HP Pavilion 17-e030so USB problem

I recently downgraded to Windows 7 Professional. Everything works perfectly except the USB ports... Can not find the drivers for it. It's intel COREi5 inside the laptop.

Hello:

You need the usb driver 3, and I highly doubt that your graphics card is working (unless you have already read my solution to get the graphics card Radeon HD 8670 M to work on W7).

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118604_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

Here are the steps you need to get the graphics to work if you do not already...

1 install the Intel chipset driver and restart.

https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+ins...

2. install the Intel graphics driver and restart.

64-bit:

https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23714&lang=eng&OSVersion=Windows%207...

32 bits:

https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23713&lang=eng&OSVersion=Windows%207...

3. download and install MS .NET Framework 4.0.

http://www.Microsoft.com/en-US/Download/details.aspx?ID=17851

4. download and install the latest amd catalyst driver beta.

http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

Tags: Notebooks

Similar Questions

  • HP Pavilion g6-2342dx USB problem

    So I bought this laptop (HP Clubhouse g6-2342dx about 5 months ago and I liked it, except for the fact that he had windows 8) So I decided to downgrade to windows 7. Everything was fine, all the drivers were working. But I noticed that the 2 USB ports on the left (USB 3.0) on the computer were not working. If you have plugged a mouse, no action happen. Not even a light would appear in the mouse either. They both used to work when windows 8 has been installed.

    I noticed that when the computer starts everything first, you see a bright light upward in mice. The last light until I see the 'Welcome' screen in windows 7. So that means to me that it is still functional. Any help please? Thank you.

    Hello:

    Download and install the amd chipset drivers and restart.  You want the first file on the Web page.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  • Network of HP Pavilion G6-2244NR, usb, wireless problems after downgrade to Windows 7

    HP Pavilion G6-2244NR network problems.  Okay, so I have a G6-2244NR I had to downgrade to Windows 7 Pro 64 (SP1), due to software compatibility issues.  Install was initially conducted on UEFI, GPT, wiped 8 and started from scratch with Legacy support MBR.  Installation went perfectly well.  However, I start in 7 and I get the network icon showing a red X.  I then go into Manager and note that there is no network listed devices.  Instead, I have 8 devices listed under "Other devices" with yellow exclamations by each of them.  This includes the Bluetooth controller, the network, a PCI device controller, Ethernet controller, SM Bus controller, two USB controllers and an "unknown device".  Bluetooth ID is ven_1814 & dev 3298, Ethernet ID PCI\VEN_10EC & DEV_8136 and so on.  I downloaded the drivers on the wazoo.  I think that I have updated the chipset but know not so straight updates chipset (catalyst 12.6).  Still no luck.  Whenever I have try and install what I think are good drivers I get the error "device works not ' on the LAN card.  Can anyone help?

    A Wi - Fi connection

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-111782-1&mode=4&IDX=1

    Ethernet

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  • USB problem-"USB device not recognized".

    Original title: USB problem

    I have a problem when I connect my nokia mobile to my pc via USB cable there is a display of msg of error "USB device not recognized.how to solve this problem? I tried all reboot pc, reconnect the device, format XP and reinstall.last night I was using a mobile navigation correctly with the same device same system same cable.i have tried driver re install but not fixed yet.i have Windows XP 3 intel p4.please help.

    Hello

    1. Are you having the same problem if you connect a drive flash or any other device?
    2. Have you tried plugging in Nokia mobile on another computer?
    3. Have you tried plugging it into different USB ports?

    I suggest you send more information to help you better.

    You can also refer to:

    A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive.

    http://support.Microsoft.com/kb/925196

    USB port may stop working after you remove or insert a USB device.

    http://support.Microsoft.com/kb/817900

    .

  • Can I top up my Pavilion laptop via USB 2.0?

    Can I top up my Pavilion laptop via USB 2.0?

    The simple answer is no.

    The USB ports are not connected to this circuit.

  • HP Pavilion dv6 - 6123cl: HP Pavilion dv6 - 6123cl - USB driver problems

    Hi all

    I tried to find a way to solve the problem I encounter without success, so I decided to join this community and hope that someone else came across something similar and has been able to solve.

    I have two identical HP notebook computers (HP Pavilion dv6 - 6123cl) and both of these computers have exactly the same problem. After you have reinstalled Windows 7 for some reason any USB ports on the left side of the laptop are not recognized by Windows, leaving me with only 2 USB ports available. I downloaded and installed all the official drivers from the HP site but the problem remains still. Device Manager will not find the drivers and it drives me crazy because all the USB ports on both computers worked very well so far. What am I supposed to do?

    Any help or suggestion is highly appreciated.

    You are the very welcome.

    Download and install both of these drivers and restart.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5098226&swItemId=ob_118744_1&swEnvOid=4058

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5098226&swItemId=ob_123787_1&swEnvOid=4058

    Do you need the SMBus Controller driver too?

    If so, see if it works...

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_127691_1

  • HP Pavilion 15 - 055sm usb 3.0 problem

    Hello!

