HP pavallion 1312TU G6: after its installation 8.1 victory become less HP pavallion 1312TU G6

Similar Questions

• How do you run a stand-alone program after its installation on the CD - RW disc

  How do you run a stand-alone program after its installation on the CD - RW disc

  How do you run a stand-alone program after its installation on the CD - RW disc

  Programs are not * install * to a CDRW at least that the CDRW is seen as a disc using the writing software to package such as DirectCD (Roxio) or OnCD (Nero). A disk used with writing software by packages cannot be used on any PC.

  Files are copied to a CD - RW for storage and retrieval. If the program installs, it install in general in C:\Program Files or similar and often drop files into \Windows and other places, too.

  -steve

• Update every night 37.0a1 is offered several times after its installation.

  My nightly classes is 37.0a1. New updates to say the same thing and when I install it in any case, it fails or the same update is offered again.

  Night and development paths Aurora gets check-ins almost every day so it gets an update from each of these days. Sometimes on occasion there is a respin in which, if you him si vous le manquez Miss will do an update full instead of partial small next time you get an update.

  If you want to be a tester every night so you can spend time in http://forums.mozillazine.org/viewforum.php?f=23 where are the testers.

• Devices drivers not showing no not after its installation. How can I show different pilot locations when looking at a workstation?

  I installed a hard drive of 250 GB and once he showed me that it is installed and that the device is administrable via Control Panel, it cannot be opened or read when you browse the file directory. How he finds out, open it and browse to the location of the devce driver if she does not?

  Hi Anderson5903,

  1. What is the brand and model of the hard drive?
  2. How is the 250 GB drive connected, it's via the USB port or internal drive?
  3. it worked on other computers?
        
  See the links below for help on Device Manager.
          
  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager
             
  What is Device Manager?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-Device-Manager 
                
  I also suggest you to check in the disk management for the hard drive and also check if it has a drive letter assigned, if the drive letter is not assigned, then you can assign a drive letter and check the issue.
            
  To change drive letter assignments in Windows 7, follow these steps:
                
  a. log in the computer as an administrator.
  b. Insert a disk in the removable drive.
  c. Click Start, right-click computer and then click on manage.
  d. click on disk management.
  e. right-click the partition, logical drive or volume that you want to change and then click on change drive letter and paths.
  f. click on the removable drive, click it, click on change, click the drive letter that you want to use, and then click OK.
          
  For more information, visit this link below:
            
  Change, add, or remove a drive letter
  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Cannot find creative cloud on MAC after the installation process is completed.

  I installed creative cloud, but could not find it on my MAC after its installation process.

  Does anyone have the solution to this problem?

  Hello

  Please check the Applications folder in the folder Adobe Creative cloud.

  In the case where you are unable to find it, please try to download the installer according to the suggestion provided by Justin.

  Kind regards

  Sheena

• Update for windows xp (kb976323) security - is always available for installation even after its been installed

  Whenever I turn on the automatic updates-"Notify me but don't automatically download or install their ' update for windows xp (kb976323) security always even comes after the installation. System: xp pro version 2002 sp3

  If it is listed in Add/Remove Programs, it is installed.

  Follow these steps:

  1. stop the automatic updates service:

  Start > run > services.msc (enter) > [OK]

  Double-click Automatic Updates > click Stop

  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > %windir%\SoftwareDistribution (enter) > [OK]

  Open the download folder and delete its contents

  Close the window.

  3. go to the Windows Update Web site. Select CUSTOM and allow the analysis to be performed. Uncheck the box/deselect KB976323 and hide ("don't show me this update").

  4. start the automatic updates service:

  Start > run > services.msc (enter) > [OK]

  Double-click Automatic Updates > click Start

  (Starting the service will take a moment)

  • See the section "How to get help" of http://support.microsoft.com/kb/976323

    For individuals, free support is available by calling 1-866-PCSAFETY (1-866-727-2338; 1-866-234-6020 or to the United States and the Canada 1-800-936-5700) or by contacting your local Microsoft subsidiary.  There is no charge for support calls that are associated with security updates.  When you call, clearly state that your problem is related to a security update and cite number of KB of the update (e.g. KB976323).

    Or you can...

    Start a Windows Update support incident email request for free
    https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

    Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

  UTC/GMT is 06:57 Saturday, may 5, 2012

• The screen of my Sony Vaio laptop VPCS11FM completely lost its brightness after the installation of Windows 8. What should do?

