Windows 7 automatically wakes from sleep mode

Similar Questions

• Reference windows xp Dell does not wake from sleep mode

  I am running XP service pack 3. When I try to wake up computer sleep mode orange light flashes but will not start. I hard reboot - sometimes the work - sometimes not. Sometimes he began alone. It is an intermittent problem.

  Hello

  Try the procedure described in the following article and check the status of the issue.

  Solve problems to wake the computer from sleep mode.

  http://support.Microsoft.com/kb/266283

• USB-232/4 causes Windows hang when wake from sleep

  I have a problem of resumption of the functioning of the laptop that follows "sleep" or "hibernate".

  With the connected USB-232/4, the computer does not return the Windows normally.  The display does not return (without backlight or external video output), but the LED indicators (bluetooth, disc, power, etc.) appear normal.  When I remove the USB from the USB-232/4, the display reverts immediately to the State before the mode 'sleep' activated.  Tried all 3 USB ports - all the same behavior.  No index by using the event viewer.

  Win 7 (64 bit)

  Series NI 3.7, NEITHER VISA NOR spy 2.7.2 5.0.2 MAX 4.8

  Serial port assignments seem to be OK:

  Port 1 - com15

  2 port - com9

  Port 3 - com16

  Port 4 - com8

  Any suggestions on the next steps to solve this problem?

  Thanks in advance.

  Solved the problem!

  The BIOS has a setting in the section advanced to Wake Up capability.  Compatible USB S3 Wake.  Now, the USB-232/4 is powered over the recovery of the standby mode.  When this feature is disabled, the USB-232/4 light not upon resuming from sleep mode and probably hung up the pilot, preventing a normal recovery.

• Monitor intermittently do not wake from sleep mode

  I have a new Pavilion 500 - 205t Windows 7 Desktop (two weeks).  Two days earlier, after the computer is in mode 'sleep', the computer would wake up, but the screen would not.  I contacted HP Support and they said not to put the computer in mode 'sleep', but to turn it off instead.  They said that the computer could accumulate a static charge which could prevent the monitor to wake up from sleep mode.  Their solution was to force a shutdown by pressing the power switch, unplug at the back of the Tower, by pressing the power switch for 20 seconds, plug everything back in and then turn on the computer.  The monitor worked correctly then wake up from sleep mode.  For the last two days, the computer would wake properly from sleep mode.  Today, the same thing happens again.  This time, I turned off the computer and then he turned back to (without unplugging everything) and the monitor worked correctly.

  Here's my question:

  Is it really a static problem? (It has been cold and dry here for several weeks and static is high)  Or I have a hardware problem or software that needs to be fixed?  Thank you for your time.

  I think I found the solution to this problem for my computer.  I changed the settings for sleep or sleep 'Hybrid' or 'Hibernate' is allowed.  Since then, I have not experienced the problem.  I also changed what does the power button, so that when I press the power button, the computer shuts down normally.  This prevents a "forced" shutdown if the problem happens again.

  Thanks again Bill, for your time.  I mark this problem is resolved.

• Laptop with Windows 7 not waking from sleep mode-impossible to repair the files

  My laptop has been not wake sleep for the last days. I think it may have something to do with a recent update. I ran scan SFC who originally gave me the error "Windows resource protection could not perform the requested operation." After using "chkdsk /f/r" the SFC scan was able to complete and it finds corrupted files. Here's what she has (don't know if files below are the same):

  2015-02-24 22:37:35, CSI Info 0000010b transaction [SR] beginning verify and repair

  2015-02-24 22:37:47, Info CSI 0000010 d [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-02-24 22:37:57, CSI Info 0000011a [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-02-24 22:37:57, CSI Info 0000011b [SR] this element is referenced by [l:150 {75}] "' Package_2_for_KB2506212 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.2.2506212 - 4_neutral_GDR" "
  2015-02-24 22:37:57, CSI Info 0000011e [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\windows\System32"\[l:20{10}]"Mfc42u.dll '; source file in the store is also corrupted

  2015-02-24 22:44:04, CSI Info 000001e5 transaction [SR] beginning verify and repair
  2015-02-24 22:44:07, 000001e7 CSI Info [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-02-24 22:44:07, 000001e9 CSI Info [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-02-24 22:44:07, 000001ea CSI Info [SR] this element is referenced by [l:150 {75}] "' Package_2_for_KB2506212 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.2.2506212 - 4_neutral_GDR" "
  2015-02-24 22:44:07, 000001ed CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\windows\System32"\[l:20{10}]"Mfc42u.dll '; source file in the store is also corrupted

  Any help would be great!

