HP pavilion 23 touchscreen smart all in a single pc23 h050 upgrade RAM

Similar Questions

• HP Pavilion - 27qe touch everything-i: HP Pavilion - 27qe touchscreen all-in-one PC Downgrade of Win10 of Win7 Pro 64 bit

  I ordered, from hp store-still in production, a HP Pavilion - 27qe touchscreen all-in-one.  There are 10 Windows.  I would come down to Win7 Pro 64-bit (I can buy a legal copy of win7 and do a clean install).  I understand that I would lose some features like the touch screen, but I really prefer Win7.  I'm looking for info on how to do this?  For example, where to find the proper drivers (determine which and where to download to), BIOS etc.  Drivers listed on hp for this computer are for Win10 only, there is no Win7 drivers listed.  Of course I'd first recovery disks Win10, where I always want to go to the Win10 or if Win7 is not working properly.

  Any info/help appreciated.  My wife and I share one our computer at home with Win7 on it.  Me, my wife and probably would be better to use Win7 we are used and as.

  Thank you...

  Thanks for the info WAWood.  I decided to nix the idea of decommissioning.  It would be too complicated, as you point out.  Have a good!

  I noticed that you have been very busy here.  Member for 2 months and almost 500 posts!  Thanks for you disseminate knowledge and activity here.

• Smart touch laptop: reset bios password for 15 touchscreen smart (cnd4422hxx)

  You try to reset the bios password but I could not. No idea what is the code for this?
  reset password bios for 15 touchscreen smart (cnd4422hxx)
  Thank you

  @David_dd

  You are welcome

  Enter: 46420306

  Kind regards

  DP - K

• HP Pavilion 23 touch screen all in one

  After I upgraded to Windows mytouchscreen does not work, when I look for the stylus and touch it says that I don't have, I tried to download

  Hello new @YOLIE80S,

  At this point, I would say we have all the drivers for your computer on Windows 8.1. I would like to have you go to the drivers page from PC Desktop HP Pavilion TouchSmart 23 - f217c all-in-one and start with the Chipset drivers. Once they are installed you should re - install ALL drivers for your computer.

  If the above does not work, we will have to back up, recover your computer to factory settings, run ALL the HP and Windows updates and try again Windows 8.1 update. To save your personal information and ensure it is not lost, I would like you to look at and follow the steps in the HP Support document: backup of files (Windows 8), who will be your personal files are up to date.
  
  CAVEAT! If you want to keep the e-mails or bookmarks/favorites that you want to save them as I do not think they are saved in the backup HP process.
  
  Then, I would like to see again you and follow the steps in the HP Support document: performing a recovery of HP (Windows 8) system, which will allow you through to get your computer back to factory settings.
  
  IMPORTANT - your staff of files such as libraries, personalization settings, user accounts and desktop themes are permanently deleted. The settings on the computer are returned for values by default (as it was when it came from the factory). All applications and software installed on the computer when it came from the factory are relocated, and their settings are reset to the default values. In addition, software, applications, programs, and everything you have installed or saved on the computer are deleted permanently.
  
  Once you have recovered your computer, don't forget to run ALL the updates from HP and then run ALL Windows 8 updates. Finally, run the 8.1 Windows Update, and then install all the drivers on page all-in-one HP Pavilion TouchSmart 23 - f217c drivers PC Desktop that I linked at the beginning of this post
  
  If ultimately it does not work the Pen look and Touch of your computer is perhaps not currently compatible with Windows 8.1 and you may have to wait to see if new drivers are validated. I want to thank you for display on the HP Forums. Have a great day!

• video integrated in HP Pavilion 23-f450z TouchSmart All-- One desktop PC in

  I plan to buy HP Pavilion 23 - f450z TouchSmart all-in-One desktop PC

  but before buying it, I was wondering if anyone can tell me what model of video card is on this computer.  What it says on the Web site is "Integrated graphics - AMD" any information would be greatly appreciated.  Thank you in advance.

  Hello

  The basic 23-f450z A6 model - 6400 k would have the GPU Radeon HD 8470D is integrated in the CPU chip.  If the model you choose is configured as the A8-6500 AMD processor, then would be the Radeon HD 8570D.

