on the Web from Toshiba site we (Document ID: 98082393) that details how to display only the external monitor, probably with the help of whatever the external monitor can manage the resolution which would be perfect, except that it only works with Windows Vista.

  If someone has found a way to do this with Windows XP, I tried following the instructions of Vista, but I am unable to set the external monitor as primary display? Toshiba are working on a new video driver that will support this configuration?

  Sounds a little crazy for me because this is how the majority of the standard docking stations is used and many companies also have a significant deployment aspect 4:3 or 5:4 screens that obviously don't work well with laptops widescreen in mirror mode.

  Our users are currently using XGA 1024 x 768 in mirror mode which, on a big screen is stretched and defeats the main reason for having a large screen. We are the only ones having this problem or are we missing something obvious?

  Thanks to anyone with a useful suggestion.

  Hello

  from this site, you can download and install the latest software to display link:

  http://www.DisplayLink.com/support/downloads.html

  Best regards

• Video output for PXI embedded real-time?

  I plan to buy a controller PXI real-time Embedded for security monitoring.

  Is it possible to use the video output of a controller PXI running RTOS to display a LabVIEW RT application messages? According to the literature, it seems that the use of the video output is more possible for Controllers PXI running Windows XP.

  Is there a specific application with LabVIEW RT?

  Thanx.

  H.L.

  Well, it works using the IMAQ RT video Out VI: images are displayed properly via the video output of the RTOS PXI controller running.

  Thanx.

• Refresh rate of Quadro NVS 140 for external monitor

  I absolutely have to change on my external monitor refresh rate. I dropped the laptop this morning and broke the LCD screen, so I plugged an old maryvonne 17F3. I can't change the refresh rate and it flickers badly. Technical support eMachines stated that the refresh rate is controlled by the video card and that no driver is required for their monitor (as they have not first: smileysurprised :).) So how can I change the refresh rate? I have the latest Dell drivers for my 830 latitude.

  Thank you.

  
  

• Satellite Pro L360-14F - cannot play videos on the external monitor

  Toshiba Satellite Pro L360-14F
  Video files as avi, flv, mp4 are played with SM-player etc on the screen of the laptop, but not on the external monitor attached.
  A newspaper there is the error message: MPlayer crashed by the bath OF CPU/FPU/RAM usage.

  Which may mean that?

  You already go to the external display by using the FN + F5 keys?
  To do this.

  In addition, you must go first to the external screen and then you need to start the windows media player or other video player.

  I advise to use the VLC Player. It s free fro and plays most of the files

• Satellite Pro U400 - How can I get the native screen resolution for external monitor?

  I have a samsung syncmaster external screen connected to a Satellite Pro U400.

  The resolution of the screen goes up to 1280 etc. but the minimum samsung is 1440 x 920 (ish I forgot).
  How can I get the samsung to display full screen expanded to save my eyes of the realativively small screen internal?

  Hello!

  Have you tried to update the display on your laptop driver? Check the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?
  And what operating system are you using? Have you installed all Windows updates?

  For external LCD, monitors, you must set the screen refresh rate of 60 Hz.
  And if you want to change the resolution of the screen, you must select the second monitor in the graphics options on Windows.

  Good bye