  Hi Esque,

  Thank you for the information.

  Please let us know if you have followed the troubleshooting procedures provided in the response ofVitoux K replied on 6 March 2014. (given in my previous post)

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/unable-to-wake-the-computer-from-sleep-mode/6054e168-6f56-43A9-a8c1-5a01e9a288fc

  If the problem persists, suggestions, please follow the link above and let us know the results.

• Windows 7 not waking from sleep mode

  Hello

  Lately, my DELL Inspiron 580 (Windows Home Basic) caused problems when I try to take out the "sleep mode".

  The symptoms are:

  * Moving the mouse, the LED monitor and Tower remain 'orange '.

  * When I press a key on the keyboard, the Tower starts to emit a higher than normal Purring noise level, it seems to be the fan, but I'm not sure. Monitor LED lights too but shortly after, the monitor switches to "energy saving" mode and doesn't. The Tower continues to emit "fan noise" and its LED remains white, but it does not start, or so it seems that the monitor remains dark.

  * In this State, if the Menu button on the Dell monitor is presses pressed, it flashes a message indicating that no signals are received from the PC.

  * If I turn off the Tower, the Tower power button, and try a bit later, the PC starts, but after a few attempts.

  I would be grateful to receive advice and suggestions.

  Aksa8

  Hello Aksa,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur for the following reasons:

  -Powers are damaged or incorrect.
  -BIOS reduces power to the port to which the input device is connected.
  -Point keyboard in Control Panel is not configured to wake the computer when you press a key on the keyboard.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter of power and control.
  Reference:
  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft Knowledge base article and check the issue.
  Reference:
  The problems of wake the computer from sleep mode
  http://Support2.Microsoft.com/kb/266283

  Important notes:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  Information with dubbing:
  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Satellite L750 - does not wake from sleep mode

  Hello

  I just bought a Satellite L750 and he didn't wake up from sleep mode. I force with button stop / stop each time in switching mode 'sleep'.

  Any ideas?

  Are you using the original pre-installed OS that you got with your laptop?
  Have you noticed the same problem with the hibernation mode?

  Did you install additional software?

• Computer constantly wakes from Sleep Mode

  I have a new PC HP Pavilion Elite M9450f waking up constantly from Sleep Mode, even if no one is at the computer or even in the bathroom.

  Sometimes it will stay mode standby for a few seconds and other times, it can stay in this mode for 10-15 minutes, but he still wakes up mode standby by itself.

  I would appreciate any advice you can give me for this problem.

  More than likely, this is your internet connection, it to wake up.  I hope that someone will jump in and explain better than me how to turn off the wake of the lan setting.

• CS5 frozen when iMac wakes from sleep mode

  This problem just started, and I don't know if that's a problem INDD or Finder. When I wake my computer from sleep mode and try to access the INDD, I can't. I click on the application icon in the Dock and it will not come to the front. All my other apps will be. I have to force quit smoking INDDD every time, and then reopen it. It is if I have a document open or not. I tried to zap the PRAM and closing, unplugging everything and starting up but none of those who have helped. Any tips or ideas of what could be wrong?

  Best to post the actual URL. I guess it's: http://pastebin.com/raw.php?i=d6TgEEMv.