• Upgrade Ram on a HP PAVILION DV7

  Salvation was curious what kind of ram was ok to upgrade with.

  I tried to look at the site of suppport for this question but was unsuccessful. However if I missed it please tell me the correct link

  My laptop is:

  Description of the model: HP PAVILION DV7 - 6143CL

  Model number: LW181UA

  Running: Windows 7 64-bit

  I visited this site: http://support.hp.com/us-en/document/c02863115

  If it does, this is the page of the plug for my laptop.

  It is said that it takes DDR3 and up to a maximum of 16 GB.

  However when I look at the DDR3 memory for laptops, I find plenty of options in terms of speed and latency cases.

  Modules of memory DDR3 SO-DIMM will work?

  Or a period of latency, speed and all will be better for my system than the others?

  Thanks for all the help!

  The upgrade is to go to the Web sites of memory well known manufacturers and see what they have to offer for your laptop. (Corsair, Crucial, Kingston and OCZ are a few well known memory andf respected manufacturers)

  Do a Google search like I did to see what is available and find the market price. Once you know which specific modules are then you can contact the stores to see which ones they have.

  https://www.google.com/search?q=HP+PAVILION+DV7-6143CL+upgrade+memory&oq=HP+PAVILION+DV7-6143CL+upgrade+memory&aqs=chrome..69i57j69i64.7781j0j4&sourceid=chrome&es_sm=122&ie=UTF-8#q=hp+pavilion+dv7+ram+upgrade&revid=171357479

  Purchase memory modules only well-known state of manufactured products is guaranteed compatible memory for your laptop. If you don't like that then you are taking a gamble.

  If you try to upgrade by looking at the specifications document, so you will probably find that the memory modules that you choose will disappoint you and cause your laptop to not start Windows.

  "DDR3 SO-DIMM memory modules will work?" They must be specific and have been tested with your laptop. That's how important memory manufacturers are able to guarantee compatibility with the module.

• I use mac pro 4.1... RAM DD3 2009 Annual bus 1066.Toi want to upgrade RAM ram... I can't... bus in 1333 was dominated by toi.cam thank you to all

  I use mac pro 4.1... RAM DD3 2009 Annual bus 1066.Toi want to upgrade RAM ram... I can't... bus in 1333 was dominated by toi.cam thank you to all.

  I don't understand what you mean by "I can't... bus in 1333 was dominated by the toi.cam.

• HP Envy 23 all-in-one. : HP Envy 23 all in a single C030. Blank Screen, power light, the fan runs.

  HP Envy 23 all in a single C030. Blank Screen, power light, the fan runs. After that I opened start legacy and power cord from my puss. Help me please.

  Hi there @ZiECloNE,

  Welcome to the Forums of HP Support!  I understand that you are no longer able to boot your computer after a "event for pets.  I'm happy to help you with this.

  Don't forget to check all of your connections, power cord, power adapter, and maybe try another outlet and a direct connection to wall.  If there is no change then the following test: desktop HP - computer starts not (Windows 10.8)

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Pavilion x 360-13-s102tu: how upgrade ram on HP Pavilion x 360-computer laptop 13-s102tu and what ram module supports this laptop?

  Hello, can someone help me to upgrade ram on HP Pavilion x 360-computer laptop 13-s102tu and also if anyone is familiar with how many slots there and what ram module supports this laptop?

  Hello

  Please use the part number and procedure on page 38 of the following guide:

  http://h10032.www1.HP.com/CTG/manual/c04825536.PDF

  (Note: same procedure for s1xx machines).

  Kind regards.