  I installed upgrading W7 W8. Already during the final phase of installation, the screen of my Sony Vaio laptop VPCS11FM completely lost its brightness after the installation of Windows 8. I tried the settings of brightness through the hardware buttons and in energy savings, but it remained the same. What should do? Karl

  Looking for a display updated sony driver.   Its always a good idea to do so during the updating of the OSs.

• After the installation of Photoshop its showing that no internet cnnection or time is incorect but two things are true can u please tell me what to do?

  After the installation of Photoshop its showing that no internet cnnection or time is incorect but two things are true can u please tell me what to do?

  Hello

  Please see solve common problems of activation and deactivation of creative cloud.

  Hope that helps!

  Kind regards

  Sheena

• Can you build a new version of an exe without having to rebuild its installer later?

  I'm currently testing an exe LabVIEW-built on a PC without installed LabVIEW. Whenever I go back to the development PC to fix a bug / change something, and then rebuild the executable file, it seems that I must also rebuild its installer which takes considerable time.

  Is it possible to rebuild an executable without having to rebuild its installer? Or a way to tell the installation program that he didn't need to be completely rebuilt, but rather just has to look at the new executable?

  After writing this, I realized it probably isn't a way to do it, but it's worth a shot.

  Christian.

  If you remove all the additional installation programs of your build spec, you should end up with a fairly compact to build installer.

  I usually a specification of construction to complete installation, then a spec to build for the patch install.  When I make just a small change and know that the application will be distributed only on a computer that already has the EXE, I just rebuild the hotfix installation program.

  For major releases, I will rebuild the full installer.

• Mathcad 14 will not work after successful installation

  I have a new laptop and installed as the first software MathCad.  Installation meets with success.  Congratulations after the installation of liscence.  When I open the mathcad 14 in Start menu, the message...  Mathcad has stopped working correctly appears.  It's software I have intalled on XP, so I think that the disc I install is correct.  PTC has provided me with a new license for the new machine (I sent them the hard drive id and they provided new license).  Sometimes, I see a list of unregistered .ocx and .dll files.  I tried to launch the privileges to administrator and re-install/repair.  Same results.  Any ideas?

  Automatic reports have been sent to Microsoft.

  Having spent the last 48 hours trying to solve this problem of talking to TPC for two hours, I was finally able to reinstall the program successfully.  If you get an error message during the installation which results in error 1305.Error (i.e. check that the lib.tar file exists and that you can access), there is a problem with the length of the filepath name.  In addition, it might be a problem with the installation of MSXML 4.0.   Here are the steps I took:

  (1) I created a folder in my C: / drive with a very short name (i.e. two letters).
  (2) I downloaded the file CD_English.exe of the site Web of PTC for Mathcad 14.0.  It is under its support page.  This is the version put out on listening to Mathcad 14.0.  I extracted all the files in the new folder of file with a short name.
  (3) after downloading, I opened the PreReq file and clicked on all the files listed for install.  When you install msxml, go through the Setup Wizard and click on modify.  Make sure that the XML SDK option is checked.  Complete the installation.
  4) go to the setup.exe file and install Mathcad.
  I hope this will work!

• BlackBerry JDE fails to start after the installation of Simulator Tour 9630

  I use JDE 4.7.0 on Win XP + a bunch of simulators.

  After the Tour 9630 Simulator (v 4.7.1.40), I installed the JDE does not start.

  I tried to run ide.bat via command line - it does not give error messages.

  I tried to reinstall my JDE (with deletion of the dir of installation in order to remove settings from JDE is) - it did not help.

  I am now able to run the JDE again after that I uninstalled the Tour 9630 Simulator. But I really need this Simulator because I develop an application for the round.

  What could be the problem?

  Thanks to Marc post here the solution I managed to solve this problem.

  The solution is:

  1. install the Simulator
  2. Make a copy of its installation directory
  3. uninstall the Simulator
  4. manually create a new Simulator in JDE by using the copy of the directory

• After the installation of the OC windows 7 audio driver cannot be installed

  My computer is Toshiba satellite A40-s270 is designed for Windows XP after the installation of the co win 7 the sound is not coming on the icon of speakes I see X in red. What can I do to get the sound

  [Moved from comments]

  Hi Dr.Kamuzora,

  There is no Windows 7 drivers for your model. You can see the following link for more details:

  http://support.Toshiba.com/support/modelHome?FREETEXT=556028

  Windows 7 drivers are not available, first of all, let's try to uninstall their current card drivers and restart the computer so that Windows will try to install the base for your sound card drivers.