  In any case, the two diagnoses are quite revealing. For after the accident report:

  Thread 0 Crashed:  Main Thread  Dispatch queue: com.apple.main-thread
  0   libSystem.B.dylib                  0x96475aa2 __semwait_signal + 10
  1   libSystem.B.dylib                  0x9647575e _pthread_cond_wait + 1191
  2   libSystem.B.dylib                  0x964773f8 pthread_cond_wait$UNIX2003 + 73
  3   ...extensis.cpp-core-framework     0x2552e640 GCondition::Wait() + 48
  4   ...extensis.cpp-core-framework     0x255d1e6a GThread::StopThread(bool) + 214
  5   ...extensis.cpp-core-framework     0x255d36d1 GThread::~GThread() + 45
  6   ...extensis.cpp-core-framework     0x25555d4e GIPCClient::~GIPCClient() + 1214
  7   ....ExtensisFontManagement.sdk     0x25a99854 GAgentIF_IPC_Impl::~GAgentIF_IPC_Impl() + 34
  8   ....ExtensisFontManagement.sdk     0x25a98b5b GAgentIF::~GAgentIF() + 113
  9   ....ExtensisFontManagement.sdk     0x25823b42 boost::detail::sp_counted_impl_p::dispose() + 24
  10  ...extensis.cpp-core-framework     0x2552ad9f boost::detail::sp_counted_base::release() + 37
  11  ....ExtensisFontManagement.sdk     0x25823cd5 void boost::shared_ptr::reset(GAgentIF*) + 79
  12  ....ExtensisFontManagement.sdk     0x2581dacb GMystiqueSdk::CreateAgentIF(boost::shared_ptr&, unsigned long) + 95
  13  ....ExtensisFontManagement.sdk     0x257b03d3 GMystiqueConfig::GetRunningAgentProductMode(GMystiqueConfig::EProductMode&) + 121
  14  ....ExtensisFontManagement.sdk     0x257b72ca GMystiqueConfig::GetIsAgentRunningByProductMode(GMystiqueConfig::EProductMode, bool&) + 746
  15  ....ExtensisFontManagement.sdk     0x257b8635 GMystiqueConfig::GetIsCoreAgentProcessRunning(bool&) + 33
  16  ...Management.plugin-interface     0x25388601 GetIsCoreAgentProcessRunning + 28
  17  ...is.AutoActivationPlugin.ID7     0x24beac0c CoreAgentInterface::ProcessNotifications() + 232
  18  ...is.AutoActivationPlugin.ID7     0x24bdab16 SuitcaseIdleTask::RunTask(unsigned long, IdleTimer*) + 710
  19  ...adobe.InDesign.AppFramework     0x1a75ff85 GetPlugIn + 242005
  20  ...adobe.InDesign.AppFramework     0x1a760eac GetPlugIn + 245884
  21  ...adobe.InDesign.AppFramework     0x1a702e78 0x1a700000 + 11896
  22  ...adobe.InDesign.AppFramework     0x1a7285fa GetPlugIn + 14282
  23  com.adobe.InDesign                 0x000028ab main + 187
  24  com.adobe.InDesign                 0x000027c6 start + 54
  

  This is the plugin Extensis Suitcase Fusion self-actuation!

  So, disable it to confirm. Make sure that you use the latest version and if so, take up with Extensis. I think they have a free support on their web site.

  In addition, you must update InDesign to 7.0.4 you run 7.0.3 and there were a lot of bugs.

• Ssatellite U300 - 13K does not wake from sleep mode

  He has had this problem with windows vista and I decided to switch to Win7, but it still has the same problem.
  He falls asleep, but then don't wake up no matter what I click.

  Can you help fix?
  Thank you

  How set you the mode standby?
  The power LED flashes when the laptop is in sleep mode?

• Equium A60 will not wake from sleep mode

  Hello

  I have an Equium A60, my laptop is entered 'sleep' mode and when I pressed the button that flashes orange that nothing happened, after trying a few times still nothing happened.

  I decided to take out the battery to try to recitify the problem. Unfortunately no power now lights. All of the suggestions.

  Hello

  Strange.
  You said, you have removed the battery, but you left it for several times?
  Disconnect the power adapter and remove the battery from the laptop. Wait 15 to 20 minutes, and together the two sides again to the laptop!

  Please post again if the laptop works again!