• HP all-in - One PC 19-2113w 19: white/black screen after upgrading RAM

  Hello

  So I have upgraded RAM using 2 x 4 GB SODIMM DDR3 Corsair 1600 Mhz, after installing the PC boots but screen is white/black

  steps to follow:

  1. I tried with 1 socket by using only a RAM, screen black

  2. I tried with 2 socket using RAM only one with the same RAM step 1, screen black

  3. I tried step 1 and 2 using the other RAM, screen black

  now here it gets interesting

  4 tried 1 socket using Original/factory RAM, screen black

  5 tried 2 socket using Original/factory RAM, screen black

  6. tried without any RAM at all, looks like a lack of RAM, screen black

  Now, to each measure adopted, I must say that the screen sound not only not showing things, but its totally black as it does at all, until the system starts normally. !

  Is it Possible the upgrade of RAM affect the screen? or maybe when I was replacing the RAM I hit some conecting by cable to screen or something?

  HP 19 all-in-ONE PC

  Product No.G4B06AA #ABA

  Model n ° 19-2113w

  10 64-bit Windows

  Update

  Removed the battery and hold the power for 30 sec button (BIOS reset if I'm not mistaken?) now it works with the orginal of RAM so I guess my new RAM that's the problem!

• Help... In Lenovo brightness control button all in a single C360-4061 does not

  Hello

  I bought all in a single C360-4061 and the birght full screen, it hurts my eyes... I tried to push the command button birghtness but not working.i tried the shortcut (fn + home and fn + end) but doesn't work no more.

  anyone can help to solve?

  thanx

  Best regards

  ... EUREKA!

  found the solution...

  Download the driver from this link... the brightness control works...

  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&ProductFamily=graphics&ProductLine=deskt...

  I hope this will help others with the same question...

  Thank you

  Best regards

• Upgrade RAM hp pavilion 14-e014tu

  Hello! can someone help me please in the upgrade of my ram.i don't know which brand is better for my my hp pavilion 14-e014tu. IM planning to buy 4 GB of ram.  is it safe to buy the brand diffirent? any suggestions?

  2 GB ddr3 1600 mhz currently installed.

  It is usually best to install 2 identical memory modules work in what we call dual channel mode. However, if you add another module of the same speed and size it can run as dual channel, even if the mark is not the same. This memory will work for you. I guess this would be 4 and 1 x 2 gig module is already installed:

  http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=8763015EA5CA7304

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Pavilion DV6: upgrading RAM for Pavilion DV6

  I'm looking to update my RAM and would appreciate any help in determining what to buy to upgrade my RAM full system. It is a product B5S11UA #ABA Pavilion DV6, totally stock number. I think that the vehicle currently has 6 GB of RAM. Thank you!

  Hello

  It's a HP Pavilion dv6-7010us and Yes, it currently has 6 GB of RAM. It supports up to 16 GB in two locations (8GB) and accessible/extendable user. Please use the manual next (page 4) for work on the configuration of your need and go to page 51 to find a part # and how add/replace RAM

  http://h10032.www1.HP.com/CTG/manual/c03582006.PDF

  Kind regards.

• I'm having a problem with my hp psc all in one single 2210

  Hello!

  I'm having a problem with my hp psc all in one single 2210

  First of all, it does not use my tongue (I think he speaks Spanish or Italian)

  so, if anyone knows how to change the language please tell me.

  Secondly, I can't scan the computer says it cannot connect to the scanner and the printer indicates a failure of the scanner massage.

  Hello ComputerLover.

  To restore the language, follow these steps:

  1. press Setup.

  2. press 5, then 5 again. This selects the Language value & country.

  3. you will see a list of languages. You can scroll through languages using the arrows.

  4 using the keyboard, enter the number to two digits to the desired language.

  5. Press 1 for Yes or 2 for no.

  6. continue to select the countries or regions.

  The failure of scan, please see this document.

  http://support.HP.com/us-en/document/c00587971

  Bravo!

• How to shut up or disable the phone ringing on my all in one single c410a?

  How to shut up or disable the phone ringing on my all in one single c410a? Already there is a phone in the room. How can I disable it?

  Hello

  On the printer Panel, click the Setup program () button.

  Press the arrow down until Adjustment of Fax base appears on the screen, and then click OK.

  Press the arrow down until the Volume of sounds Fax is displayed on the screen, and then click OK.

  Adjust the Volume as Off, and then click OK to apply the changes.

  Kind regards

  Shlomi