    I recently bought the Pavilion 15 - 055sm and I installed win 7 64 bit, everything works ok except my usb 3.0 ports.

    I tried to install several drivers but nothing helped. Last I tried is the expandable controller from intel, but when I try to install I get a message "your computer is unresponsive to the minimum requirements of the system.

    Someone please help and thank you!

    Hello:

    First, install the AMD chipset driver and restart.  You want the file size of 49.7 MB download.

    http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

    Then download and install the drivers for the USB 3 ports to work both.

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417 & SP...

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417 & SP...

    If you need other drivers W7 laptop, please let me know which ones you need.

    After you have installed the chipset driver and rebooting, use this ethernet driver... a 3rd on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  • HP Pavilion dv6-6135dx USB 3.0 problems

    Recently bought this laptop, I like it, it works fine.

    I reformatted about the day that I got this laptop. However, I can't get USB 2 ports on the left side of the laptop to work, I guess it is the USB 3.0 ports. The two USB ports on the right side of the laptop work well, I guess they are USB 2.0 ports. It's probably missing drivers.

    I tried to download Renesas Electronics USB 3.0 host controller driverthe HP support Web site. It does not work. After installing and running the utility USB 3.0 host controller that it installs, a small dialog box appears which says 'not found USB 3.0 host controller '.

    In Device Manager, I have two devices that have yellow exclamation points. One is listed as Controller of Bus SM, the other is listed as unknown device. The hardware ID for those who are:

    SM Bus controller:

    PCI\VEN_1022 & DEV_780B & SUBSYS_358D103C & REV_13

    PCI\VEN_1022 & DEV_780B & SUBSYS_358D103C

    PCI\VEN_1022 & DEV_780B & CC_0C0500

    PCI\VEN_1022 & DEV_780B & CC_0C05

    Unknown device:

    USB\VID_138A & PID_0018 & REV_0078

    USB\VID_138A & PID_0018

    Windows Update cannot find something for these two. I also tried to manually select the following drivers for the unknown device and the unit still does not start:

    1. Renesas Electronics USB 3.0 Host Controller

    2. Renesas Electronics USB 3.0 Hub

    3. Renesas Electronics hub USB 3.0

    4. Renesas Electronics USB Hub

    Although I'm not too worried about the SM Bus controller, mainly because I have no idea what its purpose is, I suppose that the ports USB 3.0 is the unknown device because of the hardware ID. Help please!

    The problem is that HP is not labeled correctly pilots. USB 3.0 drivers they have under "Chipset" do NOT allow the ports under Windows 7 on the DV6-6135DX. I discovered this way lasts as well as others.

    I replaced the hard drive and decided to use a generic version of Windows 7 to avoid the HP bloatware. After installation, port USB3 drivers have not been installed and install the package of the chipset section has nothing. Then I found a thread at Notebookreview.com where someone told me where were the USB drivers.

    The drivers for the USB 3.0/chipset ports are rolled in the driver VIDEO package. After you have installed the package of video drivers, my USB 3.0 ports worked. I then installed a video driver up to date from the AMD website and I'm good to go.

    Nowhere on the HP driver page it mentions that USB 3.0 drivers are actually part of the package of video drivers. I had to find the info from a thread at Notebookreview.com. Do not this way. HP should be out pilots in 2 packages and put them in the appropriate section, or put some type of ticket in the chipset section on where the chipset drivers are really.

  • computer hp laptop pavilion g6 2314 - is problem in USB 3.0 (two ports)

    I've already installed windows 7 sp1 on "pavilion g6 2314 - is mobile" and installed all the drivers.

    but two USB3.0 ports on the left does not work

    It worked on windows 8, 8.1, but the problem in windows 7

    My currency manager

    I hope to solve this problem

    thnx,

    the problem is solved

    I installed this driver: Intel (R) _USB_3.0_eXtensible_Host_Controller_Driver.zip

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=21129

    and he solved

    Thank you

  • HP Pavilion 15-E007TU USB 3.0 problems

    Hello

    I have a computer laptop 15-e007tu and I have installed Windows 7 OS, but USB 3.0 ports do not work.

    Can you please do the necessary.

    Thanks in advance.

    Srikanth Nagula

    Hello

    Try the driver on this link.

    http://ftp.HP.com/pub/SoftPaq/sp55501-56000/sp55975.exe

    Kind regards

    DP - K

  • Pavilion S5-1204: USB Ports does not: Windows 7 HP Pavilion Slimline

    Hi all

    Yesterday all of a sudden the USB ports are not read.  I have cameras and use a data transfer cable or a card reader to transfer to the office.  Now they do not read.  Tried the front and back of the usb ports.   However, the optical mouse that uses a usb device works.   I don't understand how the mouse works and the purse strings of data transfer and the readers aren't.

    Win 7 64 bit

    HP Pavilion Slimline desktop computer

    Help!

    Update: I did troubleshoot a HP check and update driver.  The screen messages

    USB root hub: this device does not work correctly.