  Refer to the procedure below:
  

  a. press Windows key + R, type devmgmt.msc, press on ENTRY.

  b. in Manager devices, go to the audio, video controller and game, expand it.

  c. right-click on its index map, click on uninstall and click Ok.

  d. restart the computer.

  If the sound does not work, we will try to install the XP drivers (from the link above) in compatibility mode.

  Refer to this link: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the problem persists, I suggest you contact Toshiba support:

  http://forums.Toshiba.com/T5/computer-troubleshooting/CT-p/cat_troubleshoot

  Hope the above information is helpful.

• Problem with the Arcsoft webcam Companion 4 after the installation of windows 8

  I have VPCCB390X laptop Vaio from Sony. I have upgraded from windows 7 to windows 8. My web cam worked very well after that installation for a day and now its shows an error "the last USB you connected is not recognized or bad boy" and I couldn't find any category of imaging devices in Device Manager. The webcam has become an unknown device. I tried to contact sony and microsoft, but none helped me. Microsoft says that drivers may be incompatible. I checked with the upgrade of Windows 8 assistant, and he noted that the companion of Arcsoft web cam is compatible with Windows 8. I tried to reinstall the software and drivers, but that did not help and the problem persists. Can I have a solution to this?

  Hello

  Check with the Sony Support, their drivers and documentation online and ask for their
  Forums about known problems. BIOS update, chipset of low level drivers and major
  embedded device drivers. If there is no version of Windows 8, try the latest versions of Windows 7.
  Do not forget to ASK Sony Support and in their forums, because there are likely to be known
  questions.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forums
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  ====================================================

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Microsoft - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ------------------------------------------------------------------------------------------------

  Translate Windows 7 to Windows 8 methods (there is little difference):

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to reload the drivers of the device and any camera (general control software
  included with the drivers and installed at the same time).

  Login as an administrator.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your
  System. For each driver in the list, additional useful information is displayed: load address
  of the driver, description, version, product name, company that created the driver, and
  more.
  http://www.NirSoft.NET/utils/DriverView.html

  To check system drivers manufacturer as replacements and camera manufacturer who are most
  current. Control Panel - device - Display Adapter Manager - note the brand and
  fill out the template tab of the driver for your card video - double-click - write down the
  the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
  certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
  stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if
  3rd party with their own software and drivers and the other main device drivers you
  a.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
  Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
  (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
  After each installation.

  Always check in the Device Manager - drivers tab to be sure the version you install
  actually arises. This is because some restore drivers before the most recent is installed
  (particularly that audio drivers) so install a driver - reboot - check is to be sure
  installed and repeat if necessary.

  Repeat BTW to the manufacturers - manufacturers of devices DO WORK DO NOT THEIR SCANNER-
  manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• DVD player stopped working after the installation of 12 items

  First, I loaded the disc DVD in the drive and tried several times to install 12 elements.  Whenever the program has been installed the computer would start flashing and the dvd drive may stop working. Every time I had to use a PIN to eject the DVD because it would not eject.  It worked well before its installation to 12 items. After that the program was finally installed dvd player worked.  But the program would be closed when you use it too often.  I finally just deleted the program of 12 items on my computer and install it on another system.  It's been a while since the abolition of the program from my computer. Tonight, I reinstalled the program Adobe 12 elements with the dvd drive works fine.  Trying to install the program, all loaded fine.  Then once more, the dvd drive eject nor does any work.  What happened several times with 12 elements of loading on my computer.  It is a real pain.  Now the DVD drive doesn't work, or eject.  Can someone help me out here?  It sucks. The other computer works fine.  It is a HP Pavilion, Windows 7 Home Premium system.

  Computer was off all night. Turned on this morning and the system works now.  I rebooted the system, at least six times last night with no result. I don't know what was different this morning, but everything seems to work.  So if it's not broken I will not try to fix it.  Thanks for posting. Dan

• After the installation of Sierra, websites follow me like crazy!  This has not happened before.  Why this is happening and what can I do to stop it?

  After the installation of Sierra, Web sites started to follow me like crazy!  This has not happened before.  Why this is happening and what can I do to stop it?

  What are your privacy settings in Safari preferences.