  Good luck

• Vista will not wake from sleep mode

  I have Vista SP2, Intel Quad Core processor, 4 GB RAM, 64-bit. I have never been able to use "sleep" mode and am forced to restart the computer. Checked and unchecked parameters in Manager devices, power management, etc. Have not found a solution through the web, Tech Web sites or Microsoft Web sites. What I found is that it is an unsolved problem with Vista and all over the web with other users having the same problem. Hope I'm wrong. Help, please.

  I have Vista SP2, Intel Quad Core processor, 4 GB RAM, 64-bit. I have never been able to use "sleep" mode and am forced to restart the computer. Checked and unchecked parameters in Manager devices, power management, etc. Have not found a solution through the web, Tech Web sites or Microsoft Web sites. What I found is that it is an unsolved problem with Vista and all over the web with other users having the same problem. Hope I'm wrong. Help, please.

  Have you tried...
  Start button > Control Panel > Classic view > Power Options > go to Plan you selected, click on change plan settings > click on change advanced power settings > on this new window, use the cursor, scroll down to multimedia settings, then click on the + sign in front of him. Click on the + sign in front when sharing media > change BOTH the "on battery" and "Plug-in" allow the computer to sleep. > click OK

  Now see if the computer will go to sleep mode.

  t-4-2

• Prevention of Wake from sleep Modes

  When I finish using my computer for the day, I put it in hibernation. Yet, the next morning, I find he woke in the night, usually shortly after midnight (according to the event viewer, which gives "Unknown" as the cause) and is always awake.  I opened the Device Manager and all unchecked boxes labeled "allow this device to wake the computer", but it still happens. How can I make sure that he wakes up only when I press the power button?

  Note: I am running Vista SP3 on a HP s3321p computer.

  There is no Vista SP3.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info on the link above; and also read the 'related links '.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite L850-A635 does not wake from sleep mode

  purchase date: June 6, 2012

  When I put it in mode 'sleep', he goes to sleep, but when I start, it awakens me unless I have remove the battery, put in place and turn it back on.

  Please advise me how I can solve this problem

  Hello

  What happens if you press the power button / stop 4 sec long?

  Please run a HARD drive recovery procedure: (F8, fix my computer-> Toshiba HDD recovery)
  Don't install any software, but test the "sleep mode" immediately after that drive HARD recovery is completed.

• HP ProBook s 4540 - does not wake from sleep mode

  I tried a bit of everything that I could find on the Internet or what I know. Reduces the problem to the switchable graphics. Seams like WIndows cannot successfully choose what gpu. When I try to reactivate the screen is empty if the hdd led flashes and when the keys on the keyboard I can hear windows sounds. I have the latest drivers from Intel and AMD. All the updates of windows, all the drivers and software on the site need driver of HP. Double checked for the correct version, 64 bit etc etc. I tried to turn off windows hibernation, I tried to do hard reset, I tried almost all the power management, associate of hp of power, switchable graphics options including bios (I can only enable or disable graphic switchale) (for some reason I can't choose a fixed GPU?) I also checked for updates via the HP SUPPORT assistant. I tried save mode. I went through all the options of windows, I think. Tried the plans of different powers, ati catalyst (worst piece of sowtware never) options, etc. Nothing seams to work. I would appreciate any help from HP.

  I not unhooked old drivers with CCC (Control Panel-> Add) or remove programs-> AMD Catalyst Install Manager-> full delete after installation;

  My computer - right click - Properties-System - Device Manager - graphics card

  Amd Mobility Radeon HD 7500/7600 Series (Microsoft Corporation - WDDM 1.2) + yellow exclamation point

  Right click - Update driver and select new driver in the folder of the driver Amd (AMD C :-> AMD_Catalyst_13.6_Mobility_Beta-> packages-> drivers-> screen-> W86A_INF)...

  CCC not installed but it works great [cinebench 32fps] and solved problem of mode of sleeping

  If you are installing error cinebench or aida64-online

  (1) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\VC12RTx64\vcredist_x64

  (2) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\VC12RTx86\vcredist_x86

  If windows experince index error "windows media encoding/decoding performance.

  (1) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\WMVDecoder64

  (2) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\WMVDecoder