    The current tab:

    Generic USB Hub (6)

    1 port available

    Power required: 0mA

    Solved.

    I've narrowed the problem to the camera. Very strange. The camera will take pictures and display them on the screen. But something is happening internally where the image will not transmit or transfer it via a usb device.

    I have another device with a transfer device and it works. So it seems I have to buy a new digital camera. BTW, it is a Nikon S2800 - not recommended.

  • Pavilion 17-g192dx: USB Ports not recognized

    Hello

    I have a HP Pavilion 17-g192dx that's installed with Windows 10 factory. I decided to give the new operating system a go, but was overall very satisfied with his overall performance and updates of buggy. Not wanting to give up the new machine, I decided to bring it back and oldie but a goodie - Windows 7. I got a copy of Windows 7 Home Premium lying around so I gave a go and installed the operating system. I got the internet running successfully and in no time most of my drivers have been installed. The problem that I face now is that the old BONES will not work with my USB ports. I do not use a hub and have almost exauhsted the drivers for this Web site section. If someone wants to kindly point out how I could go about fixing this issue, any help would be much appreciated.

    I'm not as interested to get back to Windows 10. It is too slow for daily use (ma) and buggy.

    Thanks in advance!

    Hello:

    Download, unzip and run the file setup.exe from the link below...

    https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-Intel-C220-C610-chipset-family?product=65855

  • Pavilion 17-g113dx: USB hub does not work on Pavilion 17-g113dx after intallation of win 7

    Hi, I have a 17-g113dx Pavilion, which was originally to gain 10 on it, but I'm frustrated with it and installed win 7.  After the driver installation failed for the USB hub.  Is there a driver that is compatible with this machine and the operating system that I can download?  The hardware ID are listed below.  I have several other questions, but it is the largest.  Thank you.

    PCI\VEN_8086 & DEV_9CB1 & SUBSYS_8094103C & REV_03
    PCI\VEN_8086 & DEV_9CB1 & SUBSYS_8094103C
    PCI\VEN_8086 & DEV_9CB1 & CC_0C0330
    PCI\VEN_8086 & DEV_9CB1 & CC_0C03

    Hello:

    For the first unit, download and install the 2nd driver on the list from the link below.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

    For the 2nd device, install you the driver of USB3 has not ended.

    See if it works.  Download and unzip the driver Intel USB3 lasvegaswireman posted.  Do not run it.

    Go to Device Manager and click on the USB hub root of problem.

    Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and navigate to the Intel USB driver you have unzipped.

    Make sure that the include subfolders is selected and see if the pilot goes like this.

    Then restart the PC.

    The third device... you run the patch from the link below to activate the TPM on W7 2.0 device.

    https://support.Microsoft.com/en-us/KB/2920188

  • wlan USB problems

    I recently purchaced the RTL8188CU of LAN realtek wireless 802.11n USB 2.0 Network Adapter and I had running problem free for 3 days now, she broadcasts a ssid signal but I can't connect to the internet what if I installed and executed the program has made any changes to the settings and then he screwed up so I don't have I have complete reinstall the driver and software for him and he refuses to connect , only broadcast the SSID to the devices the. also, I put my computer to allow devices to connect and use his connections to get online and set up the usb adapter from the station to the AP mode when it was running, any recommendations on how I can fix this, or what Miss me to make it work

    EDTII

    When you request support, please provide the HP model name and/or product the full number of the computer in question. This information is necessary to examine the specifications of your hardware and provide relevant answers. Also provide the brands and model numbers of all other computers, routers, broadband modems, etc. that you are trying to connect to or from.

    In addition, Please rephrase your question/statement to clarify what it is you are trying to acccomplish.

    Example 1: I have Cox internet with a modem Motorola X 4321, X 1234 DLink wireless router and I want to connect my HP Pavilion p6666x to this wireless network.

    Example 2: I have Comcast internet with a modem of 4322 X from Motorola, a Netgear Y1233 router and a HP Pavilion p6666x connected to the router with a cable CAT5. I want to share my network connection p6666x using a RTL8188CU wireless 802.11n USB 2.0 Network LAN adapt an AP (access point).

    Please send Bravo

  • Pavilion slimline s3760in: usb ports and the Internet connection

    Hello

    I use my hp pavilion slimline s3760in pc for about five years. Recently my hard drive failed and I had to replace.

    Everything was going well until my pc stopped recognizing all the same usb ports in BIOS mode on many occasions (he only recognized usb keyboard sometimes). Finally I have reset factory. The Usb ports now generally work fine, but now when I connect to the internet, none of my browsers can disply any page, even other programs cannot connect to the internet, although it shows that I am connected to the internet.

    Is it a hardware problem or just windows?

    Hello again @vr46,

    Thank you for the updated information. I'm you provide a HP support document: Broadband Internet Connection to a dispute (Windows Vista), which has the troubleshooting steps you need to solve the problem you are now facing. I suggest that you take the time to go on the document and apply the suggested steps.

    Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a wonderful day!

Maybe you are looking for